4 Cylinder Supercharged Wheel Barrow Gets Custom Side Pipe Exhaust and Dashboard!

[@CarsandCameras]

Go to buyraycon.com/cars to get up to 30% off sitewide! Brought to you by Raycon.

[@Jomama1993]

Hey John and Isaac you guys should put a 90° boot on the supercharger pointing the carburetor forwards acting as direct cold air injection put a pointy Chrome or Rusty air filter on it

[@Bartskarts]

Flamethrower the exhaust...... Like a certain project in the past 😉😉

[@dustinadams7003]

Congratulations on the first 🥇 place

[@realamerican911]

Think about maybe sliding on a heat shield for the exhaust on the left side. You don't want to heat the belt up.

[@Zane.Wellnitz]

My favorite build as of yet. 🤙🏻

[@PaulineNewton-z2d]

John, you could not have performed the side pipe/lake pipe any better. It sounds wide open and has the right tone for that ride. This build is excellent and continues to improve! Bravo to all of you!

[@topshopbuildandfabricate24]

Yep I had a custom performance shop and we did custom exhaust and you doing it all from scratch is a difficult and takes forever most of the time we had mandrill bends x pipes and y pipes so what you did on the exhaust shows how yalls skills level have advanced to. I trained guys how to do that stuff and it takes years to really get good at it and some guys just don’t have the motivation or patience or can’t get past a certain level I give yall a over all grade of 92

[@UndeadSo1dier01]

I know what this needs. A hitch and custom go kart trailer for....THE RAT ROD GO KART.

[@IndianaDipper194]

that would be too sweet

[@yagerontop4103]

Bump this up man that be sweet

[@mikethompson2137]

They could take it to pate, so someone could ride in the trailer.

[@sharkbaitouahha_gaming263]

Please make this happen. Would be the coolest thing at the swap meet.

[@mross302]

Up the blower speed a bit, lean out the carb a bit and boom you will have blower surge and nasty power. Wicked build boys, keep it up!!!!

[@CarsandCameras]

Thank you sir! We’re gonna do some boost tuning next episode!

[@mross302]

@CarsandCameras no problem buds, you guys rock, love the build. I'm a frostback lol aka Canadian, so cvt and boost are my life lol. God bless race sleds 😆 🤣 😂

[@Rob1970s]

This is why we luv car's and cameras ❤ !!!!

[@topshopbuildandfabricate24]

Yeah if yall could get it to have a nasty surge that would be awesome.

[@marcd5353]

The Subie RUMBLE!! My life is now complete

[@Rob1970s]

Yes it's exactly the same song !!! Those lake pipes are neat ! And they've turned golden with the heat😮 this is why I love car's and cameras !!!!!❤

[@Gokartrider]

I love the way this absolute unit is built! I’m 14 and I’m inspired by your work

[@CarsandCameras]

Awesome man hope you can make it out to mini mayhem or pate swap meet sometime!

[@davidsolomon915]

Thank you for grinding millscale John!!!! But stainless should be back purged with argon... Without it you will get sugaring on inside and joint could become weak and crack.

[@johnb3240]

Ya beat me to it

[@208Concepts]

Given their inexperience, they should purge, as it helps with penetration as well. I usually say "it's exhaust, not aerospace", though. It's gonna look rough eventually, regardless of what you do.

[@jeffreylong9405]

It’s not a nuclear reactor 😂.

[@davidsolomon915]

@@jeffreylong9405 why do anything half ass? And it's good practice for when they start building rally trucks

[@GuntherVonB]

I appreciate how you both wear PPE in your videos...simply because you are setting a good example for anyone watching and wanting to do any fab work of their own. And...awesome build!

[@Biokemist-o3k]

THE DICE KNOBS COMETH!!!!...really awesome build and even better videos!! Thank for inviting us into your shop with you...-John

[@josephwantz4035]

I really think you guys should take it down the drag strip and put it up against the Drag rail

[@CarsandCameras]

this thing would get smoked by the rail but I'd be interested to find out!

[@josephwantz4035]

@CarsandCameras that's what I'm talking about ✅I love watching your videos u guys give me hella inspiration to work on my project's

[@Rob1970s]

This is why I love " car's and cameras " This is Why !!! .

[@CarsandCameras]

Thank you!

[@Rob1970s]

I'd love to see a grill on the front with some freestanding headlights !!! And maybe an airoscreen type windscreen for added astetic joyfulness ☝️😆

[@rexhorning7228]

Like the zztop grill.

[@wildliferanch3665]

Legit my favorite build of all time! One of the coolest builds on youtube😎

[@Jomama1993]

Hey John and Isaac you guys should put a 90° boot on the supercharger pointing the carburetor forwards acting as a direct air injection and possibly a pointed air filter

[@pepethefrog7193]

And placing the charger straight over the intake, would look great!

[@frigglebiscuit7484]

it actually pushes too much air through the carb and upsets the vacuum signal.

[@seanathanq]

nice, we used to do the same setup for putting the style on the dash, only difference is that we wrapped the bit in tape so it kept it tighter and more consistent

[@larrydavidson3402]

That is one sweet sound coming out of those pipes.

[@michaelhill4015]

When you first started this build, I was skeptical, but wow, that thing is sick!

[@MultiKelly85]

John, you COULDNT have done a better job with the lake pipe/ side pipe. It has the correct tone and wide open sound that suits that ride. 10 out of 10 on this build and it keeps getting better! HATS of to you guys!!!

[@JohnHill-jm7tm]

This Old Man from Washington NC enjoying and laughing 🤣. Y'all are really amazing with your Dreams 😍. John I'll be seeing your Dad tomorrow ❤️. Most of our time together is talking about you and Isaac 😅. Love You Guys. 🛵 🧔💝💝💝

[@Gokartsandstuff82]

Absolutely love this build, and it’s coming along quite nicely

[@Barracudalou]

This is your best build to date in my opinion !!!

[@jimbagle.3939]

I like this build a lot. That is all.

[@TestECull]

10:18 less zoomies, more lake pipes, but I love it. Lake pipse are 100% hot rod!

[@rexhorning7228]

I would agree with the lakeside pipes.

[@TheNewSchmoo]

That exaust is bang on , completes the look nicely

[@darylSKYTZOwillis]

Rub WD-40 on the hot exhaust pipes for a golden tint. Favorite song while hot lapping Private Pile is “Jesus Built My Hotrod”. 🧟‍♂️

[@firefighter3b]

Use a 2” dia Roloc scotch right pad in the drill press for dash works well.

[@greylocke100]

When I look at Isaac sitting in that my first thought is Herman Munster from the Munsters and I know it doesn't look like it, but I keep thinking of the Dragula.

[@shk2564]

That’s exactly the exhaust I was envisioning! Love this project! ❤

[@brianz367]

Super cool kart. The orange, and pink really clash though. Maybe go retro black or Grey primer.

[@ManiacRacing]

Now you're talkin'! Sounds excellent! And WD40 is the secret to those cool looking pipe colors. Wipe it down before running and the heat will give you the color. Reapply as needed. Beware of handprints and clean the pipe very good before running as well since greasy handprints will show!

[@SuEnRoD]

That swirling you made on the dash is awesome and is called Perlage metal finishing.

[@rexhorning7228]

I have also heard it called jeweling.

[@frigglebiscuit7484]

its also called "engine turned"

[@n3glv]

A nothert way to make that simulated machined look is a chunk of dowel in a drill with motor oil.My shop teacher taught us that one!

[@Robert-ni6ut]

This build is just to cool 😎 and the exhaust headers look great and that dash bord great creativity Ike with the spun aluminum 👍👏

[@lukelikens2057]

You should weld steel skid pads to the bottom so you have something to hook on the ground and when you get going you can drop the back shoot sparks out

[@gerttherude6366]

been a subscriber for years and have always felt underwhelmed a little (my problem) but this venture into alternative engines gets me exited to try something myself:) ty C&C crew :) loving all the content regardless:)

[@BFTEgodswarrio5939]

Sounds just like a cb750 i swear it does. With open pipes. By far the best one yet.

[@kleenngreencarwash]

Those donuts were epic!

[@franktrue308]

You are among the most gifted engineers on KZbin--and you do doughnuts inside your shop . . . Yay you!

[@aj200415]

My favorite part so far is Ike’s amazing idea of putting the old style swirl pattern in the dash! It is absolutely gorgeous ❤. I love it so much! And the way he did it with the wire brush bit I would have never thought of; genius!

[@Aaron-jx2rv]

One thing that would make it sound even better is a lopy cam

[@upperroomtoo]

The first video I ever watched was "How to buy a cheap minibike" ten years ago. This build really showcases how much you talent has grown over the years!

[@jameswarren423]

This thing is 100% legit. One of your most bad ass builds yet looks and sounds great. Can’t wait to see more.!👍🏼🤩🫡❤️

[@skinnywheelz]

That thing is Nasty!

[@dustinadams7003]

You should try to build a bike style shift system maybe more beefy. Like a 10 speed shift the chain

[@zmjzmj8464]

4-2-1 exhaust measured to diameter and length will make more power over a wider powerband

[@jamesgiesler7134]

Guys! Party balloon helium tank! I've used for fuel tank on projects. But you could mount on front above suspension for air reservoir....just a suggestion.

[@danieljonhson6367]

Please try to put one of those engines in the king midget .

[@patgravel-z1o]

I've had my raycons for about 6 yrs now and saved with kevin from junkyard digs when he first started work with them and they are still going strond

[@stanlucas665]

Luke built a nice tank for under the cowl, but an old school Moon Eyes 2 1/2 gallon fuel tank on the front would give it a nostalgia fuel altered look

[@tamberp]

on the bright side, if there's a load of oil *in* the frame, it won't rust! :D

[@feellnfroggy]

Dude. Perfect exhaust. Nice touch!❤

[@feellnfroggy]

Brass nipples....strategic pause lol.

[@feellnfroggy]

However we can see you have not enough resistance on the valve lash.

[@Natethewonder]

Loved that build guys. It has inspired me to try something similar myself. Thanks. How do I get itll be fine t shirt?

[@dustinadams7003]

You should build a trany of some sort. That would be awesome. And I was just thinking that you should cut leg openings in it for comfort.

[@looneylonzo28]

23:17 I think you should’ve looked for a mini keg for the fuel tank or even two of them ran dual tanks. It would really look the part.

[@patrickveal5435]

This is definitely in my top 5 builds from you guys. Absolutely love the T-Bucket vibe of it. Plus, it's really rowdy.

[@thebam136]

You should put some of that stick on sound deadner in the tub

[@Lesterman_1]

The rig sounds awesome, did you catch the Flames coming out the side? 🤘

[@trevorhogen7761]

This thing is SICK! Just needs a seat for the bucket and I can't wait to see the thing on a full go kart course!

[@Aussie_Aaron]

sounds so good lovin the build

[@SteveIrwinsPetStingray]

Love the build! Been watching you guys for 9 years. If you guys have the time itd be wicked to see a mikuni BN38 carb from a jet ski on this! You could flip the supercharger vertical and give it a little more of that classic rat rod look with that carb sticking out the top 🙌

[@thumasta666]

i was gonna suggest putting on off road tires for the hot lap, good thing i stayed till the end :D

[@jasonnunez2572]

Omg it sounds great, amazing,wonderful,fantastic,delightful, angelic...................

[@somekiwidude]

even if you put one purely for cosmetics the traditional supercharger intake would just fully complete the look of it being a mini t bucket

[@electricboatal]

Ok guys, this is so completely nuts. Perfect for sure. I can only think of a little improvement to do to it. I am actually a bit hesitant to mention this but here goes. I would install a small electric fuel pump and route it to the header collectors. With a little squirt of gasoline it will shoot some pretty nice flames whenever you really want to put on a show. The exhaust has enough heat and the flame front is close enough to make it really interesting. To be safe the jet for the spray nozzle should be fairly small like about a #40 drill bit to start. You of course would need to have a check valve in the tubing to keep the fuel tank from becoming an interesting fire ball. Just an idea from an old madman. I have done this on one of my old sports cars when I was much younger. It definitely makes a statement when cruising. Best Regards Al Hartley

[@itsjustcam247]

I would've thought a rough wood dash would work perfectly with the wheel barrow tub?

[@RollinMyOwn]

Maybe mount the compressor on rubber feet to reduce the noise from it

[@jimsworthow531]

get a title for it!! great

[@JETHO321]

I'd street legal it 😂

[@Lesterman_1]

Aluminum to Brass is a bad idea, CORROSION can and WILL happen. They make aluminum fittings if you can't or, don't want to change out the piping. Hope this saves you some heartache... 😅👍

[@sammyball6664]

My favorite song of all time is paradise city and might as well jump by Eddie Van Halen.

[@johndearen5925]

How could anyone not watch what yall are up to? Yall are great. I want to go ride with yall one day.

[@AE86KP61]

Y'all the kings of rat karts!

[@musicauthority674]

My favorite song is any song by SLADE

[@jeffmcgee5394]

First thing I thought was flip the valve cover upside-down there is already a tapped hole. There are vents in each valve cover.

[@isaacitllbefine7231]

Won't flip upside-down

[@jeffmcgee5394]

@isaacitllbefine7231 oh well, just a thought.

[@charlie236]

Dice valve stem covers could work👍

[@BrutalMorningwood]

BADASS!

[@jackkeller48]

Good job on your victories!!!, and the build is looking good .

[@DEATER155]

Ayyy! Used my idea!!❤

[@bobmanzi7712]

Great stuff guys thanks

[@sethwilson3375]

This is by far my favorite build you guys have done

[@Ozarkprepper643]

Raddest looking super sounding wheelbarrow ever.

[@schmoke420]

James Bond Oil Slick Mod 😗💨

[@pepethefrog7193]

U guys unaware the crankcase pressure is created with the underside of the pistons and not in the head?

[@toyyoda3710]

Johnny D the welding machine ... I have to say, i am impressed with how nice your welds are... I had my doubts but that thing is freakin awesome

[@CrazyTony65]

That stationary engine needs oil baffling where ever you can put it.

[@nathanhogge4870]

I'd love to see you guys put some sticky tires all the way around and take it to the cart track

[@EdStonesy]

This thing is filthy!!!!!!! I love all your builds but you’ve knocked this one out the park boys! So far

[@segue2ant395]

Step aside Ken Block. Ike's got skin in the game.

[@_StarAustin_]

y'all should do the sparkplug in the exhaust trick so that its always spittin flames, those pops when he was wetting the tires were sick

[@tomsalzl6593]

best yet!!

[@joeljones3294]

About the oil. You realize that engine is a stationary engine. It probably doesn’t have internal baffles for the oil issues. Your gonna fill the catch can regularly. Id almost add more oil and drain it to the pan somehow

[@slavko8253]

PLEASE GIVE THIS NASCAR STYLE BOOM TUBES

[@CarsandCameras]

I love boom tubes but I think I like the classic side pipes better for this project!

[@musicauthority674]

NASCAR sucks.

[@slavko8253]

@ woah he replies I love ur vids man

[@slavko8253]

@@musicauthority674 who asked

[@slavko8253]

@@CarsandCameras I almost forgot to remind you guys use a steel mesh filter after the filter because the Screws inside the supercharger release Teflon if they go bad so if ur supercharger goes kaput your engine is still safe

[@TheGuyOutdoors1]

What a great build, I love the fish scale looking dash. Great custom exhaust, air bags. ❤ It, great job fellas 👍👍

[@slavko8253]

Please use a mesh filter after the supercharger

[@brianellison3525]

Definitely one of your sweetest builds yet.

[@dawsonthomas7601]

this is the coolest and best sounding go-kart ive ever seen! I cant wait to see it when its all finished

[@testbenchdude]

@39:55 Ike doing "Gymkana" in the shop gave me the chills. That was AWESOME

[@KevinDietz-x1h]

Dude, the side pipes are sick. sounds so good.

[@scotttimm6146]

This is one of your best builds ever, creative and very unique!

[@zmjzmj8464]

38mm pwk carburetor!

[@Avetho]

Those exhaust headers are _premium!_

[@zadoublek]

I would love to see a sand rail with one of those engines. Love this build!!