$$$350Z 2JZ SWAP COST$$$

[@iyaayas5097]

Very thorough and well explained breakdown. Excited to see the final numbers when you dyno tune her.

[@StreetFabPerformance]

Thank you

[@Hippicritt]

Hey, I’ve got my 2017 370z nismo I’m working on getting ready for a 2jz non vvi swap This is very helpful. Thank you.

[@StreetFabPerformance]

Thank-you I'm glad I was able to help. If you have any questions you can shoot me a massage on fb or ig

[@an2855]

This is a perfect outline

[@andrewsapp856]

Nice video. Plan on doing this to my g35. Gotta save up I bet it’s going to cost me 15-20k in 2021 with current prices

[@StreetFabPerformance]

Thank-you

[@onyx5301]

update?

[@AlanYenniel]

update?

[@aidenarnoldy8037]

update?

[@andrewsapp856]

@@aidenarnoldy8037 sold my g and bought a 135i m sport. 6 speed manual. With just bolt ons I have 400whp. And the car was only 10k so cheaper than just the swap

[@masonjarhillbilly]

Honest assessment. All the little crap adds up fast.

[@StreetFabPerformance]

100% true

[@Blake-ld7mx]

This looks clean man..and good price range. Other vid dude didn't have much of a price range he just kept running his credit trying to fix fcked up problems

[@Timfield.42]

Im in the process right now of making up my parts list, paying a shop to do this swap for me, i just need to supply the parts. Trying to get just the bare bones parts just too get the car started and driving so i can drive it back home. I can do all the fancy stuff myself later on down the road.

[@Twansum]

Send me the list when you have it

[@rickqueen65]

Thorough... good job my g.

[@zzbk2]

question, do you need a custom harness? what if you dont get one custom and use the harness the engine comes with?

[@StreetFabPerformance]

You can make your own but you need all the pin outs for both cars

[@philipholman9898]

Any plug for that swap here in Florida. A good shop that will do the right work?

[@StreetFabPerformance]

Hey- I'm not really sure who to go to in Florida.

[@philipholman9898]

@@StreetFabPerformance I'm really set on doing this swap. Everyone says go LS if it's gonna be a swap. How much more work is involved. I'll be hiring it out I'm just curious. I'd rather run that 6 . Can you still have air-conditioning?

[@StreetFabPerformance]

@@philipholman9898 its not more work - it just depends on what engine you want to run. Yes you can still have AC.

[@mikhailnadjkovic3916]

>_> need that Mishimoto plate for my oil cooler that I haven't installed yet 😁

[@StreetFabPerformance]

Never know you might be the winner!!

[@whoisluu9126]

I’m trying to get everything I need to swap a 2jz into a 350z , would you recommend building a 2jz ge or just buy a gte?

[@StreetFabPerformance]

Now days it's almost cost the same to build the ge

[@ashuqmirzaie975]

I need to change my n54 to 2jz can you tell me how much it will costs and you can do that ?

[@Blake-ld7mx]

I watched a vid few days ago dude with a yellow and black beat rocket bunny 350z said he spent over 30k on his 2jz swap. He did it himself but everything looked like sht and it sounded like it was about to blowup. Not to mention all the issues he was having with it.

[@fyzikal5]

can you link the video

[@Blake-ld7mx]

@@fyzikal5 his KZbin name is Cam Rbz.

[@fyzikal5]

@@Blake-ld7mx knew it. it’s really a mess dude. his wiring harness is a rats nest dude there’s so much stuff he could’ve done right but he tried to be cheap and end up paying more and more. RN he has an upgraded diff when the stock lsd can handle 600hp

[@Blake-ld7mx]

@@fyzikal5 I thought it was just me😅 but when I first saw it I thought man...should a 2jz swap look that bad

[@fyzikal5]

@@Blake-ld7mx looks like if Mad Max got into JDM

[@Drifty.350]

I wish I knew how too do a engine swap I would so do this

[@StreetFabPerformance]

Bro you can do it! It's not complicated. If you need help I'm here for you.

[@Drifty.350]

@@StreetFabPerformance yesiir I’ll let you know when the time comes

[@971pokemaster]

Which manifold did you use from cx racing ?

[@StreetFabPerformance]

The one with a thick face

[@ashe1928]

same for a g35 2004?

[@StreetFabPerformance]

Yes

[@bp5462]

Are there Any shops that will swap your car for you or is it basically up to you to find the parts and get it done

[@StreetFabPerformance]

Yea performance shop will do it for you. Where you located?

[@bp5462]

@@StreetFabPerformance Virginia

[@washcloth5616]

@@bp5462 u find any shops?

[@bp5462]

@@washcloth5616 my great uncle actually did it for my cousin he builds cars now and I had no clue he now owns a 6.2 v8 swapped 300 zx

[@kberlinquette]

I was guessing 21k... SO close

[@btookz]

Where you able to keep the A/C

[@StreetFabPerformance]

Yes I kept mine

[@jesusherrejon2684]

hey man ik you probably busy lol but i need help with my wiring and sensors i’ve never done anything liek this but if you could help me out or recommend a video that’d be amazing

[@StreetFabPerformance]

Yes hit me up via email [e-mail]

[@speadfreakmax]

My car made to KZbin. Atleast a picture 💪💪

[@StreetFabPerformance]

Yes sir. I was looking last night trying to tag you. How have you been?

[@StreetFabPerformance]

We should do a video on your car? What you think? Have you done anything about your rear fenders?

[@insanity7853]

How can I speak with you buddy

[@StreetFabPerformance]

Email me. [e-mail]

[@darthpand]

I am a 350 owner and want a 2jz lol

[@StreetFabPerformance]

Nice bro. Its so with it!

[@tehpwnzor1337]

I know this is over a year old video, but I just found it the other day, because I'm wanting to buy a RX-8 and 2JZ swap it in the near future. One thing I noticed is you didn't mention the transmission. Did you use the stock transmission that came with the motor? I know from doing a some research myself, the transmission won't work with the RX-8 rear end, so I'd have to find another one. Also I noticed you said, you picked up the motor from that depot in Ohio in 2019 for $2550 with the transmission too. I went to their website and they have one in stock and guess how much they want, $6390...what a fucking rip off 😂 so overpriced. Guess I'll have to talk them down, and just get the motor itself, don't need the transmission.

[@StreetFabPerformance]

I used my original transmission but then upgraded to CD00A. Yea engines are now very expensive.

[@ThatBustedVQ]

The prices of even a 1JZ-GTE IS like 4.5k now 😢

[@StreetFabPerformance]

I know bro it's crazy

[@baylabay542]

I need your help

[@StreetFabPerformance]

Absolutely. How can we help.

[@baylabay542]

@@StreetFabPerformance my son was working on a project car just like that and he passed away. I know nothing about cars but I want to finish what he started. [e-mail] please help me put the pieces together

[@StreetFabPerformance]

I have sent you the email

[@baylabay542]

@@StreetFabPerformance I don’t see it. I checked spam too.

[@StreetFabPerformance]

@@baylabay542 its from [e-mail]

[@JuanMorales-lt6sv]

Can someone do the math please I’ve been waiting for the full price lol

[@PassioneCarrozzeria]

Hi friends, link kit engine swap ? Thanks

[@StreetFabPerformance]

collinsadapters.com/swap-kits/2jz-gte-1jz-gte-engine/2jz-to-350z-370z-stage-5-kit-mounts.html

[@StreetFabPerformance]

You can choose any options

[@PassioneCarrozzeria]

@@StreetFabPerformance thanks 🙂

[@zyou8er]

Now they’re $7k just for the engine.

[@ricardohay4653]

We're in the world u pricing the engine lol

[@zyou8er]

@@ricardohay4653 huh 🤔

[@MatTheDragon]

👍👍

[@bikotheanimator6169]

Too bad I am poor for anything.

[@StreetFabPerformance]

You can do it

[@bikotheanimator6169]

@@StreetFabPerformance I wasted ten years going to school for a pointless bachelor's degree. I graduated in December 2018, did an amazing Summer internship in 2019 a the most amazing and beautiful place I have ever been to, and now 2020 came and I had no job and I did not make any money. I should have never went to school and I should have never listened to my parents who told me to focus on school. Here I am stuck with them in a boring state. I should have started a serious youtube account back when monetization started and dropped out.

[@StreetFabPerformance]

@@bikotheanimator6169 im sorry to hear that. I hope it works out for you getting a job and all. I also wish I started the channel years ago. Keep your head up and keep moving forward no matter what it takes.

[@speadfreakmax]

@@bikotheanimator6169, get your cdl and come work for me. You will get an avg of 3500 a week.

[@OMGERRORWTF]

@@speadfreakmax my dad has a CDL he worked as a big rig operator for years 3500 a week might motivate him leme ask

[@mrgrow2417]

this stuff is soooooo over priced .