3 Dainty Turquoise Cuff Projects : A Beginner Silversmithing Tutorial

This tutorial shows how to make 3 different delicate Turquoise Cuff bracelets. These are beginning level projects. For materials, I used 14 and 20 gauge sterling round wire, number 7 sterling triangle wire (2.62 mm), 26 gauge sterling sheet, and 3/16 inch (4.76 mm) fine silver bezel strip in 26 gauge. If you see me make a piece of Jewelry you'd like to purchase, contact me through my website. As always, I use hard silver sheet solder and a liquid flux.
Buy my new Ebook: chads-silversmithing-shop.fou...
It is important to use safe practices when dealing with fire, sharp tools, and chemicals. Here is a video on safety: • General Silversmithing...
I enjoy sharing my knowledge with others, as I've taught people for most of my life. This hobby turned into a fun side gig for me for years while I taught public school. I love suggestions and hearing about others' experiences. What is your favorite project? What kind of tutorials would you find useful? Scroll down for information on my new Patreon!
Please feel free to share this video, and I would love to have you subscribe! Make sure to ring the bell for updates when new videos are uploaded.
I am now an Affiliate of PepeTools. Please follow this link to check out some of the great products they have:
pepetools.com/collections/rol...
I just passed 12,000 subscribers! Thank you all for making that happen.
If you’d like to contribute to my efforts, or express appreciation, you can at the link below.
www.buymeacoffee.com/cvpark7
Thank you so much for all the kind words and suggestions!
Here is my website where you can purchase my jewelry, and can inquire about classes if you are in the Northern Colorado area:
www.cvpsilver.com
Thanks,
Chad Parker
Join My Patreon!
www.patreon.com/user?u=5602676
Tier Information:
Silver Supporters
$5/month
This is a much appreciated way for you to support me while gaining access to some exclusive ad free content.
What's included
* Support The Artist
* Ad-free content
Silver Super Supporters
$10/month
You receive all benefits from the first tier as well as a shout-out on my channel. Here you will also get some behind-the-scenes peeks, and voting power concerning some upcoming content.
What's included
* Support The Artist
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
Silver Stars
$25/month
This tier provides all the benefits of the 1st and 2nd tier. In addition, you get access to a monthly live stream, a Q & A session, and discounts on jewelry.
What's included
* Support The Artist
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Commission pieces mutually agreed upon(delivered by mail)
* Livestreams
* Live Q&As
* 15% off jewelry purchases
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
Silver Superstars
$150/month
This level of membership provides all the benefits of the previous 3 tiers. In addition, it includes live-streamed interactive instruction in a small group format twice per month for 8 hours per month total. This tier is limited to 4 people for now.
What's included
* Support The Artist
* Private community
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Livestreams
* Live Q&As
* Live Virtual Small Group Instruction
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
* Commission pieces mutually agreed upon(delivered by mail)
_______________________________________________________________________
I NOW HAVE MERCH!
Click the store on the KZbin channel page to check it out.
, or here is a link:
chads-silversmithing-shop.four...
#jewelrymaking #silversmithing #jewelry #jewelryhandmade #jewelrytutorial #jewelrydesign #jewellery #jewellerydesign #handmade #maker #crafts #jewelryartist #bespoke #artist #silver #scrap #diy #jewelrytips #finding #chainmaking #knot #ringtutorial #soldering #rings #ring #curvy #framework #jewelrytutorial #tutorial #simplejewelry #easyproject #simplejewellery
#beginnerproject #braceletdesign #cuffbracelet #beginner #cuff #turquoisejewellery #turquoise #silverbracelets #links
Make 3 delicate turquoise cuffs
Turquoise beginner projects
Dainty Cuff Designs with Turquoise
Making Silver Jewelry
Making Jewelry
make jewelry at home
make a silver ring
make silver jewelry
jewelry tutorial

[@annjessup1670]

Another excellent video and now I’m off to purchase the e Book!

[@chadssilversmithing]

Thank you Ann! It takes me a few days to make a file handle, so I will get that in the mail sometime this week:)

[@SheranSimo]

Nice! Easy projects for easy sales!

[@chadssilversmithing]

Thanks Sheran! I expect I'll sell these this summer at a show:)

[@kimlyons8550]

thank you.

[@chadssilversmithing]

You’re welcome Kim!

[@bethfarmer4142]

Great technique using C clamps instead of pliers! Thanks!

[@chadssilversmithing]

Thanks! Less likely to slip. I should get some smaller clamps though:)

[@lauryltedesco3436]

Beautiful! And perfect project! It may be beginner level, but those tools you showed us are used throughout every project in one way or another-and I think it’s always a good idea to go back to the basics sometimes. It refreshes me, and usually inspires me to make something new! So thank you so much Chad, thank you for sharing your knowle😊🙏

[@chadssilversmithing]

Thanks for the really nice comment Lauryl!

[@tahomyjo]

Awesomeness :) good job Chad

[@chadssilversmithing]

Thanks Tahomyjo:)

[@bojicasin]

Pretty!

[@chadssilversmithing]

Why thank you!

[@heidihale2611]

Hi Chad. Just the perfect.size.for me to start with. Thank you. Heidi from Studio Katahdin

[@chadssilversmithing]

Hello Heidi:). I’m glad you like them!

[@kimkreutzberg4528]

Perfect timing as I just acquired a bunch of turquoise and I have not had a chance to work with it yet!…Thanks for this great tutorial ❤

[@chadssilversmithing]

You’re welcome Kim!

[@carmencpagan1955]

Buenísimo gracias

[@chadssilversmithing]

¡De nada! Me alegro mucho que lo hayas disfrutado :)

[@adinastewart4636]

The Durston Cyclone soldering torch might be a good alternative for annealing larger pieces of metal and making bracelets.

[@chadssilversmithing]

I've never tried this model. It seems similar to other small butane portables. You've done large cuff bracelets with this type? Thanks for the comment Adina:)

[@betojdesigns]

What great timing for this project. I have caught myself without any more silver sheet. Definitely need to hit Rio for a reorder, but this could be something I could work on in the meantime. Thanks Chad, all 3 look great.

[@chadssilversmithing]

Thank you Van:)

[@Gazz_R]

3 Beauties! Mrs Gazz loves turquoise, so she's going mad about all 3. Thanks for all you do Chad and take care.

[@chadssilversmithing]

Same to you Gazz! Thanks:)

[@julescarlito1197]

I’m watching from Australia, loving your videos and all your tips. Any chance of giving the measurements of components, sheet, wire etc, in millimeters as well? In Oz we measure our precious metals in mm not gauge.

[@chadssilversmithing]

Hello Jules! That's a good idea. I will try to start doing that as I go forward:)

[@BIGBUDDY291]

Those are awesome. Great work Chad. I do make jewelry, just a hobby keeps me busy. I see you are in Colorado, so am I. Western slope. I did sub to your channel. I use to watch Soham Harrison, I think he retired cause he hasn't posted in while.

[@chadssilversmithing]

Thanks Buddy! I’ll have to check his channel out:)

[@ericericson4]

I enjoy watching your layout procedures.

[@chadssilversmithing]

Thanks Eric:)

[@ameliasphotography3406]

LOVE THIS! BEAUTIFUL ! Quick question. Have you ever done a tutorial on making a sea turtle pendant? I have been looking all over for a good one but haven't found one yet. Thanks for these wonderful tutorials Chad!

[@chadssilversmithing]

Hello Amelia! I’ve made a few sea turtle pendants, but I’ve yet to do a tutorial on one yet. This video shows a pic of one I’ve done. I will probably do a similar one sometime as a video:)

[@gemnosity]

Great video! Thank you for posting. What length wire do you use for cuffs?

[@chadssilversmithing]

Thanks! The length on these was between 5.75-6 inches (14.6+ cm) or so.

[@NineFingerNative]

Excellent job, where can I go to see you do a cuff bracelet that’s encrusted with turquoise cabbs ??? Now that would be a video I’d love to see you do. I’ve been trying to do it on my own but cannot get it to turn out correctly, the bottom of my base plates never match the curve of the bracelet. Uggggh !!! And with the price of silver I’m ready to give up on it. -:-/

[@chadssilversmithing]

I'll probably do a big chunky piece with multiple turquoise cabs at some point. I feel your pain regarding silver prices!