One correction to the cons. It CAN be used over non-2k basecoats. I've used it over multiple Dupli-Color perfect match spray paint and it works perfectly.
@ranranpoopants Жыл бұрын
False. Just because you can doesn’t mean you should. That’s gonna looks like shit after a week
@Pendragon501 Жыл бұрын
@@ranranpoopants Well... it's been 10 years and still looks great.
@ranranpoopants Жыл бұрын
@@Pendragon501no it doesn’t.
@Pendragon501 Жыл бұрын
@@ranranpoopants Well... you must have f*cked something up.
@landondavid57738 ай бұрын
@@ranranpoopants I've done the same, all kinds of paints. Never had a problem. You sir are an ass.
@maximiliankieselbach44615 жыл бұрын
Why do i feel like this guy should be called "Mighty Spray Mods".
@kranyat20242 жыл бұрын
Deffo
@kevinstafford94665 жыл бұрын
Just painted a motorcycle gas tank using ColorRite 1K color match spray paint and covered it with 2K gloss. I was able to get 3 coats of clear out of 1 can. Amazing results from a spray can.
@destructo25055 ай бұрын
How did it hold up to gas?
@eltorolocowey6 жыл бұрын
It doesn't last 2-3 weeks it last 2-3 days after you activate. After the 3 days the can will go bad and start spraying hard and weird and don't recommend using it.
@elantra456 жыл бұрын
Luis Heredia yup on the can it says only good for 48hrs after activation.
@Brock_Landers6 жыл бұрын
J B That it does...right on the can. Good for 48 hrs after mixing.
@KarlScaleModeling9 жыл бұрын
Thanks for this video. I never knew 2K existed in cans and it's very interesting to know it does! I use 2K through the airbrush and really love it's final shine and hardness. For bigger projects, I'll definitely search for one of those cans! Thanks again.
@ranranpoopants Жыл бұрын
They got 3k in cans now.
@danieltenorio3559 Жыл бұрын
Do we need to sand or prep the surface to use this clear coat ?
@valenciaj4 жыл бұрын
If I apply this to my car job? Will it last? And for how long?
@johndenver50293 жыл бұрын
It will last 146 days
@Onmybutt0779 жыл бұрын
perfect for a non painter to fix a panel and have it look as good as factory paint. im impressed but it is a little pricey for one can ! but way cheaper then setting up a paint shop lol !! thanks for posting the vids !
@Felyxorez9 жыл бұрын
The issue with these for consumers is the very long drying time. If you can't paint in a closed room without dust, it's almost impossible to keep a good finish until the paint is dry.
@MrTruth1118 жыл бұрын
I can see two spots on the left side of the panel, what are those?
@paintbydenn8 жыл бұрын
I think those two spots are dust in the clear.
@zzz7zzz96 жыл бұрын
those are two spots, duh.
@ultrakool6 жыл бұрын
forgot to tack cloth it b4 spraying
@EVAN-re2yo6 жыл бұрын
nobody will go and check if there have any spot on your car..or maybe you have do it before on someone's car?
@rochewijnaar53747 жыл бұрын
I used to use something like this and if done well it really pays off , very great innovation
@XxAviciiLevels5 жыл бұрын
Hey man love your vids! Do I have to wait x amount of time to put 2k clear over my duplicolor(lacquer) base coat?
@okcerx6 ай бұрын
30 minutes
@yamiride79608 жыл бұрын
That was a nice base color to come from a can. What brand base was that ? Or was it something that you had custom mixed ?
@chrisflux573 жыл бұрын
You mention the 2K can only be used over 2K Basecoat or existing 2K finish. Pretty sure it can go over water based basecoat! If you think it can’t. Would you be able to explain? Much appreciated 👍🏻
@RepairRefinishTV7 жыл бұрын
best can clears I've used are these cans!
@faheemahmad94403 жыл бұрын
Where can i bay this clear coat paint
@IngeniousReaper3 жыл бұрын
@@faheemahmad9440 amazon
@faheemahmad94403 жыл бұрын
Thank you
@Instasmile_Bad_Practice6 жыл бұрын
Guy has a spray booth, and gets Huuuuuuuuuge contamination particles in his finish, on ONE PANEL. Imagine a whole car!!!
@tallyslapper99465 жыл бұрын
Larry Dawson fisheyesssss
@MichaelSmith-pm7ci5 жыл бұрын
Test panel, not ment for 100% perfection lol
@nastysoda92124 ай бұрын
pretty sure it was drops off the spray can, the spray is wide and builds on on the can then forms large drops, happened to me, or was coming off his finger.
@waldonutz7 жыл бұрын
Do you only need to wait 10 mins after base coats before adding the clear coat?
@sxtn1025 жыл бұрын
Clear coat is the same as base coat but without pigment...so you treat it like another coat of paint.
@DylanGSXR4 жыл бұрын
Can I clear coat ( 2k same as yours ) over fresh clear coat I did yesterday , I want to put decals on and was told to clear over them . Thanks pal . great stuff 👍
@Hanako33yyy4 жыл бұрын
hi there. I'm endlessly confused about rules of 1k and 2k (namely that can't paint 2k over 1k... although some say let cure fully then fine sand, dust and then cover - another whole subject perhaps...) so my question here is: what is the 'base coat' that you use in this video before the 2k clear? it seems like a regular can, unlike the 2k you demonstrate. so how is it not a 1K followed by a 2k? an extension of that question might be: is are base coats neither 1k nor 2k? for context I'm asking because I have purchased a bunch of DNA aerosols to paint a motorbike tank (basecote, metal flake, candy, colourshift, and 1k clear and was hoping to experiment with them by layering and masking etc. I presume they are all 1k so clear can be applied between flake and candy and again over the top to create smoothness and more room to move incase needing to sand between coats and so forth. now I'm wondering if the base coat black is then infact not compatible for using between flake or candy coats to create black fading to an edge look. I have tried calling DNA a few times to clarify this and if their 1k is an acrylic and they didn't know what I meant by that, and that their aerosols were based on a 2 part system (evidently not true!)...so either I'm more eligible to answer their phones than their showroom staff or I'm losing my mind here. maybe there is something really basic I've missed here. any light on this matter would be so appreciated! thanks heaps for your videos
@dilly24082 жыл бұрын
Yes, there is 2K base coats/primer cans. It is a must to spray primer/base coat first before final paint. And before primer, use sand-paper 1000 or higher with water for a perfectly smooth and glossy base surface. After the sanding, wash with clean water, dry and clean the surface with nitro-thinner and 100% cotton fiber - you can use an old cotton T-shirt as fiber. After spraying the primer, if you are not in a hurry, leave it to dry for at least 12 hours, after that sand it superficial again with 1000, clean the surface with clean cotton fiber slightly damped with nitro-thinner and now you have a perfect surface to paint :) Caution ! Don't use regular thinner because it contain fats and this regular thinner is for oil base paints ! If you'll use regular thinner to clean the surface, the primer and the paint will have no grip and will peel off very easy ! Don't forget this or you'll compromise the whole work ! Now back to the paint job : 2K works far better than 1K. Even on plastic, ABS, acryl or fiber parts like bumpers. Tested myself and so far no issues until now. The condition is to use also 2K paint. Good luck buddy :)
@charliewolf75006 жыл бұрын
Looks like there are two large inclusion, centre top of wheel arch and top rear of the guard. Are the inclusions from the can or something else? I for some reason, always have tiny insects attracted to the drying paint. I need to go all Starship Troopers on the bugs.
@clarewallis92967 жыл бұрын
Can you pant this over enamel like duplicolor metal cast"
@RampartPh4 жыл бұрын
good question but still unanswered though
@pollywogg813 жыл бұрын
I used dupli color match paint and tried using this and it lifted everything.
@Mikefngarage7 жыл бұрын
I think I would risk using a preval spray with some production 2k clear in the can. I tried this and after buff it looked better and I still have a whole gallon of clear. Preval spray can 5 bucks USD and gallon of decent production clear 65. They just dont have that nifty fan on the can like that one. But after buffing it is just fine.
@DrErickLopez4 жыл бұрын
Can you use regular rustoleum clear underneath the spray Max? I have metal flake that I would like to burry underneath regular clear and then apply the spray Max as the last couple of coats
@kikii18 жыл бұрын
Aren't you supposed to wear an air fed mask when using 2k?
@cameronpaterson3395 жыл бұрын
Nope
@jkgkjgkijk4 жыл бұрын
@@cameronpaterson339 yes, you are! You are supposed to wear a full face mask that provides fresh air. A tyvek suit and gloves. Look it up!!! Stuff is no joke. There is no going back after inhaling it.
@FFEnterprises9 жыл бұрын
It says it should only go over a 2K base, I can't find anything that says that for color matched paints. What is the worst that happens if it goes over a 1K base? Bad adhesion? Thanks.
@gabster1189 жыл бұрын
F&F 2k clear wont work on 1k base, it will react and eat into/ bubble the 1k base. If that does not happen eventually it will de-laminate and crack.
@VoodooDewey694 жыл бұрын
F&F It shouldn't matter as long as the base coat has flashed off or cured.
@travisshrey67205 жыл бұрын
Your notes say it has to be used over a 2 part base. That is not correct, I've done six motorcycles and many car parts using it over aerosol color-matched base spray paints.
@customspraymods5 жыл бұрын
Travis Shrey ahh when I say 2k basecoat I just mean 2k suitable basecoat. I did spray the base with an aerosol in this video.
@faheemahmad94403 жыл бұрын
Where can i bay this clear coat????
@Bad_Phil3 жыл бұрын
I have a SprayMax 2k question for you. I sprayed it on, and it did a great job... but for whatever reason, I then decided to scour the end finish with 3000 grit before buffing it out with polish. This left it with a sort of satin finish when I wanted high gloss to help enhance the colour pop! Is it possible to lay another coat or 2 of SprayMax 2k, or will the polish I used repel the clear coat? If that is the case, is there a way to prep it without ruining the paint below?
@simonholmqvist80173 жыл бұрын
If you didn't actually sand through the clearcoat you should be able to sand it with some 5000 grit wetsanding paper and then polish it again with a heavy cut compound, preferably with a machine polisher, and it should become shiny. The satin finish is just a lot of micro scratches that can be taken out with finer sanding and compounding.
@Bad_Phil3 жыл бұрын
@@simonholmqvist8017 awesome, thanks Simon!
@wexlop74508 жыл бұрын
The 2K spraymax Spray can I got gave moderate orange peel & after 2full days without baking hasn't gone hard. My guess an unreliable inside design with the hardener.
@keithroberts561111 ай бұрын
I hope all those die hard's out there in wally world!! Are paying attention to this stream and witness the real purpose of this product!!! And stop applying this clearcoat on your headlights!!!But no doubt you'll all just carry on!!!🤪🤫🤣🙄💯
@Fabs34 ай бұрын
Whats kind of respirator should be used with this type of clear coat ?
@HatedWar7 жыл бұрын
i think this video edited with special effect it looks easy on him but actually when you do it yourself aint easy as watching this video lol
@mickcoomer97146 жыл бұрын
HatedWar. That probably comes from experience.
@mickcoomer97146 жыл бұрын
Yes. It’s a thing called experience. Makes most jobs look easy. If it was easy anybody could do it.
@MegaChuck516 жыл бұрын
It definitely comes with the experience. I painted my M/C gas tank with the automotive touch up paint from spray cans then covered with POLY clear. The problem with spray cans there is very little paint and alot of thinner to make it spray. The paint looks great but you still have to worry about gasoline.
@JoeAndMattsDetailing0 Жыл бұрын
Yes, I love that stuff. I put that on my Simers five years ago, still holding strong.👍🏼👍🏼👍🏼👍🏼🎩
@boujeePerformance9 жыл бұрын
2k is lot of money for one spray can!!
@papitosabe9 жыл бұрын
Jayden Isem nice dad joke
@kringle026 жыл бұрын
It's worth every penny.
@MADMAN17476 жыл бұрын
If you don't want the clear coat to turn yellow in the sun you have to pay for the good stuff, the cheap shit is a waste of money
@392lux5 жыл бұрын
It’s just 20 bucks lol
@gsheverything_27165 жыл бұрын
19.99 is well worth it
@goldfish02rex4 жыл бұрын
Best video I’ve seen for this product. Well done ,sir.
@CORLEONESPORTS977 жыл бұрын
for some reason my clear always comes out with heavy orange peel, i just cant figure it out,
@VoodooDewey694 жыл бұрын
pmo civilian police Urethanes are thick in nature unless you have a really good spray gun that can atomize the clear coat then you get orange peel but all clear coat in all spray guns still give you the effect of orange peel and you cannot adjust the orange peel on a spray can, it's impossible, a spray can is what you see is what you get there is no feed control on a spray can.
@MrStratbatАй бұрын
Kill the music so it does'nt kill your next video...
@Wavelover332 жыл бұрын
That mask does nothing to stop 2k from entering your body. Plus it goes through any exposed skin/eyes and it’s extremely toxic. Do yourself a favour and educate yourself before you “teach” others. It’s serious stuff and people’s health is a priority
@hugo16556 ай бұрын
What’s the ideal humidity to spray if don’t have a booth. I’m attempting to paint a tailgate
@jaheengerauto9 жыл бұрын
Hi where u been no video for long time by the way that is a great product for small jobs
@Sniper_Cat_714 жыл бұрын
Liked the video, stayed for the 1991 porn music!
@davidgoodwin165 ай бұрын
The orange peel is from spraying too thick a coat. Do more thinner coats can help.
@sasquatch11593 жыл бұрын
will this be ok to use on touch up paint from a can?
@jeremycarmack43343 жыл бұрын
Awesome, going to try this on my pinball playfield I just restored
@jeansandmyshirt3 жыл бұрын
The shop told me when you open and mix it you have to use the whole can or it will go solid. You cannot resuse it after a few days
@joelehane8133 жыл бұрын
48 hours is max recommended
@presidentdwaynecamacho37978 жыл бұрын
hi mate, do you know where I could get that spray max clear in Sydney? I`m going to re-clear the fuel tank on my bike as I`m getting new decals on it.. would it be ok just to sand of the old clear coat and apply new one??
@customspraymods8 жыл бұрын
VG Auto Paints. my sponsor
@Bylga9 жыл бұрын
2K spray can is awesome!
@winnipegperfectcircleflyin7859 Жыл бұрын
who sells 2k acrylic urethane in quarts?
@xinecallaw27289 жыл бұрын
Thank you for making & uploading this video because this product is amazing.
@garu81939 жыл бұрын
can you use this over laquer ?
@VoodooDewey694 жыл бұрын
garu8193 Yes you can spray urethane over cured lacquer which you cannot spray lacquer over urethane.
@jds_ninetwelve8 жыл бұрын
subscribed! super helpful, you need more exposure mate! good stuff
@TheBennynyc26 жыл бұрын
Do you have any experience with using 2k clear on polished aluminum rims ? Thanks for all the great content 👍
@georgeali19534 жыл бұрын
It won't look well. Take off the polish then paint over it.
@wade69722 жыл бұрын
I just did my aluminum rims came out fantastic just prime, sand, base coat and last but not least 2k clear glamour best clear coat hardener I’ve ever used.
@TheBennynyc22 жыл бұрын
@@wade6972 non-painted just polished aluminum. Will the 2k stick to the aluminum?
@Emiroj5 жыл бұрын
How can that be a 2k base coat when there is no hardener in the can while he was spraying the base coat? I just got a spraymax 1k base for my car (same colorcode as my car) and along with a spraymax 2k clearcoat and it worked perfectly to clear the 1k base with the 2k clear. I'm new to this but can somebody explain why he needs to have 2k base coat?
@tommikurronen43845 жыл бұрын
Emiroj sometimes 1k base coats start bubbling with 2k because 2k has stronger hardeners
@Emiroj5 жыл бұрын
@@tommikurronen4384 yes but it seems like he used 1k base? Or am I wrong? I am new to this but was not sure, hence the question :)
@TheMonear4 жыл бұрын
@@Emiroj The basecoat does not have hardner, so, technically it's 1k basecoat... but if it is sutible to cover it with 2k clear then you can name it as 2k basecoat
@Emiroj4 жыл бұрын
@@TheMonear thank you! That explains it
@EUROASIAN109 жыл бұрын
Bloody Champion. Thanks for the video. Saves me stuffing around with my noisy compressor and cleaning out the spray gun.
@GoProGoalieUzi6 жыл бұрын
I used it on my goalie mask!!!! Too bad the actual spraying did not upload, but the end result did!!! SPRAY MAX ROCKS, NO ISSUES AGAINST PUCKS HITTING IT!!!! Chk out my video!!
@allanpountney47655 жыл бұрын
Hi. Can I use 2k over the top of acrylic base colour ??
@ThomCountryfan5 жыл бұрын
Yes, normally that shouldn't be a problem.
@NeoJSsk5 жыл бұрын
damm it almost look OEM
@joseconstante13216 ай бұрын
What mask should i get eaxactly
@phillipweissburg1882 Жыл бұрын
the music loop was unnecessary at best.
@RaphaelYC6 жыл бұрын
Is ColorSpec Deep Crystal Aerosol Paint - Clear Coat a similar product to the SprayMax 2k clear? Can only get the colorspec one at supercheap, its got 2 pack technology is that means 2k? thanks
@wade69722 жыл бұрын
You did a few things incorrectly no offence but It will only last 48 hours not even a week and it will be bad don’t use it past the 48 hour mark if you activated the hardener trust me you’ll have a hell of a time sanding down your entire project after spraying the expired 2k clear and 2nd thing is activate the hardener right from the hop before spraying don’t spray the plain clear coat on first it’s just a waste of a 35$ can of paint ….
@burrpws19806 жыл бұрын
Should be using an air fed mask with 2K paint and suitable extraction from work area not to put passing people and animals at risk from isocyanate’s!!
@sebastienbolduc56543 ай бұрын
Painted the hatchback to my car and used your typical automotive clear coat. The results were horrible! I had to redo the entire job. The second time around I used the 2K and ended up with professional results. It's an impressive product. Almost similar to applying a clear coat with a spray gun. You can also feel the hardness of the clear coat afterwards during the water sanding process.
@petersrobar1955 Жыл бұрын
I am planning to use the 2K over aluminium and chro-li (brushed finish surfaces) with no primer, straight on metal. any recommendations? will it hold?
@petersrobar1955 Жыл бұрын
also. how much does a 400ml can last? ish...
@aps5524 Жыл бұрын
Some clear coats out of a can are absolute garbage and shouldn’t be sold at all, they provide no gloss and destroy your base paint with extreme orange peel
@VoodooDewey694 жыл бұрын
I would only use this on small parts I wouldn't use it on any big panels professionals want good UV protection and I doubt that clear has any good UV protection and I doubt it's a high-solids clear but for a little parts maybe I use it but it's probably very expensive good for the backyard. techs but professionals won't use it.
@zakkrick5 жыл бұрын
This is just the right can of clear coat I need for my carbon fiber hood
@VoodooDewey694 жыл бұрын
zakkrick no way
@hswing117 ай бұрын
STOP STOP STOP THAT SHITTY NOISE (MUSIC)
@nehuge Жыл бұрын
I wonder how many mils/microns thickness this coat ended up being
@alexandrosilvaalves35878 жыл бұрын
Qual é o nome do líquido q vc usa junto com clear gloss lacquer topcoat?
@sheldonnorton90352 жыл бұрын
Mine splattered a lot and was coming out the side of the nozzle. Even after heating it up a bit and also wiping the tip continually. Not sure what happened. Maybe lint on nozzle. Pretty depressing.
@reza_dc23 жыл бұрын
After the base coat application , did you wipe the panel down before the clear application?
@kirbyroad57434 жыл бұрын
This product should be used within 48 hours after opening the activator. Not 3 weeks.
@patrickpeterman48905 жыл бұрын
WHAT WOULD YOUR PROCESS BE TO SPRAY A CLEAR COAT OVER "CURED URETHANE ACRYLIC ENAMEL SINGLE STAGE PAINT; THE FINISH ON THE SINGLE STAGE PAINT IS DULL?? I MAY NOT HAVE APPLIED ENOUGH WET COATS OF PAINT- NOT SURE WHAT THE PROBLEM WAS?? I WAS THINKING OF USING THE "SPRAYMAX CANNED CLEAR COAT; APPRECIATE ANY AND ALL ADVICE; I,M NOT AFRAID OF WET SANDING OR PREP WORK ; I JUST WANT A BETTER/GLOSSIER FINISH; THANK,S LOVE YOUR VIDEOS LEARNING AS I GO ALONG,PATRICK.P
@peterwho93803 жыл бұрын
I was using Duplicolor automotive clear coat and that crappy product will blister being exposed to hot water even from a manual car wash! I'm gonna try this product as I've heard many good things about it and hope my blister days will be over!
@rawsonzone3 жыл бұрын
Do you think I can use it on top of the vinyl decals of my RV to prevent fading?
@itsjussjerry9 жыл бұрын
And how do I know of this can be used over my base coat? I get the paint can from my local autoparts store and it says "single stage" on the can
@VoodooDewey694 жыл бұрын
ItsJussJ Only use over 2 stage which is basecoat clearcoat single stage it's just means it's more of a enamel coat which doesn't require clear coat to shine is in it but you do not shoot clear over single stage paint you will have problems.
@robsnizzle7Ай бұрын
Thanks for the video man, just came across this, been looking for a solid rattle can option (painting street bike body parts) think I may switch gears an buy this instead of the clear I've already used...can this be applied onto existing painted surfaces that have different paint type (meaning does it have to be paint from this company as well)... hope that made sense.
@customspraymodsАй бұрын
@@robsnizzle7 Hey no it can go over any other paint brand.
@robsnizzle7Ай бұрын
@@customspraymods Nice!!! Thanks for the quick reply.... 🤙😎
@hhova2910 ай бұрын
Nice video How Ling should you wait im for the 2k can to dry before wanting to wet sand the orange peel and polish?
@thnkbg6 жыл бұрын
How long between coats? how long before dry? after 3 days my plastic headlights was still sticky with lots of orange pill... I was stupid and seen some debris on the lights & wiped the debris off with 99% alcohol & rubbed the 2k clear coat off as well after 3 days....smh..... any advice?
@Snip596 ай бұрын
With that need to use the full can or buy the other one which you can reuse all the time.
@wunicosuave8 жыл бұрын
what brand paint did you use for the base coat out of the can? it came out real nice
@njoyridin3928 Жыл бұрын
Can that be sprayed over a epoxy enamel paint without pulling the enamel off?
@michaelvarela35374 жыл бұрын
I just did mines but looks cloudy. . I did 3 coats waited 24hrs wetsanded and resprayed another 2 coats. It is silve but i just dont see the deep gloss.
@owendowling56392 жыл бұрын
What sort of mask do you recommend when using this stuff outdoors? just for a one off small project..
@myscreen2urs4 жыл бұрын
What primers and top coats would be compatible with 2k? Do I need to worry about that? Can they have any nasty reactions like crazing or bubbles?
@TheLoneRanger19923 жыл бұрын
Does the 2k have to have the hardner plug or can you just buy normal 2k without the red plug in the bottom?
@nicholasdalaris79802 жыл бұрын
just asking how many 2k spay max gloss did you really use because 1 can would not do 3 coats
@alexsallery4 жыл бұрын
Hey mate, I’m looking to spray paint my alloy wheels to black, would you reccomend a cost of primer, 3 coats of base coat (black) and 3 coats of clear coat on top? Is the clear coat needed? What is the clear coat for? Especially on wheels Thanks mate
@crazy4rc8 жыл бұрын
I use a 2k clear/high gloss that doesn't require the mixing of the activator.. in your experience which do you find better
@link2508 жыл бұрын
I'm looking at a car that has had 2 panels resprayed due to clearcoat peeling off. the color match looks good. trouble is they never finished off by putting any clear coat on. do you recommend this method or will i need a painter to do the whole thing including color? thanks.
@vmaxcec6 жыл бұрын
I use this same make over waterbased and cheap rattle can paint... it works fine...
@dereknyc44028 жыл бұрын
I put the can to close to the bumper while spraying and now I got think waves every few inches, how do I fix them without repainting? Thanks
@johnmokma88976 жыл бұрын
What type of base coat did you use? Brand etc... Is that product a acrylick urethane base? Thanks for the goid tips and vids!
@hampusforsberg42537 жыл бұрын
Did you use a 1k base?
@Matt-wt9qd2 жыл бұрын
Does this can have to be used in 24HRs after activation like some people say or will it last a few days after activation?
@robertwoody95732 жыл бұрын
If you use a clear in a airbrush ,how the hell do you clean it out.
@codewahn5 жыл бұрын
What is your method to spray this stuff as it seems to spray out much stronger than a normal spray can and then the nozzel fans out more to. Would this be more similar to a spray gun
@kr18862 жыл бұрын
Thanks for that but can you do something about the sound quality in future videos?
@michaelhannan83054 жыл бұрын
Is it available in matte finish? Can it be sprayed over 35 year old paint, to protect the old truck look?
@88bumbim4 жыл бұрын
i have a fender and when i finish painting it, it is a different color than what is in the can. The paint matches the rest of the car perfectly when i spray a test spot on the car. The fender is from a junkyard. When i first painted the fender the color came out correctly. That was with another brand of paint. Any ideas?