3D Printed HO/OO Model Train Engine Power Bogie Assembly Video

Рет қаралды 56,327

Күн бұрын

Пікірлер: 55

@pietcement9603 4 жыл бұрын

wow... ive spend hours designing my own... and then you come up with this! great job! i feel like i've designed a special ballpointpen and you've shown me a pencil :) oh, and thanx for sharing it as well!

@warebuilt8007 4 жыл бұрын

That's awesome! I'm glad you like it!

@trraghavendra8748 7 ай бұрын

Hai your video on the subject is very wonderfull. It is very thought full and educative for us who are bigginer. Look forward such videos.

@charlesmalinowski8696 Жыл бұрын

Super cool! I’m excited to adapt to 1:64 S Scale Locomotives. Thank you for sharing.

@warebuilt8007 Жыл бұрын

Thanks, I'm glad you liked it!

@jannielsen6784 3 ай бұрын

They were made 30 yrs ago by Tenshodo as SPUD Self-Propelled Underbody Drive.....amongst others they dissapeared fast as they had no pulling power. And when weighted, they had no chance pulling themselves plus a carload . I had 4 built into a scratchbuilt UP veranda turbine but no luck. Bought a brass instead.

@Trainingtofailure 10 ай бұрын

What happens if i make one with 775 dc motor and attach it to cardoboard train how fast it go

@amanfreefirezen186 4 жыл бұрын

Congratulations for new channel best wishes for you

@warebuilt8007 4 жыл бұрын

Thanks!

@RailRide 3 жыл бұрын

The real challenge is to do this for 3-rail O-Gauge. I'm already capable of scratchbuilding carbodies, and I'd like to try my hand at powered units (such as electric MU trains) but finding a means to power them has been a show-stopper--the only ones out there in 'O' are 2-rail, and even those are hard to come by. I've seen photos of one hobbyist's project that mounted can motors axle-hung style (like the prototype) on G gauge wheelsets using strips of brass, but nobody's been able to do it in 'O' since some outfit called 'Methodology' marketed a line of slot-car motors geared to O-gauge wheelsets back in the 1990's.

@warebuilt8007 3 жыл бұрын

Interesting concept, I have a few ideas, but lacking access to 3 rail track means I have no way of testing. From memory, I went through 9 revisions of the original design to gain a workable prototype. I would imagine a brushed slot-car style pickup or two could be used for the centre rail, larger dual shaft can motor, bronze bearings & gear to match the axles would be a good starting point. With the larger size, further development to incorporate secondary gears/shafts would give better performance.

@WWIIREBEL Жыл бұрын

Just curious, but what is/was the wheelbase for this powered truck frame in the video?. I ask, because I'm looking to power up some HO scale MU coaches and maybe a couple of Box cab electrics.

@warebuilt8007 Жыл бұрын

Hi, the wheelbase is 32mm (centre to centre on the axles). It can be expanded to approx. 40mm if required.

@trainworms 9 ай бұрын

I've spent hours trying to find a way of getting cheap BO motor bogies, I feel that salvation is at hand

@nordictram 3 жыл бұрын

Nice video! - Greetings Nordic Tram

@LifeOfRiley2166 2 жыл бұрын

What tools are you using to remove wheels and adjust gears et cetera.

@warebuilt8007 2 жыл бұрын

It is a RC Pinion Puller kit. There is a link to the one I purchased on the Thingiverse page.

@parthbobde7365 4 жыл бұрын

Awesome work!!!!

@warebuilt8007 4 жыл бұрын

Thanks!

@shuttyskenzin9237 Жыл бұрын

Maybe you can use gear motor instead of normal motor for a more sweet, gradually decreasing speed stop like the real locomotives. it would look super realistic. Hope you try that out! gday

@warebuilt8007 Жыл бұрын

That's an interesting idea!

@robertocordon Жыл бұрын

Do you have a link or name/model for the motor you used?

@warebuilt8007 Жыл бұрын

Hi there, the motor is a '12V 030 Micro Motor DC, 1.5mm shaft'. There is a complete list of parts required on the Thingiverse link in the video description.

@eliasalvarez295 4 жыл бұрын

Can i put a brushless ac motor to this?

@warebuilt8007 4 жыл бұрын

Good question! The chassis could potentially be modified to fit a brushless motor if a suitably small/micro brushless in-runner motor could be sourced.

@TomCro2022 2 жыл бұрын

Nice video👋👋👋👋👋👌👌👌👌👌

@nathandelay 4 жыл бұрын

You did an awesome job on the locomotive and even more awesome that it runs I scratch build trains out of soda cans and I just subscribe to you and have an awesome day my name is Nathan

@warebuilt8007 4 жыл бұрын

Thanks! Your soda can trains look interesting!

@busygirl512 3 жыл бұрын

Evvc b

@vijaysuryawanshi81 4 жыл бұрын

sir wheel kaise banaya batao na plz

@rickygates1476 4 жыл бұрын

Can you supply the plastic chassis?

@warebuilt8007 4 жыл бұрын

I could, but a company like shapeways.com would be able to produce a better quality print than I can.

@thiruraj3866 4 жыл бұрын

Well now I know how to scratch build a model locomotive

@joelminiaturasferroviarias1595 4 жыл бұрын

Thanks for sharing. ☺👍

@warebuilt8007 4 жыл бұрын

You're welcome!

@joelminiaturasferroviarias1595 4 жыл бұрын

@@warebuilt8007 Thanks friend.

@osmanpasha_diy 2 жыл бұрын

Awesome! Where did you get wormgears (and matching axis gear)? Are they 3D-printed?

@warebuilt8007 2 жыл бұрын

All the parts used can be sourced from Aliexpress. There is a complete listing of parts on the Thingiverse link in the description.

@osmanpasha_diy 2 жыл бұрын

@@warebuilt8007 ah, thanks. So, are you using a worm and straight spur gear? Shouldn't it be a specific worm gear instead of a spur gear so that it mates with the worm correctly?

@warebuilt8007 2 жыл бұрын

@@osmanpasha_diy Both the worm gear and the spur gears selected have the same gear pitch, so they mesh correctly, the only major difference is the shaft diameter, the motor is 1.5mm and the wheel axle is 2mm.

@osmanpasha_diy 2 жыл бұрын

@@warebuilt8007 what I mean is that teeth of the worm are skewed, and so teeth of the gear must be angled as well. Them being straight might account for the noise