3rd Gen RAM gets 9” touch screen radio. Apple Car Play/Android Auto

[@IsaacGarcia-cz1es]

Can you please make a video showing how you weird the old wires to the new radio

[@82_Seconds]

Where did you buy the mounting kit and how much was it?

[@scottwaynewootton731]

Why do I have to watch you unwrap and do everything one-handed? Don’t you have a tripod you’re just opening a package

[@stuNzeeDkcuS]

Cmon now Scott you been on this earth to have a little more patience than that lol jk

[@pandorin2348]

🤣🤣🤣

[@richardbates2367]

Jensen xa series built in power ground and remote wires i had a very dependable xa1000 200watt silver color amplifier like your amp. In a 78 Chevy c20 custom cab trim farm truck i had...

[@JayRays1truck]

Sounds like it was a good system

[@motardedbikes6062]

Do you have a link for that radio

[@JayRays1truck]

I looked. I was not able to get the link to copy for some reason. There are several options on Amazon if you type in Rimoody 9 inch radio. It looks like this particular one has gone up to $89 from when I purchased it back in June at $72. They have some others that start at $63 which say Apple car play and Android auto.

[@richardbates2367]

Hmm neat well I hope it is very helpful for most and I am not anyway but my truck is not a gen 3 ram but a late gen 2 magnum V8 gas truck

[@austin.taylor1719]

How did you get your back up camera wired up?

[@JayRays1truck]

I had to get an additional RCA cable for the video with an RCA to RCA adapter to connect the 2 cables. Then I also had to add wire for the positive (red) 12 Volt from the radio. I tied the signal for the reverse input to the back up lights.

[@GIJeaux1]

What's in the bag? I sure hope that it's a tripod.

[@Droobie420]

Burn

[@ACT-co4nk]

how is the radio standing up .. does it lag? hows the sound ect ? would you buy it again or get something else ?

[@JayRays1truck]

The radio is doing well. It is okay at doing 1 thing at a time. You have to let it fully boot up before connecting your cable to your phone for using car play. The sound quality is good, but I also added a DSP in my truck so I have more control over the sound. I have the EQ on the radio flat since I am using the DSP. I would buy it again for the price, but when I get the money, I will probably upgrade to a nicer unit. I am looking at a Pioneer but it is around $1,500.

[@AlexCortez-q2u]

I dbt have power to mine what to do

[@JayRays1truck]

Probably need to check fuses. You should have 1 power source that is a constant 12VDC and 1 that is on only when the key is on.

[@richardbates2367]

Hmm i have a premium infinity by Chrysler am fm CD player cassette tape player stereo and it works great but I got it used it is identical to what the truck would have came from the factory with the stereo is from a seller on eBay and it was fully serviced it has been internally cleaned and all solder joints checked out for bad spots and cracks, and the belts are both replaced used contact cleaner on all the knobs and slides, and all new led lights and was fully tested, and that includes testing it in his jeep zj. Anyway i also have bought one of these c and a auto radios mine came from AliExpress it was the cheapest one available.... it's a single din mp3 player 5188c i believe it is the part or model number....

[@JayRays1truck]

@richardbates2367 Hmmm. I made this video to show what I did to my truck. I hope it helps someone who is thinking about doing the same thing to theirs. If you like the radio you have, which it appears that you do, I’m happy for you. I wanted bluetooth and Apple Car Play in my truck, and this was one of the least expensive radios I found to accomplish that. Thank you for watching and commenting!

[@lipis_ty9060]

How can I get this one