Getting Started With Abaqus | SIMULIA Tutorial

[@harshitrastogi7880]

21:10 - Edit a part 27:07 - Create a material 31:02 - create a section 35:33 - create a profile 40:17 - create steps 50:29 - load 50:42 - BC's 1:01:13 - create a job

[@MAHMOUDETEMADDAR]

You are an incredible teacher, I enjoyed your teaching method, good pace, logical and organized

[@learnwithjeremiah6081]

Âllah is the Pagan God made by Muhhmmdh

[@gautamkulkarni7049]

The explanation provided at each and every step is apt and crystal clear. Enjoyed the whole video

[@onyiboemmanuel6060]

Your are not just talented, you are gifted in Teaching.

[@leonardoocchipinti8011]

Nice explanation with all of the calm that is needed for a beginner. I would just point one thing, when you digit 400 in "Pressure Load" i think you are putting 400 Pa in that surface that should be 0.003 m^2. It means that there is a load of 1,2 N applied.

[@mani771403]

The best tutorial ever. Thank you for making the learning process exponantionally easier. 😊It was the most enjoyable explanation I ever had, ❤ a real pleasure to watch and follow.

[@3dsSIMULIA]

Happy to help!

[@mani771403]

@@3dsSIMULIA Do you have a tutorial of Curcular Hollow section simulation? 😁

[@charlestoneoyoo]

Nice introduction. Just started it yesterday and I look forward to mastering this soon..I have really learnt much in this. Kudos to the explanations and clarity!

[@3dsSIMULIA]

We are glad it was helpful! 😊

[@ajajala5081]

Thank y'all for this post. They go through it so fast in class

[@3dsSIMULIA]

Hi Ayodamola, we invite you to join the SIMULIA Community where you can ask specific Abaqus related engineering questions: www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&

[@sivarao7126]

it is astonishing that I didn't get bore nowhere, loved it

[@amalms9201]

Was searching for so long....At last, found it!! wonderfully explained

[@al1bert._151]

I've never enjoyed learning more than this.thank you for the outstanding and usefull content

[@JaikumarSankara]

Exceptional explanation, much appreciated, and many thanks for this wonderful stuff

[@3dsSIMULIA]

You're welcome! We're glad it helped!

[@eldanekamani8539]

So fluent, thank for this

[@nadaeljouchine6474]

I liked the video so much, it s the best so far, i would love to learn more from other tutorials of yours once i find them, thank you for ur work.

[@3dsSIMULIA]

Thank you Nada el Jouchine!

[@0713059059]

This gives complete steps of Abaqus. Thank you so much!

[@ShashankEarth]

I am unable to open the software Pls help

[@Petroash1]

@@ShashankEarth you can download Abaqus 2019 from this link if you have torrent software

[@pawankumar6003]

Best tutorial ever, please make more on abaqus cae and explicit. If possible a bullet penetration through armour material. It will be of great help

[@3dsSIMULIA]

Hi Pawan, here are two videos on our channel that may be helpful in your Abaqus/Explicit efforts: bit.ly/2R6Jtw9 bit.ly/2Rr1xQp We also expect to publish similar videos 2020, so you are in luck and please stay tuned!

[@shazrielimran430]

GREAT tutorial video for a starter. Keep this up!

[@3dsSIMULIA]

We are glad you found it useful!

[@richardv9648]

Thank you so much, I wish I had someone to explaine this to me during my Phd study 10 years ago.

[@3dsSIMULIA]

We are so glad it was helpful!

[@AaRon231]

Great introductory video on ABAQUS - thank you!

[@tatianamartinezpantoja9395]

Good night, i need our help, i have a problem with the mesh when i use Assembly and use merge for a rectangule and a sphere, but when i try mesh the assembly, i have a problem, i need help, please

[@dextermagister2671]

awesomee, 1000 point to you sir

[@kamranali2270]

this is just awesome explanation for the beginners, thanks

[@3dsSIMULIA]

You're welcome! ☺

[@shubhammoudgil4753]

Best tutorial...today was my day 1 with abaqus...thank you so much sir for such a nice explanation❤

[@3dsSIMULIA]

Hi Shubham, we hope you have an amazing journey with us. We want to invite you to join the SIMULIA Community, where you can contact our experts and Abaqus peers. www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&

[@jaouadrahouani4975]

!!!!!!!!!!!!!!!!!!! PLEASEE HELPP !!!!!!!!!!!!!!!!!!! I have followed this tutorial step by step when I arrive at the Analysis part, I create a Job. When submittion, it starts to run, but a couple seconds later, the running is "aborted". Why is this? I think I have done everything exactly the same.....I am using Abaqus/CAE student Edition 2021 THE ERRORS: Error in job LoadedBarbellStand: A CONSOLIDATION ANALYSIS IS NOT MEANINGFUL BECAUSE NO PERMEABILITY DATA HAVE BEEN GIVEN. Error in job LoadedBarbellStand: DEGREE OF FREEDOM 8 AND AT LEAST ONE OF DEGREES OF FREEDOM 1 THRU 6 MUST BE ACTIVE IN THE MODEL FOR *SOILS. CHECK THE PROCEDURE AND ELEMENT TYPES USED IN THIS MODEL.

[@premasirikarunarathne5893]

Thanks a lot, sir. great explanation and performance through the complex tools.

[@dandado816]

Great Video, one of the best on KZbin for beginners, Detailed with lots of info and discussion 10/10, thank you

[@bitazzzz]

It was an amazing tutorial. Where can I find the next level tutorial videos that he mentioned in the tutorial above? I really need them.

[@西郷りあん]

Where can I download the Japanese version of the Abaqus User Manual?

[@nekajcasa]

At 53:43 pressure is defined as F/A (in Pa) not in Newtons... Great video!

[@UsmanSaleemSulehri]

Came to comments to see if it's a mistake. Magnitude of pressure can be 400 if we assume it's on a meter square but doesn't seem like it.

[@MrLyin5]

@@UsmanSaleemSulehri I thought it is in Newton as "uniform force" to apply on that surface and it is Abaqus to calculate the area and then associated pressure based on force input...

[@vishalrana9836]

where can i get rest of the videos of this playlist?

[@vedantambekar5771]

Excellent tutorial !!!! Thanks for sharing...

[@wimalsri8232]

Thank you very much. Your presentation is superb!

[@kimiiazavareh2612]

that was AMAZING !! thank you very much

[@mostafanakhaei4916]

Hi Thank you for your fantastic tutorial. Can you provide the links that continues this lecture? I couldn't find them in the channel. I would like to have more in-depth knowledge of working with ABAQUS

[@UsmanSaleemSulehri]

Did you find them?

[@BanuMusaGr]

@@UsmanSaleemSulehri ?

[@UsmanSaleemSulehri]

@@BanuMusaGr I didn't

[@clapillon9649]

Why is the von mises stress is in E+3 at the end?? That's enormous isn't it?

[@xiaojingye7887]

There is a little bit confusion in the software, how the pressure equals force and use the newton as unit?

[@이규하학생공과대학기]

This tutorial video helped me a lot. Thanks. :)

[@3dsSIMULIA]

Happy to hear it helped! We invite you to join our SIMULIA Community: www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&

[@sansok7827]

I try to create a new model database and choose With CFD Model ,but instead of with CFD ,I see With electromagnetic Model .What should I do ?

[@fathialhussadi5378]

Thanks, can u please create a list, number the videos, or tell me which video should I watch after this. Looking forward to hearing from u

[@mwncrypted]

Fantastic video! Thank you so much for posting it. Incredibly useful.

[@ericstrauch6054]

Very nice thorough tutorial. Thank you.

[@sahilmulla4678]

Thank you Sir. Could you please make one video on Road Tunnel. I need help with blast analysis on the tunnel.

[@muhammadjunaidjamil3224]

Sir how to apply real ground motion data taken from PEER Ground Motion DataBase in Abaqus??

[@habotare-pn6db]

You deserve my subscription❤

[@3dsSIMULIA]

We are glad you enjoy the content! 💙

[@SumeetSahani]

You wanted to apply 40kg(400N) as weight, but you applied that in the "Pressure" category. So, that would mean, you applied 400N/m2 on that face, not a weight of 400N, right? Or am I missing something? I just started to learn Abaqus, which is why I am getting a little confused.

[@zazzzzzou]

You're right and can refer to the Abaqus documentation by selecting the "arrow+?" symbol and clicking on the "Magnitude" field while editing the load.

[@brucelee1048]

Thanks a lot. Amazingly explained. How can I find next videos? I checked on the channel but can't find anything

[@arqta.justinaviolamirande4403]

Excellent video!!

[@Engr_7799]

I'm going to model a masonry wall in abaqus for simulation purpose, i have a question that should i select Deformable or discrete rigid in the type during creating part?

[@anutseksharma2811]

very nicely explained, where is the link to next videos after this?

[@whatisleansixsigmabydr.sal4884]

Excellent job. Thanks a lot for it. It's very well done.

[@samaypatel9634]

Shouldn't density of steel be converted into N/m^3 ?

[@lianne9431]

Incredible, thank you!

[@AkashDeep-st6ms]

Excellent explanation. 👍🙏

[@3dsSIMULIA]

Thank you, Akash! We invite you to join our SIMULIA Community - make a profile, explore the 3DEXPERIENCE Dashboard and connect with your peers! www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&

[@triggerCIVIL]

What about geometry steps that we create in assembly

[@matthiaskohler4360]

I want to simulate a push with a stamp into a foil (deep-drawing). Which type for selected step is appropriate? (The movment should will be made by the stamp). Thank you!

[@3dsSIMULIA]

Hi Matthias, we recommend joining the SLC and asking our community of Engineers on the 3DEXPERIENCE platform: go.3ds.com/SimuliaLearning

[@pawankumar6003]

Can you tell about increment and step module, how to define them and what do they physically signify in abaqus explicit

[@raphaellim5815]

Thank you for a good tutorial.

[@Anon-rb2mr]

Isnt the unit of the Load defined incorrectly? you said 400N but ABAQUS requests pressure. In your units, wouldnt that be 400N/surface Area of surface where pressure is applied (in m squared)?

[@brandynskulina7074]

I'm in my final year of mechanical engineering school and for my senior design project we need to simulate a golfers swing with and without our prosthetic design, can this software do that and or do you know of a software that would be best for the task?

[@3dsSIMULIA]

Hi Brandyn, please reach out to our sales team with your specific question regarding the task at hand. Please note, there is a free version of our Abaqus software for University students. www.3ds.com/how-to-buy/contact-sales/

[@paklhr-e6i]

Hi, thanks for explaining everything in detail. Very helpful indeed. I wanted to ask u about the pressure force, You have applied 400N on an area, for a 40kg Barbell, weren't u supposed to convert this force in pressure as per the selected area? Please clarify. You response would be much appreciated

[@NachNRB]

Yes he should have, I think it’s a mistake, although it does not impact the tutorial itself.

[@vinil94l2]

He goes to pressure option > Select some area > Give the force to be applied in that area. The software finishes the work.

[@NMKM25516]

Why take half the weight of the barbell?

[@leonardoocchipinti8011]

Hi, can you explain me how to get compression values with the sign minus? this software give all the information about the stress always with the plus sign, why? A link to a page where there is this explanation is useful too. Thank you

[@3dsSIMULIA]

Hi there, we encourage you to join the SIMULIA Community where you can connect with software users, experts and pose questions: go.3ds.com/YRy

[@Roni24mamba]

Great tutorial! thanks

[@amandagoncalves2730]

Hey, one question: once you apply a Boundary Condition to an early step (the FixedToGround in the Initial Step, for example), the BC is automatically carried over to all subsequent steps? Anda thanks for the video! :)

[@gianlucavacca361]

what is the difference between tosca ad atom? it's the same thing?

[@johnsonbrown5735]

Brilliant, Magnificent.

[@3dsSIMULIA]

Thank you Johnson, glad we can help!

[@bouafiaabdelhak2386]

thank you very much for your tutorial

[@many_worlds]

that rounded play logo is so 90's, I think you should update it to a more flat, minimalistic modern version

[@vipulkumar947]

very nice sir......please make furthur videos also

[@ShashankEarth]

I have installed it but I cant open the software. Please help.

[@dawitmolla6034]

very helpful Is there any video continued from this ..thankyou

[@3dsSIMULIA]

Hi Dawit, glad you found it helpful. Check out some of our How-To tutorials for Abaqus found on the 'How-To' playlist.

[@hamidboudaghi6789]

Thank you for your video, Please guide me how can I modeling Bridge and Dam ?

[@simtes2009]

Your tutorial video gives a complete steps and really good idea on Abaqus. Thank you. Please can you prepare tutorial for a simply supported four-point bending of Timber-concrete composite beam?

[@alisafieh8795]

Where is the rest of the series, please?

[@chirdeepnr4000]

Can you please give information about modelling of gabion walls using abaqus?

[@MrGabry83]

sorry but the comand undo were is?

[@melatnigussie6436]

Thank you so much!

[@chickensquisher]

Great explanation, thank you

[@sanagulzar7436]

Great video! well-explained! Can you explain the exaggeration part in the results? the multiplication with a factor to increase the deformation. Is it explained in any next video? If yes, kindly give the link thanks!

[@3dsSIMULIA]

Hi Sana, Thank you for your input! We encourage you to join the SIMULIA Community, where you can join for free and pose additional questions to a community of SIMULIA engineering peers and technical experts. Here is a link to the community on Dassault Systèmes' 3DEXPERIENCE Platform: eu1-ds-iam.3dexperience.3ds.com/cas/login?service=https%3A//r1132100503382-eu1-3dswym.3dexperience.3ds.com/

[@sanagulzar7436]

@@3dsSIMULIA Thanks! will join :)

[@nadillamentari8895]

If you use pressure for the load, can you plot the load-displacement curve? Or is it have to be from concentrated force? thank you.

[@aadityasuratkar5973]

Amazing video, thank you. I was looking for some videos helping me implement damage in composite materials. Do we have those resources on internet too? I could not find them on your channel. Any lead would be appreciated, thank you.

[@3dsSIMULIA]

Hi Aaditya, we invite you to join the SIMULIA Community, where even more tutorial content is available and you can network with peers and technical experts. It's free to join! www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&

[@aadityasuratkar5973]

@@3dsSIMULIA Terrific, thank you. Shall be done!

[@zaherbn2882]

Thanks guys

[@dipeshjaisipoudel9543]

Its great, everybody does modelling and shows contours, its not what everyone needs, we need results and interpretation . This is just a basic.

[@ghazialobaidi2218]

Thank you

[@aswinsuseel4625]

Thank you for this.

[@sullyB9]

Audio is a bit sharp hurts my ears but well explained I have had fea experience with ansys which is similar but needed a refresher

[@moralesfabricio]

Thanks it was very usefull

[@medgham3246]

Hi, thanks. Great job.

[@ahmeds9346]

very helpful thank you

[@adikamaja5694]

Thankyou so much sir

[@manueldario3755]

very good

[@mustafaali7907]

Thanks so much

[@pawankumar6003]

Where is set B or other videos of playlist?

[@3dsSIMULIA]

Thanks Pawan! We look forward to creating more tutorial content as well.. Stay tuned!

[@diegolucarini5302]

Dear all, I would like to know how to mesh an IGES gemetry * .igs file imported from another program. Thanks. Diego.

[@elisavudar]

Nice tutorial, and the next?

[@fathallahmazroui]

thank's so much

[@farhanaffandi975]

bro can u email me the file

[@clintonchijioke1]

great

[@shivambadoni26]

THANKyou

[@engineeringworld3912]

good