40HP Methanol Mini Bike First Rip! World’s Fastest Mini Bike Build Pt. 2

[@CarsandCameras]

We're having to improvise, adapt, and overcome on this one!

[@justinoliver1984]

Right.... wise words from Richard Hammond. 😂

[@Tom-kg5gd]

All part of the fun 🎉

[@andrewklahn7899]

Hey John and Isaac that looks like a miniature sports bike😊

[@BobbyOfEarth]

Check your tire/fender clearance...

[@jackrickells3979]

You don’t need a chain gard if your chain is going it snap then there shit chains

[@GoPowerSports]

Yeehaw this looks like a ton of fun!

[@RJedmiston]

This has gotta be the best looking mini bike you guys have built yet!

[@CarsandCameras]

Thanks bro!

[@gerekappo]

Agreed! That front wheel... wow!

[@jlucasound]

@@gerekappo It looks really good!🏍

[@Tom-kg5gd]

I'm hoping this series will get you guys out there and you can progress your channel even more bros! Keep going!

[@The_Kman]

Sorry to hear Ike's home and guarage was flooded. Having gone through this myself, I know how he feels. God bless you guys!

[@kasuraga]

I love the look of this bike. Looks kind of like a mini cafe racer

[@tattoobeevesgarage5592]

This is just one of many builds that CarsAndCameras capability shines through. Thanks for the great videos.

[@TedPierson]

I love the looks of this mini-moto speedster. Super clean and tight.

[@dougstripp7522]

Hi Guys I know you folks always put safety first, wanting to hit your projected top speeds and being canceled twice! Just thinking out loud here do you think maybe there’s a message being sent to slow down and have fun other ways. I really enjoy watching the three of you guys work and challenge each other with all your skill at speed these bikes are designed to handle. Hate like hell to see one of you guys get hurt bad trying to prove something that really means? “ WHAT “ I’m a speed nut and live for anything with an engine on it!!! Check those bikes your using for higher speeds many times. And test on the same type of surface you will be going balls to the wall on not dirt and grass. Compression rate on each front fork should be measured as well, make sure the triple tree is square when being tightened to the forks it’s important guys. Damping the steering is good but a speed wobble sucks on a small bike. I too race and build for fun And have gone down. Just check everything on your machines at least twice. Just stay as safe as you can gentlemen Cheers Doug from Canada.

[@Ifitallfails]

Bike turned out awesome! That's a gem. I hope Ike didn't lose too much over there and it'll be fine. Good job guys.

[@baron24601]

You guys could be super heros, traveling the world with fast mini bikes solving droughts!

[@jayswaylv]

Ike I'm so sorry about that flood BS. I hate when bad stuff happens to good men. Stay strong, buddy 💪🏽

[@richardrhoads5774]

Gentlemen, that Bike is your best work, to date. Be safe on it.

[@isomer13]

Sorry about the flood damage, Ike. Nice paint and assembly montage, Charles.

[@ReverendBow]

Outstanding looking bike, and that engine sounds real healthy. Great job on the stretch too

[@Philc231]

Charles is like the modern mechanic , Ike is old school experienced guy . John is the engineering and CEO. WHEN does the custom builds start for customers ?

[@ckingsouls4325]

Dang sorry about that rain, Ike keep your head up Brother! Y’all I love the videos y’all put out! Hope you guys come out of this on top!

[@JonErikMarroquin]

I love the genuine friendship y’all have a wish I had that kind of friendship with my friends. Y’all are blessed. charles nickname should be tack-it

[@monotheis6889]

Some of these builds you do are so cool, you should invest in a powder coat booth. I've been working on a similar project for over a decade, but with a small, built v-twin. Deaths in the family, and responsibilities that came with it have really put all my stuff on hold. It's been a rough decade. I've been living vicariously through you guys for the past few years. 👍

[@richardsteele6776]

The bike looks incredible. The weather can be brutal but C&C will persevere.

[@spicy4205]

watching a true master at work well done Charles you sir are a legend

[@GooseGosselin]

Gotta say, the Sidewinder has been my favorite bike, but this one tops it. That thing is gorgeous, and really needs a name. Nice work gentlemen!

[@zacharyperkins3048]

One of the best styled bikes you guys have made.

[@jeremywood2129]

6mm plate for the chain guard, you guy's love making things heavy

[@lucassarchet6712]

You guys are killing it once again!! Can't wait to see you break the record!

[@warhog5554]

Charles is a real asset to the crew. You are lucky to have him. Keep killing it man!

[@jont0315]

I haven't watched yall in a little while and the first thing I've noticed is the overall quality of production. Video and the editing looks like yall really stepped your game up since the last time I watched. Very nice fellas. Not to mention the bike looks 👌🏾

[@darrellkelly7614]

You 3 mad scientists have built quite the monster.

[@bryduhbikeguy]

The bike's Awesome! The paint looks really good ,and sets the bike off perfectly.Ike:I hope there's not too much damage and you can get it all set right soon.

[@mikebarriball]

YOU GUYS FREEKEN NAIL IT WITH THIS ONE! SHE LOOKS SO FREEKING GOOD. I WOULD LOVE TO HAVE THAT BIKE. SHE HAS A PERFECT STANCE!!! ✌

[@cadezipperer7298]

Love the content and I'm happy I found the channel, y'all have reignited an old hobby at my house, just finished up a spider box like y'all used to have, and dropped a 459 predator pushing a 40 series TC last night first ride will happen today hopefully but it'll have to wait until I finish this episode. A minibike is my next project and I want to use a modded 420cc probably won't be quite the same level but it'll be quick. Regardless thanks for the motivation and great content!

[@legacyhauler5560]

you guys are the reason why i got into mini bikes

[@deejackson5930]

That's the best looking thing you guys have done. Outstanding!

[@jlucasound]

Wow. John knows about "death wobble". Scary stuff. I'm not surprised. After all, John is an Engineer.

[@kerrypierre9494]

WOW,, you guys did a great job on the bike. Can't wait to see it rolling down the track.👌🇺🇸🤘👍🔥🔥🔥🔥

[@kaseyjones4143]

just like to say ike man i hope you didnt lose to much brother and hope all is well sorry the water got you . i love this build the power to weight ratio is insane hang on tight and bring some extra undees you going to need them lol . keep up the great work guys .

[@mikecurrington5641]

Cars and cameras .My favourite you tube channel by a mile

[@LeonardMagnusson]

westport here i wanted to thank you for actually doing some thing with and object that you have built. just putting something together and going tada is not people want. i mean most anyone can put crap together. but to put to the test. you got my interest.

[@streetlegalbuilds7644]

This probably has to be one of the best looking mini bikes you guys built!

[@peterland7388]

Love this little bike! In January 1907 Glenn Curtis set an unofficial speed record of 136.36 mph on his hand made motorcycle using a 40Hp V-8 engine that he also built...so you guys are definitely standing on the shoulders of giants! Good luck guys.

[@larrycarlston4044]

I like Ike's haircut. The Dutch boy haircut was popular back in the 60s. Ike is making it work.

[@jlucasound]

I hate to do this. "Takin' a kid in a toy store and then takin' 'em out." I just about filled my "Depends"! 🤣😂😳 Kudos, Charles!

[@FinalFinishDetail]

Love the build. The fairing reminds me of the very first terminator movie with the bike Arnold drove around. I think this bike should be named TERMINATOR 2.OH.👊👍👍

[@32awosome]

Loved the transition of the clutch guard. Funny but good editing. Haha

[@philiprowney]

That looks like a mini Bobber, visually it just works!

[@theodoredugranrut8201]

Right on Charles you have always been my favorite fabricator.

[@Generic_Eric_1977]

Good vibes sent out to all you guys, Ike in particular. Hope everything is ok and nothing got damaged beyond repair. Glad to see you are all safe!

[@shaundonahue4621]

I agree with the engineering on the stretch. It looks good to go Ike. Good job on the paint and reassembly Charles. The decals were a really nice touch.

[@dennisatherton1454]

Hey thanks for the video !! I do have a suggestion for you guys when your painting, when your going to use spray cans of paint you need to get one of those handle deals that clamp on the top of the can and work the tip by pressing the lever , it makes using a spray can of paint so much easier and gives you more control, once you've used one I don't think you'll want to paint without one , and they are cheap to buy I just looked it up and it's called an aerosol can trigger handle

[@rickgille1535]

Awesome build guys yall got it made keep it up!!

[@nirodha7028]

‘We got some rubbin’ goin on but we just gonn’ send it!” (Paraphrasing here) Also: Damn that bike is beautiful! Such a raw powerhouse… Looks badass!

[@ZoZo-fc1we]

Great bike! Very fast! Be safe when you ride! (120 mph)

[@theodoredugranrut8201]

Right on Ike you have always been my favorite fabricator

[@Robert-ni6ut]

Just love that costom 🔗 chane guard and seat 💺 gave me 💡 ideas on my own. Next project 😃

[@itsemilyyalll]

It's mother nature's way of saying triple check everything and to make sure all safety procedures are in place

[@jonathancrissinger2301]

Great video, really bummed about the unfortunate news about Ike and his flood damage. I will be praying for you all. See you in the next one.

[@lanceneuman9528]

The proportions are spot on, nice guys.

[@BeachFishingAnticsUK]

Bike looks fantastic and I hope Ike's place is alright. My thoughts are with him. I'm sure the Cars and Cameras community will step up if he needs anything. Regards, Chas x

[@Nunya_Bidnez]

You're builds are getting nicer and XP and Charles are to blame. Let's go.

[@Philc231]

Special affects ,good job John .

[@richb313]

Can hardly wait to see this bike run.

[@jhaedtler]

On Aircraft when installing rod ends like you have on the dampener it is advised to install a fender washer at the rod end in case of a rod end failure. It will hold things together and not allow it all to fall apart!

[@5iffty]

The rear fender looks super dope

[@tougecivic]

Moorsville definitely allows mini bikes they run all the time, this Thursday will be the only Thursday I won’t be there😭😭 hate ima miss you guy but can’t wait to see the video ❤️

[@thatmoodykid1893]

I’ll be at the track tomorrow I’m super excited to see y’all and prayers for a speedy recovery from the flooding!!

[@shiftymiata]

This thing looks and sounds incredibly cool

[@Qmountainkid]

Well John, id say you just named this bike, "HOLY COW" so paint accordingly! Hopefully you won't have to call it Strike Three lol keep your heads up fellas you do awesome work.!

[@williamstamper442]

Around 21:00 i agree thats a darn good guess. A 9.20 eighth mile is like a 14 second car...not exactly setting the world on fire until you put your butt that close to the ground on a machine that small. Ive got 8oh minis and they are a freaking handful. When i started my stock-ish looking doodlebug went 10.10 with wheelie bars. Keep going and you end up with a 12 second quarter mile mini that weighs 250 max with a rider and the power to weight is insane and it gets scary. Being a man, one tends to keep on keeping on anyway and go even quicker. Its fun stuff and not that hard to do, but please be safe when you go out there to play around...that means wear a helmet and leather and shoes or boots and just try to keep it on two wheels.

[@hikingandrcs1728]

Absolutely a beautiful build keep up the great work!

[@CraigE415]

WOW guys, shame about the weather and hope everything is okay but man... the bike looks amazing the frame mods look premium. I would love to have this bike and I'm sure I'm not the only one. Keep up the great work! 😁👍

[@Skiridr22]

Love the finish touches it looks great

[@williamstamper442]

Ive already posted 2 or 3 times but one more thing boys...very good cinematography on this episode! Done well and y'all just keep getting better and better! Love y'all, and sorry for the water rising Ike. Can't imagine watching that happen but i know you are tough and will get thru it all.

[@theodoredugranrut8201]

Right on John you have always been my favorite logistics pro.

[@OGjerseyfice]

Anyone else getting Toecutter vibes from this build, mate!

[@WingmanJohnny]

Yins guys got to do what you gotta do. Keep up the great work

[@williamcummings6562]

That’s a monster ! Love it guys !

[@theodoredugranrut8201]

Central California watching

[@myrtlemorgan1937]

Wow Ike prayers on ur place I've been a fan for a long time since I was 14 now I'm 23

[@BUILDNIGHT]

hey guys, that bike looks AWESOME! Couple of suggestions... Maybe add a second steering damper on the opposing side. That one is kinda light duty for going over 100mph! Also, the exhaust up and out the rear at the beginning of the video is much better than the one aimed at the ground later in the video. Careful not to catch it on the ground in the corners! (Same for the footpegs!) I realize you made this for a straight track run, but if you're running it on the Cars and Cameras Grand Prix, be careful! SEE YOU AT BUSCO IN A COUPLE WEEKS! -Glenn Build Night

[@Rocketguy6969]

I think the front fairing needs a shot of black paint. Yall have really stepped up the build quality! Ive been watching every episode since your very first video at your parents place! Lots of big leaps in quality!

[@tboyd6950]

As in any attempts in land speed racing or top speed pursuits tires are always a limiting factor I doubt those are the best choice hope you have them balanced

[@racerothery2716]

Oh god this definitely what I needed right now bro. I’m fixing to put my reinforced 236 stroker together here within a week or so depending on parts shipping from GPS. As far as i know I’m the first or one of the first people building this specific bike that I just got. Spend a G on a nice bike and tear it down to make it Super bad. So the MUDSTAR 200 is getting 4” higher suspension all around, hydraulic breaks, 236 with GPS 285 cam with built head and billet ratio rockers w/24mm flat slide… #420 chain and sprocket with a god blessed JUGG-A -VERTER should be epic. More to come but I already spent 3K on this project and she’s not even done yet so time will be my friend on this one otherwise I’ll go broke if I let myself 😂😂

[@anthonywitz9575]

Don’t know how much I like the chain going through square tubing but it is safe

[@Tom-kg5gd]

I reckon a dancing arm with an idle sprocket on that long stretch of chain is a good fix

[@robbymilligan9639]

Wish u guys the best on the flooding

[@captain_coleton]

Would you guys ever do customer builds. That mega moto looks awesome stretched.

[@joshblainer2652]

It looks fantastic. Good job boys

[@ironhorsethrottlemaster5202]

Wow that can guard cut reminded me of this old Tony

[@gtcbr600]

that bike looks cool looks like its out of Mad Max

[@geoffreyjones2000]

I like the bike builds the most

[@dannyoutlaw8001]

Hey fellas you got your hands full with being the fastest mini bike...I just seen one run a 6.79 at 91mph in the 1/8th mile .... that's pretty fast on a mini...but you guys have got a nasty motor for sure and I think you be right there with it ..

[@JimCooper-f8g]

Ideally the upper/back seat to frame support tube should be reversed so it's more forward at top and going back and down towards rear for any real strength. Your way was faster for sure. I might stretch mine in same manor. Cool bike!

[@marksmithson1414]

So sorry about your place getting flooded Isaac and all of your stuff getting damaged. Hopefully you can bounce back buddy.

[@im_ur_huckleberry8998]

That bike is freakin sweet!! Can’t wait to see how fast it goes!!

[@bczarrockbeast6264]

That thing is sick looking great job boys!

[@g-force2745]

We need to see more of Ike's magic! 8:21 😃

[@BIllMcCambridge]

Damn it Ike I feel for ya brother. One question guys why not put a torque converter with jack shaft you have extra distance due to the enhanced wheel base?? That would allow you to get to speed quicker and allow more room for stopping. Good luck and thanks for sharing yalls talents and adventures!!!

[@chicken7754]

This bike looks amazing

[@tonynorris7042]

That thing is TOTALY BAD ASSS! On a sadder note so very sorry about the flooding.

[@TheIndoGod]

Amazing That Small Package Makes 40hp

[@power2thepeople53]

Awsome looking bike!!! Good job guys