Very thankful that I found your video. I tried the paperclip option, and it worked! Appreciate it very much boss.
@alibacher80414 жыл бұрын
Thank you it helped me big time, Saved me money and time I did last one with Little wire sticked under clash pedal. It worked Thanks
@ivancipitelo40093 жыл бұрын
Thank you sir, you saved my day!
@TATEXPRESSINC4 жыл бұрын
Definitely gonna subscribe to your channel
@dieselexpresslinellc24046 жыл бұрын
Thank you much man! By the way, if you going to need your engine break, don’t leave the clip in there. Clutch switch affects jack beak
@evodriver63254 жыл бұрын
And cruise control
@brucechopstix8438 Жыл бұрын
I added a toggle switch to it. engine break and cruise just fine.
@sergeynordman38916 жыл бұрын
Thank you, man. You helped me to find a problem with a start. And, of course, you saved my day. God bless you!
@eddiecollazo30414 жыл бұрын
Those are awesome tips thanks
@mauricerobinson8776 жыл бұрын
Floyd! Thanks so much!! Option one worked! Your a wise man 👨
@Finx4366 жыл бұрын
I swear GOD ain't know how to Thank you. You really helpin out. I was about to spend $1k to get my rig fixed into Dupont VA petro shop. Ive watched this video and I tried the last one and the engine crank up. I was about to cry of joy. I spent $849+$112 last night on drive tire and mudflap bracket( Side road assistance) and I woke up this morning with this issue but you really really really help me out dude. I can't thank you enough. May GOD bless
@z_limit.travels6 жыл бұрын
linx finx Yeah Get to a freightliner get that switch replaced and put away the paper clip for a rainy day. 👍 glad to have been of help I could use the blessings. By the way after it started you can pull the paper clip out and plug it back in so you’re speedometer and engine brake work properly.
@Finx4366 жыл бұрын
Floyd-Paul Brannan yes I'll. I still have warranty on this truck in the seller shop. Will pick up load herein and head back to TN where their shop is located...
@lorenzovalasues1384 Жыл бұрын
Can the clutch switch cause truck shutting down randomly while idling and driving ?
@z_limit.travels Жыл бұрын
No . It’s only for starting it. If your truck is randomly shutting down, I did have that problem. First, make sure your battery cables are tight, however, for me Turned out. It was a computer on the lower engine block. All of winter road salt gets down there on seal on the main plug. It’s usually yellow and a couple inches long.
@lorenzovalasues1384 Жыл бұрын
@@z_limit.travels is it the pdnb?
@chamberlain854 жыл бұрын
I really dont know about my cascadia. Took it to freightliner and they put a new starter and a bettery in that order and sonething about reworking the battery cables. $2326 later the truck was starting. Next morning Im back to no start. I tried the clutch sensor wire trick without luck. I then jumped the starter and it cranked and cranked but no start. Then i tried the clutch sensor again thinking maybe I wasnt hitting the clips inside and it fired up. I bet that wont work next time. I am up to my ass in debt and have a truck that wont start. I cant believe people get on her to talk bad at you for trying to help others in similar situations. I understand thats a safety feature but damn it gets expensive calling out repair trucks and shop repairs.
@ro06075 жыл бұрын
Great video.Congrats
@truckerdave88155 жыл бұрын
Why didn't you just go to the clutch switch under the dash and put in a three-stage a toggle switch
@bigslim15535 ай бұрын
This is my method of starting my cascadia. The paper clip !!!!
@caintgitriteexp93426 жыл бұрын
You saved me buddy. Paper clip worked! Thanks so much
@EfrainQuezada Жыл бұрын
Please, please do not be the guy that runs himself over.
@luckyale585 жыл бұрын
This will work thats for sure buttttt , he forgot to say that your cruise control will not workkkkkkk lmaoffff so enjoy old schood foot driving for as long as you are on the road ; )
@z_limit.travels5 жыл бұрын
Tun TuN Yeah cruise control and engine brake don’t work 🤷♂️. However just pull the paper clip back out and plug to plug back together when you go drive, this is heavily discussed in the comments. Just been too lazy to edit video 😓🤦♂️🤷♂️
@luckyale585 жыл бұрын
Thank you men grate job and helpfull i pay to bypass this 100$ when your video wasn’t posted cruise don’t work jakes dooo weird but i get its ok
@saeeda30986 жыл бұрын
Bless you my good neighbor I tried your last method the easy one and it worked thank you
@jonablaka18526 жыл бұрын
Thank you sir for the video very helpful 🙏🏻
@arshgill4976 Жыл бұрын
Thank you. It worked for me
@phayakoot15 жыл бұрын
But, Jake brake does not work ( If you by pass )
@quymai35163 жыл бұрын
Good video thank u
@aaronfobar37706 жыл бұрын
Thanks for the Video! You saved my day!
@marcust.williams72106 жыл бұрын
Where’re you located?
@tatankaproyect19564 жыл бұрын
Thank you boss! You save my day, U got a new subscriber!
@readingisfund-a-mental11577 жыл бұрын
I have kill switch on it also.. but I push in button for that and turn ignition switch naddda☹️ had to tow start yesterday
@usdpaulp7 жыл бұрын
Big thank you! #3 worked great on my 2016 cascadia.
@z_limit.travels7 жыл бұрын
I'm glad it helped somebody. Be sure to secure that paperclip and don't let it ground out on anything cover with electric tape or something until you can get the clutch switch replaced. Don't quote me but I think that switch is like $60-$80 or maybe was $40, I can't remember, plus labor of course.
@usdpaulp7 жыл бұрын
Floyd-Paul Brannan my switch is actually fine. I did it because I don't want to have to push the clutch pedal down when starting the truck in the middle of the night ( too lazy to put on my shoe). only problem is now the cruise and engine brake don't work. I'm going use the #3 bypass with flip switch in the dash to get past that little issue.
@z_limit.travels7 жыл бұрын
Interesting I didn't know the clutch switch would affect the Jake break and the cruise control, must be a thing for the newer trucks I guess, mines a 2011 doesn't affect mines at all even when I had my paperclip in there for a little while.
@marixsas4387 жыл бұрын
Floyd-Paul Brannan I have 2011 cummins isx , cluch bypass work great but stopped working my engine brake and cruise control
@z_limit.travels7 жыл бұрын
Hmm I guess my truck it's weird I have a DD 15 message that guy in above comments apparently figure a way around that
@rupetsg7 жыл бұрын
Hey! Thanks for video of by-passing clutch on freightliner. Question. Can you leave the paper clip in the plug while driving? Or does it do something bad to main computer on truck?
@z_limit.travels7 жыл бұрын
Yes , but tape it up and cover secure it well if the metal hits other metal can blow a fuse. computer will be fine.
@rupetsg7 жыл бұрын
Thanks. I thought the same, but just wants to be sure. Stay safe driver!
@aikdesi9646 жыл бұрын
Good trick..waiting for something that can help us delete DEF altogether. Its so expensive to maintain and doesn't help small o/o like myself.
@transport215 жыл бұрын
Athar Ali did you delete it?
@jorgeTorres-xk7ff7 жыл бұрын
wow wish i wouldve seen this earlier man i paid 400 dor someone to do this
@samsonsofuwa28086 жыл бұрын
In 2013 freightliner cascades showing in dash board no eng break, no cruise, abs light on, no cab & no data. Then I,ve been in freightliner dealership they could not find the problem. What can I do? Please I need help.
@z_limit.travels6 жыл бұрын
Samson It’s your main engine computer it probably got wet somehow. Driver side under or in between the frame, kind of behind the wheel close to the ground sort of. Check the connection most likely rotten from salt spray and it will cause all of those above faults. Gray looking box with heat fins. 2 Flat plug of wires going to it.
@deanberolzheimer26585 жыл бұрын
I had this same problem recently, and traced finally after 3 days to the run relay in the dashboard fuse panel. Replaced Chinese crap relay with Motorcraft crap relay and good to go. I think it was relay 5.
@j.watson61486 жыл бұрын
Please truck drivers do not accidentally leave your truck in gear and go out there and bypass the clutch switch which is also a neutral safety switch to start your trucks because if you do you may get run over and if not at the very least your truck might start in gear take off and cause a lot of damage to somebody or something somewhere this is irresponsible information should not be followed take the time to get your truck fixed right
@jf-he7dd4 жыл бұрын
You’re dumb shit
@j.watson61486 жыл бұрын
If you do not have time to get your truck fixed right you certainly do not have time for a breakdown or an accident that could cost you or somebody else lives or your livelihood
@z_limit.travels6 жыл бұрын
J. The dumb shit welcome to the real world 🙄
@jimmysharavolli28396 жыл бұрын
Your awesome the option 3 worked on my truck fine I have 2012 freightliner cascadia with Cummins isx. Have a question. Can I drive the truck with the clip in there? Also my cruise and jakes are working.
@z_limit.travels6 жыл бұрын
Jimmy Yes you can but be sure to cover it with some tape or something so It don't get grounded out.
@goodadvice73766 жыл бұрын
Floyd-Paul Brannan what happens if you grounded out,
@alwayshere66 жыл бұрын
I tried the top stud and lower stud on my 2009 cascadia and didn't work. What I had to do was take a wrench and touch both the bottom studs together while wearing rubber gloves. Wonder if maybe my starter was wired wrong for me to have to do it that way. Electric probe works great also though.
@z_limit.travels6 жыл бұрын
🤷♂️🧐
@catsos94336 жыл бұрын
Man I'm so happy you wrote this.. I have an 09 and same thing... thank you 😂😂😅
@nestquick9204 Жыл бұрын
would u be willing to send me a pick of how u did it, I took off the entire starter and had it tested and it works. Before I took it off i tried to test it by touching the solenoid screw and the positive by the alternator but it simply did a little spark noise ( no visible spark ) and would not start or crank. I wish to try your method since mine is also a 2009 cascadia so my alternator may also be wired different like yours,. Anyways I pray it isnt the CPC, usually a faulty CPC dont work when the voltmeter stops tracking the volts after turning the key on (not starting it) but in my truck it does track the volts at 12 volts -14 volts so idk
@nestquick9204 Жыл бұрын
@@catsos9433 would u be willing to send me a pick of how u did it, I took off the entire starter and had it tested and it works. Before I took it off i tried to test it by touching the solenoid screw and the positive by the alternator but it simply did a little spark noise ( no visible spark ) and would not start or crank. I wish to try your method since mine is also a 2009 cascadia so my alternator may also be wired different like yours,. Anyways I pray it isnt the CPC, usually a faulty CPC dont work when the voltmeter stops tracking the volts after turning the key on (not starting it) but in my truck it does track the volts at 12 volts -14 volts so idk
@catsos9433 Жыл бұрын
@Nestquick sorry my friend it's been 5 years ago, and it's been sold... hard to remember exactly what I did.
@randykeitt82696 жыл бұрын
Thank you for because if help me to start my truck!
@hectorcordova54104 жыл бұрын
Save my day god bless u
@Josh-of-all-Trades6 жыл бұрын
Watch the whole video! The easiest method is last.
@rummyl314 жыл бұрын
You are the best
@blakehernandez23005 жыл бұрын
That last one did the trick
@chilar64 жыл бұрын
Does the paper clip option works on a 2014 cascadia?
@z_limit.travels4 жыл бұрын
chilar6 if same plug it should 🤔
@kingstvmadeyou78964 жыл бұрын
Super helpful 👍
@falishassan10275 жыл бұрын
Thank you
@alenblambic3597 жыл бұрын
thx for the video buddy
@phayakoot17 жыл бұрын
god bless all you
@bruceberry63877 жыл бұрын
Thanks. FPB
@thomasadam15794 жыл бұрын
Used the paper clip disabled my cruise control 😐
@z_limit.travels4 жыл бұрын
Thomas Pull out the paperclip plug the wire back in it go back to normal this is just a truck not a fix it’s only to get your truck started until you can get the switch replaced.
@thomasadam15794 жыл бұрын
Damn. I’m spoiled to not having to push the clutch. This is the first truck I’ve had like this. Oh well thanks
@brendajones68236 жыл бұрын
Thank you Yesterday it takes 1 hour to star because my swith is damage
@z_limit.travels6 жыл бұрын
Brenda Sorry for the late reply but I hope all is well keep rolling be safe in these bad conditions.
@uneedmorepeople7 жыл бұрын
I'm having a hard time hearing you can you please message me or make another video I believe my clutch switch it's going out. Starter and ignition are brand new but it doesn't start every time usually take 5or more turns for it to crank
@z_limit.travels7 жыл бұрын
Just skip to option three and stick a paperclip in the plug , stick it in number one and three , far left and far right don't put it in the middle hole , Secure it don't let no metal hit it because it will short out something. If you can still start at five times in a row then it should switch for sure. Write me back let me know if it works?
@uneedmorepeople7 жыл бұрын
Floyd-Paul Brannan thanks for the reply, I did option three and it's starting up like a charm only thing is you lose cruise control and the engine brake.
@z_limit.travels7 жыл бұрын
Oh my bad I forgot to add that, because my truck is a little bit older I think the cruise control and engine break thing is for the Cummings and the newer Detroit possibly or maybe my truck is just weird. after you start it you can pull up the clip out and then everything should go back to normal it would be kind of a huge pain in the ass to keep like That , It definitely means that your clutch switch needs to be replaced if paperclip makes it starts every time. Unfortunately means your ignition and the starter is probably fine. I think the clutch which is something like $60-$90 it's kind of in a tight spot that you might be able to do it yourself I think only one Allen head screws holding it on there.
@uneedmorepeople7 жыл бұрын
Floyd-Paul Brannan 2012 dd15 is mine
@z_limit.travels7 жыл бұрын
I think my truck is weird 🤔 ran mine like that for like two weeks till I got my clutch switch replaced. 2011 dd15.
@readingisfund-a-mental11577 жыл бұрын
Well tried it .. didn't work☹️
@z_limit.travels7 жыл бұрын
If you stick a paperclip in there in hole one and three far left far right not the middle. (clutch switch plug) depending how your truck is set up it may cause your engine braking on cruise control not to work but I have to start the truck then you can go ahead and pull a paperclip out if I don't work and that means it's probably a problem with your starter. Then you should probably use my second option to jump the starter. Carefully make sure it's not in gear, ignition on.
@j.watson61486 жыл бұрын
Ooohh. Struck a nerve
@z_limit.travels6 жыл бұрын
J. 🙄
@z_limit.travels6 жыл бұрын
Be constructive and put for something helpful
@z_limit.travels6 жыл бұрын
So if I don’t respond in 10 minutes you somehow think I care about you? What a sad sad person you are. And you somehow think you’re correct in any form or thought surely you are so stupid🙄
@j.watson61486 жыл бұрын
Or you could just buy a clutch switch and install it. Idiots are everywhere running rampant. Take something simple and complicate it. You in the government?
@z_limit.travels6 жыл бұрын
Your stupidity is pretty amazing. To automatically think that any of these ideas are more than just a stopgap measure is utter nonsense. We don’t all carry around buckets of parts that may break unlike you we all don’t live next to a shop and most of us actually drive our trucks you must sit at home and just look at KZbin talk shit towards people so if you don’t like this response maybe you should shut your mouth think a little bit🤔. Perhaps like helping with advice instead of just being stupid than everybody else that you think is stupid.🙄
@z_limit.travels6 жыл бұрын
Wow your sooo stupid 🤣
@readingisfund-a-mental11577 жыл бұрын
It's not the starter.. I have a 2016 cascadia
@z_limit.travels7 жыл бұрын
Pause the vid at 3:08 - 5:24 take out of gear be sure ignition is on , get a wire hold on the tiny top screw then hold the opposite side of the wire to the stud to the left bend in the wired in the shape of U hold it on there until it starts should take about two seconds three seconds , then pull the whole wire away.
@readingisfund-a-mental11577 жыл бұрын
Floyd-Paul Brannan ok I will try that thank you so much.. I'll let you know waiting for daylight
@newwine3827 жыл бұрын
man this guy is good, but, can you delete the regen. Hard one ha.
@z_limit.travels7 жыл бұрын
Yes you can only with computer only, most shops will do it for some kind of cost like $50-$100 , its called "clear codes" I've done as such to finish a load and get to shop else where , it will return in a few days if problem is bad.
@newwine3827 жыл бұрын
You need come ti to Houston Texans. Open a $hop. It's worth it. If your really knowledgeable about DD15. Modern motors.
@z_limit.travels7 жыл бұрын
no i don't know much, just a Driver.
@Marcusf2506 жыл бұрын
I just tried the paper clip method and nothing happened.
@z_limit.travels6 жыл бұрын
either not in good (paper clip 1and last part of plug) or starter is bad or battery. My best guess. Not sure if this will work on newest trucks.
@JasonweedQ37 жыл бұрын
if I can just keep my dpf system to stop breaking down my 2014 Cascadia wouldn't have many problems at all. Im sick of this crap! Replaced everything even the one box. 11 grand and sometimes still engine light will come on and lose power. it's like you can't even idle the damn truck without thinking it's going to break down!
@z_limit.travels7 жыл бұрын
C Quinn totally true
@pleilua6 жыл бұрын
Your Name Here pete I have the Same issue
@cactusjack18066 жыл бұрын
Get it deleted. Look up diesel spec emissions deletes.
@Almondchimera806 жыл бұрын
I read with these crap dpf idle between 1100 1200 so the soot burns away
@cactusjack18066 жыл бұрын
I got mine deleted, paid $4700. Trucks runs freaking awesome. Only issues I have had is the typical stuff that you can fix or any diesel shop. Google Diesel Spec, they are Canadian based, franchise out their software to US diesel mechanic shops all over. It's a good deal.
@snappertight6 жыл бұрын
Thanks just unplugged at switch and used paper clip. This has been giving me problems for a while having to play with the clutch to get it started.