I decided to print my first dummy 13 ( it’s currently going) and I looked for videos on them and this one blew my mind because the most I have ever scaled up a print is 150% ( I’m subing )
@MrCampbellPrints2 ай бұрын
Thank you I appreciate the support and thanks for watching
@Dono71112Ай бұрын
Now that’s a TITAN 13
@MrCampbellPrintsАй бұрын
Thanks
@rigggaming3908Ай бұрын
Wow! Love this. I just printed one scaled to 225% after seeing this Im going to upscale even more. Was worried about puting it together but seeing how you did it and put my mind at rest. Great work.
@MrCampbellPrintsАй бұрын
Thanks for the support. Just remember not to overheat, or it will be too loose. If that happens, apply layers of super glue slowly layer by layer on the affected area
@sopheakheng620623 күн бұрын
It's look so good in the morning 😊
@MrCampbellPrints23 күн бұрын
It really is!
@dragonlord843422 күн бұрын
The mini dummy 13’s on the big human sized dummy looks absolutely amazing
@MrCampbellPrints22 күн бұрын
Thank you for the support, and the mini version looks small, but it's printed at %150 scale. It proves how big the large one is
@Vondora5 ай бұрын
4:25 At this point I think you could just give him a normal sized knife xD Great Work!
@MrCampbellPrints5 ай бұрын
Lol, I was thinking the same, I did try, but handles on the ones I had were either too small or too large
@calebjohnson5058Ай бұрын
You made a life size Lego bionicle!😂❤
@MrCampbellPrintsАй бұрын
I might go bigger
@rellsmooth12433 ай бұрын
Now you gotta give him a face
@MrCampbellPrints3 ай бұрын
If you watch the short movie, It looks like he might take mine lol
@Crazed_corbin3 ай бұрын
Where did you find the print model at
@MrCampbellPrints3 ай бұрын
Printables.com
@LaenFromDoomed2 ай бұрын
he got the corpse of king minos as a T13 in his room
@MrCampbellPrints2 ай бұрын
It's too much to have it staring at me. I gave it to my youngest, who now uses it as a guard of their bedroom lol
@SMJ5S3 ай бұрын
What 3d printer did you use? Please I need it my 3d printer is broken so I’m trying to replace it.
@MrCampbellPrints3 ай бұрын
Bambulab p1s
@laschamp56512 ай бұрын
best investment
@MrCampbellPrints2 ай бұрын
Thanks
@laschamp56512 ай бұрын
@@MrCampbellPrints yw
@Reel_randomtvman5 ай бұрын
I was gonna make a big t13, BUT NOT THAT BIG
@MrCampbellPrints5 ай бұрын
Like they say go big or go 750% lol
@Reel_randomtvman5 ай бұрын
@@MrCampbellPrints lol
@sebastianclaes-sw6edАй бұрын
Am I crazy trying to print this in 1250% scale. I want it to be my size ^^
@MrCampbellPrintsАй бұрын
Not crazy , you will be a pioneer lol. The reason i didn't go past 750 as my p1s couldn't hold anything bigger in one piece if i had a printer with a larger build volume I definitely would go bigger, but if yiu want to maintain strength I would suggest trying not to slice parts and having to rejoin them with glue etc later, if that dose t bother you and it purely a size thing than even on a average build volume print you could go to probably 1600 - 1800 hundred comfortably before part placement becomes an issue
@sebastianclaes-sw6edАй бұрын
@MrCampbellPrints I will keep you updated. I have some really big printers like the Elegoo Neptune 4 Max. Therefore I will be able to print it that big. I even found a modified chest frame piece, that was especially designed for large scale. (I posted the link in this comment but it seems like the comment was deleted automatically becuase of the external link) This project will take some time but eventually I will upload a video of it and come here again to notify you all :) I have a cooperation with a local business and my plan is to put this in his store. This will definitely attract lots of new customers.
@melissamurphy6725 ай бұрын
Amazing video
@MrCampbellPrints5 ай бұрын
Glad you think so!
@BettyGallagher-qf7usАй бұрын
Love your content.
@MrCampbellPrintsАй бұрын
Thank you so much it truly means a lot to read this
@wickedPrints32563 ай бұрын
I just did one at 200% and had 4 pieces to break. The Frame chest female connector broke while trying to add the head, and 3 of the knee elbow connectors broke while trying to connect one of the knees. The parts that broke were all printed using PETG. I used Glow in the dark PLA for the armor bits. I will use my heat gun on the replacement parts. Thanks for the advice. Cheers!
@MrCampbellPrints3 ай бұрын
No worries let me know how it goes
@wickedPrints32563 ай бұрын
@@MrCampbellPrints Went great! I overheated one of the leg connections and it was a bit too loose. I just popped it off and reheated it. Closed it up a bit and it stiffened right up. Thanks again!
@3D-PrintTherapy5 ай бұрын
Cool, made one in 600%, largest ive seen online was 1337%
@MrCampbellPrints5 ай бұрын
Looks like I have to beat 1337%
@wcbyrdiv4 ай бұрын
Would love to see one life size, whatever scale to make it about 6 feet tall.... probably about 1200% since its normally about 6 inches.
@MrCampbellPrints4 ай бұрын
🫡
@kumikokuma15465 ай бұрын
Now thats the real t23
@MrCampbellPrints5 ай бұрын
Thanks
@321_let_rip2 ай бұрын
Nah that’s the dummy 1313
@MrCampbellPrints2 ай бұрын
Lol
@Koenigsegg-jesko5 ай бұрын
Good vid man you have a new subscriber!
@MrCampbellPrints5 ай бұрын
Thank you so much
@ZachoroАй бұрын
Yo please can you do a 20 cm t 13 it’s bigger please
@MrCampbellPrintsАй бұрын
You mean just at 20cm height
@ZachoroАй бұрын
@@MrCampbellPrints yes please
@Pugwash.4 ай бұрын
Wow. If you go any bigger, it's probably worth printing the top of a ball as a seperate part to screw into the bottom?
@MrCampbellPrints4 ай бұрын
Good idea
@AbbyVSminecraftАй бұрын
I 3d printed a dummy 13 at 200% scale with these settings
@MrCampbellPrintsАй бұрын
How did it turn out, thanks for the support
@MichelleWilliams-p8wАй бұрын
Nice job 👍🏻
@MrCampbellPrintsАй бұрын
Thank you
@OBalien4 ай бұрын
Man i gotta print this !!! How many rolls of filament did it take ??
@MrCampbellPrints4 ай бұрын
Only 3.5 rolls
@SAG-studio4 ай бұрын
You should have yoused tree supports would have saved some time money and work . (Unless you’re already using tree supports) and what infill% did you use
@MrCampbellPrints4 ай бұрын
I used 10% infill, I tried tree supports, but I found the quality of the print was better with just standard support
@ThatGuy-mp9og2 күн бұрын
Are you saying it took less then 4 1kg rolls of filament?
@MrCampbellPrints2 күн бұрын
It took just under 2kg of pla and 1.5kg of petg but it will depend on the infill and how solid you want it I have also built this with 50% infill and to be honest it's over kill it didn't add anything, if anything it made the model to heavy to stand up on its own
@SpectreIX3 ай бұрын
There’s an evangelion remix of dummy 13, I wonder how that would look at 750%🤔
@MrCampbellPrints3 ай бұрын
I think it would look great
@cheikh13155 ай бұрын
Nice.
@MrCampbellPrints5 ай бұрын
Thank you! Cheers!
@murderdronesnplayz8423 ай бұрын
Now that is a n13 titan if I say to my self and I like how it's big I never saw one maybe you can make a another one and have a stop motion fight just saying for idea
@MrCampbellPrints3 ай бұрын
It's not a bad idea, but it's so big and heavy that the limbs don't stay in place, but it is probably down to me just down to me sanding down parts to fit. Thank you for the support
@murderdronesnplayz8422 ай бұрын
@@MrCampbellPrints okay and no problem :)
@LEOD_it5 ай бұрын
you need to rotate it 180 angle
@MrCampbellPrints5 ай бұрын
Are you referring to the armor
@Mrcookie36692 ай бұрын
do yo have settings for a 250 times scale one
@MrCampbellPrints2 ай бұрын
I haven't printed in 250 but I would use the same settings as when printing 100% just adjust layer height to mabey .16 or .2
@garylynch899012 күн бұрын
Can i have one of your dummy 13 please i can't make my own because I don't have a 3d printer yet
@MrCampbellPrints11 күн бұрын
Here is the store link. Hope it helps mrcampbellprints.etsy.com/listing/1692155915 mrcampbellprints.etsy.com/listing/1752056371
@k4rz3n4 ай бұрын
How do you deal with the loose joints after a while
@MrCampbellPrints4 ай бұрын
You can add a thin lay of Super glue or equivalent and let it dry and keep adding layers
@k4rz3n4 ай бұрын
@@MrCampbellPrints thanks for the tip🔥
@wcbyrdiv4 ай бұрын
If you use super glue, you have to either disassemble it before applying the glue, or apply it to the joint and keep wiggling the joint until it is completely dry, which takes longer than you think. The better solution is pledge floor wax. You just drop a few drops into the joint while it is still assembled. wiggle the joint to spread it and then let it sit for about 2-3 hours to dry. If its still loose, apply again. Because its not adhesive, you never have to worry about the joint seizing up.... Old trick learned from the Star Wars figures back in the 70's.....
@k4rz3n4 ай бұрын
@@wcbyrdiv Very helpful 🤝🔥
@brandimcelyea810516 күн бұрын
Give me the 3-D print
@AbbyVSminecraft5 күн бұрын
no
@diegohernandez66444 ай бұрын
Do a video of all little dummy vs the 750%
@MrCampbellPrints4 ай бұрын
I see you're a fan of the underdog, lol
@Gygantis3DRullz4 ай бұрын
Im trying to print The Dummy 13 action figure using the Cura software with my Ender 3 v3 se, But the parts especially the crotch doesn't seem to fit. If anyone knows the Ultimaker Cura Settings for the print in specific detail, please give me an answer. I Don't wanna waste anymore filament. i wanna scale it to 300% IDK what im doing wrong! why isn't this working for me?
@MrCampbellPrints4 ай бұрын
I use the same settings that I printed this size dummy 13 on the 150% and 400% scale that I have printed mabey them
@Pugwash.4 ай бұрын
Have a play with the Horizontal Expansion. I used -0.1mm when I printed at 173%
@jadehouser687213 күн бұрын
Poor figure of mines can meet his father😢
@MrCampbellPrints11 күн бұрын
Luke, I am your father
@FilimonFed3 ай бұрын
I want that it's so cool
@MrCampbellPrints3 ай бұрын
Thanks
@FilimonFed3 ай бұрын
@@MrCampbellPrints What type of printer do you have I might buy that one Or not if it's too expensive