3 WAYS TO REMOVE CLEAR GRIP

[@foureyedape3561]

I was about to just blast my board with sandpaper, thanks helpful english man

[@BarthiArgento]

Thanks but I‘m a bavarian man hehe

[@renatagolovina365]

Thanks! Even 4 years later it's still relevant!

[@DomGiunta]

This was quite helpful, thank you! I was nervous about using a scraper, and wasn’t sure, but mine is very old, so it should be fine.

[@NycLongboardVibes]

I know your comment was a while back so you probable did it already but if you didn't the scraper works perfectly and it wont take parts of the wood while you scrape. It worked perfect for me.

[@Cosmicvzn]

Giving you a like because I actually found this helpful. Didn’t know there such such thing as clear tape until today when I went into a bike shop to search for grip and you helped with explaining how to remove clear grip! Easier than expected. Thanks!

[@EvergreenTavern]

Thank you for making this video! I’ll probably end up doing a combination of grinding and scraping. Just gotta get the the tape first

[@skyeo5398]

i have the same board the grip was so bad, thank you for making this!

[@ahhhhhha3729]

SO HELPFUL!

[@lifeless.on.the.outside]

This was the most useful video for me, i used the 3rd teckneek, and it worked perfectly

[@lifeless.on.the.outside]

Sorry for bad english btw

[@houndofvalinor8188]

Worked great, thank you! Not sure if already mentioned, but I recommend wearing a mask so you don’t inhale sugar grip.

[@isaactheguitarist4918]

A metal wire brush drill bit would prolly work better

[@virusgamingdude4155]

Thanks bro you really helped me

[@mastermotoff6589]

Thanks so much mate!😄 this was very useful full and will save me from destroying my top graphic

[@NycLongboardVibes]

Very helpful! 👍🏼

[@kideast7601]

Thank you so much

[@Ayorlando]

You should really remove the trucks first and re-screw them through the griptape.

[@jonathanthunderson5658]

Heard a preasure washer is the best way to go. Idk tho

[@BarthiArgento]

Interesting but it's very noisy, wet and the effect is probabile not so good. If you go with the pressure water into little cracks of the surface, you might damage it

[@jonathanthunderson5658]

@@BarthiArgento thats true, but I think it depends on the amount of pressure form the washer.

[@jonathanthunderson5658]

But again I've only head of ppl doing so. Never really tried it that why im here 😅

[@interruptor]

That sounds like a terrible idea... Plywood and water don't go well together....

[@senorsadist1397]

If you want to water log your board

[@steveo7767]

Paint and Varnish remover

[@pwravglex]

tnaks that worked

[@30smsuperstrat]

Just remove the trucks before installing new tape so you can take them off and service them in the future.

[@BarthiArgento]

good tip

[@straight2curveus]

Don't ride in the rain

[@oliviaknight7789]

Does that make it wear off faster? Or is that just a tip to be safe?

[@nyhyl]

​@@oliviaknight7789 I think that comment addresses the fact he was riding on wet ground at the end of the video. It makes your bear rings rust and damages them that way.