43 - Artemis P15 Review: Is This Air Rifle Worth Your Money?

Рет қаралды 5,295

HFT Shooter

Күн бұрын

Пікірлер: 30

@BobParker-gm8jf 2 күн бұрын

Just been to my local range tonight. My friend let me shoot his p15, cracking little gun I wouldn't mind one for myself

@hftshooter Күн бұрын

Yes, it is as great as a ratting gun. 🙂👍

@louigi6001 2 ай бұрын

At full power (around 36J on .22 ) it's around 50 shots from max fill pressure till you start noticing important POI drop. I too 3d printed my own baffles with 7mm holes. 8 of them just 2mm longer each ... that really quietened down the rifle, not quite as quiet s your one but quite enough to be neighbor friendly. Also 3d printed trigger guard with over-travel stop regulation. I don't own any expensive rifles but among my cheapos this is my favorite: light, compact and reasonably accurate for it's budget. I did get a big headache when the popper valve cracked and started leaking but I DIY solved that and now it's up and running again with added benefit of polished hammer and valve spring tips, hammer and sear. I do get better accuracy from nine: about 25mm at 50m with JSB jumbo almost 16 grain ... maybe the rifle likes it better when shooting at around 265 m/s.

@hftshooter 2 ай бұрын

Thanks for sharing. Certainly a cheap fun rifle. 🙂👍

@johnnyhouston9913 7 ай бұрын

Cool video Jeff, another good watch for a Friday.. and I learned a few things to, so what's not to like.. have a great weekend.. ✌️👍🤟

@hftshooter 7 ай бұрын

Thanks, you too! 🙂👍

@pjgtech 7 ай бұрын

Thanx for the video, cheers

@hftshooter 7 ай бұрын

You're very welcome! 🙂👍

@markprotheroe4057 7 ай бұрын

mines putting pellets through the same hole at 30yds if i do my bit but i polished the barrel and recrowned it to achieve the accuracy.When i bought it the crown looked like it was done with a hammer and chisel.

@hftshooter 7 ай бұрын

I always planned to do a bit of fettling with mine. Looks like they're very easy to work on. But this has to go to pay for something else. 🙂

@Getting-Older 7 ай бұрын

Nice review, thanks for sharing. how do you find the scope for clarity?

@hftshooter 7 ай бұрын

It's actually a great little scope. Clarity is fine at 50 yards which I guess is all you need for sub12. 👍

@Yorkshire-Frank 7 ай бұрын

Picked mine up in the sale for £299. Quick clean of the barrel, slight adjustment of the trigger and it's spot on. Tinkered with the shroud internals and fitted a mini flat boy made by Bl4de.... it's as quiet as a mouse. Tweaked the hammer spring tension and use H&N FTT... run mine at 590fps, a spread of 5fps and std dev of 2.1fps. Shoots sub 20mm groups out to 35 yards. Mine's a keeper 👍🏻😂 Great channel 👍🏻

@hftshooter 7 ай бұрын

You probably bought yours in the same sale I did. Certainly lends itself to some tinkering. I think mine could do with a bit more power. All the best! 🙂👍

@Josef_R 7 ай бұрын

I like how you have to look down the barrel to see the pressure gauge. Safety 101...

@hftshooter 7 ай бұрын

That is unfortunately the case in many cheaper rifles. However, if you've checked the rifle is unloaded, not cocked and the safety is engaged! 🙂

@Josef_R 7 ай бұрын

@hftshooter Not blaming you for anything, just pointing out a stupid design that can lead to stupid behavior. It violates the first rule of firearms, never point it at anything you don't wish to kill.

@markhomer5704 7 ай бұрын

Enjoyed that vid.. Probably needs an heavier hammer spring to get it that wee bit more power.. Nevertheless it's accurate enough..

@tahirsaeed949 2 ай бұрын

which scope??

@hftshooter 2 ай бұрын

That is a Vector Optics Cerato C3 3-9x32

@chrisjohn4101 4 ай бұрын

This gun performs best at 200bar, the REG is of a basic design and does not like full pressure, treated correctly these will match any PCP on the market below £1k.

@hftshooter 4 ай бұрын

Yes, definitely a good performing bullpup. 🙂👍