#248

[@KAMiJUINs]

It's been scalding this summer, so I took a few weeks off because of my physical condition. I'm fully recovered now. Thank you to anyone who's been wondering about me and KAMI. In this session, I tested the performance of the Trampa boards we built before. If you want to set up the double wheels as in the video, please refer to video #102. 이번 여름 유난히 더워 몸의 컨디션이 떨어져 몇주 휴식을 취했습니다. 지금은 완전히 회복되었습니다. 저와 까미를 궁금해해주셨던 분들께 감사드립니다. 이번 시간엔 전에 빌드해둔 트람파보드들의 성능 테스트를해보았습니다. 영상에서의 더블휠 설정에 관심있으신 분들은 #102번 영상을 참고해주세요.

[@eskatenigeria6240]

29 mph for that board is quite slow Well I was hoping you would do a give away sometime 😂

[@tedorr5449]

OH! Fabulous!! You make the Trampa Boards look so Orrsom 🙂 If you try single wheels on the front then you will get a lot more steering whilst retaining all the extra traction at the rear & it will also remove some of the extra weight... I often ride with my Barrels in the inside position at the front, (For me always in outside position at the rear to retain stability) specially when i ride off road through the woods where im not riding in a straight line and need lots of turning to get around the obstacles... for sure it makes the ride a little loose when hitting high speeds, but usually im not riding at the highest speeds, so a loose setup suits me very well.. I ride 9 inch mudpluggers at the rear and 8 inch mudpluggers at the front to keep my steering nimble Im sorry to read that your health has not been good, but im very pleased to hear you are now feeling much better, hopefully we can get you to come and visit us in the UK some time soon Brother, let's make a plan to get you hear!!

[@KAMiJUINs]

I understand what you're talking about. I also think the setup of the board you set up can respond well to all terrain. But this time, I wanted to show my subscribers a more extreme side. I think the part that can attract the attention of the electric board is also an important factor that can bring out the satisfaction of riders. That's why I made this suggestion. I'm very much recovered now. Thank you for coming, brother!

[@skfunk4550]

Street version is sick and welcome back, yay

[@KAMiJUINs]

I think so too :) Thank you as always bro!

[@eBoard3R]

*Glad to hear you are fully recovered bro!* 🤙🏽⚡️🤟🏽⚡️👌🏽 When I saw "Street Version" text 🤩🤩 Those wheels look so cool, I feel the new Mad 125mm will have a similar vibe, just less wide. Nice, low to the ground ride 🤩 29.6mph then 36mph 😱😱 Big wheel one the wheels look bigger than my head! Monster board ⚡️⚡️ Kami looked so happy hoppin around at 13mins awww. 🤩

[@KAMiJUINs]

Thanks, bro :) Yeah, I think so too. The new Mad 125mm will have a similar vibe but it will be softer than this. In fact, many boards had faster top speeds than these, but because the torque was so good, it was a bit scary when accelerating. Yeah definitely. The 9-inch double wheels were huge. I think Kami was a rabbit lol.

[@randyvalencia1631]

Bro you always impress me wuth your work! Always amazing build!

[@KAMiJUINs]

Thank you for saying that and watching my videos too :)

[@kenschulman-specializedend6061]

Super Rad man. Thanks for your work!!

[@KAMiJUINs]

Thank you for watching too :)

[@WorldMoneyWins]

Fantastic builds! Love the street board. :-)

[@KAMiJUINs]

Yesssss! Me too :) Thank you for watching!

[@godfriedm9991]

I hope oneday MT eboards can be as light as Kami then we can have more fun on the rough surfaces.

[@KAMiJUINs]

Thank you brother :)

[@shubhajitdas7615]

Pretty amazing design absolutely sick

[@vapgames]

Nice. I've been using double 5" tires on the front of my cruiser board, with madwheels on the back. Those 5"from ali are too narrow and weak to use in single mode. But in double config it's amazing, so much grip and comfort, while it's still a compact cruiser that can squeeze anywhere and turn on a dime with a kicktail.

[@KAMiJUINs]

Wow, that's an unexpected combination of wheels. If I have a chance, I'd like to see your board. Thanks for watching :)

[@ujung5683]

Super power🚀 amazing　ｂｕｉｌｄ👍

[@KAMiJUINs]

Super thanks :)

[@_Zer0202]

good review bro always 😊😊😊😊👍👍👍👍👍👍👍👍

[@KAMiJUINs]

Thanks as always too, bro :)

[@Locksmith92]

Ok..let's see the wheels..😅😅😅😅🎉🎉🎉

[@KAMiJUINs]

Thanks :)

[@Locksmith92]

@KAMiJUINs can you recommend a battery and esc that would fit in my Evolve Carbon Gt ..I really like the board but it sucks..Just got the Nomad N1 and I want to Diy the Gt..please and thanks 😊 🙏🏾

[@KAMiJUINs]

As for the battery cell, it seems that the trend is to use the Samsung 21700 50S cell, which has good capacity and discharge rate. I also think the 50S cell is the most ideal for now. ESC's recommendation is a bit of a difficult issue. The reason is that ESC's experience values vary greatly among riders. If I recommend it from my own experience... If you have enough budget, recommend VESC, (trampaboards.com/vesc-6-hp--high-power-pcb-p-34613.html) and if you're looking for an ESC for cost-effectiveness, check out Flipsky's ESC (flipsky.net/collections/non-vesc/products/flipsky-ft85bd-esc-with-aluminum-case-non-vesc-for-electric-skateboard-scooter-ebike-speed-controller-electric-motorcycle-robotics) Remote (flipsky.net/collections/remote/products/screen-remote-vx4-pro-for-electric-skateboard-ebike-eboat-compatible-with-vesc)

[@teamalexfam170]

If Batman had an electric longboard it would be your off road trampa

[@KAMiJUINs]

Listening to you, it seems like that's the case :) Thank you for watching!

[@sam1404]

А что происходит если ремень рвётся при торможение?

[@KAMiJUINs]

Ну, ремни, которые я использовал, толщиной 20 мм, и я думаю, что это слишком много, чтобы отрезать их с моим весом. И если вы обеспокоены этим, я рекомендую использовать высококачественный пояс из Германии или Японии

[@sam1404]

@KAMiJUINs не,я использую hub(моторколесо),этот вариант более надёжный!Плюс не этого неприятного звука!

[@sam1404]

@KAMiJUINs к торможению от моторколеса можно привыкнуть!А вот ремень-есть ремень!Если же поставить цепь звук будет ещё хуже,срок службы меньше!

[@sam1404]

@KAMiJUINs А если использовать ремень ABS торможение,он сточится быстрея!

[@johnglover4318]

I think these boards are more like a Jeep than a skateboard. What about your physical condition? Cheers

[@BlownMacTruck]

You realize Trumps gear is designed to be used on mountain boards, right?

[@johnglover4318]

@@BlownMacTruck I do but, still they are not skateboards they are off road vehicles.

[@BlownMacTruck]

@@johnglover4318​​⁠You heard it here folks. This guy said it so it must be true.

[@KAMiJUINs]

Thank you for your concern. I am fully recovered now. This summer has been hell... I did this build too imagining a buggy or jeep running down a ramp. So it's true it looks more extreme. Thanks for watching :)

[@johnglover4318]

@@KAMiJUINs I am very sorry to hear that but glad you are better. I respect your build and what is meant for. Cheers

[@TheAegisClaw]

Hands up who had to Google "heterogeneity"? 😂

[@KAMiJUINs]

I couldn't think of a word that could be expressed in English, so I wrote it with the help of a translator lol Thank you for watching :)

[@worachart111]

Very nice

[@KAMiJUINs]

Thank you bro :)