3D Printed RC Boat M-jet Sprint Jet Drive - Assembly 4K

[@reganhart4358]

Great boat.. a friend has just printed out this for me and can't wait for the parts to arrive so I can start assembling it.. and then get it in the water..

[@Mr.RC-Creator]

Hi Regan Hart Thank you so much! ^^

[@ChampTruex]

Love the 3D printed boat vids, i cant stop making boats, now bigger boats thanks to the anycubic kobra max printer lol hope to see more videos on this boat im printing it now,

[@Mr.RC-Creator]

Hi.Champ Great!

[@pavelack]

If only i had a printer, im using currently a proboat jet jam modded to fit a watercooled brushlesss on 3s like your setup but the boatitself is more a pool racer than an actual jetboat hull so it drives kind of funky at high speeds. Where can i find this print file to maybe have it done locally

[@Mr.RC-Creator]

www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@sylvainswift3234]

Very nice job. But please, this music all along...

[@Mr.RC-Creator]

Thank you very much! 😁

[@eric1052]

This boats design is amazing

[@Mr.RC-Creator]

Thanks. ^_^

[@carloshnunez]

Nice boat 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

[@Mr.RC-Creator]

Thank you!

[@siebels76]

Sehr cool umgesetzt. Die lenkung ist genial konstruiert.

[@Mr.RC-Creator]

@siebels76 Danke🙂

[@genz75]

Wow really great work

[@Mr.RC-Creator]

Hi.Genz Thank you!

[@jeffwhite9001]

2:18 you forgot the o-ring that goes on the end of the shaft. 3:05 and the o-ring that goes on the steering shaft.

[@Mr.RC-Creator]

Thank you very much! for your advice. Don't worry, it can be fixed.😁

[@Lummep]

hi um do you thing you can give me the files to print this because i love it

[@Mr.RC-Creator]

Thank you so much! www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@АнтонПетров-к2ъ]

what kind of battery is on the boat and how long does it work? at maximum power, will it be able to work for 5 minutes? if you use a 2s battery, do you need to increase kv for the same speed?

[@Mr.RC-Creator]

What kind of batteries are there on board? / lithium polymer and how long can it be used?/ 2-4 minutes At maximum power will it work up to 5 minutes? cannot if using 2s battery need to add kv?/ kv must be added Is it the same speed as before?/Mainly around the motor

[@phaley51]

What setting did you use on the impellers? struggling to get mine to come out good. Any temp/speed/cooling/min layer time recommendations?

[@Mr.RC-Creator]

Hi.Phaley51 I set print, nozzle 0.2, temp190, speed 60, auto cooling.

[@owntor1]

It's a motorized 'Footie'. :)

[@Mr.RC-Creator]

Hi. Jim A Thank you!

[@AlejandroAlcantara]

Very nice! And great details it has.

[@Mr.RC-Creator]

Hi.Alejandro Alcantara Thank you so much!

[@sharaddas7534]

Boat looks amazing... Can you share the file

[@Mr.RC-Creator]

Thank you!

[@rcreactioner]

nice !! how can i get the file Dear?

[@Mr.RC-Creator]

Link www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@tbunited5486]

Hallo, wo gibt es dieses boot, wo finde ich die Anleitung und STL zum drucken lg

[@Mr.RC-Creator]

Thanks!!! www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model 😊

[@tbunited5486]

zu teuer

[@Bam13boy]

friend, where can I download your model? She's very cool

[@Mr.RC-Creator]

@mi drone Thank you so much! www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@piseth_rc]

you can share STL file?

[@Mr.RC-Creator]

www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model 😊

[@laurentoutan9922]

A quoi sert une double hélice ? Comme dans les turbo réacteur d avion ?

[@Mr.RC-Creator]

Yes, it sucks and pushes the water better and faster.🙂

[@rcplaytime]

got my very first boat today,i love it ,found your channel looking for other rc boats😀 subscribed 👍 👍

[@Mr.RC-Creator]

Hi.rc play time Thank you for subscribed I feel good that you like it.

[@easternrc1924]

Lol at speeding up the running footage

[@solidusseal]

Can you provide exact links to the elektronics?

[@Mr.RC-Creator]

Hi.Michale www.aliexpress.com/item/1005001560913211.html?spm=a2g0o.productlist.0.0.4f3718e72MquHM&algo_pvid=6a2d248f-1ee8-4e71-963c-fe4e712addd2&algo_exp_id=6a2d248f-1ee8-4e71-963c-fe4e712addd2-10&pdp_ext_f=%7B%22sku_id%22%3A%2212000016595477535%22%7D&pdp_npi=2%40dis%21USD%21%2138.48%2138.48%21%21%21%21%402101e9ce16544074344385776e2e7d%2112000016595477535%21sea www.aliexpress.com/item/1005001587926478.html?spm=a2g0o.store_pc_groupList.8148356.53.266360c5AkcgtU&pdp_npi=2%40dis%21USD%21US%20%2458.00%21US%20%2430.16%21US%20%2430.16%21%21%21%21%400b0a555a16544075531438481e8fd5%2112000016699195446%21sh

[@karstenspringmann644]

Hey, can you send the data file ( for pay ) ? Best wishes from berlin, karsten

[@Mr.RC-Creator]

www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@AeromodellingTanjungbalai]

👍👍👍👍

[@Mr.RC-Creator]

Thank you so much

[@bomangoz]

What's the largest hull piece? Will it print on and Ender 3 v2?

[@Mr.RC-Creator]

Hi.Low range The largest being the head and stern of the hull is the largest. Printed on BIQU B1!😁

[@bomangoz]

@@Mr.RC-Creator do you have the measurements?

[@bomangoz]

Would it print well with petg?

[@Mr.RC-Creator]

@@bomangoz Yes, it can print well with petg!

[@Mr.RC-Creator]

@@bomangoz Print at original file size.

[@behind8498]

ใช้กาวอะไรต่อครับ

[@Mr.RC-Creator]

3M CA40

[@Raycefan]

Because I absolutely want this

[@Mr.RC-Creator]

🙂

[@ChampTruex]

what print settings did you use, if you dont mind my asking ?

[@Mr.RC-Creator]

Hi.Champ BIQU ฺB1 print settings Material PLA+ Layer height 0.2 Walls 2 Infill 5-10% speed 60 Nozzel 190 Bulid plate 60

[@scubabonks]

What's the size of the ball bearing bud?

[@Mr.RC-Creator]

Hi.Scubu Bonks.. Ball bearing size 4x10x4

[@scubabonks]

@@Mr.RC-Creator thanks for the info mate

[@perezperformance8022]

hey bro! please i need stl archives! i like print!!!!

[@Mr.RC-Creator]

www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@perezperformance8022]

Thanks a lots from Spain!!! Reguards!!

[@IllertalRC]

Hey Friend. Your Jetboat is running very nice. Im struggling to find the perfect center of gravity. Could you help me? My M-Jet Boat is jumping at full speed. Greetings from Germany 💪💪

[@Mr.RC-Creator]

Find the center of gravity of the battery.

[@katrinakemble8911]

how do i and where can i find the link to it?

[@Mr.RC-Creator]

www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@flrojaschannel]

Great job! I really enjoy this project. How can I contact you? (Would like to get more guidance about this project) Best regards from Argentina!

[@Mr.RC-Creator]

Hi.Franco Thanks, I'm sure you can do it and I'm always happy to give advice on the project if you have any questions.🙂

[@flrojaschannel]

Is possible to use other motor with less speed? I’m looking for an alternative where I can maximize the use/play time to 1 hour, is that possible? How to get the files for 3d print? Thanks a lot!

[@Mr.RC-Creator]

@@flrojaschannel It is possible to use a low speed motor which reduces power so you can play longer. and can increase the size of the battery to have more capacity as well But it may not play for less than 1 hour as this will cause the speed controller to overheat and possibly damage it.🙂 www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@sirikoomsuppakasam1355]

What size moter? ESC.

[@Mr.RC-Creator]

Hi.Sirikoom Motor 2968 3400KV ESC Flycolor 90A!

[@sirikoomsuppakasam1355]

@@Mr.RC-Creator ❤️ Thank you verry much.❤️

[@blakesonmor5771]

What 3d printer do you have?

[@Mr.RC-Creator]

HI.Blake sonmor I have BIQU B1🙂

[@christians.2254]

Really nice work !! Love the integrated flood channel 👍and the motor mount! Can i buy the files somewhere???

[@Mr.RC-Creator]

Hi.Cristian S. Thank you so much! www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@favian3380]

Run time on 3s ?

[@Mr.RC-Creator]

Yes. 1300mah 3S

[@goodwater2020]

Can you link hull print file?

[@Mr.RC-Creator]

www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model 😊

[@ชาวนาตาดํา-ต6ด]

คุณได้ทำขายมั้ยฉันติดตามคุณ

[@Mr.RC-Creator]

สวัสดีชาวนา ตาดำ ฉันไม่ได้ทำขาย ถ้าคุณสนใจฉันแนะนำให้คุณได้

[@ชาวนาตาดํา-ต6ด]

@@Mr.RC-Creator ช่วยแนะนำฉันหน่อยยังไงบ้างฉันเป็นมือใหม่แต่ฉันติดตามคุณมานานแล้ว

[@Mr.RC-Creator]

@@ชาวนาตาดํา-ต6ด ลองดูลิงค์ที่นี่ facebook.com/Surat-RC-102542685371938

[@laurentoutan9922]

Génial ce modèle quelle imprimente avez vous ?

[@Mr.RC-Creator]

😁 😁😁😁😁 i like it

[@Raycefan]

Link to the .stl files?

[@Mr.RC-Creator]

Hi.Raycefan link www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@봉다리-b8y]

Hi Can you send me the 3D printer file by e-mail?

[@Mr.RC-Creator]

www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model

[@PERSO46]

enlace de descarga?

[@Mr.RC-Creator]

@perso4629 Thank you so much! www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-sprint-3d-printable-rc-jetsprint-boat-model