$350 Elegoo Neptune 4 Plus 3D Printer

Easily my favorite of the Neptune 3D Printers - the new Elegoo Neptune 4 Plus - This might be the best affordable Cosplay 3D Printer $350
Thanks to Elegoo for Sponsoring today's video!
Neptune 4 Plus - bit.ly/Neptune4Plus
Neptune 4 Max - bit.ly/Neptune4Max
New PLA Colors - amzn.to/3tKK24A
Mars 4 Ultra $309 ➜ bit.ly/Mars4Ultra
amzn.to/44TKn1r - Amazon
Mars 4 $259 ➜ bit.ly/ElegooMars4
Neptune 4 Pro $299 ➜ bit.ly/Neptune4Pro
Neptune 4 $259 ➜ bit.ly/Neptune4
NOW ON AMAZON ➜ amzn.to/44kLsiJ
Neptune 3 Max ➜ amzn.to/3YRKE3F
Elegoo Rapid PLA ➜ amzn.to/3QPJ942
Mars 4 Ultra $309 ➜ bit.ly/Mars4Ultra
Mars 4 $259 ➜ bit.ly/ElegooMars4
Saturn 3 Ultra 12K $499 ➜ bit.ly/Saturn3Ultra
Saturn 3 12K $399 ➜ bit.ly/ElegooSaturn3
Mars 4 Max $300 ➜ bit.ly/Mars4Max
Mars 4 DLP $500 ➜ bit.ly/Mars4DLP
@TheFeralEngineer video on how to fix the Homing Grinding
• Elegoo Neptune 4 Plus ...
Files from todays video
Skeleton by Zou3D
/ zou3d
Pumpkin by Wekster
/ wekster
One Piece Compliant Blaster by BYU CMR
www.printables.com/model/5405...
Fragmented Skull String Art by 3DPrintBunny
www.printables.com/model/6026...
Phantasm Mask by 3D Craftsman
/ 3dcraftsmanshop
Baylan Skoll Bust by Eastman
/ eastman
Deadpool Skull Mask by YoshStudios
/ yoshstudios
Bony Basilisk by Mimetics3D
than.gs/m/942802
MY PATREON / My 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resinlapse
Some links on this page are affiliate links that help out the channel.
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZbin ➜ / unclejessy
________________________________________________
Thanks for watching!
#3DPrinting #3DPrinter #unclejessy

[@wekster]

Thanks for including my pumpkin model :D

[@zemopo6702]

Where can I find that pumpkin model, I’m wanting to make one.

[@aduck6199]

@@zemopo6702thingiverse probably

[@rebootdc]

I bought this one and thanks to UJ profile I was able to print my first job successfully. I am still tweaking my bed leveling but getting there. I also bought yesterday a Bambu X1 carbon combo that is on sale for Black Friday. Can’t wait to get that one.

[@Sully948]

Im on day 3 with my neptune 4 plus, and so far im absolutely blown away. This is my first "real" printer, as my first printer i got a month and a half ago was a crappy little Easythreed K9 printer from temu. The speed and quality im getting with only just beginning to tweak settings is wild! I cant wait until i get it fully dialed in!

[@Matt-ek6bf]

I'm thinking about getting it to print helmets and cosplay stuff. Would you recommend it? Also, would it fit full sized helmets?

[@Sully948]

@Matt-ek6bf if you're looking for full size pieces for cosplay, I would go with the Neptune 4 Max, the plus cam do most helmets in one print but the extra print area of the max will open up even more prints as one piece, especially for the price difference. I still love my 4 Plus, but I would have gotten the max if I was buying again

[@Brendan.D]

What slicer did you use im having biiigg trouble finding a slicing software to use for the Neptune 4 plus so plss help me out / tell me what slicing software you use

[@altcoinlogic9121]

@@Brendan.D if you bought the neptune 4 plus, it comes with cura on a little USB stick in the packaging

[@matthewheer6019]

love the videos and thank you for making the orca slicer profiles! Could you possibly put a video together going over how to calibrate and tune the mesh profile for the neptune 4 printers? Is there a way to adjust it so the mesh profile isn't so wavy and more flat? Or would I be looking into using thermal tape under the build plate to accomplish that?

[@StormBurnX]

Time to finally get into Elegoo, I think! Really loving what they're finally doing with their machines.

[@Dlutheran]

Just got mine and excited to get started printing with it

[@bbgg2007]

Nice video as always! I have really been enjoying my Neptune 3 Plus and really want to get my hands on a 4. Also on my printer I had the exact same issue as you did and when I finally cleaned all of the PLA off the print head I found that the silicone sock had moved a bit and covered up the nozle. Could be the same issue with yours. I had a print that did not stick 100% and I think it caused the silicone cover to snag anyway keep up the great work!

[@hansiminator69]

Mine should arrive in a few weeks and I'm very exited! :)

[@BOSTON_DESTROYAH]

got n4max cuz of your other video, it a great printer thank you for you all you do my man

[@benjaminvdvyt]

Mine is coming in today, received my A1 Mini today. These 2 are replacing my Ender 3 S1. Basically the perfect combination, 1 for small and colour prints, the other for large projects. I considered the max, but it's so massive and the Plus is more than big enough for helmets and such.

[@metarts]

Wie läuft es mit den Helmen ? Klappt es mit dem Drucker ? Und ist der viel lauter als der a1 ? Ich überlege mir auch den neptune plus zu kaufen ..

[@lancefrancedance]

Oh wow! This printer looks awesome! What was the filament that you used on the articulated skeleton dragon? Such a perfect color for that print!

[@unholyorders82]

After your last review on the plus and max I purchased the Neptune 4 plus! Been printed on it everyday and leveled only once! Also uploaded the M600 filament change and so far no problems and gonna get another one!

[@simbian5900]

How does the Neptune 4 working now 5 months since your comment? Im interested in one.

[@MakerPi_3d_Printer]

Very professional video as always,good for you

[@levidarling5107]

Nice review Uncle Jessy, I don’t mind stringing really, as I only make parts for buildings, rolling stock, and locomotives of 1:32 scale where I can easily just file, sand, prime and paint to make my parts to finish my projects and products I hope to sell soon.

[@Cxrpsy]

Honestly love this one better than the max and it looks like it prints way better too. I think I might pull the trigger on this for my first printer.

[@fakumadda1632]

Thanks for being honest about the various problems you've had with these printers. It lets me know I can trust your reviews. I was ready to pull the trigger on the 4 Max but after seeing several of your videos, I went with the Bamboo Labs P1S with AMS. Core XY printers are just better. Besides, I feel Elegoo was cheap putting pom wheels on all axis (except pro) and still using leveling knobs for z axis. This is old tech, although the price point is very good, I'd rather pay a little more and get the Kobra 2 max if I was to get a bed slinger.

[@stevekorzeniewski6895]

Holy crap ! For the price this is dang good ! I love that Dark blueish filament you used on that one mask ! Nice job

[@BryanBalak]

Love my Neptune 4 Plus. Size hits the sweet spot. I'm going to turn my 3 Plus into a Klipper project after seeing the speed of the 4 Plus.

[@UncleJessy]

100% agreed. Really sweet spot on the size/price/prints

[@dylanwiley1921]

Early squad I haven't had a chance to setup my neptune 4 plus yet but excited too!!!

[@hybrispsycho1]

thanks for the video been waiting on this one for awhile. i am however concerned that i had the exact same issue as you with the extruder and had a major clog and have a replacement on the way. not sure if this is unusual to be such a common problem as this is only my 2nd printer. elegoo support however have been great and hopefully its a one off and just teething issues

[@reactedboss9933]

I plan on getting one on the 30th of this month and I'm so excited. It'll be my first printer so hopefully it does me good cause I am worried lol.

[@3dpathfinder]

Waiting on my now, maybe tomorrow ! Joined your patreon for the Neptune 4 profile for Orca Slicer

[@StevenKelley]

Great video Jessy! So i'm getting the Neptune 4 Pro for Christmas mostly because it has metal rails over the 4 standard series, I had the Saturn S for resin for a year now and absolutely love it but wanted to go with an FDM next for larger scale prints. I'm starting to think I should have gone with the Neptune 4 Plus instead. Thoughts?

[@KenWalkersquatley]

How much space does this machine require? Particularly interested in front to back with print bed full extended to the rear. Thanks for ALL you great videos

[@offaxisfpv]

very cool! Thanks Uncle Jessy!

[@Print-Productivity]

What print settings are you using man? Looks amazing!

[@Liberty4Ever]

I bought a Neptune 4 Pro several months ago and have printed a lot with it. TPU shot out the side, escaping between the extruder and hot end, which broke the plastic extruder housing on the right and top where the filament feeds. Elegoo sent me a replacement extruder assembly and I bought another on Amazon. I wish there was no escape path because I print a lot of TPU. I'm considering a Neptune 4 Plus for a new product that's ABS (maybe ASA-CF). I need the larger build area and the Max won't heat the larger bed hot enough for ABS or ASA. I wish the Neptune 4 Plus came in a Pro version with steel rails on the X and Y axes.

[@timhoover1416]

Wow, quite the value. I only wish I had not purchased my CR10S back in February this year. I have moded that thing up to get close to what this printer has out of the box and I have way more money in the CR10S now...

[@sonub5401]

Jessy, did you not experience the stringing with the Neptune 4 Pro? Have you found a way to reduce or completely eliminate the stringing? Thanks for your videos. I’m once again looking at buying my first 3D printer.

[@ejsin5022]

5:58 I may be wrong, but from what I remember, threads/strings that appear during printing are most often caused by wet filament, I often hear that the filament should be dried before printing because it has very high hygroscopic properties

[@scottodonnell6488]

I always get stringing first thing with new printers and personally it has always come down to the flow rate! Silk PLAs require slightly higher, around 103% for me stopped stringing, but for normal PLA+ like 98%. Though I feel exact values may also depend on the printer, speed and temp

[@hightde13]

I saw some videos on the stringing on the pursaxl multi tool prints and it makes me wonder if part of the stringing on the plus and max aren't like normal machine stringing but are caused by the excessive cooling blow strings of filament off the nozzle, kinda like making hot glue spider webs for halloween.

[@swarm_3123]

im glad your experience has been good because mine has been terrible, ive probably re-leveled this printer like 20 times and i cant get anything to stick other then a small print in the middle of the bed and 2 of the test prints, ive contacted elegoo for help yesterday so hopefully they give me some sort of response soon

[@don_dad]

Did you get it figured out?

[@OriginalSharpe]

@UncleJessy Is the Neptune 4 Max a good by at this time? I have read that a number of people are having issues getting it to print well. Should I wait a little while until some of the bugs are fixed or jump in now?

[@aloneinfiction4101]

Great video 👍🏻

[@thebrixologist5174]

This video just popped up as I am sitting here trying to decide weather to pull the trigger on the Neptune 4 plus or the Sovol SV07 plus. I have both in my carts and trying to figure out what one I want

[@FelipeGonzalezHerrera]

At Aliexpress there are a lot of nozzles for the 4 series including a CHT clone variant and hardened stell ones.

[@frankuribe3924]

@unclejessy what would you recommend the 4max or the bambu lab p1s?

[@nmaparicio]

I'm looking to buy my first 3d printer... but leveling it's something that makes me think about something like a P1S(p) or Flashforge Adventurer M5 (Pro)... the price tags it's not the same, but... 320x320x385 should be my choice. I'm want to print some luminaires, maybe new business.... what do you think? what should be your choice for a first printer?

[@PlasticVibeMusic]

which one would you choose between the neptune 4 plus and the K1 max?

[@DJ_Blaker]

just bought this printer today!

[@Th0r2814]

What is a good beginner filament printer and what settings should I set it at for a good print?

[@vengfulteapot7045]

I am looking at this for my 1st printer, did you ever get the stringing issue sorted out?

[@zackfolmar227]

Just got my N4+ a week ago and really enjoy it! Just need to figure out how to get rid of this weird artifact Ing pattern that is appearing. Other than that it’s been doing really good so far!

[@rodrigotm1461]

Do you by any chance use the default slicer settings of cura or prusa slicer for the elegoo printers?

[@HeathcliffcazaresMeza]

i own it and its great, only the firmware is a little junky but with a flash it done

[@kenkrugger]

I LOVE mine!

[@3dprintingwithageek]

I'm thinking of buying an fdm printer. But i'm used to resin printers I was wondering if the layers that show up when you print in fdm will bother me. I know for large pieces for e.g. cosplay, I know you have to do filler and sanding but with small pieces like figurines and such better to keep using resin ?

[@millagax]

I own three elegoo machines, one neptune max 3, one neptune 4, and one neptune 4 max. The two neptune 4 works awesome with a custom cura profile, but they both has the same problem, they fail at store the z offset. It's really a pain in the ass, because I have to reset it after 3 or 4 prints in an infinite loop. As far as I can tell, upgrade the firmware can brick the printers. Other thant that, quality and speed are awesome for the price.

[@iscariotpaladin5363]

Thinking about 3d printing was wondering what programs you use in print the mask and other items

[@BraxtonSharkboy]

Would you recommend the Neptune over the Saturn? Can’t decide which one to get

[@RayZXA]

I have the issue with the leveling on my Neptune 4 plus and i even had the current set too high for the Y driver.

[@BooshmanLee]

Interested in the Orca profile, when is it going to be up?

[@IanJLennard]

I have had my Neptune 4 plus for over a week and I have found it to be fantastic. I have stuck with the elegoo slicer and have been printing at 225 degrees and have yet to see any noticeable stringing

[@UncleJessy]

Nice! Yeah, i'm not a huge fan of cura but if its working for you then keep on printing on!

[@Drakanis25]

@@UncleJessyI can’t seem to find that Galaxy Black PLA that you showcase anymore. Was on Amazon when you first used it but gone now. Do you know if Elegoo will continue to carry it or where to purchase it from?

[@ChefxZac]

I can’t find that slicer

[@IanJLennard]

@@ChefxZac the elegoo slicer was on the supplied usb drive

[@ChefxZac]

@@IanJLennard thanks

[@BBLX1C]

Great overview, I like your videos very much!! Could you probably make a video about the Anycubic Kobra 2 Max, Anycubic Kobra 2 Plus or the Anycubic Kobra 2 Pro, which are also interesting machines, but their equipment isn‘t exactly the same, but the part quality seemed to be very good, is it the same on Elegoo? The only thing that makes a difference is that the Kobras are moving on high quality linear rods, not the POM-V wheels, would overall don‘t last that long than the steel ones. I would be so pleased maybe to see a comparison! (Probably also with definitely recommendation) Wish you guys a nice week!

[@vinniesmith7455]

Weathering would be epic on the Deadpool !

[@Gw2Zoke]

Is the printer full open source? I just need some way to have a standard nozzle of some kind in this machine in stead of their odd proprietary length.

[@TimoZ992]

just ordered my Neptune 4 Plus 2 days ago :D

[@Voidmonster]

On my N4Max, I've had really, really bad stringing with Overture Easy PLA, much less with the Elegoo Galaxy Black (and their red, but I don't really care for their red -- a little too warm balanced for my taste), and basically none with Polymaker Polylite PLA. I'm running a test print now with the Overture PLA using a 0.2mm retraction and a spiral z-hop and that seems to be making a difference.

[@SteveJohnston]

Thanks for the Review UJ. I got N4P a week ago and struggled to get anything to adhere to the bed for the 1st 3 days of printing as well as a grinding sound when the bed went to the rear position during homing. I reached out to Elegoo and wound up running the firmware update on the machine and the touchscreen, which went fine after I restarted the machine and unplugged all cables It would not reload the new Firmware until I unplugged the touchscreen cable and powered it off for 5 minutes - FYI). After the update I have had no further grinding and everything is sticking to the plate (I am using the glue that Elegoo included and I am running the auto level before each print). I am having the same issue with stringing - especially on Silk PLA - it's really bad. I am looking for a Temperature Tower to print but I can't figure out how to adjust the gcode for the temp layers inside of OrcaSlicer nor have I found one for this printer ready to go. I would buy this printer again and I recommend it! Beyond the stringing issue, the prints are beautiful, highly detailed and Fast! I'm also printing at 200 - 250 MMS on average with OrcaSlicer and really happy with the quality. If anyone has any feedback/suggestions on the stringing issue or if you can point us to a Temp Tower that will run through OrcaSlicer for the N4P - Please share! Happy Printing everyone!

[@robsims6352]

orca Sliver has an inbuilt temp tower that you just slice and print (it does the temps automatically) - in the top menu go to calibration then select temperature. Also has pressure advance, flow rate and retraction tests.

[@SteveJohnston]

@@robsims6352 Thank you!! I found it and I’m going to run a test! I’m also going to try the same filament in the slicer that came with the N4P to compare against slicers. Thank you again!

[@miked4088]

what do you think about a comparison between this and the Bambulab A1?

[@crazyhands911.]

I'm hoping the firmware updates that just dropped fix my issue. I've got a little of that grinding on the homing, but more importantly, it keeps getting caught on layers and grinding/popping and then the layers shift. The Benchy file that came with it can't be altered, so I wasn't able to add Z-hopping or anything to it to try and get a good Benchy print.

[@scenic_shoots]

i bought the neptune 4 max and two days after assembly the power supply blew up (currently waiting for a replacement) but other than that i havent had any issues. looking forward to getting it up and running to really push it and print big things

[@BurntMemoriesAlt]

...elaborate?

[@is-ig4ny]

Hi! Does the Elegoo Neptune 4 Max have the same printing quality as the Neptune 4 Plus?

[@cluna92377]

That same clog has happened twice now to me on my n4m. No clue how it has happened but elegoo customer service has been amazing and has sent replacement parts for me and is trying to help me figure out how it is happening.

[@ZealousDragon]

Where does one get the Plus profile for the Orca Slicer? Noob so if I am wrong on the slicer you were using in the video, please let me know. Thanks

[@MyManRaptor]

I am the kid that bought that Groot that you made the video on. I just got an Elegoo Neptune 4 and am getting the head in a week or 2. Do you have any recommendations for anything to make?

[@nws517]

Could I make most of this stuff with the pro as well?

[@AndrewSink]

Built in Wi-Fi is awesome, right?! The Neptune 3 Plus was my favorite Neptune, but the Neptune 4 Plus is a 100% improvement. Awesome overview!

[@UncleJessy]

Not sure what wifi chip they are using but its fast & the setup is stupidly simple for your local connections

[@TylerR909]

I received this about a week ago as my first 3D Printer. Lots of "First printer" learning curves but otherwise I feel pretty justified in my pruchase. By far the most frustrating part has been lack of support - The firmware version you receive is completely random, and the only updates are available exclusively on their Discord as Beta firmwares. The Reskinned Cura profile they sent is just flat-out wrong for build volumes and other stuff. And the profile situation is pretty rough - the only public profiles, even pre-release (Orca), are Community-provided N4Max that you have to clone and fix for N4+, and then heavily tweak. Not loving my layer quality right now but I'm sure that'll get dialed in eventually. Most of my issues are "new to 3d Printing" issues; N4+ has been super solid thus far!

[@zackfolmar227]

Would love to know what changes you make to the N4Max profile for the plus! I just changed build volume and it’s doing ok mostly. Just some weird artifacting pattern going on. Other than that, not bad!

[@TylerR909]

​@@zackfolmar227 Idr specifically but lots of tweaks like default # of top/bottom walls, infill patterns/thresholds, lots of filament tuning like when to turn on the Aux fan, even turning on that there _is_ an Aux fan (I think it was disabled), Skirt/Brim settings, first-layer speed, custom priming GCode at the start of prints, etc. Also not sure about the acceleration values or max speeds. Again, I'm brand new to this so I'm mostly throwing things at walls to see what sticks and adjusting as I go.

[@thorstenmetalhead9666]

Thanks gor your detailed description of issues. Guess I'll go with another printer as my first machine

[@HoloScope]

@@thorstenmetalhead9666 definitely go for another printer company. Elegoo is basically using customers as beta testers.

[@nickholl]

how would sau this compares to the bambu mini for a beginner?

[@nobodynobody5283]

What is the correct size of the whole printer? with antenna and cables and so on? Does it fit into 59 x 59 cm closet?

[@TheDragonaki]

Use Prusa Slicer with official Elegoo neptune 4 pro file for Boat, only with that i don't have strings, i do, but like only few of them for 10 hours print. When i used Orca slicer, Orca has some settings that are not in line with elegoo printers and thats why you get tones of strings, just like i did.

[@chazhaze1580]

Adjust your retraction for stringing?

[@vmjr748]

For your stringing turn off Z hop and make sure your nozzle wipe when retracting is on.

[@masonwhite325]

I also just experienced the same massive clog and it ruined my extruder. Hope Elegoo is able to send me a replacement.

[@Bizzb33]

what is that program is yor using

[@landkpall7268]

Does this printer use open source software like Prusa slicer?

[@maximepare463]

Can you give the width of the printer WITHOUT the screen? I want to get it and not sure if it will fit, but can't find if the reported dimensions are with or without the screen. While you are at it can you measure the height? Same deal can't find the info if its with or without the spool holder?

[@silverstarr354]

Do you have a link for the Elegoo Galaxy black PLA? I can not find on their website or Amazon.

[@joshspencer1934]

where can you get that Elegoo Galaxy Black filament!? I looked on Amazon and on Elegoo and can't find it. I really want to print the Spider-man 2099 helmet by DO3D with that! Also do you have a shop in Rochester?

[@drgta6]

I bought the Max so I can print cosplay stuff. It's a sweet printer!

[@drekkis12]

can you do a darth vadar mask on this in one shot or should i go up to the max

[@Brandon-zw3hw]

Would the settings between the various 4 series be about the same other than build volume? If not I need some Orca 4 Pro settings please and thank you :)

[@UncleJessy]

in theory. I would guess because the standard 4 is slightly smaller you might be able to get some faster print speeds off it than the Plus or the Max

[@MFA_27]

First of all, thank you for your efforts, I really liked your publications and I want to buy a 3D printer. It will be my first 3D printer. I'm undecided between Elego Neptun 4 Pro and 4 Plus. In this sense, I have an important question here. I haven't seen an explanation on this issue anywhere. I would be glad if you could help me. For the first time in the 4 Pro version, a metal wheels were used on the extruder rails instead of V-slot wheels. I always saw it in the videos as a new innovative feature for smoot movement. However, in the 4 Plus and Max models, the plastic V-slot wheels are used again. I couldn't find any positive or negative comments about this subject. As you uses devices with both metal and plastic wheels, which one would you recommend? Should I buy the Pro or Plus model according this point? Sometimes it is tempting to buy the plus because of features such as print volume and wifi, but I would still like to hear expert comments and act accordingly. Thanks.

[@ogrinz_labs]

I had the same type of clog this weekend. It completely engulfed the wires from the control board so there was no salvaging the hot end. Elegoo is sending a replacement. Maybe the silicon sleeve should be wider to prevent the filament from creeping into the open cavity

[@bonzzzr]

Same. Did they send your replacement yet?

[@ogrinz_labs]

@@bonzzzr I got an email today asking for my shipping address, so hopefully it will be on its way soon.

[@bonzzzr]

@@ogrinz_labs just got my confirmation email. They said 7-9 working days. You probably got the same info.

[@isaiahbenitez8978]

@Uncle Jessy Not sure if this will help, but I know with my Neptun 4 pro I was having non stop stringing, and I just increased my nozzle temp by 5 degrees, it went away.

[@ogrinz_labs]

I got my replacement hot end in the mail today. I had the same "clog of death" issue UJ has in the video (and lots of others are having - FranklyBuilt, FauxHamnmer). Plugged it in and the temperature read -40C at power on. I checked the thermistor connector and it's plugged in correctly. If I set the extruder temp to 170C, the display shows a steady climb from negative to positive (so it's hooked up and reading the increase - it just starts out wrong). By 65C, the PLA filament I loaded it already dripping/smoking out of the nozzle. I contacted Elegoo about this latest problem. I really want to like this printer - and it was great when it was working. But I'd have to say I'm becoming very disappointed in my first Elegoo FDM purchase.

[@MMQsTacosConLimons]

Have u tried sunlu Anti stringing PLA?

[@DiavloPL]

I've tried recently orca, but got very discouraged when profile for neptune 4 was waay slowen the one from elegoo version of cura. Probably need to tune up profile, but why create slower profile then the one that comes with a printer that makes no sense.

[@daniellupton9701]

I was really on the fence with this machine, it was between the N4+ or the K1 Max.

[@luiscampos8808]

do you have a profile for this printer for Cura? I just got mine in but it is printing way too slop

[@samuelmeasa9283]

You know what I want to see done using that Galaxy Black PLA. A Darth Vader cosplay. I'll settle for just the helmet but imagine being at a convention when That Vader walks by.

[@James-xp1gf]

that's a very skeleton looking ghost at 2:55 😂

[@TheRodrigo307]

Quero saber quais tintas da para usar direto no filamento e que não saiam. Para usar no drybrush e wash.

[@CJRoe]

Where does the 4 pro fit in this lineup? Too many choices!

[@PaperMoon_Cosplay]

I'm considering switching to ELEGOO 4 max from my Pruśa and I wonder how much of a difference in quality is it...

[@tarikakkoc2226]

Hello, can you share the elego neptune 4 plus prusaSlicer profile?

[@rabbisanchez1]

Can you talk about the z offset issues

[@hightde13]

That mask almost looks like a Garus mask from Mass Effect. Now that I've said that I wish it was one. I kind want a Garus mask now heh.

[@SaultiBalldeip]

Seems like this is a common issue on all the Neptune 4 heads. They all produce an Akira moment. Still contemplating on what to get for my 1st printer ever, always seem to lean towards Elegoo but maybe I should get a Neptune 3 model instead?