3 Ways to Safely Clean INSIDE Headlight Lenses

[@prestigelighting9981]

Eyeglass cleaning cloth. Has worked really well for me.

[@anthonymoore1464]

I'm so glad I just watched this. I had no idea about the inside of the lens.

[@ИвоВасилев]

I miss the good old glass lenses, great video!

[@slashslash984]

Is there a way to clean after you've sealed up the lenses? Short of taking everything apart

[@richardsilva5134]

Following this because I would like to have the same answer I was thinking vinegar cut with distilled water but I'm not sure

[@waris3732]

Nope

[@oldaccount-j8j]

It's like lenses don't even want to be clean

[@user-gk2cg2th9h]

What would you suggest if the film is damaged? I'm in the process of getting a car and I think the headlight has this problem

[@AlexPerez-hg5yu]

At 6:57 you speak of using compressed water. Where can I find it? Drop a link

[@Eric2300jeep]

Good tips man! And for the people talking about rubbing alcohol, don't do it! Even diluted, rubbing alcohol is a very strong SOLVENT. Even at 50% and lower. I used 50% alcohol when wiping down a high quality shroud and it actually caused the chrome to flake off after a day!

[@MikeeVee]

My 2013 Nissan Altima has the projectors inside, the lenses on them are cloudy and need cleaning. I was hoping this would help me, it doesn't seen like it will.

[@oldtimefarmboy617]

One time I had moisture in my light so I pulled it off, poured rubbing alcohol inside, swished it around, poured it out, and blew air into it so all of the alcohol was evaporated. Big mistake. That coating on the inside turned hazy so I had to buy a new one.

[@flyryde]

Sucks man. That’s exactly what sounds like it should work, but no 👎

[@lowhertzhighspl]

I'm sure glad I read your entire comment bcuz while reading I began moving towards my rubbing alcohol thinking I FINALLY found a fix to cleaning the inside of my headlight projector glass without being able to touch it since I refuse to pull apart my headlight assemble from fear of not being able to properly seal them (2011 Ford Edge) I'm about to try using 6" extra large q-tips with a microfiber eye lenses cleaning towel. I had a difficult time installing new LED bulbs last year, I couldn't get them to twist back in due to too much metal on metal friction so I stupidly sprayed WD-40 inside, over spraying inside of the projector lens!!!! What's worse is, I repeated the process on the second headlight!! Good luck to me for removing the year old WD-40 without dismantling the assemblies. Tips/Suggestions will be appreciated, if they are worthwhile.

[@JCG8935]

@@lowhertzhighspl I'm wondering if @flyryde might know if mineral spirits would work?

[@waris3732]

Perhaps try white vinegar

[@JAW11]

White vinegar works amazingly well on the outside but I don’t know about the inside as I had no idea there was a delicate plastic lens on the inside until I watched this video. I have a Honda Fit and recently learned the inside of the headlights cloud over, so no amount of cleaning the exterior is going to fix them. Just for the heck of it though, I mixed white vinegar, baking soda and water and used a sponge on the exterior lights and voila, the lenses are nearly clear. What’s left is on the inside but it’s 90% better than it was! It saved me $1200 at the mechanic. I wish I’d taken before and after photos but I didn’t think of it. I honestly didn’t know it was going to work as well as it did. ❤

[@pinoyyue28]

Is it ok to sand the inside with real fine grit? Or will damage it ? On a civic type r headlihht

[@jacklcc6362]

Hey man any suggestions on how to remove buytl out of the chancels for a fresh bead?

[@helpcambridgeolphysics9729]

How do u open head light

[@TannischaAlexander-e1w]

Do you have a video showing how to get the glass off?

[@Killercustomstmnt.]

I wonder if I just want to clean a spot, would distilled water and fiber cloth will work

[@yerrys1313]

Thank i will try this i open a set of lights for an acura tl and there was some cardboard on the oven (i didn't saw it)and some kind of smoke is now attached to tge inside lenses.

[@hahasteven2266]

I’m resurrecting this video. I have a failed seal somewhere on mine. I’m curious if I need to wait for the headlight to dry before going to a process like this because I want to hopefully take apart paint and reseal using same lenses. Will baking them while wet from inside bake in all that water and such.

[@renasmile]

I don't have an air compressor, can I us a blow dryer to dry of the headlight?

[@B9G1D6N]

Hey, i need your help. I have a 13 lexus gs350 headlight that had some weird what looked like glue that was leaking down from top on the inside the the lense, water wouldn't do anything so i had to clean with a microfiber towel on a flexible rod, i scratched the inside of the lense. Any thing i can do to polish the inside to restore it back to clear? Maybe clearcoat the inside lense? Or do you know where i can buy a lense? Please help im not sure what my options are right now.

[@stephenumphress5705]

Have you ever seen LEDs cause hazing on the inside film? I recently took my stock ones apart to paint the housing black and put new lenses on. I also changed the bulbs to SMDs and I noticed both the sidemarkers sections got hazing around the bulb, so I had to take it apart and clean whatever it was off and re-seal. I switched to a super low heat led and that seemed to fix the issue. BUT there’s no way that any LED burns hotter than stock. I’m just at a loss as to what would cause this other than heat. Maybe the lenses are just crappy?

[@jondough61]

I got a headlight that doesn’t come apart. Only a quarter size hole to get into ? Any ideas?

[@oldtimefarmboy617]

Have you ever thought about wrapping stuff like that in plastic cling wrap before putting it on a shelf for storage.

[@flyryde]

Yup, I actually reference that in this very video, and show that little trick on the video I suggest: kzbin.info/www/bejne/sGmqmqStpLqCi7c

[@stephenfurr8769]

Can’t get new lenses if you’re working with a mod that requires cutting. Have to start over with a new headlight and new cut. Anyway, I got those microfiber towels and that cleaner from your links and on the way.

[@graysong2961]

Does this Plastic film that exist on the interior of the light exist on older cars like a 91 integra?

[@rudychavez1123]

Hello, is there an alternative to OE for my 2017 Kia Forte? I replaced the original bulbs with LED bulbs on the low beam, and really no difference. I do a lot of night driving. Any recommendations?

[@IrishUSMCVet]

Couple of things! you can fix the crazing with a super expensive 3m canopy kit for aircraft. and the microfiber cloths can only be used once for the headlights, after that here considered soiled and will contribute to lens scratching. Learning alot from your channel. wish you were still doing videos.

[@johnnicholson2549]

I have f150 lens that is discolored inside it is a custom light. Can you clean it for me if I send it to you ?

[@Tommyturbo1981]

How do I get the lens off of my 2007 Mazda 3 so I can clean the inside

[@HamoshAbdul]

If we missed up the lenses where can we get them from or that's it we need new headlights!?

[@KYoussef76]

I have a question about this static dust on the inside of the headlight? what is the cause? I have similar situation with my VW Passat headlight. Thanks

[@Eddrange]

I put some HIDs on my projector headlights , why can I see a bunch of lines on the beam on the road? Direction of the bulb maybe?

[@XxIcybluexX]

Are you using warm water or slightly hot water to get the dirt loosened up?

[@jackbauer8699]

I’m missing a dust cover. And now the inside film is peeling. I can’t find a dust cover online for 2014 Dodge Dart GT HELP!!!!

[@triple_threat_lightz]

So these Adams Microfiber towels are better to be use in this application than these Chemical Guys MIC_507_06 microfiber towels??

[@Picks_Productions]

Method 4: Have a fender bender that isn’t your fault, get them replaced by insurance for free lol

[@DriveWithAndy]

My custom headlights had issues and went back and forth and due to them being opened and closed about 3 times they now work but they are misting up like crazy and got all sorts of dirty marks inside. I don't want to be sending them back again. So want to try heat them up, open them up with the slide technique you have shown, clean them and re seal. Shall I still do the washing up liquid and water move around with no running and then dampen a micro fibre and gently wipe? Then I was going to blow dry them and I have kitchen towel to wipe clean. Would this be ok? Then wonder if I need more of that butyl stuff adding or just heat up what there and add more sealant around them the next day. Advise would be great. Thanks

[@BrandonDmv]

Hey I just did a build and hours after finishing the plastics inside the housing all look like they have a white glaze on them. Even though I cleaned the surfaces with soap and water before sealing the housing. How can I remove this without cracking open the housing again which I really don't want to do

[@abcars2856]

Are you in the uk

[@TheKhwailed]

10:10 ... what's the name of the soundtrack??? I love 80's style of music!

[@louvendran7273]

The best way to smooth out glass cheaply is to work the surface with pumice soap and to rinse off as you did. It has micro abrasives that will work out any blemishes. Then to apply a gentle glass polish with a dust free cloth. If you use a 1400gsm cloth or higher to wipe off it will leave minimal streaks. I have cleaned the outside of lenses but not experimented on the inside with the exception of just wiping them with a clean/new cloth with a little rubbing alcohol. Also, the smudges left after air drying can be removed with rubbing alcohol and a soft dust free cloth. The alcohol evaporates super fast without leaving residue. Hope my suggestions can help you. Thanks for an awesome video as always.

[@flyryde]

It’s so crazy. I make videos like this that are deceptively complex. On the surface it’s some idiot acting like water and soap is hard to figure out. In reality, your seemingly rational idea of alcohol and cloth would most certainly destroy the inner layer I spoke about, but in tiny little sections, eating though only where you rubbed, but not where you couldn’t access. It’s one of the worst things you could do. Also keep in mind it’s been 20 years since headlamps had glass lenses, so the pumice idea is out the window. Sucks right? Two totally good ideas are absolutely terrible in reality. Stick to the tips in the video and you’ll be stoked at the results 👍

[@louvendran7273]

@@flyryde Sweet tnx.

[@lamboman9]

@@flyryde mostly true, but my '06 Volvo has glass lenses. Do you know if they have the same anti-fog layer that I need to be careful of?

[@orvelldeonarain9708]

Do you think a mix of rubbing alcohol and distilled water would work? I have condensation deposits and was thinking of trying on my beater first 😂, but maybe you could try it on a set of lenses you already have laying around?

[@flyryde]

It will do a great job at destroying the film on your lens 👎

[@carldchiafullo1394]

@@flyryde...

[@jonathanhildreth3382]

I have the same tree streaks on the inside of my unopened after market head lights. I thought it was from air coming through the assembly. A leak in the housing unit. Yes or no? Also I'm looking for a set of headlights for a 2011 avalanche 2 projector in each housing. Bi- xenon lights. Etched lenses. Smoke halos, and black painted front shield (can't remember technical term). And rgb demon eyes. And entire housing painted satin black ( including drl reflectors and side marker).. the projectors... best that can fit in housing minus laser.

[@alfredocamacho3067]

can you make a vid of how to connect the lights to the cars harness or make them work on the cars power idk if the vid is already done thank you :)

[@EdwinRodriguez-et3sr]

Where can i get the gills from the wrx headlights?

[@flyryde]

@sinister.retrowerkz on Instagram 👍

[@dougyoud5944]

Thanks! I got some butyl inside my rx7 lenses, tried some soapy water and a towel… but think I’ve screwed it up. Will try the lens sealer, and if that fails move on to buy new ones…

[@fernandogodina505]

We're you located

[@SJSOmar]

How much do you charge for angle eyes on a Saab 9-3 2008 something different but never really seen someone do a pair of these

[@PrelandRanger]

Does a dust air can work if I take the back caps off and spray in there ? I don’t want to take the headlights apart?

[@user-ik8fl2xr5t]

I want to do the same.. Did it work for you?

[@PrelandRanger]

@@user-ik8fl2xr5t yes it works

[@mixification]

Recently did my 350Z lights and got a small blemish on the inside of the lens that needed contact to get off, so used a new microfiber and some panel prep for paint and yeah hazed the lens. Since the light is long gone anyway (previous owner butchered the housing by breaking all but 1 clip so doesn't seal unless I cover the outside in silicone) I thought id try the wet sand, clear coat, polish method and for the most part it worked really well. You can still see some scratches at certain angles but like I said the housing and lens are done anyway and this is just temporary until I replace it with a depo housing and lens and transfer the OEM internals over.

[@richardsilva5134]

Awesome video thank you it's good to see your very meticulous with your work. Something to consider is I think you were using a paper towel on the outside of the lens when you were doing a cleanup keep in mind that paper towels and by nature will scratch soft surfaces. Quick question if I do separate my lenses from the housing what sealant should I use to glue back together?

[@jcmottern]

Elmers glue. You're welcome 😁

[@thewiseone8191]

PLEASE HELP ME MAN. I HAVE CONDENSATION BUILD UP INSIDE OF THE LIGHT. I DON'T HAVE HAVE THAT SPRAY YOU USED OR COMPRESSED AIR. WHAT CAN I DO???? PLEASE RESPOND THANK YOU

[@flyryde]

... but, why are we yelling?

[@GrabinGears]

Use some alcohol bro.....I know the feeling.

[@GrabinGears]

@@flyryde why couldn't you just answer him? Instead of some snarky reply..

[@flyryde]

Just A Trucker first off, I made him a free long ass video telling him exactly what to do, how to do it, and why. You my man, came in with something I specifically said would ruin his lens (without even knowing it was terrible advice), and then criticize me. Cute bro.

[@GrabinGears]

@@flyryde Free? Your channel is monetized lol. His view is paying you stop it. Where do you people get alcohol will ruin the lens. I used 70% rubbing alcohol and it came out looking great 🤫

[@SuperSany18]

Recently I was doing some modifications on headlights and washed inside lens with sponge and some dishwashing soap and ofc made mistake and than fixed or I hope I fixed mistake by sanding inside lens with 2.5k grit carefully with very light pressure and after washing again with water and drying with paper towels than I used burdock oil to do some polishing inside again with paper towels and it looks amazingly good, not sure if it's gonna last. Also outside lens was sanded all the way from 150 to 2.5k grits and polished with burdock oil and I never had cleaner and better lenses since I have car. Again I'm not sure if that was right thing to do and will it last, it was just desperate experiment and results are amazing currently. Headlights are from Audi A6 1998y.

[@EscapePlanSkateboarding]

Update?

[@baryka7procent767]

ounce i live caps open in sprayroom and same problem

[@garforce2]

I use the same sealer but can’t remember where I found it lol, i’ll have to look at local Oreilly

[@flyryde]

I’ve been buying this stuff ever year for the last 6-7 years. It lasts a looong time.

[@EricVirtueable]

"just vertical paths", this is what youtube was made for man, freaking sick.

[@transamin85]

I wonder if cleaning then using a ceramic coating on the inside would fill in any tiny scratches

[@waris3732]

Only one way to find out

[@JD-wm4uv]

Any tips on cleaning the inside of a stock projector lens without removing the clear cover . I've removed the light bulb having difficult time cleaning don't have tool long each to reach inside of projector lens its kinda cloudy and dusty cause it's a 2011 🤔 any suggestions on what to clean with that won't leave residew I just want them crystal clear no haze

[@user-ik8fl2xr5t]

Did you find a solution? I'm having the same problem

[@JCG8935]

I love your videos... I saw that you have it coming out of the oven with hardware and wiring still in it, is that usually OK?

[@flyryde]

Its ok 👌

[@JCG8935]

@@flyryde if I'm going to be doing the degreaser dip I should remove EVERYTHING though, right?

[@turbosmike2046]

Have you seen the videos of a magnet wrapped in a cloth and placed thru the headlight bulb hole with string and then pulled across the inside surface by a magnet wrapped in cloth on the outside of the lens? Thoughts on that?

[@flyryde]

Lol yeah. It was cute 🥰

[@turbosmike2046]

@@flyryde recommend trying it on somewhat cheap lights?

[@evo_dann]

Thank you for your informative videos! Anyway you could possibly work with Depo to start making lenses for cars that they don’t make headlights for? For example Evo 7-9s. I feel there’s a market there for them.

[@EmmAyeVee]

You contaminated the microfiber cloth with your barehands. As well as using the tap water and distilled water. Also when using the compressed air to blow out the water, hold the lense upside down so gravity can do its job. It will prevent any floating particles from landing inside too.

[@villicanajorge]

Where do you purchase those headlight gills you installed on the wrx lights

[@flyryde]

@sinister.retrowerkz on Instagram 👍

[@keith38able]

why not skip the tap water and just use all distilled?

[@flyryde]

I’d be curious to actually measure the amount of water I used in the sink. While for you, I sped through the long dull parts of washing them out, the reality is, I’d have used up 10 gallons of store bought Distilled water, only to achieve the same results.

[@AW-tm8kh]

How mate, do restore headlights for clients. If so can you reach out to me for a quote. .cheera

[@brianhouts]

Why!! My lenses hazed after my last build, and yesterday I cracked them open and clean them. They cleaned up but the irony that this video pops up in my feed after I cleaned them.

[@flyryde]

What method did you use to clean them up? How did they turn out?

[@brianhouts]

FlyRyde I used dish soap and a microfiber to clean them up then compressed air dried them. I didn’t think to use distilled water that’s clever. The haze is from something off gassing either paint or adhesive. It’s the only thing that makes sense. They cleaned up fairly well, no more cataracts even with a new microfiber i got fine lines. These are my personal test lights so I’m still trial and error. New lenses would be the next step. Great videos I learn so many tricks. Keep it up.

[@IIucki]

Cuanto cobra usted por instalar luces de colores

[@jimmybagg9439]

How can I get an exact length for a Cadillac ATS headlight??

[@flyryde]

Hmm?

[@jimmybagg9439]

FlyRyde led strip *

[@NajarOffroad]

As you’re washing the lens look super close in the reflection for the like to give this video!

[@flyryde]

Did you smash the like button

[@aworthington4966]

So how can u clean the inside lens w/o taking the whole car apart to do it

[@Rebecca_The_Dragon]

Had my oem lights replaced by the dealership for flaking exterior coating, new ones looked great until i took it for a wash… water on the inside, left spots. Sadly this warranty claim was fulfilled on the last week of the cars warranty and now its either spend 700 on a new driverside light or go aftermarket…

[@JonathasJunior]

Why not polish the inside ?

[@goldenultra]

It has a special thin material that protects the insides. If you polish the insides you remove that film.

[@packerman1203]

Ok so what do i do if i dont want to rip it off of the housing

[@user-ik8fl2xr5t]

I'm curious to know if you found a solution

[@packerman1203]

@@user-ik8fl2xr5t i bought new headlight assemblys

[@tonyjaquez3595]

Man glad i found this video! I was about to open mine up and polish the inside.😂 can I send you sone pictures of these lights and you let me know if they're even worth saving?

[@unspokendesign]

This is a fantastic video! Really appreciate all these little helpful 'how-to's that you spend the time doing!

[@flyryde]

Happy you enjoy them 🙏 this one admittedly took me way too long to make.

[@margotfraser8393]

the video won’t play 2:10 PST

[@lowhertzhighspl]

How to remove WD-40 from inside of projector lens WITHOUT dismantling headlight assembly? Even possible? 6" extra large q-tips with microfiber towel? Any glass cleaner I can use? I was hoping this video was FINALLY a fix to cleaning the inside of my headlight projector glass without being able to touch it since I refuse to pull apart my headlight assemble from fear of not being able to properly seal them (2011 Ford Edge) I'm about to try using 6" extra large q-tips with a microfiber eye lenses cleaning towel. WHY? I had a difficult time installing new LED bulbs last year, I couldn't get them to twist back in due to too much metal on metal friction and a terrible angle so only my fingertips can reach the bulb, tight space, so I stupidly sprayed WD-40 inside, over spraying inside of the projector lens!!!! What's worse is, I had to repeat the process on the second headlight!! Good luck to me for removing the year old WD-40 without dismantling the assemblies. Tips/Suggestions will be appreciated, if they are worthwhile.

[@user-dk5tn6rr6d]

At 28 years old i was asked what i wanted for xmas didnt want any one to spend money so i sent them all the affilate links on here 🤣

[@flyryde]

Hahaha dude that’s awesome 👏

[@user-dk5tn6rr6d]

@@flyryde figured if they get me something might as well help zomeone eles too 😁

[@Sinerwray]

You deserve more subs :)

[@MostlyPeacefulCombatVet]

You should definitely do that and reach out to Adam's! Kustom 54 knows his business! That man always impresses me. Has tips and tricks for days. I still think Pavel knows some sort of lighting and paint voodooism/magic 😂 A couple of these high end builders do. You still know electronic wizardry that I can't seem to master. Despite the master classes. 🤔 Lights looking way better my man! Nice job 🤘

[@flyryde]

He came over for beers one time and we just couldn’t stop talking in the workshop. Pretty sure the wives are happier with us apart, lmao.

[@djboom3024]

Hmmmmm maybe this is why my GTR headlights are bright and shiny 😎

[@flyryde]

Haha, there’s nothing better than perfect 👌

[@FenderRealm]

I had to polish the inside of mine as they were hazed on the inside

[@flyryde]

Some guys use Easy Off oven cleaner to completely melt out that anti fog layer that gets hazy.

[@K-Riz314]

Did it turn out good in the long run?

[@notahmad1593]

yh how is it working for you

[@stephenm5000]

Cleaning the lens surface is not the issue, getting at it when the only 'hole' is when you take the bulb out, that's the problem LOL Was looking for some nice custom made tool like an over extended old fashioned flexible 'pipe cleaner', but no one has seemed to have invented one yet!

[@JaquesTone-ph8jk]

Lasted about 13 seconds before I turned it off. I don’t need to hear you yammering about how cool you are. I’ll figure it out myself.

[@MostlyPeacefulCombatVet]

On another note, I really wish I could find some nice new lights for 08-10 ford superduty. Both of my custom builds (on my 08 and on my 2010) have aged so bad I'll never get them perfect again. New Motorcraft lights are priced atrocious. Never seen depo make them. Which sucks. I love the depo lights. My titan and Xterra lights were both depot. Super awesome for the cost! Sooooo if anyone knows who makes a set with good quality aftermarket set of lights for the whopping 2 years they made this body style truck(oem style. Without the extra garbage projectors and weird LED placement)...... Holler at this guy! Or if you know someone who has a stockpile of like new condition take offs without charging my 2nd born. I'll take em. Maybe you wanna help a brother out. I would love to upgrade to a dual projector setup too. I think I can squeeze a morimoto 5.0 or g5r in the factory turn/running location. Thanks for the content Chris! Always a pleasure watching you show yourself being human. 👍 Y'all take care

[@flyryde]

I’ll keep an eye out for you dude 👍

[@BIG45ROB]

Was wondering if this was coming after watching the wrx video :p clearly those lens were distorted prior to you guys doing the lights that's dope 👌👌

[@flyryde]

No the marks were 100% my fault. They happened because I didn’t properly wrap the lenses up and kept them open to the dust in the air for so long.

[@BIG45ROB]

@@flyryde I hear you, and honestly I've debated this issue for a long time, I love old lights but clearly if the lens is to far gone not much you can do, have you ever tried possibly, like a ceramic pro coating? I've never opened headlights yet just wondering if that might get rid of the micro scratches?

[@flyryde]

Yeah some dudes shoot clear and all sorts of stuff. I don’t know, I’m just not interested in burning time. If “fixing them” will cost me 5-10 hours of my time, that’s A LOT more expensive than temporarily tying up 2-300 bucks on a brand new set of lenses. I’ll get that money back plus some, where the dude that blows a ton of time and effort isn’t getting anything back besides some potential crying from his customer that paid for perfect and got, at best, nearly perfect 😉

[@dannydee9919]

For the second method, placing the lens om a fixture would give a better chance of not accidentally damaging the inside

[@randolphcirilo4800]

Depot or any other aftermarket lights are inferior to OEM.. Id do what I could to restore the OEM lights..

[@flyryde]

I wouldn’t say inferior. One car that’s plagued massively by bad, yellowed old lenses is the IS250/350. Screw buying new lights at 2k+ when a set of DEPO light lenses can be swapped into the factory Xenon units and make them look brand new. Just depends on how much you care about that extra 1600+ dollars whether you want OEM or not 🤔

[@randolphcirilo4800]

@@flyryde .. Is there anything that can be done to prevent that yellowing fogging crap?

[@flyryde]

Randolph Cirilo probably, but overall I’m not the car care guy to ask. I treat my cars like crap lol. I’m sure some dude out there waxes his lights daily, sings sweet lullaby’s when he locks her up tight in the garage for the night, and then dreams of detailing the undercarriage... 🤦‍♂️ For normal humans, I think it just boils down to the environment where you live, and if it’s garage kept it not.

[@kianward5999]

smashing vid bro i enjoyed every bit of it great worm my man

[@gunsnjesus6107]

Nice shirt got the same one !

[@voodoossj]

Good thing I procrastinate, because I was going to polish the inside of the only pair of headlights I have xD

[@Iteachfitness]

That was a lot of work jeeez

[@deadman92AL]

COME HAI FATTO PROVARLO?

[@JoeSalmi]

Never had that happen to me

[@burntmoose9292]

Can I just send you my headlights it’s got some sort of powder inside the lens

[@flyryde]

You cannot 😬 Have you joined the discord group? There’s a few guys in there that’d be able to help. discord.gg/fdUcry7Tvr

[@5353iceman]

$3000 lights, I would use new oem lens.

[@ItzMeLuiz.]

I want to send you my headlights so you can customize them :(

[@flyryde]

What kind of lights mr frowny face :(

[@ItzMeLuiz.]

FlyRyde 2006 350z stock headlights :)

[@flyryde]

I still haven’t made an Ironman mod video. We could do that 🤔

[@ItzMeLuiz.]

FlyRyde yes please! Thank you :)

[@BulkyHealthyCat]

Camry is different harder breed

[@EricVirtueable]

There's nothing cooler than doing the things we aren't supposed to do but want to do and pulling it off.

[@christiannieves4380]

God damn. Saw this after the fact of cleaning water streaks in the cover. Fml.

[@bermudavibe1714]

Yeah I fucked up and ruined my lens on the inside.

[@rBear1989]

Some alcohol and cotton wool do much better )))

[@flyryde]

That’s a perfect way to destroy your anti fog layer. Have fun with that 👍

[@rBear1989]

@@flyryde Not a single problem for 3 year )

[@MarineKustomz]

Have a video on it?

[@notahmad1593]

@@rBear1989 bro have you noticed any problems yet ?