Repairing Failing/Peeling Clear Coat with Poppy's Patina Wipe-On Clear Coat

Located in Tulsa OK, Poppy's Patina is widely know as the Original Wipe-On Clear Coat for classic cars and trucks. Restore paint or preserve patina. Poppy's Patina is not just a "sauce" that wipes off. It seals your patina in a UV protected coat that will last for years. Find products to preserve your patina/paint in Matte, Gloss & Satin today! Repair Failing/Peeling Clear Coat
Instructions: Wet sand the rough edges of the old clear coat with 800 grit sand paper, scuff remainder of the area you are applying to with grey scuff pad. Wipe on clear coat fast in an even direction. Do not go back over areas after 30 seconds of applying to avoid imperfections. If some areas need to be touched up, wait 24 hours for full cure. Scuff with grey scuff pad and reapply to area.
Items Needed:
“The Whole Shebang” Gloss Kit - poppyspatina.com/collections/...
800 Grit Sandpaper
Questions about our product?
Visit: poppyspatina.com/pages/faq
Instagram - @poppyspatina / poppyspatina
Facebook- Poppys Patina
Video by ‪@papasolecustoms‬

[@SimpsonsClassics]

This stuff looks great. We definitely have some cars that could benefit from this product.

[@bbsal4031]

Later as you normally would wash it can you use the normal products like ceramic shine, wash and wax, spray detailer, stuff like that?

[@jermaineenglish5732]

Can you use a different reducer with the hot rod block paint

[@MuscleCarJr]

what did I do wrong It came out flat & I ordered gloss

[@luisponce1472]

Don't do this in the Sun do it inside your Garage

[@Fdeubcfhbbjhfd]

How long does it last?

[@poppyspatina]

This is an actual two-part urethane clearcoat. One coat will last years!

[@TSchra37]

@@poppyspatina There shouldn't be any problems using it on an RV?

[@tommysanfilippo3165]

Not at all.

[@edwardvazquez2637]

Should've sand ed first

[@gianni7397]

💖 *Promo sm*

[@deannapoli441]

Will this work if there is no clear left? All thats left is base...

[@SadComicLaughs]

considering this is a wipe on clear coat its probably better if you don't have a current clear coat cause this will make one and then it will be all uniform as long as the base coat is fully intact and not faded and spoted but i'd think you get some touch up spread it around and than put this stuff on and your good as new or at least shinier for 2 or more years

[@Mike-01234]

Probably better then leaving it base won't last long then you start getting rust I would give it a shot see how it comes out. Worst case you DA sand it again and shoot entire car base and clear. I have repainted several cars not as difficult as many think it is just paint. People are intimidated by urethane more then needs to be. I DA sand entire car then use same method in the video Stochbright pad and W&G remover. I use one of those $100 Harbor Freight carports add plastic to the sides use two cheap box fans from Walmart throw some AC filters on the backsides of them blows clean air in. Not perfect good enough for a budget paintjob.

[@luisponce1472]

I Recommend wet Sanding it just to get the Lumpy stuff off