3D Modeling with Drones using PIX4Dmatic

[@danielthomas9086]

Very nice video! Covered topic well. I like to use a cross hatch pattern and a 10 degree tilt on the camera when flying the mapping portion, I find it helps the processing algorithm.

[@elduderino5959]

Wow. Great job. Your video helped me so much. I really appreciate you making it.

[@guillermocarrasco5059]

Hi Rami. Very good presentation. Using a Lidar sensor would the result have been better? Thank yoy.

[@AsadUllah-h9e]

amazing video. thanks!

[@BigBoiBalu]

Thanks this info was gold. 🇨🇦

[@amrmaher3249]

بارك الله فيك 🇪🇬 🇵🇸

[@davidtensubam]

You inspired me a lot brother.

[@allguard001]

Thanks for sharing your results.

[@droneviewgis6699]

Great video. At the beginning you said 85 degrees, but I think you meant 85 percent overlap. To capture the facade on all sides of the house, I have seen a demo where the pilot walks the drone in hand and takes a pic every 5 to 10 feet. Can you upload to WebODM and compare to Pix4D?

[@Tony-bu3om]

Great video Rami. Simple and informative. I use a Mavic air 2s and Litchi for gathering my photogrammetry information. Thanks for sharing

[@RamiTamimi]

Thanks for watching!

[@franciscogallego3452]

Hi Rami. Thanks always for your time do this videos. can you let me know if there is an option to trim the out border of the 3d image?

[@joelfred1216]

Great video, would love to see a video on state plane vs. WGS 84

[@BradimusMaximus78]

Cool Tshirt!!

[@RamiTamimi]

Thanks!

[@MarcoAmaya]

Excelente Rami, buenos video , i am looking for a PPP with Emlid Studio process video i al ready watch the ppk emlid studio but maybe youo have a ppp one. thanks for yout videos

[@xdeepak12]

Hi man can you make a series explaining different steps involved in construction like from start to finish . would be cool to look what professionals do as im a undergraduate student so i ve no idea what actually happens. thank you

[@katdeskinner]

How much does your local FAA restrictions affect your work. Keeping in mind 400’ AGL, and 3 mile operation area from airports ?

[@satishborad]

hi, do we need to do any thing different while processing rtk/ppk data in pix4d matic?

[@ubong120]

can we use an iphone capture to fill in gaps not captured by the drone, and is there a workflow where both can be accurately stitched together

[@مشهورالنبهاني-ر4د]

السلام عليكم مهندس رامي...هل ممكن تدلني على درون رخيص ومتوفر ينفع لاعمال الرفع المساحي دقه +&- 10cm غير الDJI ... واكون شاكرلك

[@ezsurveyingco.ltdezsurveyi4951]

In Pix4Dmapper, we can specify if image geotagged are PPK/RTK by defining accuracy columns = 0.01 or 0.02. Can we do this in Pix4Dmatic?

[@luisenriquegarcia5111]

Can you publish the full specs of the laptop? Processor, amount of ram, hd and video, please.

[@impavidhd174]

Hey Rami, I’m a site engineer working in the UK, I love the videos and am currently looking at adding a drone to my current inventory to possibly phase out my current GPS Rover, plus replace my total station for certain tasks, however The only thing I am sceptical about is the software aspect of things. Can you possibly make a video comparing the different processing softwares, DJI terra, Pix4D etc… or if anyone has an advice/ preferences I would love to hear it.

[@impavidhd174]

Oh and do you have a video where you perform a survey like this and take linear measurements? then if possible compare to another form of survey? E.g: total station or even just tape? (For example just the dimensions of your house? Or fence line?) Just thinking in terms of performing a survey and then using it to build a CAD 2D drawing to present in design meetings etc… as this could be immensely beneficial…

[@beharsallahu6551]

HI, cant you help me how to do oblique plan, i cant find in plan fly

[@luistoledo1402]

COMO DESCARGO GEOIDE SOUTH TEXAS A COLECTOR DATA

[@6alisk]

What do you do with this model?

[@LukeShi-c5q]

Hi, how to set the circle fly route? thanks

[@liquidx1838]

it's the "Waypoint" - Function

[@redbat1010]

why didn't you use pix4dcatch for your high oblique pictures?

[@redbat1010]

hahah you answered my question at the end. lol

[@RamiTamimi]

Stay tuned!

[@bogalindah]

tutorial on verticality survey using total station...pls?🙏

[@RamiTamimi]

Here you go - kzbin.info/www/bejne/hpq8k4hobbalotk

[@bogalindah]

@@RamiTamimi great! Thank you

[@surveyors]

Good

[@molakisivale1693]

can you send the dataset

[@otamurodtulaganov3451]

Where good😎😎👍👍👍

[@RamiTamimi]

Glad to hear that!

[@ctgaia]

Why didn't you just plan a 3d mission? I think you can get better results...

[@RamiTamimi]

I usually do, this is a basic workflow. I'll get into more advance methods in the future.

[@ramizdababneh932]

Great video, anyway you can check instagram messages. Thanks!