20M Mini-Beam DIY Project - Part 1

The first in a series of videos where I build a 20m Mini-Beam based on the design of Gary KJ5VW. I was put onto this design by two local amateurs Lenny and Fred, so my thanks to them both!
In this first video I start the build and I'm trying to do this at minimal cost, so hopefully producing something that anyone can have a go at. I hit some snags along the way and change tack here and there...
Part 2 can be found here: • 20M Mini-Beam DIY Proj...
Part 3 can be found here: • 20M Mini-Beam DIY Proj...
This is one of many amateur/ham radio related videos on my channel. Please feel free to browse 👀, like 👍🏻 and subscribe (it's free!), remembering to hit the bell 🔔 so you’re notified of new videos as soon as they're published and you don't miss out.
Thanks.
Ian.

[@TheKc2pxp]

Nice job with your beam. I watched all three parts of your video. I saw when you were comparing it to another dipole that you were only seeing about one s unit of difference. What's the other dipole vertically or horizontally polarized? Just curious why you didn't see a bigger difference. Thanks again for the video as I am building a 20 M dipole beam myself

[@ianxfs]

Thanks. Yes the dipole was horizontal. The reason was the lack of height on my temporary mast. A higher mast will give far better performance I believe 👍🏻 Have fun 😁

[@KN4YEM]

Do you still have this Beam?, Did you sell it?

[@ianxfs]

Yes & no.

[@DonDegidio]

Hi Ian, Nice project. May I suggest next you drill the holes for the nylon ties, drill them a little less spacing so the nylon tie hugs the cane. Should prevent that movement. Stay safe. 73 WJ3U

[@ianxfs]

Good tip Don 👍🏻

[@garyh8315]

A great vid Ian. Like your explanations into your decisions. Looking forward to Pt.2. 73, Gary

[@ianxfs]

Warts ‘n all Gary 👍🏻😁

[@M7BCN]

Hi Ian, looks a very interesting project and also something that’s a reasonable size to put up.👏

[@ianxfs]

Yes Brian. Watch this space….

[@andy2E0JIU]

Nice start Ian,looking forward to the next part 👍

[@ianxfs]

Thanks Andy!

[@jeffcibulka5063]

Thanks Brother. 73

[@ianxfs]

👍🏻

[@nigelbrooks6756]

Nice one , I will be interested to hear how well it works , I keep meaning on making one I am intending on using ampro whips for easy dismantle 73 de 2e0nbk

[@ianxfs]

Thank Nigel. Tested today, so watch this space….😀

[@michaelkilpatrick5331]

Excellent video! Looking forward to part 2. de VK2DJP

[@ianxfs]

Thanks Michael! Watch this space….😀