$33 DIY PS4 SCUF Mod! | Unboxing & Install | Extremerate Dawn 2.0 Kit |

[@zacklomax2433]

Dude your the G.O.A.T ive never opened one of my controllers and I switched from a strike pack to this absolutely cant thank you enough 🙏🏻🙏🏻

[@Dubb1429]

Thank you… mine will be here next week and I wanted to find a video on how to set it up before hand… not only helpful but I don’t even have mine yet and I watched the video anyway because it was entertaining… keep it up.. you help me and I’m sure many others👍🏽

[@lucasdemong5818]

Can you please do a review of the Extremerate Clicky Hair Trigger Kit?? Trying to find out more about reliability, etc. Love the vids!!

[@guido1979]

I think I love you man. On the “official instructions” aren’t all things you said. Big thanks to you 🙏

[@TylerSmith-sd2oc]

To open the controller easier pop up both sides slightly amd grip both sides and use your thumbs to push both sides up. Otherwise youll keep reclipping the controller on one side

[@OkiDingo]

I just got my kit in and made my install video. What an improvement over the first version. However I still don't like the touch pad for remapping as I like to place my controller on my leg, which puts it into remap mode. Great review.

[@CraigsChannel]

Cut the wire for the remap touch off and just use it manually

[@OkiDingo]

Craig's Channel - correct. I did this one my v1 and this one.

[@CraigsChannel]

@@OkiDingo Me to, I'm really not a fan of the touch pad at all, far to easy to press. I'm currently waiting on them digital trigger mod kit to be sent out from eXtremerate, cant wait to try that out 😁

[@OkiDingo]

Craig's Channel - ahhhh, the “clicky” trigger mod, looks neat. I’m waiting for the “Decade” PS4 tournament controller. eXtremeRate is making some really nice stuff. I have reviewed a couple of their items and have a bunch more to go.

[@CraigsChannel]

@@OkiDingo Yeah that's it dude the clicky 👍should have the kit in the next few days, really excited to try it on CoD, see what the big fuss is about digital triggers lol. Somebody mentioned a new controller they're making is this the one you're talking about? What's due in September?

[@skatesacku]

i kept accidently putting my finger on the remap sensor so i just cut it off and you can just hold L1+R1+downDpad+X and it works to remap without being able to hit the sensor

[@lamNoJedi]

Do you think it would've been easier to peel the LED tape off first then stick it in place before u put the screw in on the board?

[@movvs33]

Where can i get the programable controller. I need it pls.

[@Jesus_Wojak]

I hope that this kit is kompatible with their mouseklick system.

[@lordofnecromancy6302]

Got it all installed works good on the PS home page, but in games the device won't respond. Tried mw2 and rdr2 both won't let you use this device to play. Just like the cronus zen is.

[@REJR90]

Can i install the clicky whole kit as well and this to have both

[@dabzpaintball4478]

Thank u !

[@greypant7204]

Hi, in the back of the co controller bulky since there is another element like this plate? Or its the same feeling but has extra holes in it for buttons?

[@WishaninjaWood]

Is Zombies Ate My Neighbors his fav game? Its always playing in background.

[@TechSavvyBuyer]

One of my fav old school games

[@rivingmizzenmast]

I was wondering if when you don't have the buttons on the back remapped to a regular button, if they still send out a single. For example, if there is a game that you can set moves to certain buttons, will those buttons be registered as their own new buttons, or will they only work in game if they have been remapped to other buttons on the controller?

[@senn1864]

I am pretty sure they dont i own the dawn kit 1.0 and i love it sure recomend dawn kit 2.0

[@kodilewis3849]

I modded my xbox one controller and put the L3 & R3 on the back. solid mod for ppl who keep hitting the turbo or the horn in gta. cost me 43 cents, Canadian!

[@HAli7]

Do u mean LS & RS?

[@CalAndAly]

What about the newer one with 4 buttons and trigger stops??

[@megawave79]

Does this work on ps4 pro controller EDIT been using it great for f1

[@ConspirHerSee]

I could not snap this freaking thing back together to save my life. When I put the original controller pieces back together they fit perfectly, this one just will not line up fugghhh!!!!

[@JamieChristianTheGiant]

Thanks for the video man, I have one of these mods but it was delivered pre made and the triggers L1/R1 don't work. Is there something I need to do to program the controller. Using for Warzone, thanks in advance man.

[@JamieChristianTheGiant]

Apologies R2/L2

[@kyleburns6596]

I'm trying to figure out if I got a defective kit. Every time I plug the provided ribbon into the Dawn 2.0 board, my L2 trigger activates continuously. As soon as i unplug that ribbon (with the controller opened up) it stops and the controller acts as stock. I haven't been able to get into the programming mode either... any ideas?

[@Chr15Payne]

I don't have this version I have the original 4 button, but this may have been better for me since I removed the 2 buttons and only use the 2 lower placed ones

[@CraigsChannel]

If you've got v1 have you not looked into the clicky mod kit they do? I did a video on my channel, works great with v1 combined

[@pedroribeiro5996]

Bro extremerate decade tornament kit is better, it is on amazon looks really good.

[@SalvaXVII]

Do you sell any of these controllers?

[@rexinghosty4607]

They’re gonna do a better version on September

[@shinobi_666]

I'm hyped saw the image

[@shinobi_666]

@@WTFkidsGAMEPLAY go to the extremerate page then go to community it should be the first image

[@devilishmode]

Do you know if they sell the buttons separately? I have this same kit, but it has little flap type buttons. Did the solder to remap R3/L3 it’s crucial for shooters for mapping jump to!

[@TechSavvyBuyer]

You can reach out to them via email and see if they'll send em. Otherwise i have some extra ones laying around ;)

[@devilishmode]

Tech Savvy Buyer I found out that they do! Got a set of replacement red ones for £5 :)

[@sunnyjd3354]

Hey can the strike pack work along with this. Is there enough room or clearance for it ?

[@392BJ]

i have the 1st dawn remap kit with a strikepack and it works good

[@sunnyjd3354]

I got this kit and can confirm the the dawn kit v2 works with the strike pack

[@sunnyjd3354]

@@392BJ Thank You ! 6 back buttons that's crazy. How is it working out for you ?

[@392BJ]

@@sunnyjd3354 i removed them because i barely use them now, but they are good back buttons to use.

[@mortalsssandoval6898]

Can I install mods on it ?

[@orryyang8846]

nice video

[@G-Hex]

Does anybody know if L3 and R3 are still going to work like regular without the soldering? I don’t want to remap them I just want them to continue to work like the controller comes originally

[@declan_brant]

The original l3 and r3 buttons will work you just can’t remember the back buttons to them.

[@jackogaming5562]

Hi I have installed the original extremerate dawn with 4 programmable buttons and my ps4 controller randomly goes into programming mode whenever it feels like I followed the instructions everything is in place just wondering is this a possibility for installing something like this into your controller

[@CraigsChannel]

Just cut the wire to the remap foil or cut down the foil in size and use manual mode 👍

[@extendo......500]

Way more reliable than Scuff

[@bewarejaden]

yo yo i have been trying to mod my psvita using your vids but i am encountering so many errors please how can i send my psvita to you? ill pay for the shipping and everything

[@xavy009]

Don’t buy scuf it a hassle with them

[@cl4ssic]

i remember buying a xbox 360 scuf and this piece of shit felt cheap as fuck. nothing can be worse than scuf.

[@shinobi_666]

Just solder them lmao

[@TylerSmith-sd2oc]

"JuSt SolDeR tHeM" not everyone can solder lol

[@shinobi_666]

I’ve never solder before in my life this was easy

[@angeliqueramkissoon3396]

ds4 lol

[@AJ-vj3es]

Controller won’t power on now… thanks

[@lmShakeFTW]

You clearly did something wrong