420cc Mini Bike Build Pt. 3

Our Predator 420cc Coleman CT-200 mini bike build runs, but we needed to button it up with a battery for electric start, wiring for the headlight, a rack for mounting gear to, extra width for the foot pegs, and touch up paint.
Thanks for Watching!
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
40 series TAV kit: bit.ly/38kKEP1
420 pitch sprockets: bit.ly/3b9yX3G
Spun aluminum fuel tank: bit.ly/3Qvdoun
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Shirts: www.cars-camera...
Camera Gear
Sony a6500: amzn.to/2qWhMWR
Sandisk 64GB memory card: amzn.to/2ooeu1X
GoPro Hero 4 Silver: amzn.to/2ood5Zc
Rode Videomic Pro: amzn.to/2panPHy
Garmin Virb X (HOW WE GET MPH ON SCREEN): amzn.to/2qa2Nvs
Gloves: amzn.to/2qSV6JM
Welder: amzn.to/2rafwMs
Carburetor jet drill bit set: amzn.to/2qaaUbc
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@kpsgarage4197]

This is a comment for ike. Ike you are such a sweet sweet man and i love your vids man you are a awesome well rounded human being you alwayd have a smile on your big goofy face and your always so positive. Whenever i have a hard day i just watch a couple of your vids and it makes my day way better. Thank you for being you ike.

[@MoondyneJoe]

That bike is looking fantastic Guys a huge well done And we can't forget Thank you go Power Sports can we?

[@MrPeterbilt1971]

Haven't seen a single one of them in action. But love them all already. Outta be a blast to ride.

[@mowler8042]

The go power sports people are awesome! Will make sure I visited them on a motorcycle trip. Thanks to them to letting us see their shop and giving the boys the shop to play in.

[@ViolatioNVibratioN]

Y'all should have gopowersports sell that rear rack. I'd buy it in a heartbeat.

[@Ghost88890REAL]

Wow that electric start really changed the game, hella impressed.. might do this on a baja warrior.. (now it's called Massimo warrior)

[@TylerBerryFilms]

The predator engines are awesome but I feel like you guys have put them in just about everything by now haha. Hope to see some pit bike/4 stroke motors with gears some day!

[@Aehzur]

Me too, love the mini bike and quad stuff etc, pit bikes would be cool :)

[@WombzyR6]

I know this comment was four years ago lol, but I'd like to see a duro max 420cc in one of these. They make even more power and look cooler as well

[@joshseagraves1453]

Colorado + Grown Men + Mini Bike = RL Dumb and Dumber! On a real note, Loving the build vids!

[@ghomerhust]

my local moped crew built a near-perfect replica of the dumb and dumber minibike for a show this summer

[@joeschmoe3202]

🤘 REPS!!!

[@MrJakedaddy]

As a welder, watching these guys weld is nails in a chalkboard.

[@bassboy9792]

U should talk to go power sports about developing a Kevlar belt for the tav so that you can go threw water without ruining the belt every time

[@SurlyMike]

Thanks Go Power Sports!

[@richardmattix5322]

Thank GOD for Dave!!!!!

[@ssoltys4128]

Boss Hoss of mini bikes

[@kyfiss9176]

Put exhaust heat wrap on the header so you won't burn your leg

[@humpday2267]

Like that does anything lol. The exhaust is still gonna be hot as hell

[@kyfiss9176]

@@humpday2267 im not even going to waste my time arguing about this. It's a 3 year old comment bro. Exhaust wrap definitely helps and you are wrong.

[@humpday2267]

@@kyfiss9176 it might help but it’s not like you won’t get burnt if you touch a heat wrapped hot ass exhaust. Just saying dude lol

[@johnjriggsarchery2457]

Sweeet! A Special Forces' airliftable assault minibike.

[@coreyconachan2553]

Plasma cutting super close to the gas tank, it'll be fine

[@rebeldad1344]

Heat shield or glass wrap that exhaust or you're gonna brand yourself.

[@brennanfrakes6481]

I love that all the space in the frame is used it makes it look so good great job guys

[@rex4x4]

It's amazing what u can accomplish in a shop with everything u could possibly want ..... Great job guys .🤘😁🤘

[@jonathanvonpappen7237]

Happy Birthday Ike

[@isaacitllbefine7231]

thanks

[@BrandonLatchman]

man I miss it when u guys did like 30 min videos and shizz bring them back please I'm a huge fan and I miss those oh and do more stuff with lawnmowers lol that was the best

[@tonadriontate9546]

Love the built It will be finee

[@chevyguy5525]

ISS THE 420 BIKE!!! 🌴

[@pman1335]

Quality rack. 10/10 would bang. Down a dirt road

[@RadioAndy6]

Drinking game: Drink a shot everytime they say "itll be fine" or "its fine"

[@codykamminga9667]

Curtis Wilson i’m now drunk

[@michaelskagen1]

Or testing reasons only

[@goodreviews7323]

Ike looks like Ricky Bobby. "If you ain't first your last"

[@TheIrishAmish]

Isaac, the tip of that plasma torch IS NOT A HAMMER!

[@Deucealive75]

Hopefully the slime helps out. If I were going to do any serious off road riding, I would get better quality tires. I do not trust the tires that come stock on the Coleman at all. And you guys added a ton more weight to the bike.

[@mikestinyshedofdreams]

hang some army webbing pouches from the luggage rack for extra storage, nice bike!

[@isaacitllbefine7231]

thanks

[@saucexgod_]

That looks beautiful!!

[@PaulieDetmurds]

Nice vid, now back to the Vintage Mower! (Rugg Mower)

[@gphilipc2031]

Real men of GENIUS!

[@enduroridersmiami6288]

Good job guys I want to do that to my ct200u-a it looks sick

[@johnnymack8442]

That's a nice bike. Even more now with the mods you have done!

[@frankschultz4569]

You guys need some welding gloves.

[@damon3903]

"It'll be fine"

[@Str8offdamuscle89]

It would be nice if you can make it street legal

[@ZillionPrey]

that's not that hard in the USA

[@Nangjelovski]

randall Turner they just need to add turn lights and stop light and it's ready to register

[@sethk1429]

Nangjelovski they don't even need turn signals, they can just use the hand signals they teach you.

[@vicsmotos3702]

Seth K it's not before 1973 they need to have turn signals

[@6.4_swervo]

victor trout nope. I have a Baja warrior with a headlight, tail light, brake light and turn signals

[@richc9503]

It's been cool to watch you guys, especially John's, skills improve over time. Impressive, keep it up!

[@JasonBrower]

"What do you mean shrug." Nice

[@theeturnone]

lol

[@christianmarks6964]

I love your video. I need that

[@user-sz3qb4mv1l]

The laughs of sleep deprived mechanicing and snarking remarks is what I live for.

[@Loganpeterson_bntg]

I love watching you guys

[@jasonpetrich4141]

It's coming along very nicely guts. It might need some small bash bars on the sides. Just incase it's dropped on the high side just a thought the air filter is out pretty far. Awsome bike guys!!!

[@BigBoyLies]

"im not throwing my burger" "go faster" lol

[@TonyFleetwood]

im no expert, but when you were welding the 2 halves of the rack together, shouldnt you have made a bevel edge on the tube ends first? i know its not going to hold serious weight but the weld comes out better and is easier to clean up... either way love the build!

[@kevinfrmkdz]

Tony Fleetwood haha you must be new here, almost everything they weld is questionable, but to answer your question, yes, beveled edges penetrate better than just butting up the edges and welding over them thats how my harley frames get welded when I either build a frame or throw on a hardtail

[@TonyFleetwood]

ive been subbed for about 3 years

[@kevinfrmkdz]

Tony Fleetwood same here, but youre barely questioning their welds? Lol their whole trike build had me cringing mainly because it down tube was made with galvanized pipe haha

[@TonyFleetwood]

i suppose you're right, but that was then this is now. back then i didnt question it because of the amateur status, but all these years later i suppose i expect better from them? meh. it'll be fine.

[@lanceyoung5940]

I wold like to hang out with y’all and learn some more mechanics skills u r the best mechanic I know I Watch y’all all the time

[@swiftfishin5680]

does the motor run on THC🤣

[@509ryan]

I run on THC

[@sethsmokes4202]

@@509ryan same lmfao

[@Rush-qr1ve]

Lol

[@chawizaud]

Best build so far!!! Love it! Wish I had one

[@isaacitllbefine7231]

thanks

[@chawizaud]

Why did you guys put slime in brand new tires? Just curious

[@CarsandCameras]

They can leak, even when new. Unlikely, but we didn't want to take the chance in the wilderness 30 miles from a air pump.

[@chawizaud]

That makes sense

[@trav_thesav_]

Bad ass build guys. Great job. Looks like a show bike

[@dustinkeith5380]

Add a brace from the down tube to the spacer

[@jeepcollector91]

Could have added a small gusset from the foot peg extension to the vertical upright on the frame.

[@matthewcousineau56]

You guys really need to make a manual transmission that can fit on a 212

[@a.k.dailey4642]

😂😂😂😂😂. Educational and entertaining. Thanks.

[@GBodyGarageRacing]

you all need to make a complete parts list of what was used and prices so we poor folks can get an idea of costs.

[@coldbloodedfasist5536]

_I'believe I'have faith in you guys!_

[@lil.mountenlighting7682]

Tier slime trick step on the bottle and it goes in fast and easy 👌

[@shawnmcintyre4773]

In search of an engineless Coleman mini bike for a winter project !

[@91Bronco]

Dude that thing is such a beast. I was thinking of swapping my 196 for a 212 but shit I might go for this now lol only difference I would do is I would take the fake gas tank off and mount a peanut tank on the frame

[@bvisel4558]

Mill the head for higher elevation. You will lose compression, you don't have the pressure pushing in through the carburetor to fill up the combustion chamber.

[@SlimThugga2012]

I’m about to build mines the exact same way. They built that mini bike into a mini Harley 🤣🤣🤣

[@aidenemrick4981]

Wow almost a month watching a mini bike that is already done and we have haven't even seen it go off-roading yet

[@bradley1995]

We're just gonna leave this mess. Taylor can come in cussing about it in the morning... Sounds like me and my boss lol

[@GAMERJAG]

Across the street was a dance class my sister went to

[@nicoleeilander5114]

Always disconnect the battery mate b4 you weld!!

[@derekkennedy4323]

That battery does look small enough to put in a gas tank then it doesn't stand out where everybody can see it

[@theeturnone]

or it wont be sticking out to get damaged off roading. . just a thought. . If the keep it where it is, maybe, not even a battery box, but a small piece of metal on the outside surface to prevent puncturing it. . just a thot. . peace, Eric

[@jaynegus4526]

You guys should build a high performance Rokon.

[@wyatts1537]

Your gonna want a led in the light, those are really weak

[@donbot5000]

battery was probably mostly dead from testing also when the bike is running it will be much brighter.

[@6.4_swervo]

Keep calm and wheelie I have the same headlight and I took a high beam bulb from a Scion FR-S and modified it to fit! Works like a charm!

[@wyatts1537]

Cinco Ranch Mini Bike Club I may consider doing that

[@eriksimca9409]

its 6 volts.... youre lucky if you get a bright light from 6 volts

[@dustinshort6207]

Erik Simca I thought it was a 12 volt system.

[@josepherickson7618]

Love the video badass mini bikes

[@isaacitllbefine7231]

thanks

[@Boardupman]

Thanks!

[@Hammerjockeyrepair]

funniest part of that with the buell blast is that this 420 is only 72cc smaller than the blast

[@splob1981]

I'd like to see another budget kart build.

[@isaacitllbefine7231]

cant remember

[@splob1981]

Can't remember what? I'm saying I'd like to see another one of you can.

[@indysputed4885]

I think it would look real cool if you made the torque converter cover look like a harley primary cover

[@gaelenbolland7787]

Looks factory!

[@djguy314]

That is by far the freaking coolest thing you guys have done. Sweet job. I need some help on my 71 Honda Odyssey restoration. Thinking about a 420 for it. If you're ever in the Saint Louis area, let me know, I got BBQ...:)

[@maxwell6774]

Itll be fine

[@MrUVENETWORK]

love your videos guys..........new to mini bikes.......my son and i would like to mod our baja mini bikes....soon

[@lox2449]

love that video

[@crackerjack9608]

i have the exact same bike i painted it black and left the baige and it made it look like some desert storm type shit

[@kwanblillz1514]

you guys are awsome

[@beaualexander2731]

Have you guys ever even considered attempting to build a 70's style ultralight plane with a pred 420?

[@1badk20]

I would love to find a frame similar to the Coleman, maybe a tad more room for an engine, and throw in a built Predator 670. 40-50 Hp on tap, wide rear drag tire with lightweight skinny larger tire up front, and a wheelie bar. The Coleman CT200U Frame looks perfect for a Predator 670 Twin, you just need 18" of Clearance in height to fit one in, engine is about 16.5" tall.

[@lakejonggg]

Time for some boots John. lol

[@bctrails7206]

nice build!

[@bruceyoung3044]

I’m doing this swap but I need pointers on a few things !

[@bwxmoto]

Try 5 to 6 psi in the tires without suspension. Soooo much nicer. 10 psi is brutal.

[@ScottRidesHonda]

Nice welding gloves....

[@rncboy2]

Loving the bike it. Stafting to look stock now lol anyways i think you guys should do a race at a oval track with the race karts

[@isopoeka4913]

Duude thats so sick, it loks like a Honda Monkey z50j on stereoids xD

[@terrysmith6428]

those tanks should hav been mounted were that fake tank is. together between seat an bars in close to give more leg room an a place to tuck knees in close on the trail ,an air cleaner should have longer pipe so it can mount to the rear carrier rack on back along frame tuck in by rear tire instead of out to side were it can get caught in the bush on trail

[@pogonick55]

All the yes.

[@Kdog307]

Hey I also have the trailmaster mb 200 the full suspension mini bike and I notice there is an extra wire inside the headlight witch is really dim. Can you shed some light lol like is the un used wire another amp sorce from stator? Splice in to make light brighter???

[@Kdog307]

The trailmaster

[@JerryWick]

kenneth pauli "shed some LIGHT" I see what you did there lol

[@dominichoffman5687]

What is a tillitson carb and can you do an install video on one

[@isaacitllbefine7231]

I think we did a vid on it but it hasn't been uploaded yet

[@jiimmyboy63]

Ike's got a Buell? Would love to see it in a video.

[@lukepucel2696]

They should sell these bikes

[@Forty1Performance]

You can buy the og bike at tractor supply but if you mean the one with the 420 in it then I agree

[@marquisthompson3073]

I have a go kart older than me with a 5hp Briggs and Stratton motor I’m willing to trade all it needs is a fuel tank and carb was very fast

[@kierenschulz9240]

Hi cars and cameras

[@isaacitllbefine7231]

yo

[@user-fl1jv9cv7z]

Been watching yall for a couple of years now. But this video series makes you guys look like rockies all over again lol SCRAMBLE

[@user-fl1jv9cv7z]

Rookies *

[@Cam-fo6rh]

Dang my predator 212 with the preformance kit and 30 series goes 43 with governor

[@kwcslvr1]

Great job guys, it's a beast for sure. Wondering if that 420 has a stator and a regulator to keep your new battery charged up? Also, how about a reminder to grab some of those chain links that y'all have been mentioning to grab from Gopowersports while you're there!

[@williamh_2x693]

I would put a piece of metal between the airfilter and the tire

[@winstonweeks8029]

I moded it a little also