3.2.1.9 Lab - Configuring Basic RIPv2 Part-2

[@fawadali7529]

Hello sir , I hope you get it read this. I just want to thank you so much for taking your time and making this video (and others as well ) to give students that extra help they need. Last week I stayed late on campus while all other students left because I was having trouble understanding and finishing this lab. I couldn't have dont it with out your videos, and many other previous labs .Again I am really thankful for your top quality videos with everything you show and explain. Best regards

[@TechAcad]

Thank you my dear Friend And you can share our channels with your friend.

[@sharylriley7405]

AWESOME work! Clear and concise. I also liked how you separated the setup from the configurations. Well done!

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@thefirst-yb8sj]

You did more than well, thanks a million times. God bless you.

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@diegomontano4233]

Thanks for this, now I can graduate from my university

[@TechAcad]

Thank you dear Friend for your great support and I wish all the best.....

[@sumanyadav18]

pinging from PC-A and PC-C to 209.165.201.2. Were the not pings successful?

[@mohanedhabib2372]

Thank you so much for helping me to understand this better

[@davierlim2409]

You are doing an amazing job thank you so much!

[@TechAcad]

You are so welcome!

[@microbrew4108]

Good morning, Quick question. I was able to ping between PC-A and PC-C when it did not work for you. Did I do something incorrect?

[@microbrew4108]

I noticed at the 4:30 area when setting RIPv2 on R2. You did not use the "passive-interface" commands as you did on R1&R3. Do we not need to do "passive-interface s0/0/0" and "passive-interface s0/0/1" commands?

[@TechAcad]

Hi Thanks for your great support. Passive-interface is used to avoid sending dynamic routing update to any area specially LAN. This updates only needed router to router.

[@Shannxy]

@Sony Milk Yes and no, you need to use the command on R1 and R3 to prevent unecessesary routing advertisment to be sent to the switches. You should definitely not write "passive-interface s0/0/0" on R2 as it would prevent the entire purpose of RIP, because it would prevent R2 to share information with R1

[@tom.bailey]

Thanks for this, very helpful!

[@davidkain3765]

Thank you. This is the longest PT we have had yet. Many new commands. Still a little fuzzy in my understanding. It will come. Regards Dave

[@chaviroad4418]

hai sir mine one is on R1 the gateways of last resort is not set how to set that after i already reach step 4 but still don know how to set the gateway

[@TechAcad]

Hi we given all the instruction in the video itself. If you still get trouble let us know. Glad it helped And thank you so much for your great support and sharing my dear friend...!!! If you wish to get any support, you can contact our team using our website.

[@Shannxy]

What does major classful network boundaries mean?

[@MrWampire45]

The students thank you for your help :)

[@TechAcad]

Really glad to hear it!

[@seanshelby3936]

Hello sir I need little help. I was able to ping from PC-A to PC-B but I get Destination Host Unreachable when I ping from PC-C to PC-B. Why is this?

[@TechAcad]

Hi, sure Please contact our team using our website, link will get from the latest videos description.

[@seanshelby3936]

Okay sir I will

[@denissedamian8750]

loved it!

[@TechAcad]

Thank you

[@bilqeesdahir6432]

thank you so much, its really helpful.

[@TechAcad]

Thank you so much my dear Friend........

[@sirkonrado2287]

Thanks!

[@TechAcad]

Glad you like it!

[@BobPhD_]

thank you

[@rafikozz]

i got a problem with Part 2 step 3 question c, i only have 1 subnet instead of 3

[@umburonaldhbaba7571]

Thank you bro

[@TechAcad]

Welcome

[@shahzadachaudharyyt7221]

bro i have to make an assignment and need help for it can you help me? you can charge your fees if you want

[@TechAcad]

You can contact us! Details given in the description!