4 Incredible DJI Mini 3 Pro Accessories You NEED

4 Incredible DJI Mini 3 Pro Accessories You NEED. Here are some of the must have, affordable and best accessories for the DJI Mini 3 Pro that you will find very useful. Including a DJI Mini 3 Propeller holder! Then learn this Quick HACK To REMOVE PEOPLE From Your Drone Videos - • Quick HACK To REMOVE P...
🎥 ACCESSORIES:
○ DJI Mini 3 Propeller Guard - geni.us/jFh3
○ Skyreat ND Filters - geni.us/vAE5ia5
○ DJI RC Screen Protector - geni.us/lBnWXQ
○ DJI Mini 3 Hard Case - geni.us/02OfDu
○ Freewell Mini 3 Pro Drone Filters - geni.us/zRDH
📌 WATCH NEXT:
○ 15 DJI Mini 3 Tips For Beginners | Become A Pro FAST! - • 15 DJI Mini 3 Tips For...
○ DJI MINI 3 PRO Beginners Guide | Everything You Need To Know - • DJI MINI 3 PRO | Compl...
○ 7 CREATIVE Drone Transitions | DJI Mini 2 Beginner Tips - • 7 CREATIVE Drone Trans...
○ 10 Cinematic DRONE Moves To Fly Like a PRO - • 10 Cinematic DRONE Mov...
🔥 DRONE FOOTAGE COLOR GRADED WITH:
○ LUTs Specifically Designed For Drone Videos - thedronecreati...
🔥 FREE DRONE CREATIVE PACK
○ Get My FREE Drone Creative Pack - thedronecreati...
🎥 GEAR USED IN THIS VIDEO:
○ Drone - geni.us/uDInXl
○ Drone LUTs - thedronecreati...
○ Filming Camera - geni.us/Gb98IA
○ Filming Camera Lens - geni.us/9MdA
○ Filming Camera Filter - geni.us/QdxQ0
○ Wireless Microphone - geni.us/gn9A
○ Tripod - geni.us/QePtth
○ Studio Microphone - geni.us/LFCL0d4
🎵 MUSIC USED:
○ Epidemic Sound - share.epidemic...
🎥 DJI DRONE LINKS:
○ DJI Mini 3 Pro: click.dji.com/...
○ DJI Mini 2: click.dji.com/...
○ DJI Air 2S: click.dji.com/...
○ DJI Mavic 3: click.dji.com/...
🎥 MY VIDEO GEAR:
○ Smartphone Gimbal - geni.us/aSqh
○ Smartphone - geni.us/GNih
○ Main Drone - geni.us/SAeV6GK
○ Pro Compact Drone - geni.us/uDInXl
○ Compact Drone - geni.us/1KO23p
○ Gear Backpack - geni.us/qfUg0W
○ Camera - geni.us/Gb98IA
○ Camera Lens - geni.us/9MdA
○ Tripod - geni.us/QePtth
○ Wireless Microphone - geni.us/gn9A
○ Studio Light - geni.us/fVNb
○ Power Bank - geni.us/HTRGL
○ Long Exposure Drone Filters - geni.us/EQzutT
○ PolarPro Mavic 3 Drone Filters - geni.us/xAu1KBE
○ Freewell Mavic 3 Drone Filters - geni.us/pOEMOl
○ Freewell Mini 2 Drone Filters - geni.us/CtDrin
○ Freewell Mini 3 Pro Drone Filters - geni.us/pwBBO
○ DJI Mini 3 Propeller Guard - geni.us/jFh3
○ DJI RC Screen Protector - geni.us/lBnWXQ
📸 SOCIAL:
○ Instagram - / thedronecreative
○ TikTok - / thedronecreative
○ Website - thedronecreati...
📸 Drone used: DJI Mini 3 Pro. Firmware: DJI Fly Update 1.6.6 available for Mavic 3 and Mini 2 also.
// dji mini 3 propeller guard, dji mini 3 propeller strap, dji mini 3 pro propeller holder, dji mini 3 pro best accessories.
📧 CONTACT:
For business inquires only, please use this email:
[e-mail]
😀 And please subscribe to my channel, I really appreciate it!
DISCLAIMER: Links included in this description might be affiliate links.
If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!

[@TheDroneCreative]

Learn this Quick HACK To REMOVE PEOPLE From Your Drone Videos - kzbin.info/www/bejne/p3WqfYZ5l5x4ms0

[@07sharkboy27]

Hi my name is Danny and i have a question how do you buy this drones as soon as they realese them with such high prices 😅 And can i do it too? I hope its not a dumb question 😅

[@Rush856]

2 velcro cable straps connected together are sufficient for a prop guard/prop holder. You can get a pack of a bunch of velcro straps for the price of one prop guard.

[@DanielBerke]

The first accessory I've gotten so far was a lanyard for the DJI RC. I initially got it so as not to drop the RC off a bridge while concentrating on flying from one, but it turned out to be really handy otherwise. Now if I need two hands for something while holding the RC, I can just let it hang down then pick it up again easily. (The one I got was by SEASKY and was good quality, though I'm sure there are plenty out now that will all work just fine.) I'd love a video on using a CPL filter, if you need a video idea; I haven't tried one, but I've read they're directional (which makes sense, I know a bit about optics), and I've gotten confusing reports about what happens when they're not angled correctly, from "does nothing" (which would be fine) to "makes the sky look weird with asymmetric lighting", which would be a big deal.

[@tariqtvproductions]

Thanks for doing the video useful info :)

[@TheDroneCreative]

Glad it was helpful! Thanks for watching!

[@HenPapirman]

I would suggest you get a silicon case for the remote as well. CPL filter is hardly used by people, you need to have it 90 degrees in relation to the sun, and when the drone is up in the air, you can't really tell how it will look, nor can you rotate it when it's up in the air.

[@DhunterPR]

I have the same propeller holder from skyreat but was to tight so i heate a littlebit and streach a little and work perfect now, just a bit and tested until fit correct

[@adenewton]

Top tip for the gimbal cover - keep the foam piece from the box and place it behind, much much easier to fit the gimbal cover then! ;)

[@TheDroneCreative]

Now that is a top tip! Thanks for sharing!

[@tripehound2]

I don’t understand why people find this difficult. It’s a piece of cake to replace

[@shmulik22]

@@TheDroneCreative yes, but be sure to take it off. otherwise the gimbel is stuck

[@MidnightVixxy]

Just hold the drone on its side facing upwards

[@JohnBasimakopoulos]

I bought the PGYTECH Landing Gear Extensions for DJI Mini 3 Pro... Really helpful, it doesn't affect flight and i do recommend!! Keep up the good work!!!

[@canyonblue737-8]

I have their Propellor Guard, I agree 100% it is outstanding. I was surprised by how well thought out and fitting it was, better than previous holders I've purchased for other DJI drones like the Mavic 2 Pro and the one that came from DJI for the MIni 2 with the Fly More Kit. Totally recommend it for the Mini 3 Pro which has props that catch easily on the bag without this,

[@Singkhorn.S]

I find the propeller guard is way too tight. afraid it's going to bend the props

[@amg2fast626]

@@Singkhorn.SMe too.. Reason why am here. Did they ever bend ??

[@deanadamedge]

I use an orange, hard foldable landing pad (so it won’t blow away or need ground spikes for prop snags) It’s hood forces still locating me and my home point when manually landing. A high quality add card is essential. Emphasis on ‘high quality’ (Sandisk)

[@droneadventureswithdaniel]

Filters are a Must have, will definitely pick up those myself, thanks for good accessories ideas! Keep up the good work.

[@TheDroneCreative]

I agree! Thanks for the kind feedback, and for watching!

[@trufortune6771]

I just love the neon rocket ship in the background

[@TheDroneCreative]

haha, thanks!

[@shaanthacikyan3958]

Thank you kindly. I’ve been apprehensive in purchasing most of these items due in part to not wanting to guess to see which products will actually fit the 3. I took the opportunity to pull the trigger and purchase 4 of the items you listed. Such a big help.

[@TheDroneCreative]

Glad it was helpful! Appreciate you taking the time to comment, thank you!

[@shaanthacikyan3958]

I’m still holding off on the ND filters until I get more affiliation with the stock setup, a bit intimidated by them for some reason. Your videos are excellent.

[@dronehobby2399]

The strap for the RC controller is really good to have as well

[@ChunterGB]

I have the case and have noticed it has slots for a shoulder strap, anyone have any idea what type of connection its called or what straps fit into it?

[@fofesimo]

The accent is very exotic! I had never heard filters being “fellors” 😂 It takes me time to get use to it. Just be yourself. It is not a critic. Just takes time to adapt my ears.

[@TheDroneCreative]

haha, thank you. I appreciate it's a harder accent than most to get used too!

[@ralfputz6076]

Hi Matthew, what are your thoughts about adding landing gear on the Mini 3 so it is higher off the ground when it lands? And what landing gear is suitable?

[@roadtripmitch]

I had nothing but trouble with the ND filters on the mini2. Always a gimbal error regardless what I tried, I just stopped using them. I have the same "Glass" screen protecter on the mini3 Pro RC and find the touch screen is less responsive. I really need to push and hold, at least more then my 12P Max phone (mini2) with a similar protector. I have also found that the mini3 Pro needs a pretty smooth area to take-off, due to the rear props. I have never used "landing pads" on any DJI Mavic or mini2 and now I'm bringing a focus card to take-off and land, not a big deal. Really enjoy your videos! You are very mindful of length of your videos with a lot of excellent information! Very happy I have found your channel. Safe and wonderful journeys!

[@idavidmcclune]

Hi Mattheww, thanks for all your very useful videos. As a newbie, I'm finding them extremely useful. I've just bought the ND filters and the prop guard as they seem the most useful to me at the moment. Yes, even the ND filters as I'm looking to use the manual settings once I've got the hang of all the controls and done a few cinematic shots to get my eye in. Looking forward to all the fun of drone videography although TOAL restrictions are currently doing my head in!

[@corepurab1064]

i really wanna have one drone and im so dedicated im literally finding ways to earn and get this or any of the best drone in the market rn!! i watch all your videos and many other creator's videos to learn each and every thing i can before taking my first flight as a drone pilot! MUCH LOVE AND SUPPORT TO ALL THE CREATORS OUT THERE!!!!❤❤

[@Instant_Nerf]

Man I started with the mini se. At $299 it’s a steal! I would look at it .. seriously for a beginner.

[@corepurab1064]

@@Instant_Nerf i want to get my first drone from my own money that is the reason i cannot take it rn

[@davyaerialvideography9595]

Skyreat need to adjust the prop guard, it’s way too tight. You can’t close it properly without really pulling tight on it which then bends the props. I had to put mine in boiling water and stretch it out quite a few times. Now it fits ok, but you shouldn’t have to do this for it to work. I’m not the only person to suffer this, read it on Amazon reviews and also from several people in Mini 3 groups.

[@TheDroneCreative]

Really, this is good to know. I haven't really noticed this issue myself but will pay more attention next time it put it on now. After you stretched it has it returned to it's normal length or is it still ok?

[@topscooby]

Another excellent video Matt 👌 Will definitely get a screen protector and prop guard…always used it with my Mini 2 and would like it on my Mini 3 too. One thing I must buy is a set of replacement sticks for the controller. Dropping one (or both) of these in loose dirt and/or long grass could prove impossible to find. Thanks for the video, I have watched all your videos and they are a must watch for me now. Cheers, Andy 👍🇬🇧🛸

[@TheDroneCreative]

Thank you. You are absolutely right, the sticks are very easy to lose in long grass!

[@James_Baggott]

I got all of those plus the RC rubber glove, propeller guard, and i'm surprised you left out SD card ;)

[@Thoughtfulbuildsllc]

Killer video I’ve already watched 4 in a row

[@kj7ym]

I bought the case but will return it since the foam is just cut too tight. Until I found a wide ribbon to put under it to pull it out with, I could not get the controller out without screwing in the gimbals, and pulling really hard on them to get it out. Also when the RC Controller is in the foam, it presses the Right and left top button down the whole time. Well really, that can't be good for it! I must say the Drone cut out is perfectly sized. it's just a shame that this case is damaging my RC Controller.

[@breezys7862]

Do you think that the prop holder is a bit too tight and squishes the propellers? Or will squish over time? Mine seems tight!!

[@dashobie]

You are my top source for anything drone Thank You.

[@ErikDeGroef]

Do you have a suggestion for a powerbank to charge the charging hub on location?

[@copycatlyn]

twested... lol. anyway, thanks for the video!

[@Voltis-5]

Yup!! Got all those last week lol now I'm just waiting for the RC skin cover which should be here by next week. Loving your content and this drone!! 😎 Keep it up!!

[@TheDroneCreative]

Thank you! Appreciate that.

[@kamikazekaos]

Prop guard is a over kill, you can simply use velcro straps

[@fj1100mark]

I fitted a screen protector as soon as I got it but I also bought an anti-glare film protector as well to put over the top of that which helps in strong light

[@mw3horn3t600]

Great video. The strap on the prop guard looks to be a bit short, can you confirm.

[@TheDroneCreative]

Seems to be just right. If it was looser the props would move around I think.

[@trevormccullough312]

Hello from the Ards Peninsula Matthew. I’ve ordered the PGYTECH cover for the RC controller. Same as I have for my “Smart controller”for the Zoom. Anker charger, lanyard & brackets, spare sticks as well.

[@TheDroneCreative]

Small word! Spare sticks are a good buy, they are quite easy to lose!

[@dashobie]

Thank you for taking the time to do the best videos.

[@roxanebay]

Does the prop guard from Skyreat when on the drone fit nicely in the Skyreat hard case?

[@ralfputz6076]

How do the Skyreat ND filters compare with the Freewell ND filters?

[@QuantumGeotecnologia]

very usefull tnks my friend

[@travellingman9031]

Looking forward to some sort of review on the ND filters as I have read that they create problems with sharpness when autofocus is set.

[@TheDroneCreative]

Interesting, will make sure to test that!

[@terryneilbooth]

Great tips. I already got the prop guard and screen protector. Looking forward to the filter comparison you mentioned 👍

[@TheDroneCreative]

Thank you! Appreciate you watching.

[@RiposteThis]

Is the proper guard kinda tight on the top propellers? I'm worried about mine changing the bend on the propellers.

[@TheDroneCreative]

Mine wasn't, but I have had comments from others saying theirs was. You can stretch it a little to loosen it, if it is. Hope that helps!

[@Robbe1984]

I totally saw the twist motion 😂

[@jairrodriguez4430]

Hi, Can i use the Apple 20W USB-C charger with my DJI batteries ?

[@faridjoel9564]

Hi, I just got the batt plus pack kit and wondering what is the maximum voltage when it is 100% charged, because mine have different voltage, for example batt plus A voltage for cell 1 and cell 2 are the same on 4.20V on the other hand the other batt plus for cell 1 is 4,20V and for cell 2 is 4,19V...is these normal? thanks in advance

[@SPOLDCARS]

What brand of filters would you recommend?

[@chris-ip4pk]

Hi your the man to ask,brand new mini 3 Pro has slight up down play in rear left arm when folded in,not flown it yet,from hinge area ,is this normal,regards

[@TheDarienJim]

I got the screen protected but I have two small bubbles in each lower corners. Any suggestions to fix?

[@gerrykp]

I sent mine back to amazon. And reviewing the comments, there were others that said the same thing, the propeller holder is too tight. it bends my propellers. it is a nice snug fit and fits in my new hard case but i am afraid that keeping this wrapped around your propellers could permanently bend them. What do you think? comments? (yes I have the propellers in their correct storage position)

[@breezys7862]

I am wondering the same thing!!! seems too tight, not so much on the bottom but the top for sure.

[@perfectlylonely]

Thanks for the camera guard protector install tip

[@sasaaleksic1991]

I'm beginner, and trying to find a way to record audio on the dji mini 3 pro. Could you please upload a video about it...

[@Maze707]

i don't have the mini 3 but i still love to watch the video, keep the good work up!

[@ToddRileyRealEstate]

I just got the screen protector and the propeller holder as well. And the screen protector the first time did not work so I used the second one and it is perfect - would not know there is one on the screen.

[@TheDroneCreative]

Yeah, the screen protector is great. Barely notice it and well worth it for the protection against scratches. Thanks for watching.

[@SLOPPY1001]

Great tips. Time to upgrade from my mini 2 I think. Just got back from Rhodes and to my shock I've discovered the vinaigrette you mentioned from the Freewell which has spoiled my videos I did in the old down, didn't notice while in flight as it was bright, good to know there's less chance of the and the 3 pro. Thanks 😁👍

[@cragly8759]

I purchased the screen protector via your link. However I’m a bit disappointed with them as one was chipped in the corner and neither of them will fit nicely over the screen without bubbles. I’ve spent the last hour trying every which way to apply these but it always seems to be the top right hand corner on both protectors can not shift the bubble. So when using the controller it blurs that section of the screen. Would be interested to know if anybody else has had this issue or is it just that I’ve had a bad batch.

[@jetrex1986]

Tried to fly at the Big Fish and screen says need to unlock --what does this mean and is it ok to fly in Belfast.Sorry posted this on a older post.

[@jimthorleydronefootage]

Good video mat I have purchased the propeller gaurd and the screen protector from skyreat just waiting on the drone now.

[@Froggycuber]

Have you sourced a fly more plus kit from inside UK/Eu ? I've seen some listed from sites like Ali express but not sure if their authenticity.

[@alitrading_]

Use an elastic band for the propellers when you bold em

[@jamesss1953]

I noticed the prop guard you had on previous video so now have one on order ~ screen protector ~ just ordered one as I watched this < makes sense>

[@RJ_DRONES]

Hello Matthew how do you clean your nd filter I have finger print on black and front

[@TheDroneCreative]

Hey, I just use a microfiber and wipe it gently.

[@RJ_DRONES]

@@TheDroneCreative you got link to the microfiber and are any wipe good

[@WiljanWiljan]

Fantastic! do you know of a bikeholder for the RC? and a sun blocker / screen for the RC to further increase visibility?

[@skyaerialview]

I recommend you get a lanyard for the RC.

[@djduane1]

Hi, Mattheww! Thanks for the great tips on the Skyreat accessories! I ordered my ND filters the other day so hope they'll be here soon. I'll also order the screen protector and the case as I trust your judgment! Cheers!

[@TheDroneCreative]

Screen protector is a good buy I think. Would rather scratch a cheap protector than the actual controller screen!

[@WanderFeetChronicles]

You have to remember judgment in this case is slightly biased because the items were sent to Matt freely, as a first look (which is code for incentivised review), and although Matt may remain unbiased, you will never actually know for sure. - Matt, this isn’t an attack, I just like to be transparent and make people aware. This person is basing a purchase decision on your video, which is what Skyreat want, but it’s not quite genuine is it. Regardless if you say it’s your personal opinion, the fact they were free will always put doubt in most peoples heads about how good they are actually are. - We all love stuff for free, and stuff we’ll use even more so but that doesn’t mean they’re always 100% quality items. - Skyreat should prove me wrong and send me items to review, but wait, I don’t have a channel, so they won’t. You see…. Incentivised.

[@TheDroneCreative]

Nothing wrong with this comment ScouseTrooper. You are absolutely right, I was sent these items for free. I do however genuinely believe the screen protector is a great buy. Doesn't have to be a Skyreat one, I just used the Skyreat one and it was great. Some people would prefer a matt finish and if that's the case buy one with that finish.

[@alukarxn]

Love the case and the look,just one thing that i dont like,the case can only lie down horizontal.the screen protector really works im was surprised.

[@Ireton]

Got the prop holder the stud hole becomes worn in a short time and fit has to be precise, has no longevity

[@TheDroneCreative]

Really? This is useful to know. I have been using mine a fair bit but hasn't worn yet. Will keep an eye on it now!

[@ReplayLifeOnce]

Sunshade hood for controller

[@gerrykp]

looking forward to the ND filter review too!

[@weaselinjeans1]

Sorry for an off topic question. My Mini 3 Pro arrives today along with the Fly more Combo pack etc. I purchased from Amazon but where should i buy DJI Care Refresh package from? I want to buy the 1 year plan but not sure of the process. Thank you.

[@AJCoReTV]

Love your set/shot

[@RolfResler]

Thanks for sharing that. Maybe you could add a comment of how to remove the filter covers. It's hard to see because hour Hand is covering the gimbal. Get them off by turning the filter counter-clockwise? Turn them on clockwise? or the other way around?

[@markrodgers9527]

Digging that accent!

[@TheDroneCreative]

Thanks! Northern Irish!

[@markrodgers9527]

@@TheDroneCreative oh? Where?

[@paulhoward979]

Matthew, is it worth buying prop guards when flying to avoid damaging props?

[@TheDroneCreative]

For the Mini 3 Pro, not really unless you plan on flying indoors a lot!

[@paulhoward979]

Thank you 👍

[@GlenOrsak]

Would you recommend using the prop protectors during flight (the cage style)? If so, what brand/model do you recommend?

[@TheDroneCreative]

Personally I wouldn't. If you are flying out in the open you should be absolutely fine without one.

[@care3777]

Thank you Mattheww! I have a Mini 3 on the way! Your videos are fantastic and very informative! What video editing software do you use?

[@TheDroneCreative]

Thank you! I use Premiere Pro.

[@satwinderkang50]

Thanks for another informative video, Matthew. I wonder of you can help I am getting the odd frame which flips the image upside-down. I end up cutting the frame out and stitching the back together (I use Adobe After Effects). Could this be a card issue, I am using a Lexar 633x 64GB Micro SD XC [3] 1.Which card do you recommend for my DJI Mini 3 Pro? My first drone btw, only got it two days ago and loving it. Keep the videos coming as I have learnt so much already. Thanks Sat.

[@andleyjamieson7627]

Great video What is the purpose of the two screw holes on the lower edge?

[@thisdroneupflying]

Great video Mattheww!

[@bubbanewton617]

where is the free DRONE CREATIVE PACK? the link says 8 bpd cost

[@gerrykp]

thanks for the video! very useful and I love those accessories. Does the Mini 3 WITH the propeller holder attached fit into the hard case? I see that the case has the foam notched out to fit perfectly. The lid closes and everything fits well? thanks again! (update to my comment and question) Yes the case notch out in the foam will accommodate the Mini 3 with the propeller holder. however the case doesn’t have really enough room for external wall chargers or cables. you have to move things around and possibly cut out a new hole.

[@markjackson6325]

I have the Freewell All-Day Day ND filters - only minor annoyance is that the original DJI lens cover is too thick to fit in the case. I believe that's also the case with DJI's own filters. Bit of an oversight imo.

[@TheDroneCreative]

I agree, knowing me if the DJI lens cover doesn't go in the case and I put it somewhere else I will end up losing it. Thanks for commenting this, super useful to know!

[@FreewellGear]

Hey Mark, We did consider this; however, by giving space to that empty frame, we will risk all other filters being damaged by leaving gaps in between. Since I got my Mini 3, I have never placed an empty frame anymore; it should be replaced with UV for a better protection. Even DJI own filter set doesn't allow to store that blank frame so they are giving message with that. Thanks

[@markjackson6325]

@@FreewellGear Thanks for the response, the UV filter idea is a good one, I will try that - maybe when yours is available on Amazon UK (object to paying almost as much shipping as the single filter costs from your store).

[@FreewellGear]

@@markjackson6325 they are on the way to UK as we shipped last week.

[@ianmcat]

Not a problem for the skyreat filters. Everything fits in the case nicely.

[@MyViewsOfTheWorld]

Nice video. I look forward to get a Mini 3 Pro by the end of the year. I hope you get a % if I use your links!!! You deserve it. And see? Skyreat as well as other companies are seeking you out. That is a sign of success. Congratulations.

[@TheDroneCreative]

Thank you, appreciate your ongoing support. Hopefully you get that Mini 3 Pro soon!

[@jimboctration3354]

ive just bought the skyreat filters. it seems the plastic ones now come with an adjustable cpl filter. ive never used these before but your videos explain things well. the pack i have bought go from 8 to nd128 which im assuming will be fine for a beginner like myself. would you say the uv filter (even as just a lens protector) is worth getting?

[@penultimatename6677]

Hope you also include a lanyard and sticks for the controller. One item which is not an accessory but can be important. Do you have a log book to recommend? I know how I wish it was organized. Always disappointed with the choices I have found.

[@PrashantVideography]

i wish there was a controller stick guard so we do not have to unscrew them

[@acetreyner2906]

Are ND filters beneficial for real estate photography or are they used more for video?

[@natessliceoflife]

Video. For photos you can crank that shutter speed up.

[@OatCmor]

I heard that DJI's ND filter storage case is too thick to put the original len in. How's about the Skyreat's case? Can you put the original one in? Thanks.

[@MyViewsOfTheWorld]

Now, the mini 2 came with the prop guard, didn't it? At least mine did, so I'm not sure. I like it actually to put in the my backpack or even jacket pocket when I am not putting it away in the camera backpack.

[@chrisbee9164]

Hi where did you get that amazing rocket lamp and what make and model is it mate, I'd love to get one. Fantastic video too.

[@tchendjeneves5886]

Thanks for sharing bro...

[@TheDroneCreative]

Thanks for watching!

[@Curtis-Randall]

Now if I could just get a chance to buy the drone over here in the US to use with these accessories 🤣🤣

[@TheDroneCreative]

Seems to be sold out everywhere. I can't remember a drone being in this much demand before. Hopefully you get a chance soon!

[@Curtis-Randall]

@@TheDroneCreative thank you! I’m not in a huge rush to be honest. I’m glad DJI seemed to have a really strong launch. I think this drone is going to do very well just like the mini 2

[@WanderFeetChronicles]

@@TheDroneCreative I don’t think it’s demand - it’s like with all other electronics. Shortage of materials. So short supply.

[@DaveKingMusic]

What about a lanyard?

[@TheDeadlyraptor]

Also you can get silicone covers for the controller for around £7 that stops scratches on your controller when in bag

[@VoieYage]

Hello, Impossible to find Mini 3 Pro joysticks Compatible with DJI RC Remote Controller ? Do you know where I can buy it? Thank you for your excellent videos

[@SkyWalker-wj9bq]

Looks nice, but did you buy the propeller holder? Or a gift for review?

[@TheDroneCreative]

Gift for review. Bought the screen protectors myself.

[@breezys7862]

@@TheDroneCreative Have you used the RC with the screen protectors in full sun yet? How is the glare?

[@robcossin4690]

I would really like a matte finish screen protector. Anyone know if that is available?

[@fendrou]

The most useless is the screen protector! It is prone to glare and with time it becomes foggy and scratchy. Leave the screen clear and enjoy the clarity!!

[@TaliosLintry]

3:55 Waiting for this. Tag me when it's released :)

[@juanh1093]

You forgot to talk about the differences of Freewell and Skyreat filters

[@tchendjeneves6390]

Nice video bro...

[@TheDroneCreative]

Thank you!

[@itamar_bl]

Nice video 👍