3 Parts Wood Finish

Рет қаралды 11,658

3 ай бұрын

S4E02 I've read about it, but this is the first time I've tried it. I mixed equal parts of MINWAX Satin Spar Urethane, Boiled Linseed Oil, & Oderless Mineral Spirits to get a universal "Shop" wood finish. Stir well, wipe on, let alone for 10-15 minutes, then wipe off the excess. I waited 24 hours between coats and applied three coats to the "backside", "underside", or bottom (I used all of these terms in the video, sorry) of an upcoming project I'm calling "Frankenbench"
Be an Early Riser, Get Up, Get Going, Have Fun & Stay Safe...

Пікірлер: 38

@sawzall69 3 күн бұрын

Outstanding video presentation. The finished you made is exactly what I need for my project. 500 Grit?

@marvistawoodworks7624 2 ай бұрын

Thanks for posting this. I used the same formula for a long time until I received a tip from a professional finisher: 3 parts varnish, one part BLO and one part mineral spirits. This allows building-up a thicker coats of varnish.

@EarlyRiserWorkshop 2 ай бұрын

That's easy, thanks! Just bump up the varnish content to your liking.

@EarlyRiserWorkshop 3 ай бұрын

I think you’ll enjoy the simplicity and value as much as I do. Best of luck!

@johnlounsbury6191 3 ай бұрын

going to try this approach, thanks

@johnnyc563 Ай бұрын

It may be politically incorrect today, but this finish has for decades, been called, witch's brew. Be aware though that boiled linseed oil does not dry very fast & will keep the finish sweating on the top. it needs to be wiped down a few times.

@EarlyRiserWorkshop Ай бұрын

Thanks for the tip!

@coppulor6500 Ай бұрын

Very cool info. Any tips on getting cedar sapwood to absorb stain for exterior? The white sapwood on my cedar boards looks like absolute trash compared to the rest of the cedar. So much so that I really have to be incredibly picky and that's very difficult and time-consuming to do. Anyone have any thoughts?

@EarlyRiserWorkshop Ай бұрын

Any penetrating finish will have trouble with the dense fibers in sapwood. The only method that I know of that helps, is to apply a first coat of conditioner, which helps to seal the soft wood somewhat, so the stain will not be as dark.

@coppulor6500 Ай бұрын

@@EarlyRiserWorkshop conditioner doesn't seem to do anything. But I appreciate the reply!

@BobWesneski Ай бұрын

Can I apply this finish to stained wood or must it be completely raw? I’m making a cabinet to hold kids’ backpacks. Is this a durable enough finish?

@EarlyRiserWorkshop Ай бұрын

Yes and yes. Three coats should give enough protection for your project. Don’t use it over a product that is stain and varnish all-in-one. That’s actually a film finish preventing oil blend from penetrating into the wood.

@PiercesPerfectPieces 2 ай бұрын

So I’m guessing it doesn’t really matter how much you actually put in/add (of each) as long as they’re all the same amount??

@EarlyRiserWorkshop Ай бұрын

Sorry for the late reply. This was my first time with this blend. I think you're correct, that it really doesn't matter as long as each coat "wets" the surface. I found that multiple coats do build up the finish.

@mustelina Ай бұрын

Would def like to try w a substitute for the mineral spirits.

@EarlyRiserWorkshop Ай бұрын

I read about a Klean Strip option on their website. Let us know what you end up using and how it turns out!

@mustelina 29 күн бұрын

I went to the Kleanstrip website and checked out their “green” mineral spirits. The VOCs are much better, but it’s still a petroleum product. I would really like to find a plant-based product.

@dougkielkopf7572 29 күн бұрын

Turpentine

@mustelina 28 күн бұрын

I went to Kleanstrip website and looked at the msds for their “green” product. Fewer VOCs but still petroleum product. Would prefer to avoid that.

@JohnColgan. 2 ай бұрын

What sort of durable finish do you get? Wearproof? Waterproof? weatherproof?

@EarlyRiserWorkshop 2 ай бұрын

I’m expecting the same durability as other wipe on varnishes like Watco Danish Oil. Perfect for indoor furniture but not the best choice for outdoor exposure. Since I’m using it on my workbench, I expect to reapply a coat every now and then from wear.

@garybaumann5637 2 ай бұрын

One thing I don't understand and you're not the only one that does it. When you apply the second and third coats, aren't you pretty much wiping all the finish off? What's left on the surface?

@JohnColgan. 2 ай бұрын

@@garybaumann5637 repeating coats still accumulate soak in to fill surface pores in wood grain. Only wiping off excess that hasn't been absorbed

@skipperrichman4278 Ай бұрын

what does the linseed oil do in a mix of Urethane and mineral spirits ?

@EarlyRiserWorkshop Ай бұрын

Boiled linseed oil penetrates deeply into the wood fibers. Aside from adding vibrance to appearance, it does help with repelling water, and some protection against scratches.

@skipperrichman4278 Ай бұрын

@@EarlyRiserWorkshop As I have already put down 4 coats of urethane I'm guessing its not a good idea to use the linseed oil ? Thanks again for the idea

@EarlyRiserWorkshop Ай бұрын

You’re correct. The shop blend is meant to be applied to raw wood, and then later over time, to refresh the surface. Previously applied film” finishes would prevent penetration, unless stripped and sanded first.

@coppulor6500 Ай бұрын

What kind of wood is that? I didn't catch it if you mentioned it

@EarlyRiserWorkshop Ай бұрын

It's solid walnut. A previous woodworker had machined it for a table. He stored it, on end, in a barn and it became warped and checked from wicking water. I bought it and rescued it for my workbench.