Blender 3D - Create a 3D Isometric Living Room | Beginner Tutorial | Part 2/3

Don't forget to save the project (ctrl+shift+S). I forgot to add the part where I saved in the video.
#blackfriday sale on the full course: Blender 3D Stylized Rooms
Gumroad link: 3dgreenhorn.gu...
Blender Market: Coming soon...
This is Part 2 of the Blender 3D Stylized Living Room
Watch Part 1 here: • Blender 3D Beginner Tu...
Part 3: • Blender 3D - Create a ...
If you have any problem following this video you can also check out my previous 20 minute Blender beginners guide: • Learn Blender 3D in 20...
Software used:
Blender: www.blender.or...
#blender3d #blendercourse
Chapters:
00:06 Curtain rod and holder
04:47 Curtains
08:26 Wall lamp
11:06 Wall clock
14:07 Coffee table
15:43 Coffee cup and plate
18:24 Donut part 1
Check out more interesting courses on these schools (beginner and intermediate levels):
CG Boost: academy.cgboos...
Polygon Runway: polygonrunway....
Join me on Patreon: / 3dgreenhorn
Instagram: / 3dgreenhorn
Twitter: / 3dgreenhorn

[@3dgreenhorn]

Enroll in full course: 3dgreenhorn.gumroad.com/l/stylizedrooms

[@Javier99999]

can't beleive I spent a week making a donut, when 3dgreenhorn made me make a donut in 5 minutes.

[@themalcontent100]

The donut one does teach a few tricks and the basic tools. i did solidfy modify. Every tutorial is meant to teach you something, even if it is reinforcing what you have learned.

[@Watashinomori]

It took me about 3 hours to complete this tutorial. It was about 40 min to follow it (with pause and replay etc) and 2h20 of me screaming about how cute the cup was. I'm afraid of going part 3... it will take forever then...

[@3dgreenhorn]

Don't be. It'll all be worth it to see your scene in full glory 👍 keep going

[@ambassadorseaweed5818]

This comment is so cute🥰

[@resared8538]

You are really good at teaching, you teach people how to do an action and then make them repeat it multiple times so it sticks, respect man, you got potential.

[@duartefurtado6103]

This tutorials are really making getting into Blender very enjoyable, thank you!

[@WorldGamerNerd]

I'm excited for the final part. I am learning SO MUCH with this tutorial. Shortcuts, tips, etc. That is the perfect way to learn: in the practice.

[@johnb8940]

One of the things I enjoy about blender is how you can do the same thing in about a dozen different ways, and you're using different tricks for essentially the same things. There were a couple times where my mesh wasn't quite doing what I wanted it to, so I used a different tactic to get a similar effect. Oddly enough the curtain tripped me up the most.

[@gleb3841]

For those of you who at 15:50 don't see a circle, add the mesh circle, hit tab to go into edit mode and hit "F" to fill it in.

[@neio589]

bro your my hero

[@gleb3841]

@@neio589 💋

[@caneaandrei4617]

You saved my life bro

[@Vm-ej1qc]

Thanks bro I was wondering why mine is different even though i repeat it lot of times Cuz in the vedio he doesn't tell us to fill. U r hero my bro

[@izaias_g]

Thanks

[@andrewp4455]

For anyone having troubles with the rotation from the origin. On the menu bar next to Global, you'll see a box in which you can select '3D Cursor' which will help you align with the center point.

[@Mystic_Raine]

I am still having trouble even with this solution. Once I duplicate with alt+d, I am able to move my mesh freely. But once I press R, it snaps back in place, and no matter how I move my mouse, the object stays in place. Do you know what I might be doing wrong?

[@Mystic_Raine]

It's okay. I found the solution. Apparently I had "only locations" checked in a pie menu brought up by "." I was able to do it after I unchecked it.

[@user-zn1cm3nt8q]

@@Mystic_Raineme too😢

[@juliam9191]

You have no idea how much you've helped me :D Thanks@@Mystic_Raine

[@igormilesi]

For the people who have problem with minute 12:36, just set the origin to the 3D Cursor, duplicate with ALT + D and click R to rotate

[@izaias_g]

Very Thanks

[@engelshass]

omg you saved my life. i was about to go crazy, because mine doesnt do what the thing in the video did

[@izaias_g]

yeesss @@engelshass

[@teabagNBG]

part one took me 3 hours lol but still better than alot of other tutorials

[@aznood3004]

i watched part 1 : 10 time, repeat 10 time, to learn by repetition, oh man it feel good ! it good to bealive ! thanks sir !

[@3dgreenhorn]

Wow ❤

[@supersus5229]

15:51 I spent AGES to make a cup and you made it in few minutes!!! THANK YOU for the tutorial!!!!

[@sunnatullohmuhammad9715]

Yes, now this time wait to part 3 ❤️

[@elle450]

You are the only one that can me make me do things on blender! You make tutorial in a easy way and I'm happy to be able to keep up with the tutorial! While I finish this beatiful room I hope to see new tutorial videos like this on your channel! Thank you so much xoxo ps: At the moment how many room of the room are available in the course? I'm considering buyin it :)

[@3dgreenhorn]

Thanks for the kind words, only living room is inside, bedroom will be uploaded this week and full course will be finished by 1st week of June 👍

[@anwen741]

thank you, great tutorial 🙂 took me a few days but i did it...now going to dive into the 3rd part

[@themockingjay94]

the amount of times i accidentally refreshed this video while trying to add loop cuts was... way too many... Thanks for the great tutorial!

[@user-zn1cm3nt8q]

第一部分我花了六個小時 我是初學者 老師說的非常好👍跟著視頻做沒有太大問題 講解得好細緻，謝謝老師

[@scaredsanty857]

i've never been so happy to make conspects

[@karljohnson1801]

By contrast I was not a ⁸good blended with me and

[@pradisedits5907]

Lesssss Gooooo. I was waiting for this! Amazing tut

[@themalcontent100]

I am learning a lot from this.

[@yiingkangtan4773]

This tutorial really suitable for Advanced learner , to understand more hotkey , also the way loops, extrude and subdivision work

[@burrakauchy3715]

Wait why doesn't the donut part take 16 episodes of 20 minutes to do ? :o More seriously, thank you a lot! ^^

[@3dgreenhorn]

Haha 😁

[@menawerabdulla6251]

Thank you so much this is amazing to follow and im learning alot from it, you might want to update the description to include the 3rd part, :P its still on "coming soon".i thought it wasn't finished, then i found it on your channel

[@3dgreenhorn]

Done, thanks for letting me know 👍

[@voly5141]

i've been ssing around on a friends soft soft for years, finally bought it. I found your videos and instantly subscribed and have been

[@riddletom2622]

Waiting for final part, love your tutorial video

[@John-cena-rolando]

I just passed part 1 and I'm glad to say I manged to follow up the whole vid.. Now im heading for part two wish me luck hehe😊😊

[@mundaneal]

This is great, my dude. I don't even have Blender downloaded. Never even made anything 3D before, but I am very interested to try.

[@3dgreenhorn]

Good luck 👍

[@dalicodes]

what I am understanding from these tutorials is most common modifiers are mirror, array, subsurf, solidify. You also need to understand bevel. The rest is just skill and your imagination.

[@ChrisB257]

So much to learn! Thanks again for the great demo. :)

[@maryamsattar9188]

for anyone having trouble at 15:44 (no circle mesh face for cup inset and intrusion ), select all top vertices and press 'F' to generate a face for it

[@siriabottaro7221]

Amazing tutorial, well done, well explained, perfect for refreshening the basics if you're getting back to Blender after a while. Just one thing though: i can't get the SHIFT + ] to work in any way... Has anyone had the same issue? Also, to move to Isolate View there's no need to press forward + slash. Just slash will do the job. Same thing to get out of it. Thanks

[@MadnessMatrix]

(SHIFT + ]) Maybe it didn't work for you because of the keyboard layout, search for it first in the keyboard, try to write the square bracket symbol ( ] ) as a text to see if the button you clicked on is the one for it, then use it in blender with Shift, blender has that shortcut assigned by default, but you can assign it Manually if that wasn't the case by going to: Edit > Preferences > Key Map (Ensure you're in the Name search next to the search bar) then type: ( select hierarchy ) without parenthesis, to see what shortcut is assigned to that action or to reassign it As for the forward slash, You're right you souldn't press on the Arrows (Up or right) then slash. This Slash (/) is called Forward-Slash, and this one (\) is called Backward-Slash or BackSlash

[@xmeygan]

I already can't wait to make more odd and fancy cups!

[@lucielmn9133]

Si ca ne marche pas comme sur la vidéo pour vous, à 9:55, c’est peut être parce que vous avez cliquez sur le « proportional Editing » mode 😊 Enlevez le et ça devrait fonctionner !

[@damislav]

some of steps are like magic

[@fabuloussmartreviews2990]

My first time watching I watch 1minute and subscribed immediately You are amazing..Sir.. Keep Aids Us🙏💕

[@melantheoszimurri9981]

Best donut tut ever

[@johnsummers101]

I am learning so much thank you! I used my donut from another tutorial as the donut for this table

[@PankekiSama]

ah, a donut! there's something i can definitely do!! thank you for this tutorial!!! so helpful for learning techniques ^^

[@mmavik]

Thank you, great job 👍, it's nice to watch. Good idea from gumroad too. I bought this course😀

[@3dgreenhorn]

Thanks for supporting 😊

[@pleochroic]

I see this is a faster donut tutorial. ;) Through all my anime watching I have resisted the cute, but these little rooms will make me a convert, *grin*.

[@Chaserbeam1]

Could also just use the spin option in edit mode and make 11 segments for the clock.

[@muhdzi]

this is game changer for tutorial vids..thanks mate!

[@anshultiwari1303]

Thank you so much for making such clear and understandable videos. Loving it.

[@jasperzatch610]

this was an incredible tutorial, thanks so much!

[@gnomechonky]

If you're adding a subdivision (subsurf) modifier and your object seems to "disappear" in wireframe mode, look at Preferences > ViewPort > Subdivision and try unchecking "GPU Subdivision." This setting appears to be linked to your machine's GPU and/or architecture-on my Mac, I had no problems with it checked, whereas on my Ryzen 3 PCs with a lower-end Radeon graphics chip, the modified object looked completely smashed. It was driving me crazy trying to figure it out!

[@farreljoseph]

I'm stuck at 9:22.. ( wall lamp ) how can you add or extrude it with the same shape when u shaped it down? ..when I shape it down it looks like it's skewed lol.. I hope u can read this message thx ;)

[@speedracer8724]

This is amazing I had to subscribe Im learning so much from this

[@scaredsanty857]

so much useful information here my head is about to blow up ahhaah thank you!

[@nilumadhavi9734]

12:26 it's not happening for me. Help me 🙁

[@gabisaintro]

Thanks you.. I m waiting for final part 🙏🏽

[@MIHAO]

amazing tutorial, very informative and easy to follow!

[@vroadrunner197]

your tutorials are awesome, but I have a question - Why does the Clock have only 8 hours?? :D

[@emrahy.849]

it was very nice..thnxx...keep ur modelling and rendering tutorials pls.. Thnxx🎯

[@TheQuiteCoyote]

My circle mesh for the cup is transparent when i Try add it it’s at around 15:45 does anyone know what to do? Edit: NVM I got it I put selected NGON

[@Steveo87662]

ctrl a then press ctrl b then ctrl f and ctrl f plus g plus z. Ok, press ctrl 6 and 3, then ctrl 5 and f, and then type y. Then press ctrl z plus p and alt 12567 for the cyrillic character N, then alt f and you have finally added a cube to the scene

[@Steveo87662]

extrude: how much? a bit! how much is a bit for you? 2ft? 4ft? 400ft????

[@alexmazvi]

Great tutorial

[@digitalsys5549]

keep up with these, its soooo helpful😭

[@sena1892]

this is amazing i am learning blender by using your videos

[@TheRealPinkWish]

12:29 rotation was not working for me although I worked in editing mode. I solved the problem via Object->set origin to 3d cursor

[@writteninthestars02]

THANK YOU!

[@betul416]

Hello. I'm new to blender and I'm improving myself by watching your video. But in 2:18 , I press e and s after extrude, but my model does not take shape like yours. Where am I doing wrong? I will be glad if you answer. I'm sorry for my bad english

[@Manusalsi]

Is the same for me 😭😭😭

[@AwhLynn]

It reminds me of one game where you have to build your own house with those little 3d rooms, but i forgot the name of it...

[@thianb]

when i try to do 0:28 and 0:42 it just moves the whole object, how can i fix this?

[@user-el5yj1ee2o]

im just going to be crazy when doing it

[@abdulsemedabdullah2039]

amazing blender guru make 16 video for one donut but yours 1 min

[@lulcake3357]

To be fair, blender guru goes more in dept with things such as rendering, shading, sculpting, even geometry nodes and a little animation too. Not just modeling.

[@len8351]

wonderful stuff

[@nilldeep]

Master 🙏

[@sunnatullohmuhammad9715]

Keep going

[@tilllyyy]

Great video mate 👏

[@3dgreenhorn]

Thnx 😊

[@battibek]

Hi! Your works was very useful to me, thank you😊 I saw that you did not apply after using subdivision and bevel. Should I do this and why?

[@Clara-hl3jb]

thank you a lot 😍

[@iktmx8567]

Could someone help me please. I have a question, why I can't directly DRAG LMB to adjust the object? I have to press B + click and drag LMB to activate it. I just wanna direcly click and drag without pressin g B

[@annguyennguyen8101]

can anyone explain for me from 1:00 , why he set the bevel weight to max, and then press 2 in edit mode ?

[@nophaseplayer8609]

I can't seem to do my coffee cup because when I go on mesh, and select circle It's just giving me like blink circle without a plane just as his then I can Inset and then E. Can anyone help me?

[@Delta_Aves]

1:07. Anyone else get a different result after hitting “copy modifiers.” I did it, and the figure is all curved with no edges.

[@ahmadresham3786]

Thanks Sir

[@syoloki.]

[@gritynity]

17:01 when i try to do the third extrude on the coffee cup (make the turn) it just collapses in on itself, can someone tell me what i'm doing wrong?

[@rushtuts]

Sir may i ask u this question , please tell me what is the rpm of Blender tutorial niches , and what's the average earnings per month. Thank you 👍❤ and good luck

[@ashleyc3397]

When I’m at the icing part, for some reason it’s not letting me scale the selected bottom vertices; it’s scaling the entire icing. What do I do?

[@sunairajaved8711]

At 0:31 what does he mean when he says in object mode shift select the wall. I can only shift select a wall in Edit Mode.

[@BUKAZES]

Hiii thanks for the amazing tutorial. I am having problems modeling the wall lamp since I cannot cancel the extrusion and then scale it… the right click is just nor working properly, is there another way of doing it? Thnks!!

[@missyasmin1891]

click extrude and directly press S, it works for blender 3.2

[@alanmartin9957]

At 15 mins, where you copy table and scale for the leg. My leg scales down but towards the origin of the table. when I try to scale the leg up in Z im getting weird geometry. Also when you scale the table centre loop, when i scale it tries to scale upwards toward the table top, not out straight? ive redone the table several times exactly but cannot find what im doing wrong? using blender 3.1 Thanks!

[@lucym2534]

Why is my alt+ left mouse not selecting the edges??

[@dafonsecaalexis5355]

Same here and Im on a mac

[@mustard3687]

5:10 wont let me put the x dimension as 1.5, it automatically makes it 0

[@Delta_Aves]

0:29. Does anyone know how to stretch the cube using the mouse, cause I can't figure it out. It just moves the cube.

[@user-cp8cz8ei6j]

It's hard to follow the shortcut keys instruction cause I'm using Blender 3.5.0 and every shortcut key is changed now. I have to find it every time. Is there any way to know the about the keys. If anyone knows the trick please tell me it's getting really harder and it consumes so much of time. I even tried to find it in keymaps of blender but its not there. Really need help to find them out.

[@gen-wh1yc]

has anyone figured out the curtain rod? when i move the subspace mod under the mirror, the two ends dont come together and i cant make the rod :[ edit: i got it lolz

[@ganapathyaiyappa3327]

13:09 I went into edit mode and used spin tool

[@vinodbirudula7724]

Can you make a new video using Eevee render since it was preferred by everyone for less render time. It will be helpful if you could make at least a single video. Pls

[@iamanillustrator3137]

how to clip in 4:05 i did it but faces are still going through eachother

[@ruchiou5228]

why at 1:21 i do the same but no any action? it still is sharp no in curve?

[@zaneberry]

same problem

[@zaneberry]

I figured it out -- click on the thingy you just made. Hold shift and click on the wall (this is key bc you need to have both selected at the same time), then do ctrl L and hit copy modifiers. By copying the wall's modifiers onto the thingy, the mean bevel weight being turned down should curve it now. If it still doesnt it is possible you are selecting the edges, but not the whole edge loops. You need to hold alt the select the edge loops. If that doesnt work, turn off "emulate 3 button mouse" in your preferences under the input tab

[@TheBlenderGirl123]

I need help on 5:50, I cant put a horizontal loop, it doesn't show, what did I do wrong?

[@TheBlenderGirl123]

nvm i got it but my curtains just rlly look ugly, can I do anything to change them without having to delete it

[@razvanbarbu1006]

why the animation crashes at frame 250

[@gaurigurri9229]

bruh this is gonna be my third time making the rod and curtain cause blender crashed twice when i switched to xray view after doing the curtain😭😭😭

[@peace.spot3212]

I hv a query in making rod plzz help

[@crazylara0702]

With the clock, the center always jumps to the currently active object, so I cannot rotate the cubes around the center of the clock. Any ideas on how to fix this? 😔 Thanks!

[@crazylara0702]

Ok, figured it out😁... for anyone having this issue: go to object menu -> set origin -> origin to 3D cursor

[@yuvallevi7523]

where part 3

[@higenfy]

I'm a little confused after I exit isolated view, everything is on 50% opacity. What do i do?

[@rimhohoful]

try alt + z to escape x ray mode

[@crazyroyalebaddiequeen9196]

11:04