2 жыл бұрын
2 жыл бұрын
Пікірлер
@dustinguriel620 Сағат бұрын
they stole some of the most valuable pieces of this car! The Recaro seats and the Speedline wheels! I hope the customer didn't over pay at auction for this car!
@mikebachmann4590 7 күн бұрын
Do you think removing the paint around the seal would be better or no?
@bradr539 17 күн бұрын
What rods were used? Thanks
@969Garage Ай бұрын
Great video. Almost gives me the confidence in doing this kit my self ... almost ....
@War-pw9kx Ай бұрын
Do I use the same size push rod that was in my old head?
@jarednewburyvlog9973 Ай бұрын
Did you need a tune for this? I'm currently about to do this with my veloster. And it doesn't look that bad at all!
@SavageProductionsCars Ай бұрын
No tune required since I'm spraying such a small amount, but a tune would definitely help.
@JimBuffalo Ай бұрын
Awesome looking Crown Victoria ppv interceptor 😎🚔
@juliesmith7640 Ай бұрын
What is the name of the parts store in PA?????
@kingkobra8774 Ай бұрын
When it comes to small block Ford is there a lot of bad videos out there that try to show how to adjust valve lash. I'm glad someone actually showed how to turn a motor over correctly.
@6spd85notch 2 ай бұрын
Sounds perfect
@XStraightEdgeNightX 2 ай бұрын
When I heard slow, I was hoping to see a Kia Soul and Toyota Corolla panting down the road. I wanna see some SLOW car races.
@BlackYellow_s7 2 ай бұрын
How were you able to lengten the vaccuum line from the VC50? can you just pull this out of the controller or do i have to find a nipple socket to lengten the vaccuum line to make it longer?
@SavageProductionsCars 2 ай бұрын
@@BlackYellow_s7 I attached another vacuum line to it
@BlackYellow_s7 2 ай бұрын
@SavageProductionsCars Wow, thanks for the reply. I wasn't sure if you were still active.🙌🏾
@SavageProductionsCars 2 ай бұрын
@@BlackYellow_s7 Yep, just not uploading atm
@Kevv9x 2 ай бұрын
Idk what to do I got a 93 5.0ho tbird im about to do head and upper and lower intake manifold idk if its worth it might as well just save more right and rebuild the whole thing ?
@HC-xs6ek 2 ай бұрын
Why didn't you replace the front and rear thin felt strip weather stripping at the top of the t-tops? I came to this video hoping to see you did this because I'm replacing mine. You did remove the rivets that i saw in the beginning. Has to be leaking like crazy now. Found someone on here that did what im talking sbout... kzbin.info/www/bejne/b6iyiaenlsaAgNksi=13bAMCRJcQUGp5sb
@kj475 2 ай бұрын
People who have the money to trade in collectables and deal with auction houses usually have a guy at each location they bid that they trust.
@pdandy88 3 ай бұрын
This car now has long tubes on it but still on 93. I’d like to get it back on e85 if I can get in touch with Adam
@pdandy88 3 ай бұрын
I own this car now
@SavageProductionsCars 3 ай бұрын
@@pdandy88 nice! Hope you're enjoying it!
@1bad347capri 11 күн бұрын
How did the motor fit with such a small cowl hood?
@markwells5645 4 ай бұрын
L
@bullfidde 4 ай бұрын
There is no 55 impala Biscayne. In 1955 Chevrolet had 150, 210 and bel Air. In 1958 the 150 and 210 where dropped and the models was named Biscayne and bel air. And a 2 door hardtop coupe or convertible was added to the bel air line up as the top of the line. Those cars where named Impala. And the impala was top of the line until 1966 when the caprice was introduced.
@mikecece947 4 ай бұрын
You quit making videos???? Still in business
@SavageProductionsCars 4 ай бұрын
@@mikecece947 no videos at the moment, but still in business, yes
@hausmanaaronw 4 ай бұрын
Tell Trick Flow aka Summit Racimg to start reproducing the efi upper/lower for the 351w.
@cwbuilds9215 4 ай бұрын
Kennedy bell is the ultimate dream for my 05 town car
@whitegoodman7465 2 ай бұрын
Looking at one for my town car, kenne bell seem to be the best for these 2v 4.6.
@83glxcrusin97 4 ай бұрын
What can a guy do when the guide plates allow to much side to side movement of the rocker itself... I have a couple that are running on the edge of the valve stem based off the wear on the rollers... But the opposing rocker on the same guide runs perfectly straight.. only have 500kms on the build and it was built at a reputable company
@SavageProductionsCars 4 ай бұрын
@83glxcrusin97 without split guide plates, you just have to adjust them where you get the least contact on both sides. The tolerances are pretty good, but not great, so you should only get some minor rubbing, which will be fine over time. Maybe change your oil a could more times than you usually would after break in. We had the same issue a few times, but it all turned out okay.
@83glxcrusin97 4 ай бұрын
@@SavageProductionsCars Awesome thanks 👍
@johnhill484 5 ай бұрын
What is the lowest clearance valve cover you can put on those heads
@CashedOutCars 5 ай бұрын
Nice video, thank you. I’m working on doing head gaskets on a 302 swapped Miata and this helps a lot
@christopherhasty8697 5 ай бұрын
I hate to say it, but you are wrong, an 89 TTA has a Mass Air Sensor. The only thing the MAP sensor controls on these is the boost gauge. Anyway, too bad that the engine was roached out.
@Texasbroski512 5 ай бұрын
Dang wanted to hear the start up from the outside
@kingfratetrain7634 5 ай бұрын
Do I need to take off the supercharger to replace spark plugs?
@sactown1200 5 ай бұрын
Can I put That Kenny bell on my 2010 Lincoln town car.
@kfl611 6 ай бұрын
In the 1960's when I was a child, I thought Studebakers were so funny looking. Now I think they are really cool. I want an Avanti. Too bad they went out of business.
@joselinovaamonde7647 6 ай бұрын
SVO intake manifold , father of BULLITT intake manifold .
@noahmarshall8041 6 ай бұрын
Will this work on my automatic new edge?
@RitchieHarris-h9f 2 ай бұрын
Yes this car is a automatic
@PhantomShane914 2 ай бұрын
No
@PinksGarage 6 ай бұрын
Did you mount the pump with only 2 bolts?
@edwardj1549 7 ай бұрын
What's the cost of this build?
@Carnage_5.0 3 ай бұрын
The supercharger alone is like 6k
@DianePodlesney 7 ай бұрын
Did you end up doing any kind of tuning after the install? Great build!
@RandDCustoms2 7 ай бұрын
I have a 2013 Camaro SS with the LS3 6 speed. This is my future plan. Nice build.
@paul5683 7 ай бұрын
This would have had a 3 speed shifter on the column. No directionals , no interior mirror, only one tail light/break light. They didn't come with that silly spot light either.
@johnhawkins1957 7 ай бұрын
Granny 4 speed was optional on 1/2 and 3/4 ton, so it may have come that way. I had a 53 3100 that was original 4 speed many years ago. It certainly didn't come with the goofy trailer style wheels LOL.
@traehubbard1051 7 ай бұрын
Hello Justin, my name is James and I'm am looking at purchasing this exact car from the current owner. Could you please tell me your thoughts on the car (body and drivetrain wise) before I do. Love your videos. Thanks in advance
@SavageProductionsCars 7 ай бұрын
Hey! I asked my dad (Dennis, who recorded this video) about the car, and he said this: The car was a nice car when we had it, but it's also changed owners at least once already. The heads were too small for the 408. I'm not sure about the cam. I don't think it was a good match for the engine. It had shorty headers that had one tube smashed to fit. Adam tuned it, made low 400 to the wheels at a lower rpm, but didn't have power up top. If someone would put the right heads, cam, and longtubes, it would make much better power. It had flat top pistons, which makes compression on a 408 with the right heads. Adam tuned it on E85 because of the compression it had.
@traehubbard1051 7 ай бұрын
Thanks a lot guys!
@chunkafunk81 7 ай бұрын
love this! but get rid of the music
@Malcolm-ed3fx 7 ай бұрын
Would Y’all By Any Chance Have Tuning Capabilities For Moates Chip ?
@SavageProductionsCars 7 ай бұрын
Nope, that'd be Lee Blankenship of Blankenship Tuning and Performance. The guy is a wizard with the Moates.
@Diddy_Do_It2037 8 ай бұрын
That’s gotta be the smallest kenne
@rogerweiland6384 8 ай бұрын
Production on the GNX was 547.
@EastDallasKicks 8 ай бұрын
Woah, im going to he doing a 4.6 Triton build but will be getting a vic after. What state are yall in incase id like to have yall source and install the kit. I really dont like putting huge amounts of money twoards a random online website but am not opposed to a dealer with connections that would take my money and order and install the kit.
@SavageProductionsCars 8 ай бұрын
We're in Kentucky! We can also drop ship.
@Theemikebell 8 ай бұрын
can this work on automatic mustang
@RitchieHarris-h9f 2 ай бұрын
Of course it will.
@PhantomShane914 2 ай бұрын
No
@jarvislarson6864 8 ай бұрын
You only live once....i wasnt around in 69 to experience 69 camaros when they werent antique so regardless how nice im driving the crap outta my 69,not worrying about rock chips or rubber stuck to the bottom of the 1/4 panels from burnouts and drive rain or shine...when im dead what do i care about a car or care its condition for the next guy?!
@jonyovanno4145 8 ай бұрын
What’s the part number on the push rods?
@Husseyfied 8 ай бұрын
Great vid, I believe I have the same issue on my '62. You said you may want to use MMO on all the springs, but wouldn't the o-ring stop oil from going down the valve?
@paulzmick3123 8 ай бұрын
Very well done. Working on a 351W rebuild.
@jacksonmarshallkramer5087 8 ай бұрын
Maybe tune it and set the timing.
@jacksonmarshallkramer5087 8 ай бұрын
Old school cabled hood pins would be badass.