Anyone else find these type of videos super relaxing? Not to mention super helpful? Cheers from New Jersey 🍻
@GPOutdoors3 жыл бұрын
Thanks Richard!
@theSkavenger843 жыл бұрын
Any time! Just got my Lx2610 last week! Still waiting for my loader and backhoe to come in, but i love This thing! Been watching you since you got yours, you were pretty much the reason i got mine
@JohnWargo933 ай бұрын
Awesome video, thank you! Just hit 50 hours on my machine and this video was very helpful!
@baronvonflop3 ай бұрын
Thanks for this - I won’t be nervous to attempt this now on my new 2610
@zunar_j5_9332 жыл бұрын
Great video! Thank you!
@tractorman44613 жыл бұрын
There’s no doubt GP that any used piece of equipment purchased from your channel will be properly serviced and well documented. Your efforts are by far superior to mine. Have a great week my friend !!
@petedegen82682 жыл бұрын
Slipped a synthetic absorbent oil diaper under the filter and no oil got on the harness. Clean operation. The vacuum trick for changing the hydraulic filter is stellar! I set the vac hose over the fill hole but sipped a large screwdriver in the opening on an angle to make a less than tight fit. Dipped maybe a ¼ cup at most. Quality instructional video so you know what you're going to see. Even experienced hands appreciated this quick look.
@Byron882 жыл бұрын
Just completed my first 50 hour service today, I was glad this video existing I remember watching it when it first came out and immediately came to mind to re-watch before tackling mine today, went great, I have a mid mount mower that has a linkage that blocks the suction filter (The gusher) which i removed before doing the filter, wife "Vaccume tricked" it for me, didn't loose a drop.
@Wildboyz1987 Жыл бұрын
Thanks to you GP!! I’m about to get to my 50h or so and your video kinda well prepared me for it! Cheers!!👌🙋♂️🚜
@briancharman27103 жыл бұрын
Wow 50 hours already. Your tractor does not sit still for very long. Keep making great videos Gord we really appreciate you taking the time to do them.
@GPOutdoors3 жыл бұрын
Thanks very kindly Brian. I am happy you enjoy them. All the best!
@437AlBig Жыл бұрын
Thanks for a great video. I'm only at about 15 hours on my 2610. I just bought it and it had about 14 hours on it. I just took the mid mower deck off last Sunday and then played around with the loader a bit, as well as the back blade. I can't wait to start using it, but first I've got to get through deer season. Cheers.
@georgemessner31713 жыл бұрын
I forgot to mention, I saw on a you tube video that you can put a shop vac hose over the transmission fill hole (take the cap off), and turn the shop vac on. That will cause a vacuum in the transmission case and reduce the amount of oil you loose changing the HST and HYDRAULIC filters. I did that, and it worked great. Good luck.
@michaelmactavish17283 жыл бұрын
thats the same 10w 30 oil i bought for my new 14.5hp 27'' snowblower and my 22'' mower wich i enjoy using kubota oil in gas machines
@ATR-422 жыл бұрын
I constantly find myself referencing your videos gord! thank you again, doing 50 hr service tomorrow :)
@GPOutdoors2 жыл бұрын
That's great - thanks ATR. I am happy it helped a bit. Cheers!
@chrishlifka86303 жыл бұрын
I was nervous about that second hydro filter dumping all over when I did my 50 hour on my 2650. I did see a trick using a shop vac to partially cover the open fill plug at the rear of the machine. I had my wife hold the vac over the fill hole, not completely covering it, and I probably only lost 3-4 oz of hydro fluid. It is a job that requires 4 hands though, so if you were alone, it may not be an option. Look forward to your videos and enjoy them tremendously. Cheers from the South shore of Lake Erie!
@ernestkooistra1559 Жыл бұрын
👍 Cheers!
@RCAFpolarexpress3 жыл бұрын
Great 50 hrs maintenance video GP 😊👍 Nice to have a nice warm garage 👍 Have a great week GP Cheers !!! 👍😊
@GPOutdoors3 жыл бұрын
LOL! Morning Dave. I wasn't looking forward to laying on the gravel out there so I was very happy Guy came to the rescue with a little shelter and warmth. Hope you are well my friend!
@RCAFpolarexpress3 жыл бұрын
@@GPOutdoors Guy is a real Gentleman GP👍😊 Keep warm and we receive 6 inch of snow this morning !!! Cheers !!!
@seather8633 жыл бұрын
Guy thanks for letting GP use your awesome garage!
@GPOutdoors3 жыл бұрын
Cheers Seather!
@dwaynerobare11533 жыл бұрын
Love it... Thank you for taking the time!
@timroberts31393 жыл бұрын
I appreciate all Your attention to every detail. You do not skip or hurry through and You are very articulate in describing the process while You are doing it. Thank You. 🤝
@PurpleCollarLife3 жыл бұрын
Hi Gord - thanks so much for showing that your cab tractor fits through a standard garage door. That's crucial info! Another great video.
@PurpleCollarLife3 жыл бұрын
P.S. - I made a video today that shows your channel banner in the thumbnail! Check it out if you get a chance.
@LouisianaTractorworks3 жыл бұрын
Nice maintenance video GP! Like always you were very thorough. Have a good week my friend!
@GPOutdoors3 жыл бұрын
Thanks John! Take care and be safe out there my friend!
@dwayneloftice23263 жыл бұрын
Great review and very timely. Just bought a new LX2610 yesterday. All maintenance items and check points duly noted along with precautions that I have practiced on all my "rolling stock" for decades! Thanks for the video.
@GPOutdoors3 жыл бұрын
Congratulations on the new tractor Dwayne!
@nddragoon13 жыл бұрын
6 hours on my LX2610...thanks for the video. This is so much better than the manual (although I've read it cover to cover already). Keep the great videos coming. Cheers from the Adirondacks!
@GPOutdoors3 жыл бұрын
You're welcome! Cheers!
@BradMyers3 жыл бұрын
Hard to believe you already have 52 hours on it, seems like you just got it.
@jared10093 жыл бұрын
Thank you! Great video and very detailed.
@mikes20203 жыл бұрын
Thanks for the video Gordy. My 50hrs service is coming up so I'm using your process as a guide. Only change is, I'll be using a vacuum to prevent that $$$ fluid loss. Keep up the good work!
@GPOutdoors3 жыл бұрын
Good stuff Mike!
@zacarmfelt2048 Жыл бұрын
Thanks for this tutorial it was helpful in my 50 hour service today! Appreciate all the vids you make to help the less knowledgeable expand their work on this unit & the other tools! God Bless!
@jh98553 жыл бұрын
Thank you for the great video on the 50 hour service check. The secret to a long life on machines is regular maintenance, be it airplanes, cars, or tractors. Oil and filters are cheap compared to major engine problems. Also, keeping the machine clean helps find problems when they happen. Glad you are loving your tractor and cab. Can't wait for your first snow removal video. Thanks for sending rain to Southern Maine! We also had some snow, but it is back to 60 degrees.
@GPOutdoors3 жыл бұрын
Morning Jean. So true. happy to hear you finally got some precipitation. Me too - it won't be long. Take care!
@woodland203 жыл бұрын
Your timing is perfect! I was going to perform the 50 hr service on my LX2610 this week when I noticed your new video. Thanks for all you do!
@GPOutdoors3 жыл бұрын
Good stuff - take care Mike!
@jrsmyth97613 жыл бұрын
On my 50 hour service I changed the hydraulic fluid for 2 reasons. First, I knew I would lose some, like you did. Second, I heard that changing the fluid helped reduce the whine from the hydraulic system. It did!!!! It is not silent, but in the cab that difference was very noticeable. To me the cost to do a complete fluid change was not that much more. now I know I have new fluid in all my needed places.
@GPOutdoors3 жыл бұрын
Morning Tom. I had not heard of that - reduces the whine - nice! Wish I had known. I may just do that on the next filter change. Thanks very much for the great info!
@WoodsTreeFarm3 жыл бұрын
wow. 50 hours already. seems like you just got this tractor! LOL. Good video
@olddawgdreaming57153 жыл бұрын
Great video Gord, a great job of show and tell. One of the many reasons your channel is so enjoyable to watch. I am thrilled every time I see you out in your new tractor in nasty, I know how much more enjoyable it is for you. Thanks for sharing with your videos with us. 👍👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@GPOutdoors3 жыл бұрын
Good evening Fred! I am very grateful for the heat and to be out of the elements. Thanks -have a wonderful week!
@MyClutteredGarage3 жыл бұрын
GP, you really racked up those first 50 hours quickly! Nice job. -Ed
@bobschreier94762 жыл бұрын
GP, just did my 50 hr service. I got a tip from a service guy on how to minimize fluid loss on hydro filter changes. if you block the hydro vent by the fill cap the loss is minimal. I only lost 1 qt of hydro fluid all together.
@edwardkenny23563 жыл бұрын
All good information, GP. Thanks, Guy 😁
@christhomas98373 жыл бұрын
Gord that tractor is spotless considering the places you have taken it. Who ever bought your 2601 got a well looked after unit.
@michaelmactavish17283 жыл бұрын
takes me 5 or 10 mintues change oil on a kubota mower and 6 1/2hours on a newholland wich is a pain
@RB-tt9go2 жыл бұрын
Thanks for this video Gord, Great info that I used. As I mentioned I took delivery of my LX2610 in March and I just did my 50 hour yesterday. Up here in Northern Ontario we still have a fair amount of snow and the lake is still froze over. Cheers!
@jpcradic46503 жыл бұрын
I knew you would love it!!
@mdh78123 жыл бұрын
GP, good video. I take an aluminum flashing shingle and bend it over any wiring that is under the filter. Works pretty good.
@GPOutdoors3 жыл бұрын
Thanks for the great tip MD! Cheers!
@DIYMyWay3 жыл бұрын
Hi Gord! Wow, 50 hours already! Time flies! Great job on the maintenance. Looks like the filters aren’t conveniently located on the LX series. One thing I appreciate about the L series is all the filters are easily accessible. BTW, I like you new blue smurf outfit! You’re going to start a fashion trend. Thanks for sharing!
@GPOutdoors3 жыл бұрын
LOL! Good morning Martin. It was Guy's (you could probably tell...:)) All the best!
@tomashbaugh88913 жыл бұрын
Yo Gord, congratulations on the first “50” and to many more. Boy, that came up fast! Cheers
@GPOutdoors3 жыл бұрын
LOL! It sure did - it kind of caught me off guard. Thanks very much Tom!
@michaelwebb8042 жыл бұрын
GP, great video thanks. Just completed my first service and have 2 tips for others. First - drain and save your transmission fluid into a clean container. You can easily lose a gallon or two of $25/gal UDT2 fluid into your waste oil. Return the captured fluid back into the fill. 2nd - there is a stiff coolant hose above the oil filter. I used a pair of long nose vice grips to clamp it out of the way. There is a metal bracket available to clamp it to. Worked very well and avoided wrestling with the oil filter wrench. Cheers
@GPOutdoors2 жыл бұрын
Hey thanks so much for the great tips and advice Michael! Awesome! Thanks for taking the time to share it with others.
@mgeren3 жыл бұрын
I use a 1gal milk jug to keep oil filters from dripping all over. Cut off half of the jug , opposite of the handle, and DON'T cut off the lid. You may have to trim to the contour of the tractor, but then you can catch the oil in the jug and later drain it into your pan. I use the same jug for my Generac filter as well.
@PurpleCollarLife3 жыл бұрын
Hi Matt - that's another great idea! Thanks for sharing. I've picked up two ideas that are far better than the typical "unavoidable mess" I usually encounter. Glad there's lots of people out there thinking AND sharing their ideas!
@hc7190 Жыл бұрын
A hint when you change a filter that goes in sideways. Fill it up with oil and let it set for a few seconds to get the element soaked with oil and dump it back into container. You will be surprised how long this takes with some really good filters to soak in. This will decrease the time the filter gets activated so your engine isn't going without oil as long. Trust me this can make a huge difference for your engine. If you use a syn. oil not quite as important but I still do it.
@la435kubota Жыл бұрын
The use of a vacuum on the Oil Inlet no doubt works well. Another thought is before removing the Oil Inlet rubber cap would be to grab the Breather tube next to it and suck a bit of vacuum on it then pinch it off with a clamp. Then go remove the Hydraulic HST filter and likely the loss of fluid would be minimal then too.
@dpoff13f453 жыл бұрын
Perfect. I just hit 50 ours in my LX as well. Going to be doing this next weekend.
@GPOutdoors3 жыл бұрын
Good stuff and good luck! Cheers! When you get your parts at your dealer, you may want to ask them if they have "Super UDT2" transmission fluid. When you look in the back maintenance section of the manual you will see it recommends it. On the next page it also says that regular UDT is also safe to use. Take care!
@paradiseranch24213 жыл бұрын
Hey GP, just like everyone else I must say it is hard to believe it has already been 50 hours! For protecting that wiring harness I've always used a product called "form-a-funnel", it is fantastic to protect about anything anywhere from oil and readily available on amazon. As far as the coolant goes I can vouch for new cars coming in for their first oil change they were almost always just below the cold fill mark. As everything works it's way around, goes through a few heat cycles, and all the tiny little fine air bubbles work their way out the radiator sips what it needs to take up that area out of the overflow. Nothing to worry about and I doubt you'll have to top it off again anytime soon. Very happy to see you out of the elements this winter even if it is only while in the operator's station! You have certainly earned some comfort while battling old man winter. All the best, cheers!
@GPOutdoors3 жыл бұрын
Morning Robert! Thanks for the great info on the funnel, and the helpful knowledge on the coolant etc. That's great to know - I will keep an eye on it as always. It certainly is a big difference having heat. Thanks again - have a wonderful week out there!
@mikes20203 жыл бұрын
@@GPOutdoors Be cautious of the Form a Funnel copies out there. If you get one, the real ones cost around $40US.
@bobpurs3 жыл бұрын
Have a good week GP. 👍✊
@deanbarr57403 жыл бұрын
Good job GP. I done mine earlier in March of thi year. I did exactly what you done. Some folks use a filter wrench to tighten the new filter, i disagree with this method. Hand tight has always worked best for me. That cab is great. Makes me want one😊
@GPOutdoors3 жыл бұрын
Thanks Dean! Me too - I feel better because I can feel the tension in my hands. Very happy to have some heat. :)) Cheers - all the best my friend!
@marksleeper37523 жыл бұрын
Great vid, we just purchased a new LX2610 Deluxe kubota with land pride forks, land pride 6' scraper blade ,Q-15 land pride speed hitch . loaded R4 tires skidsteer quick tach on the loader and a bucket with a bolt on cutting edge and we have a 5' woods PRD finish mower for it.we also have a JD 4052 R cab we just bought last year
@GPOutdoors3 жыл бұрын
Awesome Mark. Looks like you are ready for anything. LOL. Hope you enjoy it as much as I do. All the best!
@marksleeper37523 жыл бұрын
@@GPOutdoors Thanks and Thanks for all the great vids you do
@peterkober67583 жыл бұрын
G P thanks we usually have the dealer do ours when there get some new options God Bless All PaK
@michaelknulle69243 жыл бұрын
Good job Gord,and a good looking overall.
@danielrapoza84682 жыл бұрын
Gord, Super important video, thank you for sharing. If I could make one suggestion- prime the engine oil filter before installing. Fill 3/4 or so full of engine oil, before you install it. It really helps to get oil flowing much quicker than empty oil filter. Foil tent over wiring harness is great to protect oil drips both for filter off and on. I enjoy your content!!!
@eosjoe5653 жыл бұрын
Before you change oil the next time pick up what's called a Form-A-Funnel. They are inexpensive and come in different sizes. It's a thick rubber sheet with malleable material inside that allows you to bend and form it into any shape you need. I stick the edge back under the lip of the engine oil filter and then bend the other end to form a "V" so it directs all the leaking oil into the drain pan and keeps the drippings off the engine, wires and frame. When finished just wipe it clean. I've used it for draining all types of fluids when they want to run the wrong way and make a mess. I have a small and large version which fits most any job.
@ddelano74083 жыл бұрын
I use aluminum foil in one of two ways. If the filter housing sticks out from the block, I make a half circle of the foil and put it under the filter and up tight to the block and make sure its tipped down a little so when the filter is loosened the oil runs down the foil and into an oil pan. If you can't do that then wrap the foil around the wiring harness. Love your channel!
@GPOutdoors3 жыл бұрын
Thanks D! Great idea!
@tomfillmore97103 жыл бұрын
Good maintenance you was right you do have to be fast with that bottom hydraulic filter I would probably have to add more than 3 litres if I was doing little slow but you did well there is times when the cab can make thing a little awkward but the good will out way the bad thanks for sharing have a great day
@rockandrattleretreat58303 жыл бұрын
To help your engine fill your oil filter with oil before you put it on and the engine will get oil quicker to its moving parts, which is less wear. Got that trick from Paul Short. Go look at his channel for maintenance and he is now building custom mods for kubota's.
@jrsmyth97613 жыл бұрын
Yes, that is a great idea, but when there is oil in the filter and you are trying not to spill it on the wiring harness you decide to forgo that step.
@beozzie6903 жыл бұрын
Nice one GP, although I’m surprised Guy actually let you out of the garage.. This was his chance to commandeer that cab off yours.
@GrampiesWorkshop3 жыл бұрын
How's she goin'? Nice job on the maintenance GP!! Keep that up and you're tractor will never let you down!! I have to say you were a champ at getting those hydraulic filters changed with the oil running out like it was. Under pressure and you nailed it!! Awesome!! Thanks for sharing and take care!!
@Redhawk243 жыл бұрын
I have same tractor and cab. Cab will fog up in winter. Make sure vents are pointed in correct directions and your air recirculation is not on. Keep up the great work!
@GPOutdoors3 жыл бұрын
LOL! I was all steamed up this morning for a while but it eventually cleared. Thanks- I re-directed the vents. :))
@briansilver34123 жыл бұрын
@@GPOutdoors Remember the rear window has defrost heater elements as well. I was driving around with the rear window cracked open until I figured out how to turn on the defrost.
@peacefieldfarm_mn3 жыл бұрын
You are rocking those nice blue coveralls, GP! You were pretty quick on that filter change while the hydraulic fluid was gushing. Impressive ! I am glad that maneuver only needs to be done once. next filter change will require a fluid change at the same time. Cheers!
@lawrencebessette7543 жыл бұрын
Gp great video ooo and I think you need to give me that old tractor lol I do wish I had got a cab on my l2501 can’t wait to see what you do next thanks for sharing
@benjybaldwin7733 жыл бұрын
Next month I will have own my tractor for one year and I already have 301 hours on it won't be long I'll be doing my 400 hour service
@richardperry90953 жыл бұрын
The 'rule of thumb' is to add one pound of torque for each inch of the extension you use. So if you use a 6" extension, add 6 pounds of torque to your wrench. That makes up for the flex in the extension.
@richardperry90953 жыл бұрын
@Fred Wills well than you’d best tell the instructors for Mr. Goodwrench certification school. That is what they said 30 years ago when I got certified.
@briansilver34123 жыл бұрын
I suppose it would depend on the rigidity of the extension. The difference between a 3/8" and a 1/2" would be significant. BTW this extension flex is the principle behind torque extensions that you can use in lieu of a torque wrench.
@richardperry90953 жыл бұрын
@UCzeq0I7jCfgTQVJQPxy5hHQ it depends on the extension. If you use one intended for use with a torque wrench is one thing. But most people’s extension is the standard.5” dimension. There is flex in it. He showed the physics in the class. I assumed he is using a standard extension
@sonnicman3 жыл бұрын
My understanding is the material the bolt is made of can also impact torque specifications as well.
@richardperry90953 жыл бұрын
@Fred Wills Well I have to admit I was wrong.After your post I did more research. Most say what you do, that an extension makes no difference. Sad that I was taught wrong so many years ago...I've used wrong information building engines, setting bearing load, and much more. As far as I know, I've never had a failure adding a few pounds here or there on my torque, but I will rethink. Now that I'm retired from machanical work it probably won't help me much now....
@snowismas3 жыл бұрын
extensions do not affect torque, an extension may twist, but its not robbing any torque. Adapters like crows feet that change the effective length of a torque wrench do change the torque.
@BeginnerforBSeries3 жыл бұрын
Enjoyed as always! I did mine for the first time on the B2650 with the camera rolling. I know just how hard that hydro comes gushing out and you just have to roll with it and not panic. It wasn't nearly as bad as I thought but I did chuckle hearing the tension in your voice when you were about to do it. Cheers and great job!
@GPOutdoors3 жыл бұрын
LOL! I knew she was coming fast and furious. :)) Cheers BBS!
@CanadaPhilippinesAdventures3 жыл бұрын
I also have a B2650 - next time take your cap off at the rear transmission fill hole and stick in a shop vac hose and turn it on. Won't pull up any fluids into the vac but stops your hydraulic fluid from pouring out when removing the filter like in the video. Really works!
@BeginnerforBSeries3 жыл бұрын
@@CanadaPhilippinesAdventures I have read that technique but like @GP Outdoors I was a Lone soldier. I only lost about a 1/2 quart.
@CanadaPhilippinesAdventures3 жыл бұрын
@@BeginnerforBSeries I do the service myself also but using this technique mentioned - I do not loose any :) I just turn on the vac and swap filters - no loss of any fluid.
@BeginnerforBSeries3 жыл бұрын
@@CanadaPhilippinesAdventures I'll have to give that a try. Thanks!
@je12792 жыл бұрын
Thank you as always for this helpful video GP. I'm at around 46 hours now on my LX2610 and have a rare ~60°F December day coming up so I'm going to take advantage of that and complete my 50 hour service. Hope all is well and that you and your family have a safe and happy holiday season!
@ronalddean48343 жыл бұрын
Hi G.P. great job I like working on my tractor as much as working with my tractor. One thing I've noticed. It's almost the same price to use oem parts as to use aftermarket parts. And you know with oem you have the right stuff. Tractors are to much investment to not take of it. Thanks for sharing. Have a wonderful week
@rohoroyarrington32243 жыл бұрын
Nice overview of caring for your equipment GP. Now I feel the need to go and check out my 23S and make sure all is ready for winter as well. lol We had our first snow flurries here in Southwest Ohio yesterday. Just a reminder from mother nature of what's coming. Cheers
@tomkeating653 жыл бұрын
I take it back. It'd be nice to have a little tractor to putter around with. Be nice to get outside and do something. I used to love mowing and snow removal. 🙃🙃🙃
@GPOutdoors3 жыл бұрын
:)) Cheers my friend!
@craigh60382 жыл бұрын
Great video, so glad I watched before I did my 50 hour. Perhaps some help, I found the wire harness under the oil filter is held by a removable zip tie. I opened that up and there is enough slack to move the wires above the oil filter. Maybe that will work for you next time. Thanks again!
@HysTaRiCFiSHy3 жыл бұрын
You got over 50 fast on this one!
@GPOutdoors3 жыл бұрын
LOL! It snuck up on me fast, Fishy! Cheers!
@HysTaRiCFiSHy3 жыл бұрын
Great! I’m glad it’s being used. I put 80 in mine in just a few months working over our property before building our house and for firewood work. Only 3 hours in the last couple months, but pretty soon our house will be done and she’ll be back to maintaining things!
@janskoropinski103 жыл бұрын
I have found that it is wise to also check the torque on the loader main frame. I have found loose bolts.
@chrishunt52913 жыл бұрын
On my massey ferguson 1723e, you have to change the front differential and transmission fluid along with the filters. Wish I didn't have to change it all.
@gregskie16 ай бұрын
Noticed the jack stands at the very end of the video, but didn't see them in actual usage during the various maneuvers. Are they very helpful for any of the important steps?
@GPOutdoors6 ай бұрын
Morning Greg. No, I had them at hand but I didn't need them - only needed when I jack the tractor up on a pump jack. Cheers!
@OrangeismyNewGreen3 жыл бұрын
As usual another great video Gord, could you take an actual measurement of the opening when the garage door is open, I’m curious 😉, I have the BX2380 and the top of my ROPS slightly touches the door edge so I always try 🥴 to remember to lower them. 🤦🏼♂️😂Have a good week 👍🏻
@danlaabs50903 жыл бұрын
If you have someone loosely hold a shop vac over the fill plug you don’t loose any oil to speak of. Just leave a air gap with the vacuum hose or you will suck out your hydro fluid.
@heavysnow86162 жыл бұрын
GP, no torque recalculation is needed when your torque wrench and extension form a 90-degree angle. Great job!
@jurpikag3 жыл бұрын
Hi Gord, I the filters are grey from factory since they are on when they paint them.
@denslod29303 жыл бұрын
I use the plastic bag that the newspaper comes in to take oil plug out( as a glove)
@xjfo3 жыл бұрын
I see it has been mentioned already but I do like my Form-A-Funnel. Amazon sells them. I also use the torque spec from the manual when I put the oil plug back in. Maybe overkill but its easy to do.
@GPOutdoors3 жыл бұрын
Morning Christopher. Thanks! I did not see that there was a torque value in the manual or I would have used it for sure. Thanks for the helpful info. Cheers!
@xjfo3 жыл бұрын
@@GPOutdoors I have a BX23S so the manuals will be different but I found the value in the Workshop Manual under Engine - Tightening torques for engine. For my tractor the torque for the drain plug with copper gasket is 24 to 27 lbf-ft, 33 to 37 N-m or 3.3 to 3.8 kgf-m. Hope this helps!
@GPOutdoors3 жыл бұрын
It does. I will take another look. I have read it several times but I always find I miss things. Thanks again Chris!
@christopherboone98853 жыл бұрын
Using a Extension on a Torque wrench is fine as long as the extension is bigger diameter then the shank on the bolt or stud
@mattflorence60603 жыл бұрын
GP, I have the same tractor, just an open station. I have seen videos of guys using shop vacuums on the top of the hydraulic fill to create a vacuum when they change the "gusher" filter. I love watching your videos, keep them coming. :)
@TelescopeJunky3 жыл бұрын
Gord does the Kub take a while to get an accurate reading on the hydro fluid level? All of the tractors I have owned always took a while to register the correct fluid level but I have never owned a Kub. That is nice you don't have a strainer to clean at 50 hours. I also go around the entire tractor every 50 hours and tighten all the frame and ROPs bolts. Amazing how loose they get sometimes or how loose they are from the factory. 🙂
@NHHalKnowsHow3 жыл бұрын
Gord, to protect that wiring harness you could "tent" it with tin foil so the oil doesn't touch it.
@GPOutdoors3 жыл бұрын
Thanks Hal. That's a great and simple idea. Cheers!
@sonnicman3 жыл бұрын
13:45 LOL, nothing like a nice warm cab on a day like that. I gotta ask, for spending that much money on a tractor, you'd think the first 50-hour service would be complimentary. Also what I do sometimes is to take a piece of cardboard, crease it in the middle, and tape it to the general area I'm draining with gorilla tape. That way your fluids run down the crease and into your collection vessel versus just oozing down all over the place. I'm assuming the electrical cord I saw is for some sort of engine block heater? Cheers my friend.
@mberry7a3 жыл бұрын
I have heard of using aluminum foil to keep oil off of wires and other things. Never tried it might work for wire harness.
@justadbeer3 жыл бұрын
It works great!
@joeyd6203 жыл бұрын
I'm getting ready to do my 100hr on my B2650.
@tomashbaugh88913 жыл бұрын
Gordy- Next time you change oils filter place a ziplock plastic bag or a plastic grocery bag around the oil filter before you remove it. As you unscrew it it should just drop in bag and keep your mess to a minimum. Cheers
@GPOutdoors3 жыл бұрын
Great tip - thanks Tom! Cheers!
@PurpleCollarLife3 жыл бұрын
Tom - Genius! How have I never figured this out on my own!
@mitch_smith3 жыл бұрын
50 hours already! That was fast GP! Note: on the filter (oil i believe) that is near the wiring harness, would it be possible to break the seal, enough to allow the oil to drain out, then remove it after it's had time to drain. I appears to have roughly 1 cm of clearance between the seat and the wire. if the oil is running alongside the bottom of the filter, while draining, just put a straight edge, piece of card board up against the filter to break the plane of travel for the oil, and it will run down your straight edge, opposed to the end of the filter towards those wires. Also, when using an extension on a torque wrench, I wouldn't worry to much about the "loss" of the extension. However, if you are so inclined, there is a formula to determine accurate torque settings when using an extension, you can google torque extension caclutations and get the info pretty easily. basically an extension creates more torque than than what you set on the wrench.
@OutdoorsEngineer3 жыл бұрын
Maybe punch a hole in the old oil filter and let it drain into a funnel so it doesn't land on the harness?
@larryaubertin42262 жыл бұрын
Torque is torque, it doesn’t matter how long the Ext’n is.
@donbrutcher45013 жыл бұрын
Those overalls may you look like a public service smurf.
@GPOutdoors3 жыл бұрын
LOL! Guy loaned them to me - I guess you can tell he is 6'5" and a little bigger than me. LOL. Cheers Don!
@sonnicman3 жыл бұрын
I like your analogy, Don. For me, he reminds me of the ground crew at my local FBO. All he needs are the earphones and some orange wands and he'd fit right in lol.
@deanstrickland69933 жыл бұрын
GP, I’ve been bedeviled by steaming up of my glass inside just like yourself in my B2650. I’ve used RainX glass treatment inside with partial success. One of our Kubota buddies has mentioned using the AC in winter to dehydrate the air circulating to the inside of the cab. I’ve tried it but that hasn’t worked to well for me either. Anyways, I would appreciate it if you could give an occasional update over the winter on your experiences, please. The only other hysterical issue I have is that I find that my AC in the summer works far, far better than the heater in the winter! I’ve had it checked out at my dealer and they cannot find any anomaly. I live in more moderate winter temperatures than you most likely. Again, I would love to hear about your experiences over the course of your first winter with your most beautiful new tractor! Take care and stay safe.
@jrsmyth97613 жыл бұрын
There is a defrost setting on the controls. It is not very good at doing its job and I think that is due to the design of the airflow. It seems weak.
@deanstrickland69933 жыл бұрын
@@jrsmyth9761 Thank you. I tried every combination and permutation of the controls and the vents. I’ve worked out a ‘summer’ configuration and a ‘winter’ configuration, the latter works much of the time. However, with the enormous amount of glass relative to the number, position, and heat transfer rate from the engine to the cab, I concur with your position that it is a little weak. Thank you again and have a wonderful day!
@GPOutdoors3 жыл бұрын
Good morning Dean. I will for sure. So far the heat seems very strong but we will see as the temp outside drops further. I will try to mention it throughout the winter. Thanks for sharing and letting me know!
@m.cooper18543 жыл бұрын
I was surprised to see that you were able to remove your hydraulic filter without a hammer and chisel. They are painted gray with the frame at the factory and the paint creates an immovable object. My Kubota dealer warned me so I expected it on my L6060 but it was a ridiculous struggle at the first service.
@GPOutdoors3 жыл бұрын
Morning Coop! I thought about them being painted in, so to speak, so wasn't;t sure what to expect but they came off just fine. All the best!
@kevinliveez41923 жыл бұрын
I'm not trying to be a know it all ,but. the filter was so tight and hard to get off because the factory did not lube the gasket on the oil filter. A light coat on the gasket will save you a lot of aggravation later. Thanks for the entertainment Gord
@GPOutdoors3 жыл бұрын
Thanks Kevin. And I always appreciate you sharing info. Cheers and all the best!
@markcole6475 Жыл бұрын
You’ll get accurate torque with an extension using a manual torque wrench like your doing! If you use a electric or air impact you may not get proper torque! Calibrated torque “sticks” are used when power tools are required!
@GPOutdoors Жыл бұрын
Thanks Mark!
@kacpass2 жыл бұрын
Thanks for the great video! When you say “Hydraulic Fluid” do you mean transmission fluid?
@GPOutdoors2 жыл бұрын
Morning Kyle. It's the same thing on this tractor. It's a hydrostatic transmission. Cheers!
@kacpass2 жыл бұрын
@GP Outdoors 👍
@ronschutt Жыл бұрын
Great video, thank you. Do you have any experience removing a mid mount mower? I can perform my 50 hour service because it's in the way. Thank you
@ctskidoo3 жыл бұрын
Turn the AC on when windows start to fog. Can be done with heater on.
@bradkearns3660 Жыл бұрын
Hey GP, great videos. I just bought a LX2610 cab model and I get it the end of April. How does the heater work, does it keep all the glass fog free? And the factory radio how is it good or bad, maybe I should get a name brand from Best Buy? Pretty excited about the new purchase. Thank you
@GPOutdoors Жыл бұрын
Hey congratulations! You sure are, Brad LOL! It does indeed- just leave the fresh air vent open. And use the air conditioning :)) Radio is good but static - y sometimes - I think it is because i am in or surrounded by the forest. It will bluetooth for phone calls - but it won't bluetooth music or podcasts from your phone though - just calls. Congrats again - let me know how it goes!