270% Brighter LED Bulb | 14-19 4Runner S-V.4 Install

[@FedericoPGiller]

I wish more how to video experts could follow your efficiency, In less than 3 minutes you taught me how to do the entire process, It took me only 25. Thanks. 5 Starts

[@HeadlightRevolution]

That is so good to hear that we could help you out with this! Thank you for the kind words, let us know if we can help you further!

[@rostamr4096]

How about the fog lights? Great review though

[@LionRunner]

9005 SV4 High beams are great on 4Runners but the DRLs are way too bright and I got people flash at me when using as DRLs. Wish Headlight Revolution can find a solution to run them at lower power to use as DRLs like some competitors.

[@HeadlightRevolution]

The only bulb that we have found that will dim as a DRL is the Xenon Depot Xtreme Pro bulb with the DRL module, which we have on our website! headlightrevolution.com/2014-2018-toyota-4runner-high-beam-xenon-depot-xtreme-led-pro/ Reach out to our customer service team, and we can get the exchange process started if you'd like! [e-mail]

[@LionRunner]

@@HeadlightRevolution Yes, I got that from you. Since I have both I was able to compare SV4 vs Xenon Depot.

[@TopiasSalakka]

I bought LEDs from a local spare parts shop yesterday and they didn't fit... The socket is so recessed that i can't tighten the screws on the base without drilling holes to the housing, and the wiring needs an adapter. I just returned them, probably getting a HID kit.

[@HeadlightRevolution]

Feel free to reach out to us if you have any questions on your specific vehicle, We will only send you bulbs that fit your vehicle without drilling the headlight! [e-mail]

[@douglasclark7114]

How does the high beam kit affect the DRL operation?

[@klutch14u]

Are the "drivers" included with the bulbs? Assume this also applies to 2020 4Runners as well? Site only goes to 19

[@HeadlightRevolution]

Yes, the drivers are included, and this does also apply to the 20s as well!

[@ry30]

Is this the brightest low beam led bulb for the 4Runner as of now?

[@JBob804]

Is there room to put the PWM module in the headlight and then reinstall the dust cover for the high beams (9005)? Or will I need to modify the dust cover accordingly?

[@HeadlightRevolution]

Hey Jason, On this model year of 4Runner there isn't a dust cover for the high beam, So you can just ziptie the wiring and PWM module up out of the way when you're done! -Chris W

[@JBob804]

@@HeadlightRevolution awesome thank you.

[@dbarton8651]

Love the Supernova V4's. unfortunately mine burnt out after only 2 years!!!

[@HeadlightRevolution]

We can get those replaced for you if they are still under warranty, shoot us an email and we will get you taken care of! [e-mail]

[@markbradl8651]

I am going on 4 years on mine

[@dbarton8651]

@@markbradl8651 glad ţo hear that. I wound up going Gtr ultra 2's this time.

[@Baxgs1221]

I’m not getting the output I’m seeing In the photos and videos on KZbin of these headlights. I’ve installed the way it says but I’m not seeing much of a difference what am I doing wrong? Thanks

[@HeadlightRevolution]

Make sure they are installed correctly and that everything is plugged in nicely. Shoot us an email if you're still having issues. 218-755-5200 [e-mail]

[@dan4444]

Guys... I tried ordering these headlights on your website and was unable to because of the checkout process, I tried with apply pay and then with a credit card... no luck, wasn’t successful

[@HeadlightRevolution]

Sorry for the slow response, if you still need help shoot us an email at [e-mail]

[@julianop.4241]

Wouldn't be brighter with proper hids on this projector housing?

[@HeadlightRevolution]

HID's are a bit brighter than LED in this particular housing, However you do need to drill into the dust cover and pass the wiring through to make it all work. Some people don't like the extra work and cost associated with a proper HID setup on the 4Runner. The S-V.4 bulb performs very well compared to stock without any housing modifications! -Chris W

[@TB_SnEaKy]

Should the notch opening that the leds rest in face up or down when the led strips themselves are 3 and 9 o clock

[@HeadlightRevolution]

Left to right!

[@kennethlow6619]

LED’s even the $30 EBAY ones can be 200% brighter than stock halogens but you get 0 throw ahead. Your foreground is bright as well but further down the road will be pitch black. Common problem for ignorant users changing their halogen to LED’s in their stock halogen projector housing

[@HeadlightRevolution]

You're definitely right about that, It's a big reason why we do so much testing on all these headlight housings. We've even seen some $100+ headlights not throw light nearly well enough depending on the headlight housing. If you've got a 4Runner you should definitely check these bulbs out though, They are a major improvement. -Chris W

[@Ofrd_adv]

If you don’t use the drl the flickering won’t be an issue, correct?

[@mikegags9115]

I called today to order the GTR Ultra 2’s for my 2020 Toyota 4Runner Off Road Premium. I was told that they would not work. I am interested in LED lights, what are my options for the low & high beams and the fog lights? I want to keep this simple and I do not want to grind anything or start drilling holes to accomplish this.

[@mikegags9115]

Will the SV-4’s work

[@HeadlightRevolution]

The SV4 bulbs work great and everything you see in this video would apply to your 2020 4Runner without any surprises or challenges.

[@stevederosa1655]

it says on the website that the high beams dont dim when using as the drl function? so youre telling me the leds will be on full blast as drl during the day? who wants that? wth.

[@HeadlightRevolution]

That's correct. The justification is that the S-V.4 bulb is the brightest high beam available for this truck right now, so when you need it the most at night you've got it! Yes the DRL is brighter than normal, but it's a price some people are willing to pay.

[@MrRivermeat]

Is there a way to rotate the collar on these?

[@HeadlightRevolution]

Yes there is a set screw on the side of the collar that needs to be loosened to rotate the collar. Adjust the collar so once the bulbs are locked into place the LED chips face the 3 & 9 o'clock position. Adjusting will definitely help your output. new messages

[@Jsfrog]

@@HeadlightRevolution Then the installation part of this video should definitely have covered that aspect!!

[@nickprojo1679]

Are the low beams and fog lights the same bulb ?

[@michaellane2246]

I bought and installed some high beam Fahren bulbs on my 2015 Toyota 4Runner Limited. They flicker but not bad. Any suggestions on what I can buy to stop it?

[@HeadlightRevolution]

It sounds like you need a PWM. www.headlightrevolution.com/gtr-lighting-pwm-hid-kit-modules-ACC.PWM5202.MOD_2?quantity=1

[@ricardodesouza7229]

This is a 14 4runner, mine is a 2013. Where can I get these bulbs for it?

[@mikegoolsby2731]

Do these fit on a 2020? The link in the description doesn’t have 2020 as an option...

[@HeadlightRevolution]

Yes they do! We’ll get that fixed.

[@perceiving6066]

Do you have to make a hole in the dust cap for high beams?

[@HeadlightRevolution]

You shouldnt have to make any hole in the dust covers, if you are having trouble with the install you can shoot us an email! [e-mail]

[@jamesmcgarvey2144]

Just curious as to why your website shows the output of 1060 lux when installed in the 4 Runner but here you say it's only 630 lux? Seems like a pretty large variance for the same bulb in the same vehicle. Is it based on the environment you conducted the tests in?

[@HeadlightRevolution]

Yes, lux readings will always be different because of test conditions.

[@neobx2]

Awesome I been looking for DLR/high beam led lights that don’t flicker or have a solution. Gonna give them a shot ✌️

[@HeadlightRevolution]

Let us know how it goes!

[@stevenyounger]

Just got a 2019 4R Nightshade. I'll commute in this car as well as use it off-road. Will I have problems with street legality/brightness with these extremely bright Low-Beams?

[@HeadlightRevolution]

As long as the vehicle is used on road, upgrading to LED or HID will not be DOT compliant if you are within the US. If you're wanting to go with a DOT compliant option, going with a brighter halogen bulb will really be your only option. The Vision X bulbs are a really great option if you're looking to go that route. Low beam: headlightrevolution.com/vision-x-h11-80-watt-headlight-bulb-set/ High beam: headlightrevolution.com/vision-x-9005-100-watt-headlight-bulb-set/

[@flyinby82]

How are these LED bulbs in the rain? I have the Morimoto 2Stroke 2.0 and the light output is very low, next to none in the rain.

[@HeadlightRevolution]

That's strange. All lights are less effective in the rain, but LEDs arent less-so.

[@rickyguti]

How much brighter are these compared to Diode Dynamics SL1? Is it worth doing the upgrade?

[@HeadlightRevolution]

The S V.4 is a little bit brighter than the SL1 in this application, However we sure do love the Made in America Diode Dynamics products! -Chris W

[@theeballer6429]

Has anyone had any problems with dust entering inside the headlight low beam housing? ...How does this compare to the updated Morimoto 2Stroke 3.0 for a halogen projector H11 bulb?

[@HeadlightRevolution]

The only times you would have problems with that are if you have a bulb that is not making a proper seal. You will not have any issues with the 2Stroke 3.0, infact you will have to use that stock bulb grommet because the ones that come with the 2Stroke 3.0 are too large for that vehicle! Let us know if you have any other questions, we are here to help!

[@Popcornbeetle]

Any issues with DRLs if I only do the led lows? Nice video!

[@HeadlightRevolution]

No issues!

[@teddynaicker2997]

Are these bulbs pre adjusted for the 4runner or do I have to make a adjustments to 3-9 o'clock position?

[@HeadlightRevolution]

The bulbs we installed for this test were not adjusted before install, so you can expect the same results as we show here.

[@stuartcourteney968]

Do these S-V.4 bulbs come in H4 hi and low beam.?

[@HeadlightRevolution]

Yes they do, Here is a link: headlightrevolution.com/v-4-led-headlights-h4-9003-bulbs/ Let me know if you need any help with anything else! -Chris W

[@Mat0]

Will this color LED match up with the Morimoto fogs you are selling?

[@HeadlightRevolution]

Not exactly but close!

[@Macarooz]

I do not want to assume, but do these S V4 lights work on the 2020 4Runner?

[@HeadlightRevolution]

They work great, Especially in the low beam. Everything remains the same as far as the install goes.

[@hiplain1]

If u do low beam do u have to do highs? 2020 pro 4runner...

[@HeadlightRevolution]

You do not have to upgrade the high beams if you upgrade the low beams. It is recommended to do both though, as you're low beams will be brighter than your high beams!

[@james8899able]

You guys have something comparable or compatible to a 2019 Toyota Sienna?

[@HeadlightRevolution]

You'll choose the H11 (low beam) and 9005 (high beam) when you look at our S-V4 bulbs. headlightrevolution.com/led-headlight-bulbs/v-4-led-headlight-bulbs/

[@Ed-bb6kc]

Are these street legal?

[@HeadlightRevolution]

These are not legal for street use, this video was just posted before the regulations changed recently! Sorry about that!

[@wilsonsalcedo7552]

Where can I buy this set of Led' s for my 4Runner. Including the adapter for the day light

[@HeadlightRevolution]

check out our website! We got you covered.

[@TonyBEEA]

How I can order the same one do you deliver to Vancouver please?

[@HeadlightRevolution]

Not sure what specific product you are referring too, but I have linked all of the products for that vehicle below, and you can order any of those products right from our website to Canada! Link: headlightrevolution.com/vehicles/toyota/toyota-4runner/toyota-4runner-2014-2019/

[@paulaposacas5172]

Do you prefer the SV.4 over your GTR bulbs?

[@HeadlightRevolution]

Depends what you'll be doing with them, but in they have a lot of advantages.

[@paulaposacas5172]

@@HeadlightRevolution just normal street driving

[@dbarton8651]

Love my S V.4'S!!!💪

[@HeadlightRevolution]

Awesome, We love to hear that!

[@dbarton8651]

@@rolly1097 purchased them October 2018 and not a single issue that ive noticed👍

[@dbarton8651]

@@rolly1097 absolutely and congratulations!! Since your fog lights are reflectors, LEDs will "somewhat" blind oncoming traffic. you could get some low output ones, which if you call headlight Revolution they will definitely point you in the right direction! they're like 50 bucks.... or you can replace the entire housing with LED projectors, from these guys👇 www.runnin4tacos.com/products/led-fog-lights-2014-2019-toyota-4runner

[@81recinos]

What about the fog lights?

[@HeadlightRevolution]

The Morimoto XB LED Fog lights do extremely well in these 4Runners. If you don't want to do a full housing swap, You could do the same LED bulb in your fog light as you do in your low beam, They both take H11.

[@81recinos]

I'm calling today to place the order thanks

[@AnthonyFarrer_TPG]

Would this fit a 2020 4Runner limited?

[@HeadlightRevolution]

Sure will!

[@landrykilpatrick949]

i like the drl but i think i will go with these over morimotos

[@HeadlightRevolution]

Excellent choice!

[@stephenbrucker4144]

Will these headlights work on a 2020?

[@HeadlightRevolution]

They sure will!

[@JAKEaudio2]

plug the hole in the dust cover, still gonna end up with dust and moisture.......

[@HeadlightRevolution]

We definitely did! This 4Runner is actually getting one of the first sets of the Morimoto XB LED Headlight Housings, We'll have a video soon! -Chris W

[@JAKEaudio2]

@@HeadlightRevolution Chris have you guys heard anything from Morimoto about any potential for Mercedes housings??? I had spoken with them about 10mo ago and they said that they were considering doing W204 and W205 and had even already cadded the assemblies into their prototyping files and also had access to the successfully sequenced front SAMs that control their operation .....then all got quiet

[@HeadlightRevolution]

@@JAKEaudio2 Sorry, I haven't heard anything on Mercedes housings. They are usually pretty good about keeping us in the loop on new housings, But it might be worth reaching out to them again just in case! -Chris W

[@anthonyszeto5508]

compare to Auxbeam T1 series. Which is better? S V.4 or T1 series?

[@HeadlightRevolution]

We will try to test that bulb in the near future.

[@conecrazy]

are these DOT legal?

[@HeadlightRevolution]

They are not. There is not a single aftermarket LED or HID bulb that is DOT approved.

[@conecrazy]

@@HeadlightRevolution too late I already ordered.

[@jj_cruz]

I'm starting to get tired of the GTR lighting HID kit I ordered for my '18 dodge charger, would you recommend these LED bulbs instead?

[@HeadlightRevolution]

HIDs tend to be brighter but we do love the S-V.4s!

[@nicksbfc69]

So.....$450ish for low beam & high beam set! Guess they're pretty proud of those bulbs! I just bought a pair of 4 sided LEDs for my low beams for $15 on evilbay for my 2020 TRD offroad 4runner, I'll give those a shot first I think!

[@HeadlightRevolution]

Let us know when you want a set! 4-sided bulbs are notoriously bad, we have a whole video on it!

[@Venim85]

Headlight Revolution needs to do a collab with Scotty Kilmer on KZbin or something...

[@HeadlightRevolution]

I'd love to go hangout in his shop! -Chris W

[@humblerc841]

Is the drl full intensity, or does it dim?

[@HeadlightRevolution]

If you use the Xenon Depot Xtreme LED Pro with the DRL drivers they will dim, any other option will run at full intensity.

[@michaelc.6306]

I like those Low beams. My 2012.... the low beams have always been weak....but The High beams are Good. I had a G37x sedan with the factory Xenon lights & those were my favorite. My 2012 does have the H11 bulbs for low & Fog....but the Amber DRLs. These look like nice Low Beam replacements. I might try yellow bulbs for the Fog lamps.

[@douglasclark7114]

Is the fan noisy? I’ve heard different people say the LED fan are loud enough to hear them. Is that the case with these.