3D Printed Rotating Table - Arduino Nano and 28BYJ-48 Stepper Motor

[@maker101io]

Source code, Circuit diagram, PCB Gerber file, 3D STL file: www.pcbway.com/project/shareproject/3D_Printed_Rotating_Table_Board_with_Arduino_Nano_and_28BYJ_48_Stepper_Motor_ca5b53c9.html

[@yertelt5570]

Cool turntable. All the electronics were included in an Arduino starter kit I got a few months ago, and I also ordered a three pack of nanos at the same time, so all set for hardware. I'm either going to use a small breadboard or maybe a small piece of prototype board. The PCB you designed is very cool, thank you for providing the design, and $5 US each is a great price, but the $20 shipping from PCBway is tough to swallow, especially for DSL The few times I've ever had something lost while being shipped is when the vendor shipped with DSL They actually lost an entire bench top metal lathe once, smh. Great project, thank you for your time and effort.

[@BasementCreationsChannel]

Hi Mert! I love your channel and your videos helped me in many projects so now I am very glad that you made one of my own creations!

[@maker101io]

Your designs are really good! Also thanks for sharing open source ❤️ By the way, I subscribed to your channel 🤖 Finally, thanks for the comment 🥂 Rotating Table 3D Parts - www.thingiverse.com/thing:4817279

[@mujganklc6929]

Çok güzel eline sağlık 👍♥️♥️♥️♥️annecim👏

[@SeferDöngel]

Project is nice... Musics are wonderful :)

[@maker101io]

Thank you 🥂 😇

[@thisoldjeepcj5]

Thanks. I can see other applications for this.

[@canselklc8442]

Again 💯💯

[@maker101io]

Thanks ❤️

[@inomaker]

Good project :))

[@maker101io]

Thanks 😇

[@OutTheGaWoods]

When you say 5v power supply, what do you use ? I want to run my stepper as well as an led light strip

[@mujganklc6929]

Çok güzel bı proje olmuş harikasın ♥️♥️♥️♥️👏

[@ajipratomo5083]

what is the maximum load weight?

[@noahjaffari]

I would love to know what sized bearings you used? Thanks in advance for your reply :)

[@parthlekhadiya7231]

Bro pcb way ka 10pc pcb kitne me para ??

[@lucabergamaschi151]

Can I have a link for correct on off switch type? Thanks

[@Halloween_Central]

Ay quick question for you, is it possible to control servo speed in the adafruit pwmservo library? I am using the board the you showed in your 16 servo tutorial.

[@maker101io]

Please have a look here - learn.adafruit.com/16-channel-pwm-servo-driver/using-the-adafruit-library

[@Halloween_Central]

@@maker101io Hey! First off, big fan of the channel! Second off, unfortunately this didn't give me any info on controlling the speed, unless there is a part of it that i missed. Is there any way to make the servo slower? Thanks!

[@thedragonbliz]

Hey, nice Tutorial, could you do another one? I need to dim a LED with the help of a LDR the more Light there is. It needs to be activated with a Button. I don't know how to do it, so I would really appreciate your help.

[@LordDeShadow]

How many Amps are needed for the 5V power supply? I want to do this projet but modify it a bit so I can lay a lithophane cylinder on this base. Im trying to figure out the demand of these electronic components. (I'll add some LEDs and will modify the top plate stl a bit). Its for a Christmas gift. Any help will be appreciated. Thanks guys!

[@fifipapa]

Can someone explain to me , why i have to use L7805ACV?

[@LordDeShadow]

How many amp for the power supply? And for the transistor in your circuit. Is it an AVB or ACV? If you check on pcbway the name change between the 2 lists. Hope to have a quick answer, its for a gift. Thanks!

[@FilmFactry]

I'd use an ESP 32 and control speed and direction via wifi web interface.

[@maker101io]

Good idea 👍🏻

[@FilmFactry]

@@maker101io I'm not a programmer, I'd almost use the ESP32 firmware version of Marlin which works with a 1604 Oled out of the box, or the ESP 32 GRBL. They have a nice web interface.

[@canselklc8442]

First 😊

[@maker101io]

😇

[@esinti8735]

@@maker101io hocam nema17 ve arduino nano kullanarak dönen stand yapmak istiyorum, bir videoda motor sürücü kartını koruması için 100mikrofaradlık kondansatör kullanmış.. ben de şu an sadece bu parça yok, olmasa da olur mu? ve bir de arduino kodları için yardımcı olur musunuz, henüz başlangıç seviyesindeyim kodlarla alakalı pek yeteneğim yok.

[@nalbur_]

Merhabalar size sponsorluk ile ilgili mail atmıştım spam klasörünüze düşmüş olabilir kontrol edip geri dönüş yaparsanız sevinirim. İyi günler dilerim.

[@barskuyas7881]

teklifiniz nedir acaba aynı ürünü sizin için üretebilirim

[@sluggy6074]

So sad... 😢

[@trafoman2004]

{mute:on}