3080 EVGA XC3 Ultra Re-Pad Temps from 110c - 76c!

My 3080 was getting 81mh because it was thermal throttling, when I checked the temps core was at 44c and mem was at 110c. So I did some research and decided to do it for the first time. Temps went from 110c to 76c. All items used are in the video. Just uploading this to hopefully help someone in the future, since it was hard for me to find all the details. Enjoy!

[@exoticsoulclan9555]

If you remember me I’m the kid who would always begged you to let me play with you I miss you hope you are doing good please start streaming again

[@dallasangler]

Nice work, I am heading to Micro Center now to stock up for "tonight's project", thank you for guide. Your technique and tools look so professional that I hope you don't mind a small critique. Wear gloves. That's it, just wear gloves. Not only to prevent recontamination of a your freshly cleaned electronics, but also because it makes clean up a breeze. I use one of my used gloves, inside out, as a small trash bag. Thermal compound and plastic trash cans don't play nice with one another. Peace

[@BUFFDgaming]

I hope I can help some people years later..... the xc3 is built for smaller cases.... also the fan curve is all wrong.... you can legit just reclock the fan curve and fix the problem.. yes im sure the pads do help ..

[@Tonymiamontana]

Bro I was change the pads and a fan on a evga 3080 ftw3 now it gives me a code 43 gpuz will read everything except clock and memory values. Fans spin and it turns on. Any ideas what could be wrong

[@terabitdefiance8022]

Hey! im looking to go back from liquid cooling to air and cant find concrete numbers for the pad thicknesses. This video seems to line up with comments from other videos about 1,2 and 3mm pads. i did notice that you mentioned something about forgetting pads in certain spots. Could you do some imgur links to specifically where you forgot with what mm was used in that location using the video footage here? i dont really know where you forgot to add anything. Thanks! Theres just not any videos that fully say "Here is Xmm" "Next one with Xmm".

[@jaidan0_018]

Notification gang

[@de-todo-un-poco-argentina]

hola no se debe de tocar los pad termios en la superfique que apoya en las memorias o en el disipador con los dedos porque pierden rendimientos.

[@lakshaykhanna285]

what size thermal pads did you used on it.

[@viper809]

I believe I wrote everything I used

[@jaidan0_018]

110 ?!?! Boi if i was you i’d cook on it

[@john3DDesigner]

Qual Thermal pads vc usou??

[@A.m-h3e]

what size is the screwdriver you used for the one that holds the gpu cooler 1.:17

[@viper809]

I just used which ever one I had. But the 4 screws that hold the gpu core did kinda get eaten up. Well one screw. From now on I will make sure I use the right size. Sorry I don’t have the exact size.

[@jaidan0_018]

Thx for cleaning my future gpu viper🤣🤣🤣

[@viper809]

no problem i got chu!

[@w-keyedit8207]

Yo im clapz_uniqe idk if u still remember me lmao, i whas the kid always begging for the minty pickaxe just cheking up on u how have u been? Ur kids wife and why u stopped streaming the 809 comunity always belived u would been at the top

[@icold666]

My GPU has stuck, i cant open to change t.paste, looks like glued... Is same modelo tô 3070

[@viper809]

Wiggle it side to side

[@user-ue4fg4ms9p]

One choke missed

[@viper809]

I reopened it after the video to fix a few other things lol.

[@Silas_Ctlr]

That takes to long