4 Bucket PRP Suspension Seats Review and Install Jeep JK

[@MrSpitfireMustang]

Videos like this are why I want to go from Defender to Wrangler.

[@babydove]

Sir can you recommend good sound deadening, thanks

[@rgs455atw]

Nice to see quality Jeep products made in the USA. Great video.

[@Canye]

Another great video, well put together. organized. honest. and in depth review of a great product. My Jeep is brand new but seats are on the short list of upgrades i have left to do. I will definitely be considering PRP. Keep it up TrailRecon! one of the only channels i praise this way.

[@TrailRecon]

Thank you very much, I really appreciate it!

[@DudeGuy1973]

Very cool seats. Making me think more about buckets in the rear now. Quality stuff.

[@RockTrooperJeep]

DudeGuy1973 the rear buckets are a unique look for sure, really gives it a custom setup. When the rear buckets are in, the seats are more centered and a bit higher so you get a stadium seating feel.

[@TrailRecon]

The buckets in the rear are so nice and the leg room you get is amazing!

[@smurik1]

Wow I need these seats for my JKU

[@davidwitcher5443]

Biggest deal people are having with this upgrade is what to do with the factory under seat wiring and sensors. What did you guys do to remedy that issue?

[@TheBeardedJeeper]

those look like great quality seats for sure! I would love a set of these

[@michaelmathis1961]

I am getting to really like your site, Brad. You show many different things that not only can be applied to 4X4's but other type of vehicles as well.

[@MrFivepointfivesix]

Yeah Great Video Soooooooo ya kinda skipped over an important step, 🙄 What Did You Do With The WIRING HARNESS AND HOW DID YOU SHUT OFF THE AIRBAG LIGHT AND SEATBELT LIGHT 🤔

[@rayantar3181]

Yeah no kidding!! Just installed mine yesterday and dealing with that chime now. Did you figure out a way? I'm hearing you can connect the yellow and black wires underneath but I only see those colors on the harness attached to the old seat. I can really use the advice if you know

[@johngray7006]

Found my new seats!!!! Thanks!

[@jimmcconnell9048]

great videos!! I'm a big Jeep enthusiast and I'm on every night on youtube looking at Jeep stuff. I immediately go to my subscribe to see if you got anymore videos...great stuff! keep it going!!

[@TrailRecon]

Thank you I, hope to keep bringing you great content!

[@miguelorozco7494]

Hi, only a tiny question that I can't get clearly, what happen with the electronic? I mean the sensors under the seat and that stuff? Does it generates trouble codes in the dashboard?

[@RockTrooperJeep]

Yes, I am still looking for ways to clear the airbag and seatbelt alerts. The seatbelt will be an easy fix by simply attaching the connector.

[@OVRLNDX]

Another great well done video! Awesome!!

[@TrailRecon]

Thanks you sir!

[@neftalifranco97]

Can the rear seats fold down like the factory ones for extra storage in the back??

[@seancassinelli7986]

What did y’all do about the airbag sensor?

[@123jeepguy]

You should do a review on the seats on how they held up. Please and pretty please thinking about buying some but want to know how they hold up

[@PeterBinns]

ya got free seats! yeah!

[@niz308]

wish i could get these here in Australia

[@RockyXTV]

Awesome video and great looking seats! When will we see a set in your rig?

[@justinfaries6641]

Love your videos!

[@TrailRecon]

Thank you!

[@woof3598]

I would love to find a rear seat replacement for my Wrangler that doesnt weigh a million pounds and I can get out wit out killing my back when the top is up

[@TJ.1]

I have a back injury back in 2016 from my dirt bike, I bought my JK brand new in 2013 sahara, added 35 and 3 inch complete kit ( built for DD and dunes , no rocks where i live). However I cannot ride my jeep for more than 30-60 minutes without hurting my back, and should take atleast a 2 minutes walk before jumping again. I dont have local shops that sells seats for the JK except for the plastic bucket racing seat with minimal cloth. I need the most comfortable seats with lumbar support ( i dont care about the looks or how sporty they are) , i am a short and slim 5.7 and 135lbs. Since I cannot feel, try or ship them back. I have to make sure they are good for my back before I purchase them. I really love my jeep and i wont sell it 😊. Any help would be really appreciated. Thanks 🙏🏼

[@trinkladd]

Would recommend using grade 8 bolts on all seat hardware!

[@kittysch2]

You just had to make this video. You just had to inform me. And I just had to go and buy them from Josh at PRP. When will the buying stop????! I'm in the dog house. 🇺🇸👍

[@TrailRecon]

Congrats on your new seats! Not my fault... LOL!

[@forrestrichardson8891]

do they ship international to other countrys? great video

[@DanielSawn]

How did you guys correct the Airbag and seat belt lights?

[@apexpredator_jku]

Seatbelt is easy fix...take green and black wire from harness & bridge them to one another. Air bag is a whole different ball game. You need resistors...basically you're tricking the computer into "thinking" stock seats are still installed

[@vinnyh8754]

Nice seats

[@ThomNguyen-vh4sz]

how did you do it can you share with me , thank you

[@dr.shafique-ur-rehman3053]

Have you marketed seat with hydraulic or air suspension seats for jeep?

[@LenSilvester]

Great video and install tips. There is no mention of the factory seat side air bag or crash sensor module wiring that is part of many newer JK seats. Do the PRP seats come ready to connect up to the wring harness that is laying on the floor?

[@RockTrooperJeep]

Len Silvester they do not. The seats do not have any connectors for the OEM plugs.

[@LenSilvester]

Thank you John. Do you know if PRP is working on this? I would think removing part of the factory seat safety system could at some point cause a malfunction in the airbag system and cause a lot of liability problems if the vehicle was ever in an accident and someone was hurt because they system was altered?

[@RockTrooperJeep]

I do not know if PRP is. When I was shopping aftermarket seats I had not found anyone that made suspension seats that have the built in airbag functions to mate up to the OEM setup. Possibly as the JK matures and the OEM seats start to wear/become more uncomfortable, that we may see a step up in the demand for vendors to connect up to OEM plugs, including the airbag setup.

[@justinconstant3840]

@@LenSilvester We do not have plans to do this. Even 3 years later. The seats are intended for off-road use.

[@ericc6737]

Great Video. I was wondering if you lost head room. I'm a little over 6'5" and I don't have head room to spare. My stock JK seats are in need of an upgrade. again great video and keep them coming.

[@colin1528]

they sit 2 inches lower than stock. atleast that's the way they sit in mine.

[@henryporter9669]

1000 hours of UV protection is only 41 days. If there is 10 hours of sunlight in a day that would equate to 100 days. Does that mean the 700-1000 hours of UV protection would wear off after just 100 days in an open top jeep?

[@scottb.innovations4386]

is there a uv problem at night. so then if you use sunrise and sunset it more like 90 days

[@neilmarshall4927]

Do the +2 inch wide seats fit in a JKU?

[@machinespeed6916]

Any idea if that rear seat bracket will Work with a genright cage with x brace?

[@feellnfroggy]

what exactly is hte suspension part of 'suspension seat'?

[@ogpapi2298]

When installing the seatbelts, did you disable the seat belt chime? Or how does that work with the JK when installing 4 point or even 5 point harness

[@Gedalneil]

How about airbags on JK. Is there a fix? Thanks

[@richardmawmd5174]

Is there a way to lower my driver's seat? I love my Jeep Wrangler, but I'm 6"5" tall, and I really wish I had a bit more head room. I'd pay dearly for it, haha!!! I love the rear bucket seats!

[@justinconstant3840]

little custom fabrication would have to be done. I'm 6'5 myself.

[@MrSpitfireMustang]

Three thumbs up!

[@stedmans4christ]

Why do none of these seats have the height adjuster??

[@youn911]

Love your Videos!! Whats the price like?

[@jasondevereaux3369]

How comfortable are the seats now? Update????

[@ac2fv]

Do the install brackets allow for the seatbelt to be reattached? No seatbelt is a no-go for us guys with a daily driver.

[@abnpthfdr2934]

What did y'all do with the stock seats that were taken out. If they were in good condition, I could sure use them. They are black and I'm sure they're in better condition than my GRAY '09 stock seats which, by the way, are falling apart... to the point that I'm vaccumming foam residues off the carpet all the time.

[@alandavisphoto]

Hey, these seats look great! I was wondering though, how far forward do they fold forward? I'm wanting to design a 1-person sleeping setup in my 2-door and I need the passenger seat to fold all the way forward - do you think these seats would do that?

[@justinconstant3840]

It folds almost completely forward.

[@tomoconnor8431]

Love your hannel

[@cavediverjc]

Great video. (Like usual) Are they planning on running harnesses on the rear seats? Just curious. This looks like a great mod.

[@TrailRecon]

Yes, we just installed the harness bars and 5 point harnesses 2 weeks ago... short video on that coming soon. Thanks!

[@stephenreynolds1376]

@@TrailRecon Did this video get made?

[@rspading]

How much cargo space do I lose with a setup like this? I have an ARB fridge mounted in the back that comes close to the rear factory bench, but looking for something similar to this without losing the fridge.

[@JVIMTM]

Any seats for an xj?

[@DwayneCasad]

can these be on an adjustable slider of some sort? for the 2nd row? I have car seats

[@RockTrooperJeep]

I was thinking the same thing. I have been looking for a set of sliders, like I use in the front and mount them onto the rear mount.

[@adamferrell882]

TrailRecon-- Is this seat compatible with 2006-2010 Ford Ranger/F150?

[@TrailRecon]

Sorry don’t have that intel, recommend giving the folks over at PRP a call. They have lots of different applications.

[@talezfromthedashcam3138]

What about the back seat collapsing forward? I need my "lay down" space in the cargo area. ;)

[@RockTrooperJeep]

The back seats will not fold flat all the way down if you have the front seat all the way back.

[@talezfromthedashcam3138]

RT, you got these? I dont think the stock rear seat collases all the way with the front seats back

[@RockTrooperJeep]

Correct, they will not. The PRP seats sit higher then the OEM seats and when the rear seats are folded forward, they will not lay flat/flush like the OEM seats.

[@talezfromthedashcam3138]

Bummer

[@talezfromthedashcam3138]

ok maybe 2 fronts in the future...

[@funkydodo149]

Why don't you guys put the carpet mat (the main floor mat) back under the seats?

[@RockTrooperJeep]

I debating options at this point. The tub has been completely lined with the LizardSkin products for heat and sound, however I am thinking about replacing what was the carpet with something....still doing some research here. Any suggestions?

[@funkydodo149]

RockTrooper the Jeep look so empty on the floor without the carpets. I would just replace them with a new set, now the jeep got a bit of a rally feeling to it without the big floor carpet.

[@RockTrooperJeep]

Funky Dodo yes, looking at the Bed Tred product as an upgrade to the factory carpet look. A bit pricey though.

[@scottzeitler]

I absolutely love the PRP seats, and I am about to begin an install on $4000 worth of seats. Why is it no one gives really any information regarding mounting the factory seatbelts, or the 4.3 harness. I have both, what’s up? Is it illegal thing? I am just trying to find the best way to incorporate the fact receipt belt for normal driving, and the 4.3 harness for off-road. Does anybody anywhere have any information or good videos to watch on how they did it, or an installation video?

[@michaelmathis1961]

This may be the place to create seats that are easily removed and installed in your jeep!

[@heavymetal2320]

I love your videos! Not a fan of those seats though, vinyl is not the right material IMHO and the many brand names/logos embroidered in are a deal breaker for me.

[@RudyC27]

5:45 Almost lol

[@duneattack]

The PROBLEM with this video (And I'd like to qualify this statement by saying this is the only problem I've EVER had with any of Brad's videos) is that this video doesn't address one of the most important and frustrating issues with after market seats: The issue of reattaching all the seat and belt sensors so that the air bag system operates correctly. Can anyone direct me to a tutorial for dealing with the airbag system when installing aftermarket seats?

[@stephenreynolds1376]

Did you find out about this?

[@robthewaywardwoodworker9956]

Hey man, you guys all seem to be in the know with all things Jeep... great video BTW... I installed some of the Smittybilt SRC seats in my 1989 YJ and they were so much thicker than the crappy old seats that I couldn't even get my legs under the steering wheel. I swapped out the stock column for a like year Cherokee tilt column and solved that part but the next problem was the seat is just high enough that I can't comfortably reach the freaking pedals! WTH! So anyway, you guys do lots of custom stuff and aftermarket add-ons, I thought maybe someone out there may have a solution to this. Thanks and keep putting out those videos! (the new beadlocks look boss).

[@TrailRecon]

I hate it when you add something new and then it creates a new problem... I've been there, very frustrating sometimes. Hope you are able to find a solid solution. Loving my new KMC deadlocks! Thanks!

[@ChrisGrantForReal]

Link to ripping out the interior?

[@TrailRecon]

Opps,, sorry about that: kzbin.info/www/bejne/rofGdK2AfMh-oqM

[@flymukund]

Nice video, but a little too much music

[@RocHopn]

These seats are at least a $2k upgrade. Although seats are important for comfort i am sure the money can be spent better else where and choosing viny, yuck!! You would sweat your rear off in the summer and freeze it off in the winter. I guess the sponsorship gremlins jumped out again to try and open up your wallet!! Good grief!!

[@DanielSawn]

The vynal has the same charactorstics as stock leather. And even more ability to resist weather, water, dirt and mud from damaging the surface than stock leather. I swapped from my stock Rubicon leather to 4 custom buckets as well, and it was worth every penny.

[@schmonkeeshomky5386]

Just Empty Every Pocket. (Jeep). The worst thing that ever happened to a retirement fund :)

[@cheesefiend8361]

I’m gonna need a taller cushion since I’m short 😂😂

[@davidjessee7701]

Moose probably not. I believe they sit up a couple inches

[@bruiserbrown9258]

should have gotten some Mastercrafts ;)

[@123jeepguy]

Is that all lizard skin product in the floor

[@rdizzo1313]

The logo is horrible. Do something low key. Like a Roku Tag.

[@michaelogrady2867]

Your ignoring a big problem by not addressing the airbags problem.

[@brianmckenna3915]

Suspension seats, I don’t think so.