3/8" Drive Spark Plug Sockets Overvew & Discussion

[@richb2229]

I like the GearWrench magnetic swivel SP sockets they work especially well for spark plugs that have coil packs attached. They don’t leave behind a rubber boot.

[@boostitbob2192]

Keep up with the videos ! Your channel is a good help on tools I should get ... 👍

[@CatusMaximus]

Thank you and I will we have a lot of videos to come

[@dalejr4113]

Catus Maximus were gonna hold ya to it!!!!

[@scottcarlon6318]

Arn’t you concerned with using impact sockets on aluminum heads. I would be concerned about striping the threads, although, I guess you could use your socket and extension with a regular ratchet.

[@CatusMaximus]

I use in my hand most times but every once in awhile you'll run into an old Iron Head in the spark plugs can be quite stuck in those

[@MrCROBosanceros]

1:55,Can you let us know,who makes that extra deep 5/8" socket? I'm considering to buy similar socket from Snap-on,to avoid use of extension for my Toyota Corolla and Yaris. Length of Snap-on 5/8" socket is 5-31/32".

[@CatusMaximus]

PowerBuilt 5/8"x4-1/2", 648428

[@MrCROBosanceros]

@@CatusMaximus Thank you very much!

[@hachi-rokuperformancegroup3987]

Those double swivel look very helpful

[@CatusMaximus]

Yes they are a interesting spark plug socket that has been surprisingly handy although it is a bit long

[@crustfu358]

I have these black Milwaukee 3/8 sockets but they didn’t fit what would I need to buy to remove my spark plugs?

[@CatusMaximus]

I would recommend going to o'reilly's auto parts stay half some nice spark plug sockets with magnetic insurance more than likely you need five aids but you'll wanna do check your smart lock size see get the right one

[@hirakmohanray667]

For Honda 1.5L ivtec, 16 mm spark plug spanner is required or 5/8” will fit?

[@kon443]

Great video those double joints look cool

[@CatusMaximus]

And they work well too

[@kamara8842]

I have a 2008 nissan rogue s, I'm trying to figure out the correct socket size to remove the spark plug, I tried 9/16" and 5/8" but they didnt work and 13/16" was too big and didnt fit the tube, do you have any idea what size would be bet to use??

[@donnybra1230]

18mm 15mm Google it someone's had your problem go to auto store and test fit some

[@johngibson3594]

Have you used the double swivel sockets.

[@misterrightfix4129]

John Gibson Hey Man! Please!! tell us about those, thanks in advance.

[@CatusMaximus]

Yes I've used them on Subarus

[@CatusMaximus]

They are available at CarQuest or can be ordered online

[@johngibson3594]

Great vid as well

[@YungJosh50]

2:19 What you "know on the BMW Minis" is actually incorrect. They utilize a 14mm 12-point, not a 13mm.

[@CatusMaximus]

Thank you for that correction