$25 Patina CLEAR COAT!! - Easy DIY LONGLASTING Top Coat - NO GREASY FINISH! - UTX

Welcome back to Ugly Truck! Today Emily's back on the 1965 C10 and ready to tackle preserving this patina. After we got this truck running, we took it to the carwash and it looked much better. But why stop there! Armed with nothing more than a box of SOS Pads ($4) and some high traffic floor polish ($20), Emily gives this old Chevy a serious transformation! This is commercial grade polish, so this finish should be pretty durable. We're hoping for many months (or years!) before we need to recoat. We ended up with a nice satin finish, which dries quickly with no greasy, oily film like other wipe on recipes. With this method, there's no mixing products. Just scrub it down with SOS Pads until you have the look you're going for, then grab an old sock and start wiping on some ZEP High Traffic Floor Polish. For a $25 total investment, this is a great way to seal and protect the look of any rat rod on any budget.
Check out the 2 YEAR UPDATE here! • PATINA POLISH UPDATE -...
Here's a link if you want to check out the MotorTrend article! www.motortrend...
Follow us on Facebook! uglytruck
Check us out on Instagram! @uglytruckexperience
Want to send us something? (NEW address!)
7915 E. Division St.
Strafford, MO 65757
#patina #ratrod #motortrend #transformation #chevy #c10 #65c10 #patinatrucks #chevrolet #revival #smallblockchevy #chevytrucks #classicchevy #powerwash #pressurewash
BQZFPTQMICLQHRDR
LV50UYY4P7IIZTXK
UCDQYUCCK7VMPAXK
P2AMPRPMULRQHGUZ
QQQRGBPH5FC28WA6
BLXIGPFEHMZ0DA3L
EOAG8PC2DDDUYHCV

[@UglyTruckExperience]

👀 Looking for an update? ▶ Check out the 2 YEAR UPDATE and recoat here! kzbin.info/www/bejne/eZKkeqZorrGrqpI

[@justin_steen]

This might be the best thing I’ve seen for “clear coating” thank you for sharing🙏

[@UglyTruckExperience]

Thanks Justin. It has worked great and is still holding up to the weather. Emily

[@justin_steen]

@@UglyTruckExperience I did my truck two days ago, and uploaded a short it’s never look better in my ownership!!

[@jkgkjgkijk]

I had this same truck in the eighties, as a teenager. Mine had 3 speed on column. Motor was run down. I drove it a few years and then drove it into the landfill and gifted it to them. Looking back, dumb move.

[@UglyTruckExperience]

The "3 on the tree" is a blast to drive! I had one in my 70 C10 before we LS swapped it. It would be the ultimate anti-theft device these days! 🤣 Thanks for tuning in!

[@corydriver7634]

I let a few get away back in my younger days too. What’s that they say about hindsight…

[@MoonmanSpacejam]

Damn

[@GFox-cg7qf]

I have used Zep on a 2001 Ram with flaking paint and got a year and a half, easily. I'm glad you shared this!

[@UglyTruckExperience]

Awesome! I've been really happy with mine! Thanks for watching! --Emily

[@rickn8or]

You had me at "I don't wanna do this every two months." I've abandoned plans for BLO/Mineral Spirits project and am going to try your method instead. Extra points for doing it during this time of year; I know your part of Mizzourah isn't exactly tropical now.

[@UglyTruckExperience]

Yep, and I meant it! It's been over 2 years now, and it still looks great! The colors are still bright and there's no peeling or yellowing at all. There is some surface rust coming through on the rough spots, so I'll give it another scrub and recoat one of these days. If you give it a shot, let us know how it goes! Thanks Rick! --Emily

[@andypayne4390]

I just did this to my old truck. It worked great. It looks great! Cost about $35 for everything at Lowe’s. Sponges don’t work well as she stated but work well to clean up any runs when you first start. It had about a 10 minute learning curve

[@UglyTruckExperience]

That's awesome! I'm glad it worked for you too! Do you have any pictures? We're @uglytruckexperience on Instagram and fb.com/uglytruck.

[@jamielockey2003]

Fantastic looking truck! And great to see a lady loving her patina truck! Good job! 😍

[@UglyTruckExperience]

Thanks Jamie! We appreciate you tuning in!

[@matthewborne7659]

Absolutely fantastic patina !! Love love love the old Blue patina trucks. Puddin would be proud !

[@UglyTruckExperience]

It's such a cool truck! Thanks for watching!

[@malcolmdastur4411]

I absolutely love your video, you have done a fantastic job on your Chevy. It's really nice to see a girl loving her patina truck.

[@UglyTruckExperience]

Thanks Malcolm! We appreciate you tuning in!

[@critterIMHO]

SO glad you kept the patina. And I am really impressed with the results. This old dog just learned something from a whippersnapper.

[@UglyTruckExperience]

Haha, thanks Crispy! I've been really happy with the results! Here's a link to the 2 year update if you're interested. kzbin.info/www/bejne/eZKkeqZorrGrqpI --Emily

[@FreezerCow]

Thank you for sharing this. My old truck now looks so good!

[@UglyTruckExperience]

Awesome! We'd love to see it! Send us a pic on our Facebook page if you like! fb.com/uglytruck We appreciate you watching!

[@johnmunder7107]

You did a really good job. I like the way the Zep is more flat or satin then the Pappi's Patina glossy finish. Looks way more natural and clean. Cool truck!

[@UglyTruckExperience]

Thanks John! I didn't want it too glossy, just wanted to brighten the colors and give it some protection from the elements. With the Zep, the more coats you do the glossier it gets, so you can get the look you're going for. Thanks for tuning in! --Emily

[@DanielPriddy-do7rw]

I got my father's 1969 C10 short bed and I wanted to thank you for this information because that's what I'm going to do. Also...I would be remised to not mention that you are beautiful!!! God bless you and thank you. It looks amazing!!!

[@UglyTruckExperience]

Thank you Daniel. We appreciate you watching. Let us know how the 69 turns out. No matter what, a 69 short bed is always a good thing. Emily and Jerry

[@joshuacrai]

I am getting a 1958 f100 that I’ll be reviving. I was wondering what I was going to do about paint because I don’t want to put that much into it. But this will work perfectly. Your truck looks great!

[@UglyTruckExperience]

Thanks Joshua! I've been really happy with mine. Let us know how it goes! Thanks for tuning in! --Emily

[@KarlBrouillette]

Good job, great tips and I wanted to point out you have an amazing attitude. I love how you value the story behind each part of your truck. Keep up the amazing work.

[@UglyTruckExperience]

Thanks so much, Karl! We appreciate you tuning in!

[@kayleesgarage9612]

Wow!!!! You did an amazing job on your truck. I have a 62 gmc that may get that treatment soon. Definitely looks beautiful 😍 Kaylee approved

[@UglyTruckExperience]

Thanks! I was really happy with how it turned out. It's sat outside through almost a whole year of Missouri weather, but I just walked past it a few minutes ago, and it still looks the same. Our 60 GMC is probably next on the list. If you give it a shot, be sure to send us some pics! Thanks for watching!

[@billthompson7579]

Great video. Watching the background on highspeed was entertaining. Jerry pointing around was the funniest

[@UglyTruckExperience]

😂 Thanks for watching! There's always something going on in the background!

[@luckylenahan]

That looks amazing! I'm thinking about sos pads on the rusty spots on my 83 c10 and comet wash on the rest because the paint is so thin. I will definitely use zep. Seems like just the look I'm going for! Thank you for sharing this method.

[@UglyTruckExperience]

Thanks for watching, Jeff! This truck's been outside for over a year in the sun, rain and snow, and it still looks great. Best $25 I could have spent on it! If you give it a shot, send us a pic on our Facebook page! We'd love to see how it turns out!

[@jamesterry5282]

Thanks for the vid! Looks great. My wife has a 81 Dodge and we are going to do this!

[@UglyTruckExperience]

Thanks for watching! Be sure to let us know how it goes!

[@ericdolby1622]

Awesome job!. I will follow your procedures on my 56 Chevy 210!

[@UglyTruckExperience]

Thanks Eric! Let us know how it goes! I just posted a 2 year update on this truck, if you're interested. kzbin.info/www/bejne/eZKkeqZorrGrqpI

[@didierlucas9653]

Very beautifull classic truck and this patina is WOW 👍👍👋👋

[@UglyTruckExperience]

Thanks so much! We appreciate you watching!

[@3gunshooter60]

That's a great idea. Looks great for just a few bucks. Enjoy your shiny old/new truck

[@UglyTruckExperience]

It really turned out nice, and 6 months later it still looks as good as the day I did it! I'd say I've already gotten my money's worth out of it. 😁 Thanks for watching! --Emily

[@raul794]

This looks amazing! I'm gonna be doing this hopefully in a couple weeks to my 1981 datsun 4x4.

[@UglyTruckExperience]

Awesome! Let us know how it goes! Thanks for tuning in!

[@slimsantilli4476]

My brother has a '62 GMC with the original 305 V6. It gets a lot of attention at carshows. Looks like you did a good job on your presentation.

[@UglyTruckExperience]

Thanks Slim! We have a 1960 GMC with the 305 and a 4 spd, and it's definitely a head turner! 😆 They're cool old trucks! Here's a link to a video on it if you're interested. kzbin.info/www/bejne/iZvPmWOKgsSknMk We appreciate you tuning in! --Emily

[@gmray7301]

It looks great! Thanks for the tips

[@iaintnofortunatesonkc807]

That's my favorite C10 model the 1965 I guess cause I am also a 65 model too. But like what you did. No fancy paint jobs or shiny things for this old work horse. Looks good.

[@UglyTruckExperience]

I'm so happy with it! Two coats gave it exactly the satin finish I was going for. 👍

[@boyracer3477]

@@UglyTruckExperience Is there a down side to putting on more coats? Would it provide more protection or get too shiny? Or maybe get opaque or yellow from the layers? While I was at it I'd be inclined to put on extra coats since it would already be prepared and that is that hard part.

[@UglyTruckExperience]

A couple people have told me that yes, it will get yellow and hazey over time, so I kept it as light as I could. But it's been sitting in the sun and rain and snow for 4 months now and still looks like the day I did it. It dries pretty quick, so I'd try a couple coats and see what you think. If you give it a shot, let me know! We're on Facebook and Instagram, and I'd love to see how it turns out!

[@Bhunter957]

Pretty badass,you too girl, nice truck, love y'alls channel, git it!

[@UglyTruckExperience]

Thanks Hank! We appreciate you tuning in! --Emily

[@geebopbaluba1591]

It really does look very nice! Good luck with the car show. I’m sure you will see a lot of thumbs up.

[@denverfowler5290]

Great Job , Loving Your Patina Work Truck !

[@UglyTruckExperience]

Thanks Denver! We appreciate you watching!

[@alexpage9892]

So it's 2 years later. How's it holding up? Great install video, thanks. I'd just like to know how ol Zep is doing in the sun.

[@UglyTruckExperience]

Thanks Alex! It's still looking pretty good! The sides and tailgate still have a nice satin shine, but the hood and roof are starting to dull. But colors are still bright, and nothing has yellowed or peeled at all. I'll wash it and recoat it one of these days, but overall, still super happy with my $25 investment. If you give it a try, let us know how it goes! Thanks for watching! --Emily

[@christinewoodruff255]

My 56 had beautiful faded ocean green paint on it, only rust was over headlights and cab corners, i had it repaired and painted, but it was the 90s, different time, now i still regret it but it still looks good with the new paint.

[@UglyTruckExperience]

I wish there was a way to fix the rust and not lose the patina! This truck is going to need some serious repair to make it roadworthy again, and I dread it. We appreciate you tuning in! --Emily

[@jamesmcclure995]

Really Cool I just started this with my 66 Ford F100. I'm painting the wheels and the bumpers but doing this on the body.

[@UglyTruckExperience]

That's great, James! We'd love to see how it turns out! We're @uglytruckexperience on Instagram and fb.com/uglytruck.

[@huntingadventures1172]

Looks great and I love The mid 60s chevy truck

[@UglyTruckExperience]

It's a great body style! Thanks for watching! --Emily and Jerry

[@WilliamMunny-d8s]

vice grip recomends a 2or 3 to one mix of boiled linseed oil with mineral spirits. not too greasy, lasts for 3-6 months

[@UglyTruckExperience]

I have seen a lot of people use that recipe, but I didn't want it to be greasy and wanted it to last longer. This Zep floor polish has been great! Here's a link to the 2 year update if you're interested. kzbin.info/www/bejne/eZKkeqZorrGrqpI We appreciate you tuning in! --Emily

[@davidjulseth8667]

Looks great, will look a lot better when your driving it...

[@UglyTruckExperience]

Thanks David! I agree! This has turned into a back burner project, but we have plans for it. We appreciate you tuning in!

[@ernestdamiani]

Just picked up an old Crown Vic P71 cop cat and I’m seriously thinking about doing the same thing. Awesome job and great video!!!

[@UglyTruckExperience]

Thanks Ernest! It was definitely worth the $25. If you give it a try, let us know how it goes! Emily and Jerry

[@ernestdamiani]

@@UglyTruckExperience I’ll definitely let you all know!

[@steelmill]

Nice job on the paint,I'm in the middle of a fake patina on a 85 Squarebody.A light coat of enamel and a green Scotch pad scuffed front to rear direction works pretty well

[@UglyTruckExperience]

Awesome! I've thought about adding a little extra patina on my 70 C10, but I've always been scared to start sanding. Are you scuffing it down to bare metal or do you have paint underneath? --Emily

[@boyracer3477]

I like you. I love what you did to your truck. I have an old rusty F-150 that I thought I was going to have to slap a cheap Maaco paint job on. It has lots of surface rust but nothing deep. Your method would be perfect. You sold me! I really like that if I don't like how it turns out, it is easily reversible and I can have it painted. So no down side in trying. Thank you very much.. I just subscribed. Oh .... your old truck deserves to have those rust holes fixed. Don't let it rust into the ground. Just sayin'.

[@UglyTruckExperience]

That's awesome! Thanks so much for subscribing! The guy we got this truck from said it belonged to his uncle, and he was pretty sentimental about it... so I feel like it's right to let their story live on. It took 57 years to look like this, and while it might not win any car shows, I love the way it looks. That being said, there's some structural stuff under the cab that needs to be addressed before it can be a real driver. We have a couple other videos on this truck if you want to check them out! Thanks for watching! 😊 kzbin.info/aero/PL3Xf8yWArPC5ZV9bIJmZ3tZYm6WEBMAec

[@theaussienurseflipper.8113]

Great job, I think if you rubbed it all down with a Scott's pad and put a third or fourth cost on, it would really pop cheers Graham

[@UglyTruckExperience]

Thanks Graham! I think it looks even better after the 2 year recoat. Thanks for tuning in! --Emily

[@stevegreene7596]

Nice! Might try to use what you have left over for the ‘60. Might also paint some flames on it so it’ll run better when we line em up!

[@UglyTruckExperience]

Sounds like someone is jealous! Maybe the same person that honked at me? 🤔😁 But seriously, I was thinking about the 60 while I did this one. It would look sweet! Flames and all!

[@stevegreene7596]

You caught us! We are guilty of honking… Serious question though; being as though my wife and I are proponents in utilizing child labor, would it be ok to turn my girls loose on this? Any harmful chemicals to worry about, etc. I think they would enjoy the process especially knowing the ‘60 will be theirs someday.

[@UglyTruckExperience]

That would be awesome! The SOS pads are kind of rough on your fingers, so I wore gloves. The polish does say "use in well ventilated area" so maybe don't let them eat it... But I think that is a great idea! 👍

[@dirty2307]

I wire brushed the rust . Wiped it down with acetone , lightly to not rub off the paint . I painted on carroseal . The rust turns black . It looks so cool . Then paint over with fllood . Night and day difference.

[@UglyTruckExperience]

Very cool! I've seen that look, but never knew how it was done. If you're on Facebook, send us a pic! Thanks for tuning in! --Emily

[@LFo-z1q]

Truck is lookin cool. I havent seen this method before but def makes more sense to me than the oil method. Im used to doin my floor linoleum with floor wax so i already have a supply here. It probably wont last 6 months but should def last a few. Cool to see a female doin her thing too.👍

[@UglyTruckExperience]

Thanks. We appreciate you watching. This has been on this truck now for over a year and it is still looking great. Let us know how it turns out if you try it. Emily

[@chadhickey9942]

@@UglyTruckExperience is the truck kept covered in a garage or carport or parked outside? i just stumbled upon this and want to do my 68 cougar that stays in the garage 90 percent of the time

[@UglyTruckExperience]

@@chadhickey9942 Hey Chad! This truck has been outside for a year and a half in the rain, snow, sun, heat, etc. And it still looks great. I am just now noticing a little bit of a haze, but I haven't washed it either. Water still beads up, and colors are bright. I'd say yours would last much longer since it's in the garage. If you give it a shot, let us know how it goes! --Emily

[@ramcentralstation]

Definitely curious as to how long it lasts . Subscribed to follow. Looks great by the way, I have a 92 dodge beater D150 I may try this on, paint is shot.

[@UglyTruckExperience]

Thanks for subscribing! This truck has been outside in the sun, rain, and snow for almost 2 years, and still looks great. The colors are still bright and water still beads up, but it did lose a little shine. I wish I had done a couple more coats, and might try to recoat in the future. Just saw your pic on Instagram. Keep us posted if you give it a shot! --Emily

[@pinchebruha405]

Excellent info glad I caught this answer, I have a vintage horse trailer I want to do this with, I’ve been down the rabbit hole! Just curious if I could hand paint a mural first then apply the Zep? Does the zep prevent the rust from spreading though?

[@michaelhovey5762]

Cool truck. Nice job. Happy to see a Missouri girl. Hi from Savannah Mo.

[@UglyTruckExperience]

Hey neighbor! 👋 Thanks for watching!

[@robertthorn8233]

I’m trying this on my 1964 Cadillac Hearse!,,.Great job,.and thanX for sharing.X

[@UglyTruckExperience]

Very cool! I've been super happy with it. Hope yours turns out great too! Thanks for tuning in!

[@robertcampbell5485]

hell yea gonna put this on my ol rusty 57 210, was thinking about the linseed but this looks like a better option

[@UglyTruckExperience]

Awesome! I've been really happy with it! It has lost a little shine after being out in the elements for almost 2 years, but it still looks great. If you give it a shot, let us know how it goes! Thanks for watching! --Emily

[@robertcampbell5485]

I did it this weekend. Looks absolutely amazing. didn't use zep polish but some other high gloss product. degreased and scotch brited everything. put 4 coats on. it looks just like it has a clear coat, couldn't be more impressed. @@UglyTruckExperience

[@MadeUpUserNem]

Id didnt really seen much of a difference with the steel wool but that finish makes everything REALLY POP. Now i wish i had a rust bucket of my own 😭

[@UglyTruckExperience]

I was really surprised at how much brighter the colors were, too. Go find yourself a rust bucket, and let us know how it goes! 😁 Thanks for tuning in! --Emily

[@angeloc3842]

You can buy it a Lowe’s. We used to use it on boats instead of buffing. Worked great lasted all season, took probably 8 costs though

[@UglyTruckExperience]

That's awesome! I only did a couple of coats, but I wish I had done more. Still looks great after almost 2 years, but it's lost a little shine. Did you do anything special before you recoated it? Thanks for watching! --Emily

[@DRUMSRIO]

Looks nice enjoyed your video , hi from New Braunfels Tx

[@UglyTruckExperience]

Thanks so much! Hello from Missouri! 👋 We appreciate you tuning in!

[@josueavilavital6574]

Olé! I love it…😃👍🏼🏁

[@Reynaga2012]

Wow . Nice looking truck . Great work and very informative. I can’t wait to start on my old 74 chevy camper special .

[@UglyTruckExperience]

Thanks! I just said yesterday that I'd like to do this to our 74 C20 yesterday! Be sure to let us know how it goes. --Emily and Jerry

[@-sandman4605]

WOW, Awesome, good job mate 👊🤠 🇦🇺

[@UglyTruckExperience]

Thanks for watching! It's only been a few months, but we were just talking about how good the truck still looks!

[@vzangla]

Saw the elusive elbow corns being spent on some classic steel. Way to go.

[@UglyTruckExperience]

That's corns well spent! 🤣

[@rickyalvarez5903]

Awesome video and Awesome results.

[@UglyTruckExperience]

Thanks Ricky! We appreciate you watching!

[@marcelodesouza438]

Very good, i'm from Vitória. ES Brazil. I have a big 73 and i'll do for to have this performance. Good work girl. Ser you next vídeo.

[@UglyTruckExperience]

Thanks Marcelo! I have been very happy with it! If you do it on your 73, let us know how it goes. Thanks for watching! --Emily

[@josueavilavital6574]

Good Job, Hard Worker! Olé!🏁🏁🏁

[@UglyTruckExperience]

Thanks Josue! We appreciate you watching! 👋

[@se7encureton]

I loooooove that look

[@UglyTruckExperience]

Thanks! I was really happy with how it turned out! We appreciate you watching!

[@TateReggie]

Great job! Thanks for sharing.

[@UglyTruckExperience]

Thank you! We appreciate you watching!

[@michaelm2502]

Great job and I think I’ll do this to my 72 C2500! Btw, if you lay on the cab floor and look under the dash, you’ll know the original color of the truck from the firewall :) Cheers

[@UglyTruckExperience]

That's a good idea! Thanks Michael! If you give it a shot, let us know how it goes! --Emily

[@pinchebruha405]

I’m guessing body parts replaced from accidents over the years is why there’s so many different colors!

[@mowguy1]

Now I'm wishing I kept my 85 dodge ram shortbox. It had lots of patina great idea.

[@UglyTruckExperience]

It was definitely worth the money! Thanks for watching!

[@vinnyresinger4809]

Looks really good. Love it.

[@UglyTruckExperience]

Thanks Vinny! Just fired it up today and it still looks great!

[@andyvitale6071]

God your a machine,you go girl. It looks great.

[@UglyTruckExperience]

Thanks Andy! We appreciate your watching!

[@berg6964]

Great job!

[@UglyTruckExperience]

Thanks Berg! We appreciate you tuning in!

[@davidechols6797]

Looks good thank you for the information

[@UglyTruckExperience]

Thanks David! We appreciate you watching!

[@billycollins4049]

Nice I thing I’m going to do my 87 gmc 4x4 square body ❤

[@UglyTruckExperience]

Awesome, let us know how it goes! Thanks for tuning in! --Emily and Jerry

[@saragiret7127]

After all the comments and ugly truck updates I took the leap to do the Zep polish on my 81 Toyota pickup. Unfortunately, the truck is beige (with patina of course) and the zep went on too yellow for my liking so I bought the stripper and removed it all. 1 hour of application (2 coats) took 5 to remove. Now I’m back to considering paying for a spray on application

[@UglyTruckExperience]

Hey Sara, I'm sorry it didn't work out for you! That's a bummer! That 80's beige on those pickups is pretty cool. Hope you find something that works for you! --Emily

[@kidaddisontx6542]

Thinking about doing the patina look on my 51 Merc. By the way Shes cute!

[@UglyTruckExperience]

Thanks, Kid! If you give it a shot, let us know how it goes! We appreciate you watching! Emily and Jerry

[@belmondouze]

Superbe !! Bravo !!❤

[@UglyTruckExperience]

Thanks! We appreciate you watching!

[@vm722]

SoS awesome idea. Washing the thing is good. Floor wax not so much. Film will yellow in a few months. Good luck with that.

[@UglyTruckExperience]

For $25 it was worth a shot! Time will tell. 😊

[@vm722]

Boiled linseed oil and a little mineral spirits. I would say would be better than wax.

[@UglyTruckExperience]

A lot of people use that method, but I didn't want a high gloss shine or a greasy finish. I found matte and satin kits for patina, but they were spray on and over $100 on the cheap end. I plan to restore this truck at some point, so for the investment, I'm very happy with the results. 👍

[@vm722]

@@UglyTruckExperience Wax isn't necessarily a bad thing. It can be removed if it does become a problem. Leaving them in the damp forest covered in leaves. Or a tarp.Definitely a bad thing.

[@miguelangelcuadras2726]

Great Job…..!

[@UglyTruckExperience]

Thanks! We appreciate you watching!

[@PeterGurba]

O’ ld blue aww sea fome green... spray some oil or linseed on bottom chaseiee, petro vazaline or baby oil on tires and dash... any cool fabric on doors or love of the wood and or bench.. rifle rack,, steeringwheel wrap

[@UglyTruckExperience]

Thanks Peter! I have a ton of plans for this truck, but I will leave the look the same. I've always wanted to do fabric door panels, so maybe I'll try it on this truck. Thanks for watching!

[@Humble_Upholstery]

Good job!

[@UglyTruckExperience]

Thank you!

[@jesselaporte7184]

Good video. 1) how did it feel when touching it? Was it tacky at all or did it completely dry? 2) 2 years later who is holding up?

[@UglyTruckExperience]

Thanks Jesse! Nope, it's not greasy or tacky at all. It's the same stuff they use on commercial floors, so it's a smooth hard finish. Feels just like the floor of a Walmart! 🤣 Two years of sun and rain later, it still looks good. I do wish I had done a couple extra coats on a couple of the rough spots, and will recoat it someday. If you give it a shot, let us know how it goes! Thanks for watching! --Emily and Jerry

[@Jesilutoo]

Am I the 1000 subscriber? Congratulations!

[@UglyTruckExperience]

You are!!! Thank you, thank you!!! 🎉🎉🎉

[@rickjackson3414]

😂 not housebroken !

[@UglyTruckExperience]

🤣😁

[@Silverado5.3]

Very cool

[@UglyTruckExperience]

Thanks for watching!

[@Silverado5.3]

@@UglyTruckExperience you are welcome

[@derekrotruck8737]

How is it holding up? I’m trying to decide which route to go on my 50 Ford F5, have never heard of using this.

[@UglyTruckExperience]

It's been outside in the Missouri sun, snow, and rain for almost a year, and still looks exactly the same. No peeling or yellowing, water still beads up. Definitely worth my $25! I hadn't heard of it either, but I found a MotorTrend article and gave it a shot. There's a link in the description if you want to check it out! Thanks for watching!

[@michaelweller5470]

Second time I’m seeing this floor sealer as a clear coat for cars. The finish looks more natural for an old car compared to the kits that are too shiney. Looks like it dries too fast to have a wipe off stage. About to do this myself

[@UglyTruckExperience]

Hi Michael! I've been really happy with it so far. I also liked that it was more of a satin finish, and I can add layers to add shine. It does dry pretty quick, so I'd recommend doing it in the shade. Here's a 2 year update if you're interested! kzbin.info/www/bejne/eZKkeqZorrGrqpI If you give it a shot, let us know how it goes! --Emily

[@WillyRaschke]

Just got a 77 jeep cj7 and it needs its rust preserved

[@WillyRaschke]

I saw some of the BLO/mineral spirits videos and I like this better, maybe turtle wax it after a few zep applications?

[@UglyTruckExperience]

Awesome! I haven't tried turtle wax on it so I'm not sure how that would work. But Zep makes a whole line of floor cleaning/refinishing products. Mine still looks pretty good after 2+ years, but it did lose a little shine. I'm going to try their floor cleaner and recoat with the same polish and see what happens. Should have a video on that sometime soon! Thanks for tuning in, and let us know how it goes if you try it!

[@Dakota_Speaks]

I wonder what a wet look floor polish would work?

[@UglyTruckExperience]

I thought about that. I went with the high traffic for durability, and I can add more layers to add more shine. But the wet look would be pretty sweet! If you give it a shot, be sure to let us know how it goes! Thanks for watching! --Emily

[@guymiller9212]

I don't know if you had answered in the comments, but how long does it last? I came out pretty cool.

[@UglyTruckExperience]

It's been outside for almost 2 years, and it still looks good. No peeling or yellowing, colors are still bright, but it did lose some of it's shine. I wish I had done a couple more coats, but still super happy with it. I'll have an update/recoat video on it someday. Thanks for tuning in! --Emily

[@scottwithoutadoubt1405]

Might need to do this with my sons ‘55 2 1/2 ton… I have 15 gallons of commercial wax left over from a job! 🤣

[@UglyTruckExperience]

I used less than half of a gallon on the whole truck, so you should have plenty! 😂 I was super happy with the results.

[@boyracer3477]

Let us know what 42 coats of that stuff looks like ....🛻

[@dubbydixon2410]

Badass❤

[@UglyTruckExperience]

Thanks Dubby! We appreciate you tuning in!

[@TravisNewton1979]

Wonder how this would work on a late early 90s Chevy truck. They had clear coat issues where it didn't adhere to the paint. Just thought you might be able to use this method on where the clear has went away

[@UglyTruckExperience]

I'm not a paint and body expert, but I think when that happens, they usually sand it down and respray the clear coat. I'm not sure if the floor polish trick would be good for that. It has a different texture and shine than a normal clear coat, so I'd be worried about blending it into what you have. Keep us posted, I'd be curious to see what you figure out. Thanks for watching! --Emily and Jerry

[@johncoolidge5502]

Hi loved the video I watched it December 22 I was wondering how its holding up

[@UglyTruckExperience]

Thanks! This truck has been outside in the Missouri sun, snow, and rain for almost a year, and it still looks exactly the same! There's no sign of peeling or yellowing whatsoever. We'll have another video on this truck soon and I'll be sure to show how it's holding up. Thanks for watching!

[@williamgarrity9482]

I was thinking again, I wonder if you could apply the wax buy means of a spray bottle and rub with a cloth..God bless yall real good

[@UglyTruckExperience]

Definitely! I laid it on pretty heavy on these first couple coats, but a spray bottle would probably work better for lighter touch-up coats. I'm hoping not to have to touch it up too often. 3 months in and still looks like the day I did it! Thanks for watching!

[@bradwilson4153]

Looks nice! I'm entering my 84 C10 in a car show this weekend. Do you think it would work well with just faded paint?

[@UglyTruckExperience]

Thanks Brad! It would definitely brighten up the colors, but you'd be surprised at how much a good scrub would help. Depending on how much paint you have, I'd be careful not to use something too abrasive. If you give it a shot, let us know how it goes! Thanks for tuning in! --Emily and Jerry

[@dongoff6762]

AWSOME JOB How long did it last? keep it up

[@UglyTruckExperience]

Thanks! We're coming up on 10 months sitting in the Missouri sun, snow, and rain, and it still looks the same! No peeling or yellowing, but you can see the rough surface rust in a couple places where I got lazy with my prep work. Still the best $25 I've spent! Thanks for watching!

[@ronnieg6099]

Has it yellowed over time? Also, try Penetrol next time. I hear its very durable and does not yellow.

[@UglyTruckExperience]

This truck has sat outside in the Missouri sun, rain, snow and heat, and still looks exactly the same. No yellowing or peeling whatsoever! Thanks for watching!

[@kp6536]

Looks awesome! I’m planning on doing the same to my 73’ C20. How long did the finish last?

[@UglyTruckExperience]

Thanks KP! It's been outside in the sun, snow and rain for almost 2 years, and still looks good! It did lose a little shine, but the colors are still bright and water still beads up. I'll give it another coat and have another video on it someday. If you give it a try, let us know how it goes! Thanks for watching! --Emily

[@rbw3059]

Do you have a video of how the truck looks now 1 year later?

[@UglyTruckExperience]

We were just talking about that! We don't, but it needs a ton of work, so we'll get it back in the shop soon. The clear coat still looks great! It's been outside in the Missouri heat, rain, and snow for over a year now, and still looks the same. No peeling, discoloration, or film at all! I've been really happy with it. Thanks for watching!

[@andyboettger91]

Hey juat wondering how long it ended up lasting. Im definitely considered do this to my car now

[@UglyTruckExperience]

Hey Andy! I just posted a 2 year update on it! Here's a link! kzbin.info/www/bejne/eZKkeqZorrGrqpI

[@PeterGurba]

fill holes with lead ..or pl polyuratain caulk

[@alanbellkey4592]

Hey there awesome truck I have a question so the video says it’s about a year old how long did you have your satin shine? And is it undercover does it sit out in the elements I live in Idaho we have hot summers and snowy winters. I’ve tried the Linseed oil trick It doesn’t last very long at all basically a few weeks . I’m thinking about doing this on a 1950 Buick fastback that my grandparents bought new here in town. Thank you, Alan

[@UglyTruckExperience]

We're in Missouri, so similar weather to what you have. This truck has been outside for over a year, and it still looks exactly the same. Dries hard with no greasy finish, but water still beads up. That's awesome that you still have that Buick! Be sure to let us know how it goes if you give it a try. Thanks for watching! Emily and Jerry

[@PeterGurba]

use 4 sided car brush clean or powerwashers

[@BrianNack]

now that its been a year, how long did it last? looks great!

[@UglyTruckExperience]

Thanks Brian! It's been outside for almost 2 years, and it still looks good. No peeling or yellowing, colors are still bright, but it did lose some of it's shine. I wish I had done a couple more coats, but still super happy with it. I'll have an update/recoat video on it someday. Thanks for tuning in! --Emily

[@joebiker5992]

Great job! How has it been holding up thus far?

[@UglyTruckExperience]

Thanks Joe! Here's a link to the 2 year update! kzbin.info/www/bejne/eZKkeqZorrGrqpI

[@joebiker5992]

@@UglyTruckExperience I noticed that right after I sent the message. I think I'm gonna go this route with my 54 chev. Love the look!!!

[@UglyTruckExperience]

Be sure to let us know how it goes! I've been really happy with it!

[@joebiker5992]

@UglyTruckExperience I certainly will! Love your truck BTW!

[@stevenbalsamo5162]

So how long did it last? I've been going at my square body Dodge with the sos pads, this is the next step.

[@UglyTruckExperience]

It's been over 2 years outside in the sun, rain, and snow, and it still looks good! Colors are still bright and water still beads up, but it did lose some of its shine. Zep makes a floor cleaner also, so I plan to wash it and recoat one of these days. But still super happy with it for $25! If you give it a shot, let us know how it goes! --Emily

[@throttlewatch4614]

Are y’all going to the #nonamenationals ?

[@UglyTruckExperience]

We might come check it out, but we definitely don't have anything race ready!

[@_KayGee_]

How's it holding up? Have you had any issues with yellowing from UV?

[@UglyTruckExperience]

Hi Kaitlyn! Nope, no yellowing or peeling whatsoever. It's been in the sun, rain, and snow for 2 years, and colors are still bright and water still beads up. It did lose a little shine, so I'll recoat it someday. Not bad for $25! Thanks for watching! --Emily