22RE 94 Toyota truck High idle

[@johnpowers1343]

On mine what I did was take off your intake manifold the thing that says EFI on it and just inside the big hole there's a little tiny hole that's for your EGR make sure that that passage is open it will greatly improve your performance and acceleration

[@doughunter3967]

we would really appreciate to know the fix since you asked for help

[@mrdanny728]

Mine ran the same and it was a Burnt valve number 3

[@scottbarnes2721]

Mine was doing same thing , I couldn’t find any vacuum leaks But I had a big one it would smooth out when I hit brakes ! It was brake booster causing problem , runs like new only 340000 miles on it .

[@lessismore4842]

Did you ever find the problem? Mine does the exact same thing

[@michaelleavit9609]

That sounds like a diesel

[@jeremysmith-mp7nu]

How did you fix this??

[@craigcarrillo]

I can see a vacuum hose loose and flapping directly over the throttle body.

[@meowbang9836]

...I see that too.......it's either P, R or E hose....P & R just loop to the Vacuum Mod....E to the Canister....(Cal Smog).....but he might have added some extra hosing there....

[@CNAEVR]

LMAO dude I'm crying watching this 😛

[@robertovillalobos6466]

the ring on your idle screw is bad, that's why screwing it all the way in is not lowering the idle rmps some Teflon tape would help

[@larryjohnson4795]

Roberto Villalobos put some Teflon tape on ideal screw screw it bak in,count turns

[@mikop1]

you can buy an oring & replace it at your local hardware store or auto parts store. I would spray carb/fuel cleaner and see if the idle changes. Make sure the engine is warmed up

[@robertfix-all9806]

Any other suggestions. That didn't work for me

[@eliasarcanaz8205]

the same thing happened to mine and I found out that irate was a clogged injector I just put injector clean and she gets up and goes

[@bamm-bamm6953]

I see 3 vacuum leaks Lol

[@sarahross1682]

Needs a new throttle position sensor

[@reinaldogonzalez6045]

Clean the IAC valve

[@sergiosergio5215]

Check the valve adjustment knocking noise it should not doing that

[@slowfiveoh4986]

Take the valve cover off and check the timing chain.