3000gt VR-4 VS CBR 600RR

97 VR-4- DR650 turbo's, ARC-2, 750cc injectors, W/M +E50, 20 psi.
CBR- Jardine exhaust, ????

[@lonniemoore5616]

Race me now and I would smoke you with that bike lol if only I didn’t wreck it😭🔫 this it the Hampton guy by the way!

[@misanthropist111]

That was a fun night though

[@joeysmokez8423]

hey do u remember the settings for your tune with the arc-2? Im running 19ts w/ 680cc pte injectors and i need a good tune thanks

[@misanthropist111]

I wish it where that simple....every car is different and since im running bigger injectors, E85 mix, and injecting W/M my tune probably wouldnt even get your car to start much less run properly.

[@joeysmokez8423]

Gotcha, My friend is selling a set of rc750cc injectors, Do you think those are too big for my 19ts with arc2 ??

[@joeysmokez8423]

for pump 91 or 93

[@JohnDoe-bg2xt]

Hey i am running arc2 w/ 82mm mas and was wondering if i can run 1000cc injectors and e85 with walbro 450 hotwired. Id like to turn up the boost to 24 psi without having to worry about blowing up the motor from the advance ignition timing from the arc2. What was the most psi you pushed the 650s with your arc2 on e50 or e85? I have billet 19ts

[@JohnDoe-bg2xt]

Not planning to run W/M injection

[@misanthropist111]

John Doe cant really say for sure but i think 1000cc is out of range for the arc2. im using a "J&S safegaurd" for timing control.

[@misanthropist111]

John Doe 24 psi is the most ive done for any period of time do to wastegate issues.

[@JohnDoe-bg2xt]

Any knock at 24psi on e85?

[@JohnDoe-bg2xt]

Did you break 500whp with this setup? that is my goal with 19ts e85 and arc2.

[@misanthropist111]

first race bike missed second

[@JohnDoe-bg2xt]

If a GT can keep up with a bike that thing must be fast!! 😄 How many psi?

[@misanthropist111]

20

[@JohnDoe-bg2xt]

Pretty impressive,, you should be pushing around 500awhp then,, also You'd have to hit 0-60 in early 4 sec high 3 sec to out launch him awd ftw lol

[@misanthropist111]

+Joey Rotella ya, i need to get it dyno'd. these turbos usually make around 650 crank hp at 24-26psi and good tune so im prolly not too far from 500

[@JohnDoe-bg2xt]

+misanthropist111 Is your engine forged?

[@misanthropist111]

+Joey Rotella just the crank

[@JohnDoe-bg2xt]

how did u set up that 2 step ?

[@misanthropist111]

dont have a 2 step, wish i did though....

[@JohnDoe-bg2xt]

Hey are you on the 3sgto group on Facebook?

[@misanthropist111]

+John Doe no