30X40 Shop Build and Cost Breakdown

[@douglasthompson3787]

Your framers are beast they did a excellent job in a short time

[@stayystoked]

Haha 100%!

[@robertnash2446]

I like the building.....I would if liked to see more overhang of the roofline soffet and fascia over the building....looks like you did a 12" inch overhang...I think the building would of been more protected and looked nicer with a 16"-20" overhang.

[@stayystoked]

Ya I get what you mean, although i'm not too terribly worried about the protection of the building because i'm going to add 12ft wide lean-to's on each side of the shop within the next year or two.

[@autowerkesexclusive]

Fantastic job man! really well done video.

[@stayystoked]

Thank you I appreciate it!

[@darganslayer]

Congrats on your shop, man. I’m building a 56x40 in Redmond right now

[@stayystoked]

@@darganslayer thank you, back at you

[@josephcole7645]

You got some good prices. I have some tree work done and not nearly as much as you and it was 5000. Concrete was also a lot higher. Nice job though and nice building. Congrats.

[@stayystoked]

Thanks for the comment, life is definitely getting pretty expensive nowadays! Every dollar counts.

[@gordon6029]

Thanks for that. It’s gonna hurt to get my shop in but I really need and dream of having my space.

[@stayystoked]

Glad you got something out of this. Nothing like having a nice shop for your work space!

[@alanswanson5642]

Smart putting the windows up high much more secure

[@stayystoked]

Thanks that was definitely my thought, and looks better too.

[@fredski53]

Looks like the door rollers are coming out of the track! Nice building!

[@stayystoked]

I did have to adjust a few things on the doors once they were installed, it’s been working great since!

[@PoolJourney]

Nice love the video i am about to have 27 yards poured for my build this week 4600.00 labor cost i am buying the 4k psi at 196.00 a yard with fiber.

[@stayystoked]

Solid numbers. Good luck on your future build.

[@PoolJourney]

@@stayystoked thanks so much.

[@pintopilot]

Very nice work. Great to see a build in the PNW get get a better idea about costs. I see your concrete work came in at just over $10/sqft. I'm in SW WA, and the bids I'm getting for an almost identical job are at $15 - $20/sqft ! Crazy !

[@joseph7105]

I think even $10/sqft is nuts for a something that is considered rough labour, even easier than framing. I got a quote on a pour a slab for a new 24x36 shop. Got quoted $12,000 for the concrete & labour These guys are on crack. I build high end kitchen cabinets and don't charge near that day-rate.

[@stayystoked]

That's wild. Hopefully you can find a way to get that price down a bit!

[@stayystoked]

Prices have definitely been climbing the past couple years! I thought my price was high when I originally got it!

[@larrymcgill5508]

Who did you order your snow from? We could sure use some down here in Florida right now. All kidding aside, I’m planning on a metal building in the not too distant future and your video widened my scope of what I need to plan for. Great YT vid. I guess the most important two things I picked up are: Know your limitations. And it’s good to have friends with skills. Thanks for sharing.🤙 God bless.

[@stayystoked]

Appreciate the comment! Theres definitely a lot that goes into it!

[@cgreen4life]

Hey, great video, thanks! Question, what was on top of the plywood and under the metal roof? I did metal roof on existing shingles and needed to put strapping down for the metal roof to breath. I'm building a 16x10 bunkie and would be easier if i didn't have to do the strapping. Thanks!

[@stayystoked]

@@cgreen4life thanks appreciate it! That was just a tyvek wrap for a weather barrier.

[@thomasbordi8726]

And people who have liked your video and watched it.😮😊

[@KA-cc9yw]

Nothing cheap these days !!!! But it is a must

[@stayystoked]

@@KA-cc9yw yup

[@user-gn1ic9ww8q]

ive been hearding so much about your famous baked mac n cheese that i had to try it out first hand... i wont crack another joke about your dimentia, i know u was wrong for what u did yrs ago..... how can i make it up. to u. dont worry about it its squashed now were starting over on a clean dish now...

[@jimmyjonesbg]

so they toe nailed the studs to the bottom plate ? why did they go that route?

[@dylangaran3293]

Toe nailing is a lot better

[@joelightle5875]

I just built a 30 x 40’ oversize four car garage and with footings and the pad it was 55 yards of concrete!

[@stayystoked]

Thats insane, how thick was the slab?

[@diegojines-us9pc]

would it be about right to add 30K to paid for your labor. just getting a cost of the bill?

[@stayystoked]

Yeah I would say that would be a pretty good guess for what a contractor would charge to do all of the labor that I did.

[@diegojines-us9pc]

@@stayystoked glad i work cheap.

[@stayystoked]

@@diegojines-us9pc exactly

[@karleck1119]

Mintski

[@stayystoked]

👍

[@user-gn1ic9ww8q]

im gonna be working on finding pat&lindsey a new house this week, i gotta start taking life for more then a grain of salt.... its time to get serious now..

[@JacobAHull-nx6rx]

Nice build. Why didn't you put the garage door glass closer to eye level to be able to look out of them?

[@randysmith9636]

It's possible he is using them to allow light in only. Don't want anyone looking in to see what you have.

[@stayystoked]

Main reaso would be looks. Didn't think it would look great with the windows on the bottom half of the doors. Their main purpose is to let more light in and for looks vs being able to look out.

[@stayystoked]

@@randysmith9636 mainly looks but yes that also

[@lonepinetransportation5500]

Hey I’m building a almost identical shop with the same size doors was wondering how you like those openers

[@stayystoked]

Once I got the faulty one replace I love them. Super quiet and fast opening and closing. Would recommend for sure

[@lonepinetransportation5500]

Awesome thanks. I’ll give them a try

[@recrdholdr]

Subscriber 1000!! :D

[@stayystoked]

Hell YEAH! Appreciate it

[@jakebredthauer5100]

Is this stick built better than a pole barn? You could do the additions with a pole barn and use a cantilever truss. The attachment to the building needs to be very strong so it does not get ripped off. I'm not sure how it is done but I think there should be a plate installed inside the wall and bolts that go all the way through.

[@stayystoked]

To be honest we never really looked fully at the option of building a pole barn based on the size of building and budget we were sticking with.

[@PoolJourney]

on that 15K for lumber and labor how much was either or (lumber or labor only). I like the way the walls were built seems that works will with scaffling vice having to rent something to stand those walls up.

[@stayystoked]

@@PoolJourney I wanna say the lumber was about $8500, and the framing was about $6500. But they gave us a really good deal on framing up the building because he’s one of my best friends.

[@PoolJourney]

@stayystoked OK good deal, so far I just had $8161 of lumber delivered for my 27 / 48 so we're real close in numbers with lumber and about the same with trusses.

[@verokaht6495]

What did you use for plans, how did you come up with the design?

[@stayystoked]

My friend, the main framer worked up the plans and design for us.

[@bradarsenault4930]

Those auto locks are prone to failure causing damage to the track. Apparently, they fail to unlock when the motor is engaged. My installer stopped using them because of that.

[@stayystoked]

@@bradarsenault4930 good to know! Thanks for the heads up 👍🏼

[@mr.tomraypaz6085]

Don’t forget the siding.

[@stayystoked]

Siding is going on soon

[@ritchieferguson1854]

I'm assuming you did 12x12 garage doors how much room do you have between garage door and sidewalls

[@stayystoked]

@@ritchieferguson1854 the doors are 12 wide by 14 tall. And the outside and middle columns are 2 feet wide.

[@DanielShaw-l3f]

Nice work . I'm a custom painter for cars and trucks.. I'll travel for a good job on a car or truck. Later

[@stayystoked]

@@DanielShaw-l3f nice, where are you located?

[@MrSrtman18]

How tall was this? Nice building for sure!

[@stayystoked]

@@MrSrtman18 the top of the walls are 14ft, in order to make the garage doors 12ft.

[@user-gn1ic9ww8q]

i cant be having them living in my basement much longer OHIO STATE waterproofing said theres cracks and leaks and hideous mold problems also which leads to black mold if breathed in can cause respiratory issues also....

[@chrisvolk106]

What is the sidewall height?

[@stayystoked]

16ft

[@user-gn1ic9ww8q]

after i thought about payton your my fav your much quiter then your bro is...... i went to willows houe the other day,my oh my her room looks like a royals granddaughters palace i mean shes got solid 24k gold lamps, they built a water slide through the pool rooms ruff and into her swimming pool, why does a 3 yr need a indoor/outdoor infinty edge pool anyways....

[@BPHwweez436]

Non operational windows or gonna use a ladder to open? This thing is huge gonna be nice you'll be able to shoot basketball inside of it looks like ? You can tell them two ol boys been working together for a while they smoked this thing out !

[@stayystoked]

Yeah the four windows on the side of the shop are non operational. The smaller 3x3 window on the back opens so we can vent in the summer if needed. Haha yep they've been framing together for a long time!

[@garrisonswartz3515]

What roof panels are those?

[@stayystoked]

Skyline ridge is the name of the style. 2”

[@travisandtracyjacobs6198]

Are u in Bend or Lapine?

[@stayystoked]

@@travisandtracyjacobs6198 La pine

[@user-gn1ic9ww8q]

if were living in reverse that means the LTs will be pissing me off tomorrow then

[@leeworsdell1410]

100 thousand in ontario canada .

[@stayystoked]

Don't doubt it.

[@bobturcotte]

Dam, I am in Ontario, would like garage built.

[@stayystoked]

@@bobturcotte It's a process, but well worth it.

[@user-gn1ic9ww8q]

u see how quiet it gets when kelsey starts her cycle, once u step across 82 though its a hole nother world out there then its like the man in the bubble movie when all these woman say sonny let me in the bubble with u , oh i cant my mom is feeling down again when she finds a better man ill let u in then...... lmfao, jr listen dave and busters is open now call your friends. fuck i dont wanna go to the mall again im tired of shopping

[@jkashif1]

This is a bargain price of $50 per sq feet build.

[@stayystoked]

@@jkashif1 pretty happy with it. But there’s been a lot of added costs with finishing electrical, insulation and siding since finishing the video.

[@user-gn1ic9ww8q]

so with the blink of a eye all gods serve aunts vanished or burnt up under a high powered microscope class. awwww come on, u mean to tell me that god works in mysterious ways like that. yes god is a very lazy man, but when u have god on your side all the nuns arent to far behins... they do call god the american badass himself for a reason. wow dude looks like a lady for real... ok lets put some pep in those steps and lets get back to the big apple nanas waiting for us she has dinner in the oven already some homeade baked mac n cheese witth breadcrumbs deep fried liver and onions this recipe has been handed down for generations now. wow nana id love to stay longer but i gotta get back to work if u need me ill be in my office on second floor why i renovate another room... ok sonny thanks for everything youve done for me i couldnt ask for a better son outlaw then yourself..... yes payton will stay with u before he flies back to LA nana... ok sweat dreams...

[@user-gn1ic9ww8q]

jr the yard looks like a pond cause some assholes put massive tarps underneath the dip to retain the water from seeping into the computer rooms thts why. no those are fake trees with fiberoptic roots in them, those trees havent grown a inch in 9 yrs jr. then cut the trees down then ashley cant see her neighbors windows with the trees in the yard...... oh no no jr put that chainsaw down thats kelseys chainsaw not yours.....