350Z NRG Quick Release and Sparco Steering Wheel Install W/ Horn & Cruise Control

[@jimmywilliams866]

This is way more details that I have ever heard or seen in anyvideo out there. Amazing job. It makes me want to do a steering wheel mod now. Keep the vids coming bruh.

[@antonypope7909]

Good job. The one reason I didn’t go for a quick release and new wheel was because I wanted to keep cruise control. Now you have solved my problem. Will be doing mine soon.

[@ScylockeX]

Whoa, someone who speaks clearly and thoroughly without constant stutters. You're a rockstar dude. Looks like you haven't done videos in quite a while. That's a shame. You're way better than 97% of the garbage out there. Hopefully you're finding success outside of KZbin.

[@erwincatapangan9070]

Man this video is super helpful!! I installed my quick release last summer and I wanted to keep my cruise control but didn't want to go through the trouble on figuring out how to do so. You made this process seem so simple! I'm definitely going to have to redo this install just for that! Love your work man!

[@D3UC3]

Found this video 3 years after it was posted. Still the best wheel / quick release / cruise control guide video. All these steps worked for my Lexus too :)

[@tiansanderson9643]

I dont think you needed to change over the harness to keep the cruise control and radio control. I think the extra connector is for the base model z.

[@JUNEORJUNE]

where did you buy the parts bro, went to NRG site but there's shopping cart to buy

[@potatosalad6524]

This is actually a awesome video. Went and showed through everything I wanted to see and how to do it. Just earned a subscriber

[@matthewvaughn9026]

Best steering wheel video out there, you walked through this great with the cruise control and everything else

[@static_Tricolor_camry]

Thanks for showing us how you connect the horn. It's rare to find a good video without people cutting up their OEM harness wire, for the horn. I didn't have to do that when I installed an Aftermarket Steering wheel on my Accord. I lost my Red SRS resistor when I was clean my car, so my Airbag light stays on. I need to purchase one, so I can turn that light off. My horn works as well.

[@carlharvey7098]

Your videos are fantastic and so informative

[@tuckerbmx]

i made my cruise work on my 08 wrx its cool knowing u made it more than just aftermarket wheel, u put some effort into keeping some luxuries of the stock wheel lol

[@ryanscanlan9875]

Fantastic content. You def have style. Perfect wheel choice. Being a slight dish + quick release, is it too close??

[@Top-G35]

Good informative video and no nonsense filler and people acting stupid 👍🏾 up

[@adamdisalvo9247]

Love the video! I have one thing to say don't ever use a torque wrench as a breaker bar all that money on a torque wrench might as well buy a breaker bar to . A Torque wrench are not made to be used as a breaker bar.

[@RjBm26]

Awesome. Thanks for making this video

[@manuelcruz4824]

I guess u got me into a new proyet for my z... Really love the way it looks and your tutorial is spot on!👌

[@skatetastic8]

Nicely done! Love how you kept the cruise controls! .

[@mrunboxer7657]

It seems the green cable from the original harness is for the horn. If you wanted to retain both the cruise control and music controls, can you just remove the green horn cable from the original harness, and swap over the extended black horn cable from the new harness?

[@hardhitt3r410]

My boi back!!

[@faintz5662]

I like he didn’t bother to show how he disconnected the black part

[@venomousninetails]

Thank you, I needed this this video so badly to make sure my horn and cruise control work. So its definitely the green wire on the clip.

[@SunkissedElohim]

Super appreciate this video brother. This was very detailed and informing. Well done. 👏👏 I have a 2014 370z & there's a second connector slot on the base of the steering column across from the slot thats meant for the steering wheel controls. Q: Are you or is anyone aware off what that other connector slot is for?

[@marcosruiz5415]

Do you know the website for that kit? I also want to keep the cruise control but I cannot seem to find the kit that has the wiring harness to be able to use the horn or the cruise

[@iPOWNSCRUBS]

Bro wanna do my car too? I have my momo wheel chillin and still havent gotten it installed

[@iTerencexD]

Could you have just left the oem wiring system instead of swapping the pins and have buttons still work the same? Also do you know where to get resistors for air bags if they didn’t come with your set of stuff. Thanks I’m advance

[@med8tor1]

You should have indicated how many ohms of the resistors and show a detailed way of installing it. It will help a lot for newbe's like me,

[@craigsawyer8368]

Best install video I've seen for any hub well done.

[@Jay_DM]

Airbag light still coming on, same exact setup and the resistors idk what to do I’ve tried the turn off and on reset nothing works tho

[@eddiemontes2774]

Did your cruise control harness wiring ever wound up on the hub or clock spring behind the hub and prevented you to go from full left and right turning wheel lock?

[@NewYorkBattleCat]

Can u plz make another video i ended up in the emergency room with the steering wheel around my neck.

[@QUAIONTOP]

G35 guys like this 😏

[@isbautista59]

Could you use the stock wiring harness/plug for the cruise control and horn can’t seem to find the grey plug you got

[@jesusyedra4521]

Quick question how do I take off the piece that has all the wires on it and just install the hub adapter

[@rafarios1548]

this might be a dumb question but would there be any lights on if i dont want to keep my cruise control?

[@anywaywon8903]

Did you just cut and tape off the wires for the music controls? I want to do this but if I got to re wire/splice a few together I don’t feel comfortable on my ability lol

[@13Performance]

If the steering wheel I purchased doesn’t have a horn button, do I delete the ground wire for the horn on the cruise control conector?

[@SoFresh786]

hey man great video, i have a 370 and it was pretty much identical , my questions arefor the cruise control and horn. my horn doesn't work and i tried doing what you did, and for cruise control i attached them in the right color pattern when i transferred the wiring and snipped the pink and yellow wires that were attached to the radio, but still no luck working :( and where would you buy the female connectors from?

[@juarez-doblev6804]

What can you use if the airbag screws accidentally get rounded from the middle Nd no longer has grip 🤔😢

[@omegafocus]

Yeah, I'm about to do this on a VW GTI MK5 2007. The center bolt requires a M 12 Triple Spline Socket and there are some minor variances, but this video will get me there. Thanks, Steve

[@jesusyedra4521]

How do I take off the original hub adapter from my car and just install the nrg hub adapter

[@jesusyedra4521]

Hey buddy good afternoon I wanted to know where can I get the quick release steering wheel for my 2018 nissan altima amd is it the same procedure for my car as well as how u did urs

[@jaelinobiniana8420]

Hows it going? Just wanted to ask, above your radio head unit, did that come with the car? Or did you have that system installed? I'm guessing its a nav? But this was a super informative video! Thank you!

[@SiegeStyle]

Jaelin Obiniana 👋 Hey. Yes that’s the factory Nav system. Thanks for watching 🙂

[@NizmoBeazt]

Awesome install!!! Very informative. Thank you!

[@angama69]

A Nice Demonstration On this Quick Release Package. Very Helpful Indeed. I Need a Shift Knob , However My Shifter is in The Steering Wheel Column. What do you recommend. From NRG?

[@judah0471]

Excellent...........your explanation of this install is excellent thankyou for time and patience !

[@mikespeed3928]

Could you kindly share the link to the gold steering wheel bolts/screws? Thanks

[@olegg8444]

nice tutorial! do you think I could do the same with paddle shifters?

[@Jesuswalkss]

Just installed my quick release setup with out the cruise control. Ive noticed that my rear view camera has stopped working unfortunately, have any ideas what i could have caused it?

[@FIREZ34]

You have any buddies that did the cruise control like that for a 370z?

[@Synister.Sneakers]

Hey man! nice vid! what if i just wanted the horn , just the horn without the cruise control would i just keep the grey connecter and thread it through?? if im wrong pleassse tell me how to do it thanks!!

[@carlosd.2353]

So if I don’t want to get rid of none of the buttons can I use the same harness or do I still have to transfer all the wires?

[@GusBus528]

When you take the stock wheel off and add the new one did it make your air bag sensor on your dash go off? Because if so that would be annoying

[@iTerencexD]

Gus gustavo that’s what the resistors are for. So the air bag light don’t go off

[@mattlake727]

When I installed my NRG setup my horn dosent work so I'll have to take it apart and see if there is any other wires cause mine didn't come with the horn connection like yours mine just had the 2 air bag wires

[@brooklynsnowman8427]

Brother I did step by step what you have done my air bag light came one please help

[@samson_BNR32]

i have a base and want to get my car tuned with arc features (you need cruise control to go through the maps on the tune) how would i go about adding cruise control? just find the unit and pretty much plug and play after that? or is it a lot more complicated? wheels and everything looks amazing brotha

[@drift240sx9]

I just installed my nrg hub and quick release with a grip royal wheel but i had to put that spinning think with the white plastic(i think its the steering wheel sensor)thing off to the right so my steering wheel could be straight but now my vdc and slip light stay on can someone help me

[@SaiyanVisuals]

My horn isn’t working 🥺 I wired it the same way and nothing

[@Ternesio_Terys]

still a great video :D

[@nathanshields3538]

The best.

[@bluevigilante4577]

What setup would I need to buy for my 2013 nissan altima coupe

[@CarlosHernandez-jg4yu]

Did u buy the steering wheel on amazon??

[@racj2011]

Ok so I have a question. I bought a car that had the nrg setup like yours and a week after having it I decided to take the wheel of to check it out so after I put back on I've noticed now my airbag light flashes any suggestions as to fix it

[@Man_One]

Great video

[@crank218]

You still got full column tilt motion? May be a silly question but I drive a silverado and a Tahoe... I assume you do right?

[@SiegeStyle]

Absolutely. Still have full tilt control.

[@powerstrokin6.752]

Great video man

[@TheArmed_Barber]

Where did you get the quick release from, cause I got mine from amazon and it did t come with the wiring harness for the clock spring

[@elevateproduction2697]

Great job , will it be the same thing for the g35 sedan or will it change

[@nickwinsor4402]

do the air bag relay come with the kit???

[@LuiDineroo]

I can’t the wires out for the cruise control🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

[@JamesLikesDonuts]

nice video man! Super helpful. One day I'll do this to my Z and forsure this vid will help

[@lancesantos2249]

nice steering wheel

[@F30caleb]

I know I’m 3 years late but I’m having this problem to this day.. I did everything you’ve done and my horn/ cruise control do not work at all.. but when I lock my doors with my key fob the horn beeps just fine

[@F30caleb]

Is the clock spring is it the plugs infront of my brake or is it the actual cruise control itself I need help

[@cold.rico4life]

Hey man, love your videos, very good on the tutorial! do you perhaps have the list of what you bought, i would like to get the same for my car ! Thank you!

[@cold.rico4life]

?

[@PhilJue]

I know you posted this about two years ago but hoping you respond. With the cruise control do the wires ever get caught or taught at full lock? Best instructional video for this. Thanks man~!

[@SiegeStyle]

No sir, that’s never been an issue. Still running this setup and have no problems. Thanks for watching!

[@PhilJue]

@@SiegeStyle awesome! That was my only concern!

[@Top-G35]

That’s a really clean install.

[@fernandodasilva8741]

I need help for a 2007 honda civuc can you make a video about it pls. Tanks

[@beye]

Can I re use the power clip from my original steering wheel ?

[@giacomofalchi6458]

Is the short hub universal?

[@social2143]

Will it give you a air bag light?

[@alvaropalacios8934]

Are the wires for the cruise control the same for a 05 g35? Anyone know?

[@kingsavage7958]

Can we get the link of everything you have

[@kamalakeel]

Thanks for the great video man. When you install the resistors to the airbag connectors do you push down those black tabs again or do you leave them in the open position?

[@SiegeStyle]

Kamal Akeel No problem glad it helped! Yes push the black tabs back down. :)

[@alecmccammack]

Where did you purchase the bolts?

[@oldirtydave22]

good job bro!

[@potatosalad6524]

Can you give me the links to everything in the video plz🙏 even that security screw thing

[@ssgbasherttv5071]

Where did u go to buy the steering wheel and the hub and the quick release because I’m to do a custom steering wheel to my car

[@SiegeStyle]

Julian Smythe Amazon

[@Maniak13Killa]

Hey bud. Where did u get your coloured hardware from. I have the net quick release and sparco wheel as well . This vid was perfect for me

[@SiegeStyle]

Dustin Dickson Ebay :) Glad it helped

[@andreaslang2954]

And another great Video from you, keep it up i really enjoy watching! Since im also giving my interior a slight rework i wonder what size your tomei shift knob has? Im not sure which lenght i should pick and yours look just perfect to me. Lookin forward hearing from you. Greetings from Germany 😊

[@SiegeStyle]

Andreas Lang Thanks man! I'm using the long version of the Tomei shifter and I love it. 👍

[@andreaslang2954]

Alright then i know what i have to do 😁 thanks alot!

[@FranklyFrankie94]

I assume you could have transferred all the pins and also kept your music controls?

[@SiegeStyle]

Francisco Figueroa Indeed you could!

[@FranklyFrankie94]

Thanks man. Appreciate the quick reply. Looking to do this mod when I get some extra money

[@SiegeStyle]

Francisco Figueroa Yeah man one of the best mods to make! Good luck 👍🏻

[@AlteredAutomotive]

Great video this will help a lot when my wheel/hub come in!

[@Jonteee]

What model short hub is that?

[@jxelll6640]

where you got the bolts from ?

[@luinoids]

hi can you please let me know, link the place where you purchased the gold bold? thank you

[@luinoids]

*bolt i mean

[@uliseshuang7040]

what kind of shift knob is that?>

[@hardhitt3r410]

Where you at my boi?

[@ripper021_py]

The little white plastic knob doesn't control the steering, the splines do

[@lukeculin2010]

This was such a grate video so much information on how to install. Grate job 👍👍👍👍

[@conzmoleman]

great* great*

[@angama69]

A Masterfull Presentation, You Helped Me Plenty, Hope to watch your next video.. Thank You So Much.

[@vaughn1691]

how do u take off the wheel without your horn ripping out ?

[@Jake_Productions]

it is just a connector you unplug. the connector is located behind the airbag. the wires have slack so you can access them prior to fully removing the assembly.