4 Speed Swap C3 Vette

  Рет қаралды 4,442

Time with the Durbins

Time with the Durbins

Күн бұрын

I replaced the stock Turbo 400 automatic transmission with a Muncie 4 speed. Unfortunitely I was not able to video tape a lot of the conversion process so this video was made to help explain the process and the issues I encountered during the process.

Пікірлер: 16
@rowdy3837
@rowdy3837 2 жыл бұрын
This is one of those swaps most would love to do but are incredibly daunted by, myself included. Trying to find detailed information about it is like finding a needle in a haystack. Thanks for doing this!
@timewiththedurbins
@timewiththedurbins 2 жыл бұрын
Glad to help. Thank you for watching. Good luck with your project.
@markwest9447
@markwest9447 2 жыл бұрын
Very nice attention to detail, quality work. I am surprised that nobody came up with a hydraulic slave cylinder kit to replace the entire Z-BAR mechanism. Keep up the amazing quality 👌. Working on a c3 vette can age someone in dog years 😀...
@timewiththedurbins
@timewiththedurbins 2 жыл бұрын
Thanks. I don't know if there is a hydraulic clutch upgrade for a C3 but it would be nice if they did. Working on a C3 can definitely age you. I'm only 28 years old. LOL
@markmontgomery9954
@markmontgomery9954 2 жыл бұрын
Didn't understand most of that, LOL, but good seeing you again. If we lived closer together I'd let you be my personal mechanic, you really know your stuff!!!!
@timewiththedurbins
@timewiththedurbins 2 жыл бұрын
There is property for sale close to us. You could move down here and I could work on your vehicles. I'm very expensive but I'm worth it. LOL Would love to see you. Take care.
@davidsmith3828
@davidsmith3828 2 жыл бұрын
Information on the pedal changes would be nice…I’m contemplating a conversion on my ‘75, I have Muncie and bell housing but I’m unsure about sourcing the pedals…thanks for posting…any info would be appreciated…
@timewiththedurbins
@timewiththedurbins 2 жыл бұрын
I apologize for the lack of information. I really wish I would have video taped more of the process. Your vehicle should have the mount in the vehicle already that will accept the clutch pedal. I have heard that you can install the clutch pedal without removing the pedal mount from the car. I personally don't see how that is possible. I purchased everything I needed to convert my car from automatic to 4 speed from: Corvette Generation, 16541 US 301, Dade City, Fl. 33523. Phone: 352-523-0900. Website: corvettegeration.com The owner, Wally Dye is very knowledgeable and helpful. He has over 350 C3 and C4 Corvettes on site. Thanks for watching and have a great day.
@josephstoltz8027
@josephstoltz8027 2 жыл бұрын
I feel your pain. Just converted my ‘71 to a Tremec 5 speed from a TH400. I paid a little extra for a hydraulic clutch. Glad I did it though.
@timewiththedurbins
@timewiththedurbins 2 жыл бұрын
I wish I would have went with a 5 or 6 speed trans so I could have a hydraulic clutch. I bet your 71 is fun to drive with that 5 speed. Have fun and enjoy the ride.
@markwest9447
@markwest9447 2 жыл бұрын
Try doing this, but with a 5 speed Doug Nash... You will wish you never got started...
@timewiththedurbins
@timewiththedurbins 2 жыл бұрын
No thanks, I had a hard enough time doing it with a Muncie. LOL
@richardnicholls8684
@richardnicholls8684 Жыл бұрын
What about the peddle on the left, the guy who owned my 73 before me swapped out the auto to a 4 speed but left that peddle in place can I just remove it?
@timewiththedurbins
@timewiththedurbins Жыл бұрын
Yes, you can remove the pedal. I'm not sure if you can do that without taking the whole pedal assembly out or not. I think you can but I'm not sure. If you can remove it without taking the entire assembly out, I think I would try to get under the dash with a Sawzall or a disk grind and just cut the clutch pedal shaft off up as high as you can. Just be careful to not cut through anything important or start a fire with the disk grinder.
@chrissmith7669
@chrissmith7669 2 жыл бұрын
I’m looking for a 4 speed conversion but am annoyed Most aren’t any cheaper than a TKX 5 speed. This is definitely on my plans.
@timewiththedurbins
@timewiththedurbins 2 жыл бұрын
It's a lot of work but definitely worth it.
I Purchased a 1996 C4 Collector Edition Corvette
11:11
Time with the Durbins
Рет қаралды 1,1 М.
Muncie M20 4 speed tear down
3:22
Tartaglia's Rod Shop
Рет қаралды 3,7 М.
Thank you mommy 😊💝 #shorts
0:24
5-Minute Crafts HOUSE
Рет қаралды 33 МЛН
Review of the Chinese Rpm Air Gap sbc intake manifold. Aka the "EdelWok"
2:15
R&R power steering pump on a 1974 Chevy Monte Carlo
13:08
Driving My Old Car Forever
Рет қаралды 572
C4 Headlight motor Drive Rebuild
44:37
Time with the Durbins
Рет қаралды 104
1979 Corvette Head Lights Not Working
1:49
MrPapakuka
Рет қаралды 1 М.
COMPROU UM FUSCA E UMA VARIANTE EM PLENAS FÉRIAS
4:50
Outsider Garage
Рет қаралды 66
1996 Chevy 5.7l vortec clutch fan removal method 2
0:54
Travis Schneider
Рет қаралды 111 М.
Cars and Coffee Wildwood Fl
2:50
Time with the Durbins
Рет қаралды 94
New Harbor Freight Roller Cabinet
11:28
Time with the Durbins
Рет қаралды 907
Jim's C3 Corvette
0:58
Time with the Durbins
Рет қаралды 975
2008 Vulcan 1600D Vulcan fuel pump noise
3:04
Jack Devine
Рет қаралды 2,2 М.