3000w diy ebike review 72v it's fast!!!

This is a 3000w ebike kit on 72v 20ah battery I built for a customer

[@lionelhowell4972]

Bro start including your price ranges for your builds, and services. You will get a lot more responses,and could get OVERWHELMED with business.

[@DrewJersey2024]

I was thinking the exact same thing. If he was to have said a range…& that range jumped at me as within MY price range…he just heave had another sale.. ( thank god he didn’t cause I do not need yet another bike/Ebike in my house 😝)

[@Ooohh-v3i]

Man if you view it Like it push it PLEASE this is a MASTER BUILDER!!!

[@AlexAkanike]

Please can able to build with my eAhora e-bike?

[@dewayneshaw2285]

Yes he is

[@redline6871]

You convinced me to build my own. I bought a ebike that’s ready to go but I’m stripping it of everything and building it back up. I really like the frame of the retrospec valen rev+ got it for a good deal through my work. Think it’s going to be either a 3000w or 5000w not sure I’m a bigger guy I really just want good range for food delivery

[@tylerstevens8825]

Very big difference with a 3k to a 5k just saying as I have a 3k I built. Trust me work your way up 55 is aplenty and 72v you have that torg

[@tylerstevens8825]

Go with 3k first please then upgrade you working with a 72v.. a sal or far drive your going in for a treat lmao stay with 3k trust

[@RobertPetrucha]

Some advice as a 220lb guy riding a DIY 4kw ebike: Your range drops drastically with speed, wind resistance burns most of your power. But its fun to go fast... My battery is 72v 12.8ah. I built it in a "DP9" battery case, the largest "normal" looking 18650 case I could find. I've got a KT 60a controller that will pull over 4kw peak but I keep it limited to 2kw on the throttle and I usually run 750w on the pedal assist. Top speed 60km/h but I usually keep it around 40-50km/h. I haven't range tested it exactly, but my guess is that with my riding style where I mix the pedal assist and throttle however I feel it gives me about an hour of riding time before I need to recharge. I can tell you for sure that if I was doing food delivery I'd want it to last longer. It lasts much longer than that if I don't touch the throttle, just use 750w for going uphill, and then drop the PAS level even lower when I'm going flat or downhill. Riding like that I could probably double my range or more. Bottom line if I were doing food delivery and I wanted to be out for hours, I'd probably double my battery size or carry a second battery, and I wouldn't want to ride too fast. As for the fun factor, It's pretty good, but I often wish I had a just a bit more torque just for taking off from a stop. A controller with higher phase amps would probably fix that.

[@CWParks]

mad props and much respect for your channel and your continued creation of diy ebikes & videos. I have been assembling and riding bicycle frame ebikes for 3 years. You have exceeded my capabilites and knowledge. I have turned to your videos as a source of information as some of my inferior equipment has expired and I needed data to move forward, upgrade, and improve my riding experience. Your passion & fabricating skills are top notch. When my NBPower controller(s) suicided themselves, I upgraded to Sabvoton. Thank you for your Sabvoton controller programming video. That information allowed me to program and ride. I will never purchase NBPower motors or controllers again. I have had 2 Sabvoton 7280. The first one operated for 9 months. The second one operated for only 51 miles. I am done with purchasing Sabvoton controllers even though I remain impressed with their performance compared to the NBPower controllers. I am waiting for a Fardriver ND72360 controller to arrive as well as a new 26 ah battery. Once again I will rely on one of your videos to get up and running. I use my bike for fun and for work. I am a sawyer who operates a chainsaw deep in the forest. I do not cut down trees. I am an ecologist. I cut down invasive plants in very remote areas where humans mostly do not go. I take a truck to the forest. A UTV gets me as far as the trails go. then its me, the saw, and the ebike off trail creeping where the wild things are. my ebike allows me to just about go anywhere that I could hike and increases my ability to range over a much greater area with much less chance of faftigue or heat exhaustion. I have put a great deal of effort into keeping everything on the bike and me as light as possible. I am 6' 175 lbs.(198 lbs with my chainsaw, water, etc in a special pack on my back) My bike is built on a 29" hardtail Trinx aluminum mountain bike frame with the same upgraded double crown front fork that I watched you put on one of your bikes. 4 piston hydraulic brakes with 160/180 rotors. Headlight, tail light, strobes, and turn signals added. My current motor is an MXUS 72 volt 3k turbo hub motor with a 20ah battery. Total weight = 73 lbs. Overall I have been impressed with the performance of my build except for the 2 NBPower hub motors, 2 NBPower controllers, and 2 Sabvoton controllers that could not remain functional. Heat was a problem until the addittion of Statorade and hub sinks from Grin Technologies. keeping the battery at or below 20 lbs limits my range per charge with my average being 21 miles per charge when at work and more like 15 miles per charge at play on the 20 ah battery. i feel like a kid at christmas waiting for the fardriver and 26 ah battery. May Peace & Blessings satrurate you and your house for your generosity of information, EBIKEGUY, words cannot express the amount of apprecation that i have for you. Sincerely 3RTHS3RVNTXX aka C.W. Parks ( from GA/SC living in Southern Iliinois near St. Louis, MO)

[@E-bikeguy]

Wow, I definitely appreciate it bro 🙏 💯

[@CWParks]

@@E-bikeguy 🙏

[@julirichmond3]

Where I live the ebikes are $1800-$15,000 Those bikes are brand name generally with torque sensor pedal assist Yet they won't go much more than 20mph.

[@curiousrelic]

Excellent build and review. 🎉

[@E-bikeguy]

Thank you 👊🏿 😊

[@KevinT1]

Great build and be aware that the Ozark trail bike’s bottom pedel sprocket will get lose no matter what and definitely upgrade the gear system, I have the bike and let’s say it’s a pain to keep the components on, besides that love the videos 💯

[@E-bikeguy]

Thank you 👊🏿 yes I plan to modify that bike as well

[@tylerhamilton-nz8qs]

Greetings from London. UK! i got a 3000w 72v just put a small windshield on it even though it looks kind of ridiculous. I got it off a kids toy motorbike and it's a perfect fit, and it sure cuts down on wind buffeting above 30mph!

[@carscoffee5263]

Finally a diy mountain ebike with adult size 27.5 or 29er tires... Not 20inchers on a moped frame...

[@PaulPaid]

Just curious. What don't you like about the 20s?

[@wrecktal_seepage]

Had a 17s 8p battery flame up on me! Pushed it's limits then had to immediately put it on a high amp charge.... I think it was the immediate charge that put it over the edge...

[@nicod974]

Go with vesc controllers, like trampa, flipsky or makerbase... You won't regret it. They are more suited to ebikes. Mqcon, Kelly and fardrivers more for bigger vehicles like emotos or ecars 3kW was the right power choice for that build.

[@E-bikeguy]

Ok ok I definitely want to look into the vesc controller

[@gamerdad8531]

I've got that throttle on my partner's cruiser could you please do a video on how to hook that throttle ignition combo up 🙏🏻

[@E-bikeguy]

Ok I will

[@djcue100]

Happy Father’s Day E-BikeGuy👊🏾 Love what you’re doing Sir! No e-bike, but I’m inspired by your knowledge and the overall good vibes happening on your channel💪🏾🎯💯

[@E-bikeguy]

Thank you so much 💯

[@DrewJersey2024]

Just started watching this video, so haven’t seen her move yet…but gotta say man, that IS one sexy as custom build for sure 🤘🤑

[@dawnapm]

I NEED a riser, I see! Wonder how it'd look on my seeker 24? I like the idea of sitting up a Lil straighter. That's a very nice bike. Are most bikes equipped with the "e-brake" feature?

[@E-bikeguy]

No, you have to program the ebrake function to be active

[@rufusirvin5279]

Do you put Statorade in your direct drive motors for better cooling? Well worth it.

[@E-bikeguy]

Not really because the motor is not working that hard fir it to get hot

[@ruflasto1]

Another winner. My Brother.💯👍🏾👊🏾🤛🏾

[@E-bikeguy]

💯👊🏿👊🏿👊🏿

[@dainadoshand2912]

Hey e-bike man been watching all your videos and am very intrigued by your bike builds and all the work you put in. What are you starting them off at I would like to by one?

[@E-bikeguy]

Ok email me at [e-mail]

[@marlonole7732]

You did it again. 👍🏾👍🏾👍🏾

[@sammybrown4680]

Great build. Bike looks aggressive. Keep it up.

[@E-bikeguy]

Thank you 👊🏿

[@kevinduprey9326]

Some of those dual motor pre built bikes are hard to beat at $1000 pushing 35mph hill eater... The only downside is heavy front end which would drive me crazy.... I like your set up 👍

[@BrentJosephSpink]

Amazing build!

[@josephpuchel6497]

Hey just subscribed my friend. Wow Very nice build. Quick and nimble. I would like to turn my mountain bike into this.

[@E-bikeguy]

@josephpuchel6497 thank you! If you need any help just let me know

[@roygarcia8145]

Nice review, awesome build!!

[@jb.inspirational1529]

Another great build from the E-bikeguy keep up the good work man love the content!!

[@E-bikeguy]

Thank you very much 💯

[@younqzoe]

What a good hydraulic break for high speeds

[@E-bikeguy]

Zeroing xt or deeps hydraulic brakes on aliexpress

[@MindOverdose]

Does 1000watts 48volt give 30mph ?

[@E-bikeguy]

Yes, with right parts you can see 35mph

[@slimdunkin117]

It’ll just take longer to get to 30

[@sameerjunaid1]

Love it as always excellent build.

[@E-bikeguy]

Thanks brother 🙏

[@ShouldaWaved]

I want to put a motor on my redline monocog 29er, needs a new crank though, bet it would make a nice steel beast of a rig, its got sma big triangle too, its a single speed bike

[@quintonhudson6490]

Nice build. Keep doing your thing bro

[@TechyRodsWire]

Best e-bike channel on KZbin!!! Dayumm didn’t know you was 6”7 wow!!! Much luv bro I need a fat man e-bike diy build that can carry weight and get up to 50mph

[@julirichmond3]

50amps Regen is a lot of amps. Think about the batteries and heat. I have my Regen on 18amps. I also set my Regen to start at 100rpm's The more amps on Regen can make the batteries hot. While discharging high current Think about chargers You wouldn't charge more than 20 amp fast charger. That's my thinking. If I go above that the bike slows down to fast for my liking I agree that the riders weight affects the settings for Regen. That's a rad build. Nice and simple ebike. It should be reliable

[@E-bikeguy]

Thank you yes I had it at 20a and can't even feel it but at 50a it feels almost like my bike and with a 20ah battery no need to charge it over 8amps

[@NunyaBusiness251]

Dude is badass!

[@WyomingRider]

Great job on the bike build!

[@E-bikeguy]

Thank you so much 💯

[@leftjab6187]

That is a cool bike

[@Cactuspractice12]

Looks great. Would love to see a parts last man, including the amazon bike if you can 🙏

[@E-bikeguy]

Ok I'll put it up on in the description today

[@Cactuspractice12]

@@E-bikeguy awesome man, thank you 🙏

[@offgridlivingstlucia8865]

Hey bro nice bike the sabvoton controller is very good I buy 45amp sabvoton it works better than the nbpower 45 amp controller

[@E-bikeguy]

Oh yes, I agree 👍 💯 thank you

[@terrencescott3418]

You should have a business for custome bikes, call it E-Drive Motor Customes, keep doing yo Thang bigg Dogg

[@E-bikeguy]

I do it's called ebikeguy performance llc custom ebike

[@BrentJosephSpink]

Are there any weather boxes that could be placed around the speed controller that wouldn't compromise natural air cooling? Puddles are terrible here in Washington. 🤟

[@E-bikeguy]

I know exactly what you mean

[@EUC_DeathRay]

I’m mounting an r/c fan on my controller to keep it cool. You might be about to rig something with a case.

[@je7647]

if thats a qs205 3000w motor they can go very hard, esp after hubsinks and statorade

[@E-bikeguy]

It's nb power motor

[@je7647]

@@E-bikeguy oh okay they arent the best but if you put on hubsinks and statorade you can run about 1.70 times the KW and generate the same heat from motor. when I say they arent the best, you dont really need or want much power with a bike setup like that

[@charlesdee63]

Hey there ebikeguy, love your build. Where are you located? I'd like to have you build me one. Seriously

[@davidcrowson4745]

Cool bike

[@cookierl7522]

how much do you charge for a 72v 20ah custom triangle battery? (just a price range) might consider getting one here

[@E-bikeguy]

Give me 900 fir a 72v 20ah battery 220amps

[@TestingEverythingElectri-xt9ov]

Whats the maximum top speed of this kit as it is?, and a very nice build you have done.

[@E-bikeguy]

I'll see today

[@TestingEverythingElectri-xt9ov]

@@E-bikeguy Big thanks dude.

[@BGIGAMERS]

Do you know how to purchase an e bike off of Alibaba? I live in Barbados and want to start selling affordable e-bikes on my island starting from 500w motors to 1000w motors.

[@E-bikeguy]

Yes you can message the seller and you can make some deals as well

[@lionelhowell4972]

Alibaba is always looking for sellers in all countries to help sell their products.

[@BGIGAMERS]

@@lionelhowell4972 how does that work?

[@dawnapm]

Is the seeker 24 a full throttle or half? I don't know the difference lol. Don't even know my own bike lol

[@E-bikeguy]

It's half but I put a full twist on mine

[@dawnapm]

@E-bikeguy it's neet to see all the different ways that we can make our bikes our OWN! Custom, in a sense. I truly appreciate your channel. I've learned SO much. One more question. I'm kinda short legged, and with my seat down all the way, I feel like my knees are coming up way too high when I'm peddling. Would it help if I changed the pedal arm to a shorter length? It's got the 8 inch/170mm on it now. When I put the seat up to where I can pedal comfortably, I can't hardly touch the ground when I come to a stop. That's why I was wondering.

[@AlexAkanike]

Please can you build it with my eAhora Romeo bike

[@E-bikeguy]

I'll have to see the frame

[@AlexAkanike]

Where can I send you a picture

[@E-bikeguy]

@AlexAkanike [e-mail]

[@f1dog]

How do I contact you about building a bike?

[@E-bikeguy]

Email me at [e-mail]

[@f1dog]

@@E-bikeguy Thanks

[@andrewford9974]

P42 batteries don't you mean 21 amp hour or 16?

[@E-bikeguy]

It 21ah but I said 20ah because most people understand 20ah

[@germanycistrunk9323]

Hey bud Im new here. I just got a fat tire ebike I need it to go really fast. Hit me up

[@E-bikeguy]

Email me at [e-mail]

[@IMBruceECLECTIC]

Great tune.....less dangerous for less skilled rider.

[@E-bikeguy]

I agree 👍 💯 it has friendly power not too slow and not too fast

[@Calthecool]

Your regen works at 82v? Mine only kicks in at like 75v. Sabvoton 72100.

[@E-bikeguy]

Yes it works at 83v

[@IMBruceECLECTIC]

Skills! 💪🦵🚴‍♂️

[@SanchoRAMZAM]

Luv the video I have a question I got a luckeep x1 ebike recently n it’s 750 1400 watt motor 48v 15ah battery now it does 30 on straights always wich great but on hills is drop speed a lot I was think of a conversion kit 3000 watt motor what kind of battery u recommend n kit for the type of ebike hopefully I can find someone locally that can do the work lol any advice would be awesome n appreciated

[@RSF650John]

Hay love the channel! How can I get in contact with you so I can have you build me a 72v 35ah battery

[@E-bikeguy]

Email me at [e-mail]

[@powchainsamaniego6744]

3000watt hub motor It's have good enough power

[@E-bikeguy]

I believe more than enough 💯💯💯

[@powchainsamaniego6744]

@@E-bikeguy yup

[@DrewJersey2024]

She is friggin CLEEEEAN man..🫣😍🫣

[@E-bikeguy]

Thank you!!

[@jamesgreen1337]

How much for a build like thisb

[@E-bikeguy]

It varies

[@ShouldaWaved]

Are we ever going to have ebikes that we cam turn our leg muscle human generated energy output into stored energy in the battery, annoying that we dont have this this day in age

[@N9Breaker]

Where can I go to find the parts list to build something like this?

[@E-bikeguy]

Everything on Amazon I'll put up a link

[@ColinMason-vb7hq]

Ebike guy what do you think about flipsky 75200 controllers

[@E-bikeguy]

I don't know really but definitely want to get my hands on one

[@IMBruceECLECTIC]

DIY...nice...💪🦵🔩🔧🪛⚙️

[@jashuasmith9361]

Where did you get that handle bar stem from? Dont think I’ve seen a stem like that.

[@E-bikeguy]

It's on Amazon do you want link?

[@jashuasmith9361]

@@E-bikeguy Yup. 👍

[@jashuasmith9361]

I’m wrestling with my qs273, starting to think I’ve should gave gone for the qs205. The build is 15kw. Being too impulsive and not thinking twice can be too expensive. Feel like I have to build a completely new rear fork.

[@gristgamer0015]

Also I don’t have pedal assist, how would I get the bike after all together to be safer and not do wheelies lol thank you

[@roblucas9599]

sup bro

[@markcailceta2661]

Ello mate I'm from the UK and the police are clamping down on ebikes and speed of them , I have a 3000k 72v 80amp controller and I was wondering is there any chance I could basically flick a switch to decrease the speed of it to 15mph so they won't take it of me because I'm currently running it 56mph

[@ArcherInTraining2]

Hey man Question. Is it possible to make an E bike with like $450 if you already have a bike?

[@E-bikeguy]

Well if you good at 28mph then it's possible

[@IMBruceECLECTIC]

100% hydraulic brakes....

[@geraldcoonsis6852]

Nice build!

[@MarvinHolland-k5b]

Can you do a build like this on a Raddy E-trail

[@E-bikeguy]

@@MarvinHolland-k5b I can be done but limited space

[@bigvik44]

What triangle bag did you use for this build? Excellent build.

[@E-bikeguy]

Thank you 👊🏿 my boy at Boss custom battery bags and seats made it

[@bigvik44]

@@E-bikeguyhow can I get in contact with him? Thanks again

[@dailylife3975]

I have a question I just did that shunt mod on my new victrip Titan 750watt that I asked you about a while ago does it make it unreliable because I ride really far to work

[@E-bikeguy]

Not really. I shunt mod most of my bikes still reliable

[@marvinlewis1879]

Hey there, Ebike Guy, Is there a company that custom build controllers or replicate yours to a higher amp?

[@Tiek2raw24]

How much it cost from ground up.

[@E-bikeguy]

It varies but I'll say 1,800

[@MarvstubeSoontv]

Nice looking bike fr , where did you get the pouch looking black bag thing that on the frame of the bike where some battery’s usually are

[@E-bikeguy]

My boy at Boss custom battery bags and seats made it

[@MarvstubeSoontv]

@@E-bikeguy dope ! Just came across your videos for the first time and recently got a bike about 2 weeks ago and I like my joint a lot but I would def consider supporting your business in the future and but one from you when the time came . What’s the price range of your bikes range from like what’s a ball figure I can expect to spend

[@E-bikeguy]

@@MarvstubeSoontv about 2,800 I can make one like this one

[@MarvstubeSoontv]

@@E-bikeguybet! would that include 20 inch fat tire wheels

[@E-bikeguy]

@marvjackson2347 you want 20in fat tire bike?

[@gristgamer0015]

Could you possibly help me out. I’m building the same setup except with a brushless motor and not one in the back wheel. It’s going on a occ chopper bike I’ve tried looking up the some of the wires on my controller bc I bought it on Amazon and some are just marked weird like one connecter says (back off) as a label and also says outage power/ switch and a couple other I don’t understand

[@Electrifiedwheelz]

how many amps does that controller make

[@kmodkese]

I'm interested in one of your batteries. How much is your 20ah 60v battery?

[@E-bikeguy]

@@kmodkese I can do one for 900

[@Alannababy2014]

Hello ebikeguy I see you use curcuit breakers on you builds, ive also ordered one for my bike I'm not sure on the wiring for it, does the circuit breaker connect to the battery possitive then to the load possitive?

[@E-bikeguy]

Yes that is correct

[@Alannababy2014]

@@E-bikeguy thanks so it connects only to possitive line is that correct? Also keep up the good work you have progressed alot over last year 👏

[@charleshowell6442]

What top speed did you get?????

[@E-bikeguy]

I don't know but I will do one today

[@gristgamer0015]

Also what would be recommended battery

[@E-bikeguy]

@@gristgamer0015 that depends on the power and fitment

[@ChrissMcAllister]

Can you help me bro am in UK need a bit of your knowledge plz

[@E-bikeguy]

@@ChrissMcAllister email me at [e-mail]

[@BrianReed-vl6tm]

what do you do for a living

[@E-bikeguy]

Lawn care

[@BrianReed-vl6tm]

ok cool

[@debohannan4315]

Is it possible to set the e brake through the key lock when you leave the bike that way it would be super hard for someone to hop on it and steal it

[@E-bikeguy]

Not really just have the alarm set it and it's very loud and will lock the wheel

[@debohannan4315]

Great then it can be done , that’s a good deal even if you have a lock an chain

[@Sanesaint1]

How fast is it

[@kmodkese]

What is the top speed on a bike like this?

[@E-bikeguy]

@@kmodkese 60mph

[@dangibbard7638]

Hey bro does the bac have the same config as a surron controller I have a 72v 70 amp battery but thinking of using a surron controller

[@E-bikeguy]

Far as mounting goes I believe you have to get e adapter plate for it but for tuning is completely different

[@dangibbard7638]

@@E-bikeguy would it still work with a qs273 motor if I had a bac and a 72v battery?

[@E-bikeguy]

@dangibbard7638 yes for sure

[@dangibbard7638]

@@E-bikeguy what about a 72v surron battery would that work too?

[@E-bikeguy]

@@dangibbard7638 might have to bypass the bms

[@markcailceta2661]

Where do you get your battery from

[@E-bikeguy]

@@markcailceta2661 i make them myself the cells from 18650 battery store.com

[@davym5466]

Is that a 135mm drop out motor or 150mm

[@E-bikeguy]

It's 135mm

[@randallhack4477]

How much did this build cost?

[@E-bikeguy]

2,800

[@deridionentertainment]

nice

[@EddieED711]

What amp is the bms on this battery, 60a or 80a?

[@E-bikeguy]

@@EddieED711 it's no bms on this bike

[@EddieED711]

@@E-bikeguy So if I get a 72v 20ah battery I can run a 3000w hub and get speeds of 60 mph? I want to upgrade my 1500w heybike cityscape.

[@E-bikeguy]

@EddieED711 yes but need a good battery to do them speeds

[@EddieED711]

@@E-bikeguy will a 72v 20ah 80a bms battery get 60mph with an 80-amp controller?

[@E-bikeguy]

@EddieED711 with the right setup, it will

[@Sunny-dg9ss]

Comments