#312

Remember to subscribe !
This camera suddenly died, I thought I would have a poke around to see if I could fix it... I didn't dig too deeply, but the answer looked to be a "no".
Security Cameras: goo.gl/gQLupP
Measurement & Analysis Instruments: goo.gl/gPxTxT
Give this a Thumbs Up if you like it share the video with your friends, it helps to grow the channel.
To donate money to the channel please use one of the methods below, cheers !
Patreon: / thedefpom
PayPal Donations: www.paypal.com...
Test equipment appeal: • #84 Appeal For New or ... #ifixstuff #thedefpom #electronicsrepair
TheDefpom Merchandise: teespring.com/...
==========================================
Some Of My Electronics Tools (video and purchase links)
==========================================
Boonton
------
4220.
8210: defs.link/?u=e...
Fluke
------
8842A:
45: defs.link/?u=e...
343A: defs.link/?u=1...
5200A: defs.link/?u=a...
540B: defs.link/?u=0...
893A.
A90.
HP/Agilent/Keysight
------
4261A: defs.link/?u=0...
5005A.
5342A 18GHz: defs.link/?u=5...
6181B: defs.link/?u=b...
8012B: defs.link/?u=c...
8648B: defs.link/?u=d...
8901B: defs.link/?u=5...
DSOX1102G: defs.link/?u=a... defs.link/?u=1...
E3646A: defs.link/?u=1...
Marconi
------
2022D.
2955.
TF2103: defs.link/?u=6...
Rohde & Schwarz
------
SMY: defs.link/?u=9...
CMU200: defs.link/?u=8...
Polarad SPN: defs.link/?u=2...
Siglent
------
SDM3065X: defs.link/?u=1... defs.link/?u=1...
SDS2102 (hacked to 340MHz): defs.link/?u=1... defs.link/?u=1...
SPL-1008.
SDP1168X: defs.link/?u=1... defs.link/?u=1...
SDL1020X-E: defs.link/?u=a...
Other Equipment
------
KSGER T12 Soldering Iron: defs.link/?u=6... defs.link/?u=5c...
Quick 861DW: defs.link/?u=1... defs.link/?u=a...
S-993A: defs.link/?u=0... defs.link/?u=e...
EEVBlog BM235: defs.link/?u=1...
YR1030 Battery ESR: defs.link/?u=c...
Heathkit IT-12 Signal Tracer.
Racal Dana 1992: defs.link/?u=8...
Bird 43: defs.link/?u=4...
Sinadder 3: defs.link/?u=2...
Audio Control SA-3050A RTA: defs.link/?u=a...
Korad KA3305D: defs.link/?u=6...
PDVS2mini: defs.link/?u=8...
Valhalla 2703: defs.link/?u=0...
Feeltech FY6800: defs.link/?u=8... defs.link/?u=34...
Eakins Microscope: defs.link/?u=b... defs.link/?u=2...
Mustool G600: defs.link/?u=b... defs.link/?u=3...
Handheld Equipment
------
Uni-T UT210E: defs.link/?u=3... defs.link/?u=e...
DER DE-5000: defs.link/?u=0... defs.link/?u=1...
MK-328: defs.link/?u=0... defs.link/?u=7...
MESR-100: defs.link/?u=0... defs.link/?u=0...
ESR Meter: defs.link/?u=0...
HOPI: defs.link/?u=7...
PeakMeter PM6252: defs.link/?u=5...
HS1010: defs.link/?u=1...
Thermal Camera: defs.link/?u=2... defs.link/?u=4...

[@emptech]

Yesterday I had a complaint from a customer that their camera system was not working. One of the handy instruments I use is a Triplett Camview IP Pro+, allows me to power up many of the cameras and look at the outputs of the cameras, even IP cameras. I can also inject a test pattern into the DVR. I narrowed the problem to the analog ntsc camera, was getting power OK but no video output. I explained to the customer that hardly anybody actually repairs things anymore and that I would probably just get a new camera. But, I told her I'd take a look at the camera. In this case it is a SPECO analog camera. It had two circuit boards, the first took the 24VAC, converted it to 12VDC. What is most important, it has a transformer so that the 12 volts is isolated from the video ground. It is actually a switching power supply. The 24VAC goes through a full wave rectifier, is filtered by an electrolytic capacitor, then switched by some transistors where the signal goes into a tiny transformer. The output, now isolated, goes through more rectification and filtering, then on to the camera module. There were only three wires going to the actual camera pcb, common (gound), video, and 12 volts input. The 12 volts was only a couple volts. I used a bench power supply and momentary bypassed the power supply board, the camera woke up. Most of the components on the power supply board were SMD, but there were two electrolytics, the usual suspects. I don't normally shotgun a circuit, I try to go directly to the suspected bad component. With my B&K meter, I first checked the capacitance of the one at the first rectifier, the value was within spec and the ESR (very important) was a couple ohms. I then checked the filter cap on the output of the switcher that filters the 12 volts to the camera. The capacitance value was within spec, but the ESR was over 130 ohms. I replaced that cap and bingo, the camera was back to life. I didn't have a schematic, but understanding how switchers work certainly helped. BTW, I could see no physical damage anywhere, no bulging caps, nothing. Hope this helps someone. - Jim

[@allthegearnoidea6752]

I have a very similar camera module I made a night vision system by removing the IR filter. I bought a composite video transmitter and planned a making a wild life camera I could watch on my home TV. Well another unfinished project. I bought a flir thermal camera last year. Have to say not got much use out of it it’s easier to use a finger as my wife says. Nice video thanks for sharing. Regards Chris.

[@Youtube_free_always]

Goo job, congratulações!)!

[@rahulpatelgujratahmedabad3497]

Good tiching karte hai 👌👍

[@sal.m2A]

I've always wanted to replace the camera input with something like an HDMI input. Basically I want to pull apart a wyze cam and hook the HDMI output from my old dvr system and be able to view in the wyze app

[@boyanneykov3781]

Great video. My ptz cam have a mic problem. Always have a bad noise when rec video ot watch online.The cam works around 10 days. What u supose is a problem.

[@TheDefpom]

Sorry I don’t know, maybe interference from nearby mains cabling?

[@ajaytanwar9467]

Can I extend memory card slot by using 1meter 8 rainbow wire in ip camera's ? Will it works?

[@kilnprabu]

did you change the capacitor (hot part)did the camera work again?

[@TheDefpom]

I put it back in the correct polarity and it has been fine since.

[@cengizhanbakrc2753]

Can I get an image like a normal camera with ip camera video output cable.

[@shahidzaman4955]

Sir I have sq13 mini wifi camera but when I connect its wifi then it's video image is x-ray like i.e while image and sometimes it's image is normal good but suddenly it's video gets x-ray like image....sir how to fix it?

[@twopiecez5226]

Where did you put your multimeter to test that?

[@throttlebottle5906]

was that a "tubed" crystal on the other side? maybe it's bad and the clock speed of the chip going nuts-o in frequency. usually they just don't run at all, but i;ve seen the random odd device go insane speeds

[@throttlebottle5906]

oh wait!!!!, is this where I should point, laugh and yell "u suck" whilst pointing, instead of shooting possibly helpful ideas :)) ( I'm sure you'll get others doing just that)

[@TheDefpom]

I should of checked oscillators actually, that is a good point, as you saw I just had a quick stab at it in case it was something obvious.

[@zx8401ztv]

Hey a poke around is always interesting, put a condom on the probe though :-D I would check the number on that regulator, just so you know the voltage is right. The problem is some chips to get hot and thats normal. You could remove that chip for fun lol :-D.

[@throttlebottle5906]

what I seen out and about today, a condom on your probe likely wouldn't save you :)))