4-Stroke 49cc Friction Drive Motor Bicycle Engine Kit Installation | The Flying Horse Lock-n-Load

We show you how to install our Flying Horse 49cc 4-Stroke Lock-n-Load Friction Drive Bicycle Engine Kit. You can get yours here ► www.bikeberry.com/flying-horse...
BikeBerry.com ►bit.ly/1FZ8nPp
Facebook ► on. 1wWG4fD
Instagram ► bit.ly/1aM3WxZ
Twitter ► / bikeberrycom
Everything you need to make your own Motorized Bicycle.

[@cybervigilante]

Is there a PDF for this? I'd like something to look at while I'm installing, and I can't carry a video out, and if I had a tablet,stopping and starting it would be a pain. Also, I have a 27.5 inch Schwinn Swindler. Will it fit on that size wheel?

[@xXJAKMACKXx]

This is going to help me get to work thanks

[@mattschweigert2631]

Hey G y hey hey hey get guy u guy hey hi hi I hey high

[@a1930ford]

What are the size of those spacers used to mount the engine onto the mounting plate?

[@alf6384]

What type of bicycle are you installing it on? Can you install it on a full suspension hybrid where that is not much of a connection 2 Bolt down to in the back. I would think you would prefer a mountain bike over a cruiser for a rear mount due to the fact that on a cruiser man and motor sit directly over the Wheel and Tire where on a mountain bike or full suspension a man pretends to be meaning part of his load towards the front

[@rustbeltgypsy3713]

I don't see the friction drive gear thing (in video kit) that presses up against the tire ...is that sold separately?

[@terryjoe323la]

Hey what is the top speed can you get on this friction drive engine is there a upgrade to in Governor removals that can make it go faster

[@rivermarschke8882]

Nice setup

[@TheAndrewben10]

on a ten speed bicycle, do you have to eliminate the rear brake$

[@imanantariksa]

I put it on my bmx.. Work like a champ..

[@mickgatz214]

Can you buy this as a complete kit or what? :) (hate to think of what the shipping costs would be from the U.S of A though......)

[@jakeclifton1818]

what upgrades are available for this kit

[@jtothefx]

Greet work!

[@Daniel_Plainview]

Hey guys can you recommend any other break in oils ?

[@dramatv4763]

I like the 49 cc motor but I want the gas tank that comes on the motor itself is that possible really don't care for the tank

[@pianodoesminecraft]

Could I install this on a bmx bike?

[@AndrewTheRadarMan]

I have bought and installed this engine on my bike! Its awesome, I uploaded my review on my channel

[@bikeberry]

+Andrew Agustin Just watched the review and it was awesome! Glad you enjoy the engine kit. I recommend filing the teeth on the Friction Drive Roller to make them smoother so you can increase your tire's life.

[@a1930ford]

I looked at your site, but never saw any reviews of this kit. Looked in videos and in channel and could not find what you said about it. Did you remove the review?

[@BEEBEE159]

@@a1930ford Here's the link below: kzbin.info/www/bejne/jaeQm5qojqyUpNk

[@techten1012]

Whats the weights difference between 49cc kit and 38cc kit?

[@mandarkoyande8423]

hey buddy I'm from India so can I buy the 2 stroke 80cc engine kit from ur website .

[@residentevil9894]

Can you put this on a 29inch?

[@alfa7108]

Do you have that kit for a tricycle ?

[@YankeesGC1117]

Would it work on a mountain bike

[@darrend267]

Does anyone know how to tune these engines to have a good idle, mine has a hard time staying running and ive adjusted the idle control screw with no success, any help would be apreciated. Thanks!

[@twistedassassin2217]

put the idle screw back to how it was when you first got it, try that, then if that doesnt work, untighten it by a HAIR! dont move it for an entire spin, not even a half, just a very very small bit

[@satajet100]

hi where i can buy this kit. thank you

[@TM-we6eg]

Would this fit a bike with 29 in wheels

[@Dezmon2jz]

Get some in stock please? I want to buy

[@joelgillespie8222]

how fast does it go?

[@tysharpe4486]

Will it go on a 29 Inch one

[@williamhaskellhaskell3162]

A luggage rack on the right rear. Could help with the weight instability !

[@chipcool6654]

Would this kit work on mountain bike tires and a 7 speed rear?

[@nicoledion36]

Yes it would

[@cybervigilante]

What's this siphon hose? I have to buy it separate? I don't see instructions for this either. You really do need a PDF. It would save answering a lot of questions.

[@wildman6247]

Jim Mooney thats to suck out of motor for oil changes not necessary for this set up drain plug is easy to access not included makes oil changes easier for the kits where motor is mounted in the frame dont get frame mounted 4 stroke the gearboxes fail often do good to get 3-400 out of them then your spending $80-$90 on new gearbox friction drive is better less parts means lower maintenance

[@deshauntrotz6648]

Hey I have on but the part the spin the wheel is cease up, how could I fix the that

[@SMOKEY-JAYS-DIESEL]

Will this work for 20" × 4" Fat Bike Tires??

[@d0cx]

Is there any way I can install the throttle on a bike with a gear shifter?

[@wildman6247]

Hidaz // Gaming if you can find room for a extra brake style lever order a clutch lever fir one of the two stroke kits or ive heard of people useing a thumb throttle from a atv should be able to find one online pretty cheap

[@lakesheppard5466]

Do I need a fuel filter?

[@paranoideavesdropper2523]

How do brake on a single speed?

[@williamccjr]

Any idea when these kits will be back in stock?

[@bikeberry]

An order for a new shipment has already been placed. We are currently waiting on shipping from the manufacture. Check in with our customer service representatives within a few weeks.

[@jakobflyman7408]

What's the top speed of this one?

[@measterwo]

Can you mount one of these on a fixie bike?

[@bandostyle]

+Matt Easterwood yes, they also include a coupon for knee surgery.

[@benjamingordon2627]

What's the price and is it legal in all states?

[@lleytondunne3806]

How many litres is the fuel tank capable of holding? And what sort of mileage can you expect from it?

[@wildman6247]

Lleyton Dunne a little over a half gallon about 80 miles ridden at around 20,mph

[@wildman6247]

if you get one of these upgrade the throttle the ones that come with the kits are junk also no good in the rain roller spins when wet otherwise nice kit much less maintance then the 2 strokes and way easier to install add a fuel filter gas tanks tend to be rusty on inside worth the couple bucks to save your carb from getting plugged ive got. 300 trouble free miles on mine so far

[@loganelorreaga9464]

you can spray wd40 into the throttle cable and it should help

[@olivierbeucken6671]

Why a metal friction wheel? I have build a bike myself and used a rubber one

[@jonneilsmyth9107]

is this the smallest 4 stroke in size ? i cant get one or is there any smaller more tidy kits about

[@WillB-lv1xg]

jonneil smyth Honda gx35 or gx25 is smaller.

[@zackspack8976]

Suburu Robin engine

[@joshszalanczy455]

will it fit on a 700c road bike 27 in?

[@ahmaddarwish1486]

Yes these motors will fit, but with a wheel that thin I dont recommend the friction drive.

[@skodziarz7503]

would'nt this destroy the tire ?

[@Th3Test5656]

My bikes back tire won't stop spinning when I start the engine how do I stop it?

[@driger888]

isn't there a plastic gas tank that fits right on the engine?

[@onchelawson6372]

When will these kits be back in stock

[@bikeberry]

We are currently awaiting a shipment of new stock. Check with our customer service representatives with in a week.

[@philipaldrick5363]

I have a gomier trike, can it be fitted to it?

[@philipaldrick5363]

I'm sorry, I'm looking for a 4 stroke that can be fitted to a Gomier tricycle.

[@gamerboy7464]

what about rain?

[@joedelart]

Just got mine put together it starts The roller won’t stop And when I go to put the roller on the wheel it jerks forward and the engine shuts off

[@yggameplays7448]

how much the friction drive cost without engine.. i have a honda gx 35 ..

[@codemmg4454]

Can you do that with 212cc

[@js_1995x]

No dumbass

[@gavinmcvey8177]

Use locktight on your bolts be safe 😎🇬🇧🇺🇸

[@a1930ford]

On my long support bars, they are not cut at any angle at all. I have looked at all sides of them and front and back and there simply is no diagonal cut to the openings on either of them. Also, my kit does not have the same exact assembly to the quick release lock on the back. The spacers are not round as in the video, but are rectangles with enlarged edges to each of them. The video is actually very dark as this assembly process is being shown for that release lock and the bolts assembled with it. You guys really need to address questions as well as make a newer, updated video of this assembly.

[@peterpemrich6962]

PLEASE ANYONE does this work on a BMX plus does this eat away your tire

[@owenhergel7933]

"Place the mount in place where you want it to be placed in the right place."

[@Josh-ox5cs]

How much does it cost?

[@reptileguy2396]

Doesnt this wear out your rear tires extremely quickly?

[@Robertas_Grigas]

+ReptileGuy239 ist not that bad

[@dbatch5677]

You can buy Kevlar Tires that wear much longer now. Not too $$$$ either.

[@communistk9888]

why not just have a rubber sleeve for the .."crank rod"? that thing rubbing on the tire

[@jonny6758]

What's the best this works on 26.cruiser could you.do a mountain bike pr possibly a 29 inch cruiser

[@bikeberry]

call us at [phone] for the best assistance

[@tommypyxell]

whats the MPG like on it?

[@tylerwoodham8027]

100-150mpg

[@joeycottontailakajoeschmo3366]

“LOCK AND LOAD AND GET READY TO SNAP CLUTCH BELLS AT $16 A POP” Put a 100 miles approximately and already snapped 2. Time to re-engineer the original to actually last. Damn fun cruising at 25 and topping out at 30. That engine on the side makes it unstable over bumpy stuff and breaking distance is increased with weight. Only getting about 25 miles before I refill tank even though it’s not nearly empty it won’t run partially full.

[@williamhaskellhaskell3162]

Have they improved their end bells. Or can you buy a quality replacement part?

[@hiphopcovers]

only thing is when I get the whole in the handle bar the stupid ass killswitch has a plastic price and gets smashed in so I drilled a hole thru the top and put a bolt in it

[@loganelorreaga9464]

doesn't this destroy the back tire

[@JakelaWeeze]

Are these engines quieter than the 2 stroke kits

[@wildman6247]

JakelaWeeze not by much but less maintnance

[@Tom-qe8wc]

JakelaWeeze way more quite

[@YankeesGC1117]

Top speed????

[@RACVIDEOS]

Does anyone know the amount of oil to use ???

[@wildman6247]

dont go by the dipstick fill until oil is up to the threds that the dipstick screws into that's what the instructions that come with the engine say to do if you go by the dipstick you wont have enough oil in your engine

[@Daniel_Plainview]

@@wildman6247 Hey guys, im looking to buy some break in oil, but im looking for alternatives at autozone or oriyles, can yall recommend anything other than maxima ?

[@Patriot3]

I want one of these kits but your such hacks in the install videos i keep watching and i'm wondering how the kit will be half ass'd .

[@joeycottontailakajoeschmo3366]

It is not even half an A. Maybe a quarter.

[@mymadfamily1]

Your web site keeps crashing

[@ronit_gamingstar]

engine kit kimat

[@matthewg.2298]

Will this kit fit a 3" tire?

[@3dprintingpunk31]

Matthew Gautchier no i dont think 3 inch tires are gonna work on this. Again i could be wrong but the ideal size is 2.25 to 2.5 inchs

[@chasehunt7805]

How much is it and dose come with th mother and gas tank

[@suubierex9396]

Chase Hunt | hello chase, sorry to disappoint you, but our product does not ship with mothers. We recommend using a dating app in order to fulfil your needs.

[@wildman6247]

Chase Hunt around $300

[@MrHighpressure]

did u measure the top speed?

[@donaldscott7649]

no gas filter

[@cancunence35]

What kind of bike do I need for this project?

[@Matt-fj4yv]

Honda Cr500

[@brianhoffman3589]

how fast is it

[@wildman6247]

brian hoffman i have got mine up to 32 but its happy cruising speed it in the 18-23 range my be different depends on your weight i weigh 200

[@Mollettj100]

so no clutch? what happens when you stop?

[@bikeberry]

Mollettj100 Great question! Think of it as an automatic clutch. When you stop, the engine will still run. If you want to turn it off, simply hit the kill switch. Hope this helps! :)

[@Mollettj100]

so does the drive disengange as you slow to a stop?

[@bikeberry]

Yep! The clutch is activated when you accelerate with the throttle. The clutch pads widen and grips the clutch bell housing while giving throttle. It then resets (by clutch springs) when you slow down. Makes sense?

[@Mollettj100]

does the rear brake still work or is it not needed with this setup?

[@000MACK000]

Oh what about fat tire I have 3.8 inch tires.

[@jakebutnotfromstatefarm]

Will this engine fit a 20 inch bike tire?

[@bikeberry]

We would not recommend fitting our engines on anything smaller than a 26 inch tire bike, as the smaller bike geometry would likely place the engine against the rider, increasing the possibility of injury and burns from the engine.

[@jonathanhunter1350]

I bought the kit w/bike, did not RECEIVE all parts, received some wrong parts,waited extra WEEK for gas tank because they didn't send it,still did not RECEIVE fuel valve but tired of dealing with company, just ordered from Amazon

[@AllenAlberti]

same exact thing happened to me word for word.

[@joeycottontailakajoeschmo3366]

Same here. Kit from nightmare. Anybody ever get one of these to work and live to tell about it?

[@fetconnect46]

is it very loud?

[@wildman6247]

fetconnect when your hammering on the gas or climbing a hill they are loud but when cruising around at 20mph not to bad

[@chocholo135]

What about the brake

[@jamieturnage4574]

be nice if i could buy one your all out of stock of them because of the virus.

[@user-pi8vt7ut3n]

...это плохое сцепление двигателя с колесом и куда делись крылья над колёсами, или у вас дождей не бывает?!!

[@mymadfamily1]

Send me an email please not a link to your website

[@empirevampire1896]

Why u sold out

[@joshiwu0420]

ok so i ordered this awesome motor, only to realize that this video does not show you how to install the oil tank.

[@TheAwesome722]

Have you figured it out

[@joshiwu0420]

yes, the "oil tank" was actually a gas tank for someone elses order, for the smaller size friction drive, that got added to mine. there is just a tiny built in oil tank.

[@RobertoSilva-qo2vo]

Roberto tta ttop diesel ok..triciclos..ok..😀🙏👍

[@dehoedisc7247]

The redistribution of significant weight to the high left rear side of this bike is somewhat of a significant state of instability or off-balance operation. It should run just fine, however it would be good to consider the differences compared to a normal weight distribution of a basic bike.

[@morrisjohnsonakamj6346]

this small 12 pound motor, lol the bike weights more than the motor ,you clearly never ridden a bike with a motor they all have different center of gravity,

[@VMeed-jo7fb]

This creates an OFF center of gravity

[@mooselordflanz3392]

Cant find answer to this question anywhere!!! Can you ride the bike normally without running the engine!?!?!?! You know just pedal around until you feel like firing up the motor

[@mooselordflanz3392]

How about a 7 speed rear ?

[@Colbias14]

yes just undo the lock and load thing that looks like a bike seat lock thing and lift it up and lock it off the tire.

[@liteboy2004]

Look like 30-35mph.

[@tomperalta8551]

I would lie to see one on a tri bike

[@RaoulDuke224]

Sorry buy that's a restricted motor rev limiter needs to be removed from the engine a.k.a old CDI ignition coil and flywheel and swapped it out with honda ignition coil and flywheel and now it's a powerful Motor

[@mymadfamily1]

Not wasting any more time on your website I have a foldable bike I want to know if this engine is suitable for smaller wheels

[@vulcan1753]

I have one of these, and have had no problems. I've had a number of motorized engine kits. I found the frame mount kits to be junk. Not only is the engine junk, but it is almost impossible to mount it on many bikes, the rag joint rear sprocket sucks, and the chainstay mount tensioner is super dangerous (I have the scars to prove it) No problems with the friction drive kit. Only real limitation is it doesn't work in the rain, but it doesn't rain where I live. You need a fairly smooth rear tire, the tire needs to be properly inflated, and you need to get the roller tension against the tire right. I have not noticed excessive tire wear. I am 250 pounds, and have had no problems with the clutch. You have to pedal a few times to get it going. The clutch is not designed to take off from a dead stop. Once moving it purrs right along. I would not suggest putting a motor kit on any bike that does not have a front brake. A coaster brake only works up to about 5 mph. A front V brake will stand the bike on it's nose at 20 mph.

[@dmtiski4303]

i hate how they show 2-3feet of fuel line tubing when in reality they only ship you about a foot at best making damn near impossible to mount the tank they give you

[@donball5918]

As engaging as such a "quick and easy installation" video might be, I see a distinct lack of commentary regarding various practical issues. What is the fuel tank capacity? What range does this offer? What routine maintenance matters (aside from oil change and spark plug change) should be undertaken? What is the carrying capacity of this engine (i.e., size of operator)? How does this friction drive effect tire life? Push come to shove, what is a realistic life expectancy for such an engine? At the proverbial bottom line, more or less how many miles would an engine like this be expected to last? One problem I see is the lack of accommodation (short of a backpack) for actually carrying anything. While a small tool bag might be mounted on the handle bar, what arrangements can be made for safely carrying: (1) additional fuel; and (2) anything else for that matter? Contending with the "real world" (and let's face it -- there are no end of folks who would love to "rip off" such a bike) I would suggest that a sturdy cable lock be carried by anyone who spends the money to build one of these.

[@wildman6247]

Don Ball 80_90miles a gallon about 80 out of a tank of gas change oil every 50 hours replace clutch as needed clutch life and engine life will vary depending one how hard you run it how hilly your area is and weight of rider wnd bike once you learn to adjust roller pressure on tire about a 1000 miles for your rear tire not good for wet weather roller spins when wet upgrade throttle handle great little setup for dry weather riding will do 30 mph

[@egalitarianpermaculturist7883]

DOSNT WORK GOOD FOR ANYBODY OVER 200lb THE CLUCH BURNS OUT

[@EVZebra]

+Egalitarian Permaculturist Actually the clutch only engages at around 4000 rpm so you need to pedal hard up until the engine has exceeded 4000 rpm then the clutch will be fully engaged and will not slip. If you just want to sit there and creep around at 5km/h then yes you will burn it out.

[@egalitarianpermaculturist7883]

That makes sense. Thank you.

[@AbracaDanielll]

Egalitarian Permaculturist fatass

[@burhannaveed1911]

@@AbracaDanielll lmao that was mean but funny

[@huguebegin4274]

its all good but you are looking for police hassle with these.... no?????

[@wildman6247]

hugue bégin depends where you live most states that do allow have max engine size,horsepower and topspeed restrictions for motor assisted bicycles google motor assisted bicycle laws for your state u can usually get away eith electric they dont 👂 them but your range will be limited if you ride responsible most cops wont mess with you from my experience because they often dont know the laws on them

[@alyshiakuhni8454]

q