350Z/G35 Clutch and Flywheel Kit Install

Join Z1 Aaron as he walks you through a step-by-step installation of the Z1 Clutch and Flywheel Kit.
Z1 clutch kits are available in various clutch types, friction discs, and flywheel types to make the perfect setup for your ride.
Put together your perfect kit at z1m.io/cfk

[@thezombino6119]

Y'all made it easy to understand. Great video

[@seanmetoyer2016]

Love the install videos

[@angellugo3588]

You have the right tools 👍.

[@dannykim6218]

I don't even own a z no more and I'm still watching your videos haha

[@itskidkelly]

Do NOT use a socket to hammer the bushing in. Get a piece of pine and use that. These bushings are made of brass- or copper I’m not too sure- but a soft metal that’ll deform when impacted with a harder metal. The shaft of the transmission might not go on properly, or at all if it’s too mushed.

[@zn_paii]

for sure, you risk mushrooming the surface area of the bushing..

[@mattman20132]

do you need to put thread locker on the flywheel and/or pressure plate bolts? If yes, do you use blue or red?

[@Infinitesyndicate.]

Where did u get the sliding hammer from?

[@blank536]

I can’t get the fly wheel on so easily what am o doing wrong

[@toumoua7224]

How much torque and hp will this clutch handle?

[@GeneG-wk2mz]

I need for 2007 3.5 se 6 speed??

[@therealhan21]

how do you torque when the flywheel is moving?? also you can use a wrench to the wheel from moving when tighting it

[@finnsouthey6908]

Get a 19mm socket and bar on the crank shaft pulley and get a mate to hold it.

[@loudasses8528]

How far is to far

[@gomoglo]

Does it come with new flywheel and clutch bolts? And this is all the same as the 370z/ g37?

[@blackmesaresearch2]

Just ordered a kit from them, it does not come with bolts. They do sell OEM bolts at a decent price though.

[@rol1in0n20s]

My flywheel isn't slip fit to the crankshaft like that, P/N 41018 onto a 2005 VQDE... doesn't seem like I should be hitting it with a hammer to get it on

[@blank536]

Same here let me know how you got it on

[@blank536]

Trying it now and I can’t get it on

[@jellofuel]

Good video, though I'd add loctite to the flywheel & clutch bolts so they don't rattle loose over time.

[@ZeroFX32]

I was thinking the same thing, either medium strength or permanent would be OK

[@vciq]

They obvi not pro

[@blackmesaresearch2]

@@ZeroFX32 Medium only. Clutches dont last forever and you might be the next guy working on it.

[@dkhan22]

I thought he was going to say to wear eye protection for the clutch dust. He was too worried about the floor instead of his eyes.

[@PotentialGaming]

lmaoo fr

[@pacdman3993]

Just hammer it un but not to far and then dosnt say or show what to far and npt to far 😂