#224

[@KAMiJUINs]

If you want to try the easiest and simplest ESC and remote installation with powerful performance and a variety of features... please tune in. And I think It might be a game changer for the DIY scene. Flipsky products discount code: KAMI (For discountable products, refer to the description box.) 강력한 성능과 다양한 기능을 활용해 볼 수 있으면서, 가장 쉽고 간단한 ESC와 리모트를 설치해보고 싶다면... 자세히 시청해주세요. 아마도 이조합이 DIY씬에 게임체인저가 될수도 있을것 같습니다. 플립스카이 할인코드: KAMI (할인이되는 제품들의 리스트는 설명란에서 확인하실수 있습니다.)

[@Brennen_Nisporic]

Nothing I love more than a great diy build. Sometimes it’s fun just to experiment with different wheels battery remotes ect. Keep up the great videos

[@KAMiJUINs]

Thank you for saying that and watching :)

[@EyebrowsMahoney]

I've been scouting your videos for a little while now and want to tell you how appreciative I am for your work. I love the style, it's very calming and I enjoy the attention to detail you have. I also really enjoy the riding videos! Your doggo is also absolutely adorable, and I love seeing it all! Thank you, and keep up the good work!

[@KAMiJUINs]

Thank you so much :)

[@just_golds]

Great video again KAMi,your the best e-skate content creator out there all without talking but actions speak louder than words in my book,and like your no gimmick videos.....Funnily enough only this week I was looking at these on Ali-express and I'm interested in buying parts to put my own DIY together and this looks almost plug and play after you've got all the parts.Ideal for me I think. So basically if my Hadean had the room I could swap out the ESC with this flipsky one and probably get more out of it 🤔 again great video 👍

[@KAMiJUINs]

Thank you for saying that and watching too :)

[@skfunk4550]

I might have to get it just to try it on my velar. seems like a very good option for someone who understands nothing to vesc tool. thanks for this

[@just_golds]

Yeah me neither but what a great product to start to understand what all those different parameters mean.And if its as good as it looks there with more than enough power it looks as long as you've got a good battery,motors and good gearing.... I bet you could leave most boards standing! Depending on what deathwish settings you want out of it.😂 I definitely would love to approach the 50mph mark with the right set up.🤔

[@hellcatmd7635]

This looks more difficult to program compared to vesc,in my opinion .vesc you just plug to computer and all settings are there

[@KAMiJUINs]

I thought the same thing as you. Thank you for watching as always bro :)

[@Cdenham2221]

Just placed my order using your discount code. Thanks!

[@KAMiJUINs]

Thanks :) Hope you enjoy your build !

[@_Zer0202]

I'm late but I never miss my brother's appointment, good review bro 💪 😎 👍 👌

[@KAMiJUINs]

HaHa, I appreciate that bro :) Thank you as always!

[@eBoard3R]

*Always surprising me with the song choices bro!* 🤟🏽⚡️⚡️🤟🏽 Another mini movie 👏🏽👏🏽 Kami is right, that horn was loud 😂 Your knowledge, and ability to then build these artisticly still boggles my mind 🔥 Ahh the Gold TSG Pass... I saw pics of the Pass 2.0 in gold... your original TSG Pass looks better. That horn 😂 gives me a heart attack lol. I think I want one! Some people in East London just step in front into bike lanes and the road without lookin.

[@KAMiJUINs]

Thank you bro :) It was almost like a car horn in real life. If you use it, the other person might get angry or can fall in surprise lol. I saw that too... something sleek and neat looked gone.

[@hyun-87]

12V는 2A까지 지원을 하기때문에 전력(24w)을 너무 당겨 쓰지 않게 조심해야 합니다.

[@KAMiJUINs]

네~ 정보 감사합니다.

[@kareljandura7613]

nice video thanks so much...this be better than original manual

[@KAMiJUINs]

Thank you for saying that and watching it too :)

[@africans1968]

When I change the parameters on the remote it doesn't backup. Any suggestions? Thanks for your videos like always 🎉

[@KAMiJUINs]

Parameters are meaningful to the extent that they activate the motor setting, and it seems more accurate to do the exact numerical input in the ESC Setup part.

[@paulr3556]

Also what what be the max battery amps for an Ownboard Carbon AT using stock battery of 10s4p. Probably not very strong, way less than 90amps? Guessing this part is important, as it could draw too much from battery, and damage battery?? Should I drop it?

[@paulr3556]

Hello, awesome review n demo video as always. Quick question, how does reverse work? No having to click any of the two buttons first? Is it if you hold brakes on for a certain amount of time?, and how, does it know when motors are at full stop? Otherwise if you go down a hill and keep brakes on for that time frame, it will kick into reverse while you still going forward? And potentially throw you off? I plan to use this combo to replace Ownboard original carbon AT remote n ESC (It has newer ESC with remote with screen display.) It's a only a 10s board, so after setting ESC to 10s via remote, can I use the 60amp motor max and 120amp battery current max settings on the stock Ownboard battery?, or should I drop it to the 50A motor max n 100A battery current max? Thanks in advance.😊

[@KAMiJUINs]

Hello, thank you for watching my videos. In the case of reverse, if you keep pulling the remote throttle, the board will brake and then reverse according to the set reaction time for reverse operation. (It does not move backward immediately after stopping. You can set the interval seconds.) In the case of hills, it depends on the slope, but if the slope is large, you may not be able to reverse. If the slope is gentle, you will be able to move backward after stopping, but the backward speed will be slower than on flat ground. To determine the output amps of your ESC, you need to know the type of cells and configuration of the battery pack you are using. With that, you can find the maximum discharge rate and the amount of available current accordingly.

[@thetredog]

Thank you so much for this video!

[@KAMiJUINs]

Thank you for watching too :)

[@paulr3556]

Hello again, I have installed this combo in a Ownboard Carbon AT on stock 10s. Works well. I want to build a 12s battery in a box mounted where your one is. Apart from changing cell number in first menu, do I need to redo anything else, like set up ESC again. In other words, can I swap between 10s and 12s easily? Just cell number change? Cheers again 😊

[@KAMiJUINs]

Hello~ :) The battery in the video is of 14S configuration. Changing the ESC settings from 10S to 12S is very simple. All you have to do is change the voltage in the remote settings.

[@asdsdasdasda8040]

Hey! I have the Omni TKP trucks as well. Would you recommend getting the Acedeck gear drive that you have fitted here over the Omni's own gear drive? The acedecks looks cooler tho but how about the fitment and clearance in real world use?

[@KAMiJUINs]

The free space was almost the same for both gear drives. The feeling of use was a bit softer and quieter for Acedeck. First of all, I recommend Acedeck's Gear Drive more. The reason is that if you ride for a long time, the gearbox generates a lot of heat like a motor, and Acedck's Gear Drive has a structure that can manage heat well.

[@asdsdasdasda8040]

@@KAMiJUINs Thank you sir.

[@blazbohnec]

Any idea if we could flash custom firmware via stlink to get it to work with VESC tool. Flipsky tool is terrible, no lisp, no field weakening, no anything, its just too basic for wide range of potential buyers, I wish I could use VESC tool with it and not this no brainer fliptool.

[@pablotope3070]

Kami, great video. I am having trouble getting my vx4 remote to get my motors working. I can pair the remote but motors won't spin. Went into VESC tool to make sure on uart but nothing and not spinning. Not sure what else to do. Any help super appreciated. I have a maker x dv 4 esc.

[@KAMiJUINs]

-First, make sure all the wires are well connected. -And check the ESC type and control type in the settings of the VX4 remote. -If it still doesn't work, you should proceed with refaring. -If all of the above methods do not work either, use VESCtool to reset all settings. I don't think it's a motor failure.

[@pablotope3070]

@@KAMiJUINs much thank and super appreciated!

[@outsidehydro]

Hi, I remember a while back, you made a project using 2 10s batteries in parallel. With this product being able to handle 20s, would it make more sense to put the batteries in series for a 2 battery project? Would it make any difference for torque and speed?

[@KAMiJUINs]

If you configure it as a series 20s, the motor rotation speed increases according to the increased voltage, so you can increase both torque and top speed depending on how you configure the gear ratio. Also, if you configure it as a parallel 10s, you can use twice the discharge rate compared to the series. A setting with a high discharge rate is relatively advantageous for a setting that requires strong torque. (Since the discharge rate of lithium-ion cell batteries is relatively low, even if it is a 20s voltage, it is meaningless as 1P. And you need to check whether the motors you will use support the 20s voltage.)

[@esk8Kyle]

Really interesting product at that price... It looks very similar to spintend vesc but flipsky just put its own software on top. Did u test it at full 100a per motor?

[@KAMiJUINs]

I tested it with a battery pack with a total discharge rate of 180A. And I set a total of 120A for the current. This was really powerful for a street type E-board. And I think 100A per motor would be fine if you went over to an off-road board. And I've tried both of those ESCs, but I felt like this and the Spindend ESC were on a completely different level. This was because the tool program was fully built into the remote. Thanks :)

[@WEEBNOVELSANDSERIES-hm4tp]

so satisfying

[@KAMiJUINs]

Thank you for watching :)

[@worachart111]

Nice setup

[@KAMiJUINs]

Thanks bro :)

[@PlaCrown]

Considering it takes 20S, This is very interesting product.

[@KAMiJUINs]

Yeah, i agree. I also couldn't believe the price considering ESC's SPAC. I think Vesc's royalties were very expensive lol :)

[@PlaCrown]

@@KAMiJUINs One Question about this kit, Are the lights worth it? Like is the range usable on them?

[@kessil8088]

Hello, is it possible to use this controller with the kugoo g1 scooter, which has 2 wheels of 1000-2000w each with a 52 volt battery?

[@KAMiJUINs]

I think it's possible :)The voltage is within the allowable value. It can be connected to two motors because it is a dual type.

[@Bikelife-TEZ]

Been watching your videos for I while now I need your help can this fit in the acedeck ares x1 2wd belt drive board I'm on my second esc got this last esc about 3 weeks ago now this morning my boards not pairing I need to change from the acedeck esc to something else what's your take on this

[@KAMiJUINs]

It is expected that there will be no problem with using it due to the specifications. However, the question is whether this new ESC can be inserted into the original ESC space. (If it is a pairing problem, the remote control should also be replaced with VX4)

[@Bikelife-TEZ]

@KAMiJUINs yes its a pairing problem can the vx4 remote work with my acedeck esc

[@jamesmac7040]

What lights are they and how do you find them? How do you hook them up to your battery?

[@KAMiJUINs]

Lights are optional when purchasing an ESC. Also, as described in the video, the lights are directly connected to the ESC. (If you watched the video carefully, you could see that both are well described.)

[@thiagomnzs]

In therms of throttling, this is enough to off road? I lost my 75100 single esc recently

[@KAMiJUINs]

I think this is enough to replace 75100.

[@RNYJ05ET]

Hello, can you tell the price of this skateboard for the total shipment in France 🇫🇷. How much does it cost thank you😊😊

[@KAMiJUINs]

Do you mean the board or the parts? I will leave the link to the parts that I used. Maybe you should ask them Deck, Truck, Bettery with the box omniesk8.com/products/omni-esk8-electric-skateboard-carbon-deck omniesk8.com/products/omni-esk8-double-kingpin-precision-cnc-truck-diy-electric-skateboard omniesk8.com/products/top-mounted-battery-pack ESC, Remote flipsky.net/collections/non-vesc/products/flipsky-ft85bd-esc-with-aluminum-case-non-vesc-for-electric-skateboard-scooter-ebike-speed-controller-electric-motorcycle-robotics flipsky.net/collections/remote/products/screen-remote-vx4-pro-for-electric-skateboard-ebike-eboat-compatible-with-vesc Wheel set www.icloudwheel.com/collections/cloudwheels/products/cloudwheel-hydro-100mm-urban-all-terrain-off-road-electric-skateboard-wheels?variant=44238180614382 Gear drive kit acedeckboards.com/products/element-2-in-1-gear-drive-kit

[@ino9138]

which vx4 remote should I get? there are two type on the website, for vesc4 and vesc6

[@KAMiJUINs]

go to Vesc6 :)

[@Cdenham2221]

I am thinking about getting this remote/ESC combo, but the website gives two options for the remote. 1. FOR VESC4( Focbox Unity) 2. For VESC6 or VESC75. Does anyone know which to buy?

[@pengchaolu4882]

1 FOR VESC4

[@Cdenham2221]

@@pengchaolu4882 I’m not sure what the difference is. This is my second build.

[@KAMiJUINs]

You can use both. Instead, you should send an e-mail to their Servis team before purchasing to confirm that VX4 remote firmware 2.1.1 is upgraded.

[@Cdenham2221]

@@KAMiJUINs Thanks. I will.

[@AddWood]

Would this be good to replace with the Eovan silo esc?

[@KAMiJUINs]

I checked Eovan silo's battery specifications and the total discharge rate is 225A, which seems to be enough. I think it's possible. Then, depending on the type of connectors, some connectors may need to be replaced (ESC connector from battery, motor sensor connector, etc.)

[@zfgesk8]

Puppy was not impressed with the horn :) This is a game changer for DIY esk8, cant belive it took this long for someone to attempt to remove VESC.

[@KAMiJUINs]

My dog is scared and just doesn't like loud sound lol :) In fact, I didn't expect this detailed setting to be possible with the remote until I tried it. I was just surprised

[@BlownMacTruck]

I don’t get it. There are Hobbywing and Ling Yi ESCs if you don’t want to get a VESC-based controller. Though I’m not even sure why you would need or want a closed-source alternative to a freely available open-source design.

[@zfgesk8]

@@BlownMacTruck Are they esk8 specific, commercially available, can they handle high current, can you run motor detection through your handheld controller?

[@BlownMacTruck]

@@zfgesk8No, but you can run motor detection on a VESC-based controller with your phone, which is basically the size of a remote.

[@zfgesk8]

@@BlownMacTruck I Agree, although VESC is bloatware and not esk8 specific. It's great if you intend to squeeze every bit of performance from your VESC-based ESC and you're a DIY junkie. However for the %99.5 of folks getting into DIY esk8, VEST is just overkill and a hurdle. I see us getting closer and closer to RC car-style setup - possibly even using a programming card like Hobbywing already does.

[@mojoswifty360]

Would this work on a Propel Endeavor 2 GT?

[@KAMiJUINs]

If the space where the ESC used to be is enough, there is no reason not to use it.

[@jjy365959]

Eovan gt pro 에 있는 vesc 죽어서 이번에 이거 flipsky 아님 makerx dv4s 로 할까 생각중인데 너똫게 생각하시나요?

[@KAMiJUINs]

둘다 괜찮다고 생각합니다. 그러나 리모트도 함께 바꿔야하는걸 감안한다면 플립스카이쪽이 좀더 편리할것 같다고 생각합니다.

[@jjy365959]

@@KAMiJUINs 둘다 수명이 오래가나요?

[@onefootsbf]

Do you know how much current can it provide at 12V?

[@KAMiJUINs]

Do you mean the lights? If that's what it means, I'll have to ask them the details. I'll leave a comment here when I find out

[@onefootsbf]

Yeah, because if you want to use other lights (for example long led strips) you need to know how many amps can you draw from it. I checked their product page but didn't find out, just the 5V bec which can handle 1A. Thanks for the answer! Have a nice day!

[@KAMiJUINs]

12V supports up to 2A

[@onefootsbf]

@@KAMiJUINs Thank you!

[@MCMXCIX84]

모터에 3선을 제외한 커넥터도 하나 연결 하는거 같은데 다른 3선만 있는 모터는 사용 불가능한건가요?

[@KAMiJUINs]

설정에서 센서리스 모터 타입으로 설정한다면 사용이 가능합니다.

[@MCMXCIX84]

​@@KAMiJUINs 답변 감사드립니다. 모터 사양표를 보면 최대전력(A)값만 나오던데 모터에 사양에 따른 esc 선정 기준이 모터 A값에 1.5배 정도 높은 esc를 선택하는게 맞나요? 그리고 모터 최대전류가 188A짜리 듀얼로 쓴다면 지금 영상의 esc 모델은 연속전류는 200A고 피크 전류가 500A던데 사용이 가능 한건가요? 아는게 없어 많은 질문을 드리게 되었네요 ㅜ

[@Michaelajacksonfilms]

Thank you

[@KAMiJUINs]

Thank you for watching too :)

[@Racule]

이런거 보면 진짜 전동보드 라는 취미도 쉬운게 아닌거 같단말이죠 ㅋㅋ

[@KAMiJUINs]

이정도면 엄청 쉬운편인것 같단말이죠ㅋ 시청감사합니다.~

[@paulr3556]

Please explain this "zero duty mode", you have set to release motor at 8:09 timestamp on your video, on this other video, he puts it on "keep output" what is this setting for please? kzbin.info/www/bejne/nXzCgGyNnaeDkMksi=IXP5yOse9G2qB-PC at timestamp 3:20. cheers. Also to cancel auto reverse on brakes after 0.5sec, can I disable this and only have reverse on double click of mode (LMH) button only? so no auto reverse, manual reverse I guess, like a ownboard remote? Can disable in the current, gear, brake, instead of reverse in there too? timestamp 8:47 in this video of yours above. Or would that disable the reverse switch on remote too? the double click trick for reverse. cheers again, love ya videos. Also what does gear stand for, I just noticed you have current, reverse n brake, no gear? what does gear do?

[@paulr3556]

As long as I have reverse switch set to "on" in the other main menu. UPDATE JUST TRIED IT, and current, gear, brake only selected, and reverse now only on double click on speed mode button, not the on/off switch, or I get a horn as loud as yours, haha.

[@ino9138]

Wow. Not based of vesc

[@KAMiJUINs]

Yeah, it is :) Thank you for watching

[@user-xj7cj4bx3n]

usually diy by Cami was pattern of beauty! but this lights... and especially horn very very ugly

[@KAMiJUINs]

It supports up to 12V 2A, so you can also apply the light you want accordingly :)

[@stephansmith300]

Ubox v2 clone

[@KAMiJUINs]

I don't think so, bro...

[@hyun-87]

UBOX = VESC mutant 이번 버전은 독자규격의 변속기입니다.