MAKE MORE POWER - 350Z / G35 CZP BIG 75mm Throttle Body Install

[@lukasethan6429]

I’m an aircraft fabrication guy became a plant manager now runs his own business. Your mistake proofing is awesome. I hate that other manufacturer, So nothing but love

[@fatjaysgarage]

I wish more people did dyno tests

[@ubiased23]

Good video and with a lot of details in regards of the installation. Wished you have provided more info about the before and after throttle response.

[@philipholman1713]

My plan is to bolt on as much as possible , the things that will remain after a Jim Wolf t turbo kit

[@dabitat]

definitely going to have to get one of these kits for my VQ35DE S13 swap, I'll make a video too.

[@SteelLake]

Did you ever end up getting this and making a video?

[@muasboy]

Very clever adapter. Mad props to czp

[@BigBoyz33]

Love the Joji instrumental

[@ShotoMasters]

No stats on improvements??

[@Mattietee3777]

Just got mine yesterday for my 2004 G35...Thanks!

[@newmanvlogs9435]

Matty Tee how is the difference

[@icybirdman614]

My man’s JOJI better be ripping it with a TT g35 coupe

[@stealthg35infiniti94]

Did you bore the other side of the stock Plenum throat? Otherwise I could easily see restriction. A 3in intake (76mm), to 75mm Throttle body, to 70mm Plenum throat opening. IMHO, the Plenum throat should be ported close as possible to 75mm without affecting structure integrity.

[@ryanbless3970]

@@stealthg35infiniti94 that’s what I did on mine. I port matched it and runs strong. Before it was lacking, probably causing turbulence in plenum.

[@svoncampe]

If the diameter of the intake tube, in this case the CAI by Injen, and the upper plenum's neck remain the same diameter, what is the gain in a slightly larger throttle body? Wouldn't the intake tube - be it cold air or otherwise - as well as the plenum's neck have to match the 75mm in order to be effective (or the throttle body's 3 1/4" vs 3" diameter)? Thanks.

[@FierceSkatin]

Just a money grab

[@Aeneas137]

the additional 5mm causes the blade to more closely match the size of the tube ID. so yes you're better off with a bigger tube but unless you want to tune it, screwing with the MAF tube size requires tuning.

[@svoncampe]

@@Aeneas137 Thanks. I did end up getting the 75mm throttle body along with a 3.5" intake, cams, and a revup lower plennum swap. Along with all other mods the car already had the (conservative) tune yielded 290whp at 7k maintaining power all the way up to 8k RPM. I'm happy.

[@g35tho11]

@@svoncampeany videos ?

[@Thats_X_]

I know this a few years later. Just curious did you guys also cap off the coolant port coming from the pipe that’s below driver side head. Also the coolant port that throttle body connects to on the other side?

[@NVhim03]

I might do this some day soon to my 04 DE, nice music too BTW. The Rich Brian tune is one of my favorites this year.

[@angelisalive]

Was there a check engine light ?

[@SpeedCultureStudios]

Definitely looks nice.

[@DubaiCalisthenics]

Hello, will it fit if I already purchased from you Kinetix Velocity Monifold and Injen long cold air intake, I'm afraid it will push CAI too much to the side and it will touch something around!

[@mosthated8186]

What about the relearn process??

[@shootunderpar4736]

Isn’t the 75mm throttle bodies from the VK45DE? Lol just buy one from the junkyard

[@nicktunesnemesisperformanceINC]

Why not use the water necks on the throttle body instead of blocking them off and looping the coolant hoses ? Just curious

[@Diac13]

Because warming up the throttle body is a useless function unless you have extreme cold winters. Want that area to be as cool as possible.

[@manuelturizo6552]

I suspect it’s similar gain as the NWP, looking at NWP dyno ofc there is gain up top, but if your peak power is at (example) 6,200RPM and anything after that it’s less then peak power, why would I want to shift after my peak power RPM when I’m making less then peak power. 😂 did I explain myself?

[@jhernandez2199]

Hmm i think because even after peak power your power is still higher than if you shifted into the next gear does that make sense?

[@wolf-tw7ee]

Why by pass the coolant lines of the new throttle body? Is there a problem if connected to the new throttle body?

[@boboheho]

Can you put your estimated additional HP that the throttle body adds?

[@lilchris649]

The beat @ 2:20 was tuff

[@Mensaje22]

Ain't the manifold airintake hole still the same size ? So how is the bigger one better? What's the difference between the throttle stock and the bigger throttle one? I would buy kinetics but I would buy the new one that come out with to reduce weight and every weight you reduce totals up to the final weight

[@idokwatcher2062]

Bro engineering, bigger is always better.

[@luke_sw7657]

Will this work without a tune or will i have to get it reflashed?

[@iamrambo__7656]

did u watch the video

[@andrerose6897]

Could you guys make a video of a 2007 or 2008 Infiniti G 35 heater core removal video from removing all the dash all screws bolts

[@Conceptzperformanceczp]

Unfortunately we dont have one to work on. If we ever get one in the near future we might but not anytime soon

[@andrerose6897]

Awww.. man I just don’t wanna mess anything up if I open up mine lol well thanks though

[@deexiong8164]

Do you still need to do idle relearn?

[@toomanytums]

Im assuming this 75mm TB kit and the cold air intake would also fit into a 2004 Infiniti FX35 since it has exact same motor and is built on same chassis?

[@Conceptzperformanceczp]

we have not tested it, there might be some clearance issues that we dont know of. For the most part you should be set

[@ghostrider852]

I heard after unplugging the throttle body to either clean it or change or bigger one you gotta do the throttle body relearn? Can you verify? Or is it just plug & play deal?

[@Conceptzperformanceczp]

if you look in the comments we have answered this a few times more in depth. But the TLDR is you don't have to if your car drives fine. If it acts up, then yes, do a relearn

[@ghostrider852]

@@Conceptzperformanceczp sorry, when i made the comment, the other comments was not loading for me :o Thank you for replying back though :)

[@Conceptzperformanceczp]

@@ghostrider852 it's no problem at all

[@theilest33]

Does this work with a Nissan Maxima

[@HatsuneM1ku01]

Will this paired with a plenum spacer help gain even more

[@NasdaqManiac]

Indeed it will. Not crazy amounts tho.

[@edgarg353]

Hatsune miku 01 my question being so I bought both of them I’ll be here maybe in 2 weeks or so for an update after I get a tune.

[@tokyonipples1335]

Edgar G35 tell us the news bro !

[@StoneCoolds]

About 5hp xD, there is a video with a full bolt ons 350z DE, plenum, headers, exaust, TB, electrical, etc etc etc, final result? 285 whp.... 350z 370z, are just bad at gaining power, just leave it stock or go with FI and deal with all the troubles that comes with it xD I personally have mine stock, its a fun and cool car, but for real power i went with Mercedes AMGs , tons of power stock and with just a few bolts on they become total beasts, and they hsve the plus only real car enthusiasts know them, so no 16 years old kinds in civics reving at you at every single stoplight xD

[@oa1583]

Any check engine light if not tuned

[@QSavage]

Do we have to top off the water necks? I have a 2004 g35coupe and I had a friend connect my coolant line up to it

[@CosmicV35]

Joji and rich Brian beats go hard

[@MikeMinervini]

are there power comparisons before and after install?

[@brianbrackett5917]

I'm looking for that as well

[@infinitig3549]

If you get it tuned after this install yes you getting 20hp there’s a video on KZbin the putted the car on the dyno stock throttle body then they switch to 75mm throttle body and yhe gain is 20hp

[@jhernandez2199]

@@infinitig3549 lmao not a chance 20hp more like 2.0 hp

[@nutdiego27ify]

Since i already buy the 75mm throttle, plug and play connector from nwp. I was thinking buying czp throttle adapter, my question is are they work together. I get the jerk when ever i let go gas pedal is this possible to eliminate that jerk if i change my throttle body adapter.

[@Conceptzperformanceczp]

you might need to do a throttle body relearn. Have you done this?

[@godlikehd2398]

Where do I get the 3.25” - 3” coupler

[@spencer82rocks]

Why just make it one instead of two throttle body adapter ,love the silicon tube tho

[@robbiefisher1]

Would you recommend this for a 03 350Z with Turbonetics single turbo kit?

[@pat-1235]

Do you need to do a throttle body relearn after installing, I don’t want to mess anything up by starting it improperly or driving it

[@Conceptzperformanceczp]

it is not necessary but should be done at some point. the car will start and drive just as it should. To gain the most power out of this modification, going in for a tune with other supporting mods is ideal

[@pat-1235]

Concept Z Performance my engine Mod list Invidia Gemini catback exhaust, test pipes, cold air intake, and a tune already on the car, would you recommend not doing a throttle body relearn still

[@Conceptzperformanceczp]

@@pat-1235 With the different modifications its hard to say how your car will react. If you feel the throttle is acting weird once installed it wouldn't hurt to do a relearn. Some situations it might not be needed, but whether it feels fine or not doing a relearn would be ideal

[@icemanvq35]

Will this fit on a QX60? It’s the same engine as a G35 or 350Z lol but it’s front wheel drive.

[@Johnkiller2]

Yes as long it’s a vq35de you’re good

[@KK10027]

What is the advantage? How much gain?

[@julianlupo2745]

Would this be okay to install on a turbo car without getting it tuned after?

[@uptownsamcv]

would you recommend porting the intake manifold and adapter so it's all size matched?

[@dad6896]

do you have something like this for NA z32??????

[@ramiroacevedo8082]

Can you put other kinds of intake on this throttle body

[@1112223333111]

not a complete kit if it dont fit the oem air pipe.

[@horizonview1850]

Ohh the o ring after the oring with the o ring after the 0 ring? Oring oring o ring say it with me

[@StSour94]

Hi! Due this is a VQ35 DE, if I buy a nissan pathfinder VQ35, that is the same but with a different multiple admision, is posible to install this aftermarket admision and also the throttle?

[@CarterLambert-yp8ko]

Just curious did you end up finding out if the throttle body from the vq35 nissan pathfinder bolt right on too the vq35de engines?

[@bobbyholmes4586]

Waste of money, increasing the TB does nothing. Take you're money and throw it outside and shut the door that's what you are doing when you buy a bigger TB

[@rickqueen65]

Bro if you all could adapt one of these to fit the OEM 2JZ VVTi manifold that would be pretty legit for those of us running 2JZ Nissan/Infiniti swaps.

[@DARKWoLF52297]

What’s the difference between this one and NWP? Your price is lower which is good 👌 but I just wanna know if the throttle bodies are different.

[@joshuawiggins7487]

Motordyne_350z the difference is the price

[@luistovar2234]

I have a07 g35 sedan which has dual intakes what would be best to do 1st for more get!! ? Any recommendations

[@ryanscanlan9875]

I have the same HR engine in my 07 350z. Exhaust, big CAI's (admin tuning has the biggest) and a tune are the biggest gains. Smaller further gains really adds up $.

[@hyperbiker613]

Can i ask what you did with the coolant lines that use to run through the stock Throttle Body?

[@Level_Up_Nation]

There is a delete kit you can get for that, says adds power, but it doesn't, just cleans up the area and you lose cruise control.

[@hyperbiker613]

GRAND HIT I ended up getting a 90 degree fitted barb that connected the coolant lines that use to go through the throttle body. It was a simple process

[@AHK0]

@@Level_Up_Nation Where do I get delete kit from?

[@arturo9002]

If i have a throttle body spacer on my car already should i remove it after this throttle body install or leave it on

[@Conceptzperformanceczp]

We don't recommend throttle body spacers on these vehicles almost at all.. but in this case I would definitely eliminate it in place of the adapters

[@arturo9002]

@@Conceptzperformanceczp thanks i just ordered mine last night

[@bothijssen1809]

@@Conceptzperformanceczp why not?

[@payang1807]

I just put my CZP throttle body on, and it's making this hissing or high pitch noise from it. Is it defected?

[@Conceptzperformanceczp]

pa yang sounds like an intake leak. Make sure all the O-rings are well seated and everything’s tight.

[@plzstandstill5120]

On to the junkyard I go to search for 1

[@dennisgrzesek5864]

How much extra horsepower do you think that will give you just out of curiosity definitely like to get a setup for my Z

[@notahuman369]

1

[@kempowarrior]

@@notahuman369 🤣😂🤣😂🤣

[@kempowarrior]

On a Naturally Aspirated Engine I don't see it getting more then 2 to 5 hp but I could be wrong.

[@notahuman369]

@@kempowarrior That'd be about the upper-upper limit after a tune lol. I know because I'm running the same TB kit 🤣 I definitely noticed a bit more throttle response though.

[@alonsodelatorre423]

Do you sell the plates separate?

[@Conceptzperformanceczp]

yeah, check it out right here. conceptzperformance.com/czp-75mm-hitachi-throttle-body-straight-adapter-vq35de-nissan-350z-infiniti-g35-czp-75-adpt-kt_p_32077.php

[@wilhelm7451]

can you do this with the plenum still in the car?

[@BenWesChannel]

yes

[@tomb9566]

How much extra hp?

[@indycarfan11]

I can’t get over you 🎶🎶

[@johnjeff370]

Does this set up fit on a 07-09 350z

[@pv1nny714]

i dont think so

[@philipholman1713]

Do you have to take the intake off?

[@braygensmith2341]

Yes

[@whoa2488]

Would be nice if the throttle body kit was like 250

[@alexvillalobos7137]

It’s like 320 not far of

[@r.cbikefloyd5390]

@@alexvillalobos7137 320 where must be for the DE

[@micromonsterfishingaquariu3420]

Will this fit a 2008 Nissan 350z?

[@ryanscanlan9875]

No. The 08 has the HR motor which has 2 x smaller TB's. You can upgrade them but different sizes.

[@mitsuoo1012]

Absolute NO REPLIES BACK TO ANY QUESTIONS. TELLS YOU THIS IS WASTE OF MONEY!!!! LOL

[@Reeds.outdoor.adventures]

What is the purpose of two adapters vs making the throttle body that fits directly?

[@TheRiceguy78]

alignment, some direct adapters are at an angle and tend to hit the hood when you close it

[@IanRobisonHighspeedAirsoft]

Does this work with the kintex intake manifold?

[@arturo9002]

It tells you in the video

[@iTerencexD]

Highspeed Airsoft it’s literally a kintex intake manifold as an example

[@joshjones3069]

Can I fit this on my 07 M? Same engine setup as g35/ 350z

[@joshjones3069]

But works with a de motor as well?

[@joshjones3069]

My M has the de engine.

[@turboxtcx]

@@joshjones3069 this kit in the video is made for the DE

[@joshjones3069]

chasingstatuszx10R ok thanks should fit mine

[@captainzzz2571]

Do these have a tapered bore like the NWP one does? Not sure if that will matter as much for N/A vs F/I? I am keen as this deal is cheaper then the NWP one. :-)

[@Conceptzperformanceczp]

it does, a very mild one

[@blitzcourt5021]

Wait...did you just...do the unforgivable...double click?

[@Rhino5.0]

Blitz Court what does that mean

[@Subninja2012]

Added to an Intake that makes no power. Show the dyno or it's just talk.

[@rickqueen65]

I want one now. But, for my 2JZ-VVTI swapped G35. Running the factory 2J manifold at moment. Can we make something happen?

[@Z33Garage]

This requires a tune correct?

[@Conceptzperformanceczp]

To get the most power you can, yes a tune should be done

[@Z33Garage]

@@Conceptzperformanceczp and installing this won't lean the car out like some of the big bore kits?

[@Conceptzperformanceczp]

@@Z33Garage no

[@Z33Garage]

@@Conceptzperformanceczp awesome thank you!

[@0_Salohcin_0]

I FUCKING LOVE JOJI.

[@absolutedynamite4979]

Is this setup possible on a 03 G35 with a Z tube running a stock air box?

[@fredjames8835]

Absolute Dynamite yea ofc it’s basically the same . I have a 07 G35 coupe 6MT and I took most my parts from my friends 05 350Z part out

[@AntiSocialBrian]

Any cyber Monday deals?

[@Conceptzperformanceczp]

starts next Wednesday the 21st and runs through cyber Monday! Some deals are going on NOW, such as air lift and Soul Function!

[@Chann0097]

What Throttle should I get when I get a Z in a few years?

[@Nocturniss]

Someone’s an 88rising fan

[@JordysF32]

Just ordered mine…

[@philipholman1713]

Ok you have a bigger hole now but the intake tube is still the smaller size. There is no more air getting to the bigger throttle body than the original one. To get more CFM you need 75mm tubing to feed the new throttle body.

[@devanstalnaker2573]

Thats the same thing I was thinking. This is like hooking up a cool air intake tube to a stock air box.

[@Academly_news]

Too bad your idle will be pegged above 1200 rpm even with a tune ... smh going back to stock

[@killerkingdon]

Take my money-🤣🤣🤣

[@fatjaysgarage]

There’s that plenum that you’re making me wait 2 months for 😒

[@mitsuoo1012]

My Datsun would Smoke this Infiniti and most all

[@italian.fascist]

No one cares

[@jhonsmith2150]

I wld buy, but not for $400 😳😬 lol 😌

[@dungdoan9830]

Cheap power with expensive parts 🤔

[@ketobeast8489]

I know right? If it was less expensive I’d own it, but 400 bux for 1-3hp pffft last mod I do.

[@J.Y_Z33]

@@ketobeast8489 got it for less than 300 🤷🏽‍♂️ just gotta find out when they run good ass deals and I was lucky to bump into it

[@mk5rob42]

Literally zero gains from a throttle body unless you have cams and a ported head....

[@Kanrinin01]

haaaaaaa

[@gilni9064]

Thats stupid. Why not just one thicker spacer instead of two. No dyno proof, im gonna pass this one.

[@FierceSkatin]

Pointless mod for these cars

[@lucaterohemi6743]

Can this be done with a 05 G35 sedan?

[@rubennava4397]

Is the nwp carb legal, It won’t affect smog correct?

[@sergionewsome6657]

mine just failed, they said that it was an unauthorized after market mod... such bullshit, another reason to leave California. I'll reinstall my OEM and get it smoged and than swap back. It just sucks having to go through that annoying bs... there is no reason, this comes in the 09 Nissan Maxima, not a high performance sedan...