48v Aventon eBike Battery Wake up Hack for DIY bike builds

[@frankdrebin1791]

I bought this for my aventon level and it didn’t work at first (plug and play). It did take a charge. I did some testing and noticed the larger black wire wasn’t completing the circuit. I spliced all the black wires together and it appears to be working now. I just bought another R4 and it worked straight out of the box. Now I have 3 working batteries for my bike!!! Thank you for supplying these!

[@jondavidmcnabb]

Heck these are a deal just for people that have Aventon 48V ebikes!!! Dude that is a great price.

[@rubenescobedo5054]

Do you have a phone number where I can reach me at

[@teadott]

Thats great, Some batteries use odb protocol.

[@PolskiDangles]

I bought this battery from Jag35 (along with some others I use). Needed the male connector for it. Hard to find. Aliexpress has the connector for $40 bucks with key. Waiting on delivery. Do not know if it will have wires attached.... Aventon sold me the discharge connector with wires attached for $10.99. Just received it. The two positives have a small wire connecting them together. Positive Main has a JST connector to NegativeB (middle negative). I am pretty sure it is for charging since the 4 pin connector blocks the barrel plug charge port when mounted. Hope this helps. Recap. Positive and negative have 14g wires. Small wire connects both positives. Small wire from Main Positive (on the end) goes to a 2pin JST connector. Another small wire from secondary negative (middle-one) goes to same connector in the other pin slot.

[@chaserchaserspeedracer]

Ive done this with multiple bird scooter batteries. All left for dead. Despise the company/s for not taking any responsibility for the trash they leave in every major city in America.. could of saved lives in Texas and all over the world with all that power they left for pollution in landfills,waterways etc. .thanks for showing an example of a renewable energy solution source for anyone in need.

[@jovsd.i.yprojects]

Very informative video sir j.garcia

[@onjofilms]

Glad it turned out to be simple dimple.

[@mackpowerev1092]

Hey Jehu, great content ...thanks

[@mackpowerev1092]

Pls how can i reach you..?

[@mofig]

I have an Aventon eBike that these batteries are designed for, so took the risk and purchased one. It was most definitely not new, with scuffs and a bit of dirt on the battery. It also does not work in the bike, or with the stock charger. The charger just turns green instantly, and in the bike the screen either won't turn on or just flashes low batt for half a second. Doing the trick in this video let me verify that the battery does have actual voltage (54.1v) and let me both charge and discharge the battery. I think either the BMS is bad or it is in protection mode for a reason, and connecting the wires this way is bypassing it. So maybe good for salvaging cells, but don't plan on using this in a bike as is.

[@PolskiDangles]

Do you know the name of the 4 blade connector? My battery charged just fine on the barrel plug connector. I have no way of knowing how to find this connector. Thanks!

[@mofig]

@@PolskiDangles No, sorry. Haven't seen a connector like this before.

[@PolskiDangles]

@@mofig Thanks. Will report if I find something and try to help the group out.

[@allensilberman7882]

Where can I buy a second battery for my first generation Aventon Pace 500 ebike?

[@scott-jc5nd]

Good ideas, but your delivery could be a little slower when you plug things in. If your hands are over the wires and the wires are black and the battery is black, it's hard to follow if you're not somebody who does this all the time. Just my thoughts. I know this was done a couple of years ago. Thanks

[@Smnewsnetcom]

These batteries fit the Aventon Level bike for those wondering.

[@brentyoung7655]

Is this the batteries that fit on the old v1 or the new V2 terminals

[@alexbonilla4262]

I’m wondering the same thing because I bought one from the Aventon doesn’t work because I have v1 and the battery is the v2 Doesn’t work on my bike without replacing a chip that connects the battery

[@egidio6david0]

Question about charging I'm new. Just received my battery it looks beautiful! Thank you.i watched your video on how to make the BMS work.. I want to charge it so I just jump out those wires and start charging?

[@natedheilly8499]

So it seems you can do this hack with hooking A to the positive and B to the negative but it seems if you leave them connected like that it kills the battery over night so I would recommend making it like he did with the double connector so you can unhook the B and A wires. So it doesn't kill battery overnight. Might just be mine but it's happened twice now charged to full rode the bike for 10 miles recharged for a few hours then unhooked and left over night battery dead. Charged battery for 5 hours till 80% rode bike around just fine then left over night again hooked up and battery dead again in the morning.

[@XiaolinDraconis]

For those in the future, the likely issue here is a vampire cell, more than one if it drains that fast.

[@AnthonyTorres-hu5uw]

Is there any available

[@wil2j72]

Can i just cut this open and replace the BMS then insulate and shrink-wrap?

[@chrispycriter6682]

great stuff, change the ?? how to wake up an ALLPOWERS solar generator ?when charging it shows HELLO and full power,then it shuts down and will not power up

[@laguintasuarez6601]

Good Job

[@samuelcrosby7675]

Hi I own an Aventon Aventure and I have 2 of there batteries. Do you have any ideas how I could use both at the same time?

[@familybusiness1417]

There's a guy selling a battery "balancer" that allows you to run 2 battery set up. Search for Aventon dual battery setup and you will see his videos...He has a step by step video

[@lloydrmc]

The ebike page on your web site is looking pretty - um - sparse nowadays. Any new stock on the horizon?

[@csleeut]

Just bought 4 R4 unused. I plan to use then 4P1S as battery for hybrid solar charger battery bank. Is there any reason that is not a good idea?

[@Captdba]

Great info. I have a couple of Giant EnergyPak 36v 500wh with a 5 pin connector. Do you (or anyone of your followers) know how to wake the battery pack? I can't find any info on the interweb. Thanks.

[@Shmade0304]

Thank you 🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🔋🔋🔋🔋🔋👑👑

[@MarkSmith-oz9md]

Im sure Im late to the party but do you still have batteries available for Aventon? 48v

[@lizardzman]

Jehu, you seem to always answer my questions. So here is one for you. Is will call available when I purchase an item? I am not that far away from Ontario, and I like to save on shipping, also don't have to worry about postal laws in California.

[@jehugarcia]

Yes my staff does a few will call orders a week but you’ll have arrange it with them at [e-mail]

[@DavidSchruedner]

Do you have Aventon Adventure batteries for sale? If so , do you have a website to buy one?

[@jehugarcia]

all gone

[@61Lei]

Hi any chance you know which is negative and possitive that I need to jump, on 6 pin PLA 0238 aventon battery

[@agbajetoheeb1049]

I love your work bro.... can i get some... i live in Nigeria

[@charliemak5975]

could these connect to the megadongle to make a powerwall?

[@joenah5651]

How would you mount it on your bike, any ideas? I put two holes ont the front plastic gard and screwed it on the water cage screw hole, but it's not the the most secure way.

[@PolskiDangles]

I found an Alibaba seller that has the connector and lock and key. It's not an entire single piece mount but the ends have metal that would normally attach to inside of the frame. I will build a mount for my dual motor Rad Runner I am building.

[@anupwitu]

@@PolskiDangles Can you share the Alibaba link? Were you able to make it work?

[@puntorojo123]

question if my bms is damaged can i charge the battery from the bottom conexions

[@barrelracer318]

Hello. Do you happen to know if the site you listed can get the battery packs for the Aventon soltera 7 ebike? Its a 36v battery I think.

[@hollywheaton1332]

I’m new to this channel. What do you do with all these batteries! Besides the bikes.

[@DatGuy960]

Anything you want. Did you hear the remark about solar panels? They can charge these batteries, which are portable, leaving their uses to your imagination.👍

[@mitchmotorsports1]

How do you order batteries from you.

[@jehugarcia]

Jag35.com

[@mariopic]

got the round 6 pin version how do i wake it up

[@markveenstra702]

Euhh don,t you bypass the Bms in this way when you charge it ?

[@csleeut]

How do I charge these batteries with a say 100W 12V solar panel?

[@BeezyKing99]

may be a great hack, but that's also a VERY great way to kill a Li-Po pack real quick BMS protects against over-discharge, while this hack allows you to BYPASS the BMS entirely, which takes away your protection from over-discharge/current situations..... think carefully before doing that on a Li-Po pack... would you wanna run the risk?

[@Toaster808]

The BMS is inside the battery's case. This hack doesn't bypass the BMS, it simply turns it on so it can do its job. Think of it like turning on the ignition switch to your car.

[@mofig]

@@Toaster808 I have the aventon bike that this battery is designed for. I got one of these batteries and it will not work in the bike (screen flashes low batt and turns off immediately). Also the stock Aventon charger won't charge it, just goes green instantly. Doing as shown in this video lets me discharge and charge the battery, so it's definitely bypassing something.

[@BeezyKing99]

@@mofig that *something* is the BMS

[@egidio6david0]

Hey what voltage do I charge this thing to when I first get it. Anybody?

[@kennethwilder5550]

I need a battery

[@mikestalbaum6183]

Hi out there, I have one of these R4 battery packs and I hooked it up to a ebike. It works great and has lots of power but it seems unable to accept a charge. Wondering if there are any suggestions out there. Thanks

[@FHDesert]

The internal fuse is blown. I blew mine several times. VERY easy fix. Let me know if you still need to fix it.

[@justinschuchat3650]

Anyone know where to get a battery bracket that fits the 52v version. I think Jehu calls it the R1

[@toddpeeples3793]

This is I know a weird question for you but I do not know any other way to contact anybody on your website about it . When trying to order these batteries on your website there is a problem can you please tell me how I can order them. 50 pack PINYOU INR18650 2500 mAh NMC cells ( 3C max discharge) - Sriko Batteries

[@charlesboston1]

how do i buy a couple ? i'm in canada

[@jehugarcia]

Usa only sorry.

[@JohnDoe-nq4du]

How much do these batteries weigh?

[@ronnietatum4627]

Hello out there

[@AlfredoSanchez-vi4um]

I need to buy a battery

[@jamesandhoa]

Hello would anyone know the weight of the R3 Series - 556Wh Mid Power 48v 11.6Ah

[@Swannking]

I'm not an electronic engineer or bms expert. It seems to me that when you are connecting the negative and the B terminal next to it, you are bypassing the discharge protection of the bms. The B terminal is wired to C- of the bms and tied in with the negative of the charging port. So now, your discharge current is not running through P- of the bms where it was supposed to but running through C- and therefore bypassing the discharge protection of the bms. ie LVP, OCP and short circuit protection. I hope I am wrong about this. Besides, I bet you don't have to jump the positive and the A terminal but just the B and the negative to be able to discharge the battery.

[@jehugarcia]

Do you have pictures of the internal bms that shows where these wires connect to?

[@Swannking]

I do have pictures of the gutted BMS but I was not able to post photos in KZbin. I posted them on the face back page about this battery.

[@ecaparts]

I’m not sure about that. I don’t think there is any safety concerns here. Batteries over a certain voltage and WH, must disconnect the outputs for transportation purposes. The Ebike connection that this battery is intended for, just makes the said connections when inserted to the Ebike socket. Internally the cells are always connected to the BMS, there is no BMS bypassing going on.

[@Swannking]

@@ecaparts you can believe whatever you like. The battery cells are indeed connected to the BMS by the B-. The output to P- and then to the load is controlled by the MOSFETs and circuitry with different discharge protection. The cells voltage/current will be cut off to P- when there is any issues that trigger the MOSFETs to shut off . Same with the charging side of the circuit aka C-.

[@PolskiDangles]

what is the fb page, like to see the pics...Thanks!

[@hulkhogan6259]

It seems like he has 10 batteries for sale.....by the time this video posts....its sold out. seems super fast! I wanted to buy a cpl....already gone 2 hrs after the video posted. :/

[@hitmanhite]

Lol, so true. I think he said he had a whopping 50. Bet went out to 1 or 2 folks.

[@cmsjr123]

@@hitmanhite Thats not actually true. Their page udpates in real time. And it was decreasing by like 2-3 every few minutes. So its multiple people buying them. They also put a few of these on the 2x config as well. Its not 1 or 2 people buying these items. lol

[@hitmanhite]

@@cmsjr123 Well if they go back up, I will take 30, lol.

[@kjm-ch7jc]

DIY alterations to lithium batteries are only putting your safety and others at risk. A battery pack on fire isn't very nice.

[@billkaroly]

I want to convert my recumbent trike to electric.

[@My_travels911]

These batteries are garbage! Don't buy one unless you are prepared to have a $175 brick that you have to tear apart and modify it in order to use it for anything.

[@ummsalempalestine8523]

My children need food and live in a rented house, please 🇵🇸

[@tdomingues89]

Why are you on internet when your kids are starving, that makes zero sense.

[@mustafa-wy1tm]

@@tdomingues89 Internet access does not mean that there is money and food

[@mustafa-wy1tm]

اذا ما شفتي الرقم احكيلي لاعطيكي اياه

[@awesomehigames]

@@tdomingues89 Probably on an Obama phone from the food stamps office