4D Carbon Fiber Vinyl Install on Pillars

[@budakota]

Of ALL DIY You Tube Videos Of How To Install Carbon Fiber Vinyl To Car Door Pillars ..Your Step By Step Video Is The Ultimate Best By Far!!!.....In My Opinion..Thank You Sooo Much For Uploading!!

[@DaveMedicus]

Wow, thanks! I am glad that I could help you. Good luck with your projects.

[@GOOSEAF]

This was a very nicely done, and informative video. I will definitely use your tips when I install this. Thanks.

[@DaveMedicus]

Thanks for watching. I hope that it helps.

[@Engineerboy100]

Good job on the carbon fiber tape. I may be doing one soon after watching a few more videos and using all of you guys great techniques ;) Thanks for posting.

[@DaveMedicus]

You are welcome. Thanks for watching.

[@balesjo]

Really enjoyed your video. I have a 2005 Ford Taurus sedan on which the side pillars look really weathered and vinal sprays/creams haven't done the trick. The wrap improves the appearance 1000%

[@DaveMedicus]

Thanks for watching. I am glad that it helped.

[@MrBigsky13]

Well done! Most informative trim wrap video I have seen. A+

[@DaveMedicus]

Pat Gentry thanks Pat

[@spdfrdm]

well done!! gave me courage, confidence and motivation to save a buck and do it myself!!!

[@DaveMedicus]

Thanks man. This was actually my first project as well. Have fun with your project. Thanks for watching.

[@nutrock87]

Just a little tip, dont rub the squeegee up and down, go in one direction only. i.e, from top to bottom and lift the tool off the vinyl and start again. Saves air bubbles being pushed around.

[@DaveMedicus]

Thanks

[@jbee1fam]

What are you trimming the edges with?? Are you cutting into the paintjob???

[@DaveMedicus]

No I wasn't cutting into the paint because there was a lip I was cutting against. I never had any wrap actually touching the paint. Very simple process on my vehicle. Thanks for watching!

[@oddsandwindsocks5905]

Nicely done mate, I done mine last week on my Audi.

[@DaveMedicus]

Thanks. How did it come out?

[@oddsandwindsocks5905]

@@DaveMedicus very impressed with results, superb look at only 18 pounds. I was lucky enough to be able to remove the pillars and sand them and stick the carbon on away from the car ,

[@robertbrown4262]

Looks really good. I am getting ready to do the pillars on my kia soul. I am going to do my pillars in piano black. You have me a lot of helpful information. To do under the moldings use a tucking tool.

[@DaveMedicus]

Go for it! Thanks for watching and good luck on your Kia.

[@Mahad921]

Awesome job Dave..... Really enjoyed it, will surely try that on my Rexy. Cheers mate!

[@DaveMedicus]

Thank you. I am glad that you enjoyed it. I hope that it helps. A helpful tip that I could out is that smaller surfaces are a little harder to start out on. The pillars were perfect for starting.

[@ChryslerPTCruiser]

really appreciate the level of detail in this video! using the magnets is really smart. I'm guessing the temperatures you're stating are in farenheit? maybe I misheard but 70F doesn't seem all that warm to me

[@DaveMedicus]

It was 70 outside temp.

[@aaronwatson1062]

It looks nice with the wrap

[@DaveMedicus]

Thanks!

[@josemoran3902]

thanks for the idea my car was neglected by its previous owner as well and this will help it look better

[@DaveMedicus]

+Jose Moran I am glad that this will help you. Good luck with your project.

[@michaelfrascati7610]

Nice job! Very professional, Definitely want to try this. 👍👍

[@DaveMedicus]

Thanks for watching. Good luck with your project

[@likeitis5662]

Nice work dude, doing the blue on my Yaris now haha

[@DaveMedicus]

Thank You. Good luck with your project. Thanks for watching

[@MyCatInABox]

This turned out really well. Makes me believe that I can do it to my car.

[@DaveMedicus]

MyCatInABox it was very easy. There was almost no learning curve.

[@erterrill]

Great DIY video. Waaaaay better than most on Tube!!! Thanks. Going to do this with my Audi A4

[@DaveMedicus]

Thanks man. Hope that it works out well for you.

[@jesusreyes4787]

Woo thanks for this video this guy as pro great job 😊

[@DaveMedicus]

Thanks for watching.

[@chynabarnescb]

That was enough to do both sides🤦🏾‍♀️👍 awesome job!

[@DaveMedicus]

Chyna Barnes I probably had 3 time as much left over I can’t remember but I believe I bought a 4x5 piece. Thanks for watching.

[@logan5326]

Man...that looks hot. Good job bro!!!

[@DaveMedicus]

Thanks. I hope that this gives you some good ideas for your projects. If its your first time start small. Do not over complicate things with complex shapes.

[@logan5326]

@ DM....very true indeed my friend! I'll keep it straight and simple at first....thanks again bro.

[@DaveMedicus]

Not a problem.

[@mariopizano3888]

Where can I get the blow dryer?

[@DaveMedicus]

This heat gun was from Lowe’s.

[@enfield7123]

I am thinking of doing the same to my vauxhall mokka but will wach your video' a couple of times before I have ago 👍

[@DaveMedicus]

This was honestly my first attempt at it. Just take your time. Its not too bad on small simple items. Thanks for watching!

[@latrachejamal1343]

Nice job! Will follow the same steps.

[@DaveMedicus]

Thanks for watching, I hope that it helped you.

[@totom5095]

Good job, nicely explained 👍

[@DaveMedicus]

Thank you 🙂

[@jovtecxtv1321]

I never thought of this before. thanks 👍👍

[@DaveMedicus]

No problem I hope that this helps.

[@rockydevil736]

It looks nice but everything in this world has its own life. When it is peeled off after long time to change with another one , does it have bad impact on the door pillars?

[@DaveMedicus]

I had no issues when I peeled mine off. Actually my pillars looked amazing and I didn't have to put anything back on them.

[@thebest9618]

I have done it on my bmw series 7 and its looks great and now im doing it on bmw i8

[@DaveMedicus]

+Hamza_RJi Now you are making me jealous. I actually sold my Alpine White 2005 645Ci before I moved out to Arizona to learn how to fly helicopters. That was my favorite car that I have ever owned with the exception of the constant oil leaks that I had to fix. I am glad that this video helped you.

[@thebest9618]

Dave Medicus no bro honestly i was joking 😩 i dont have them they are my dreams.. but i only havr bmw 320d e46 😔

[@Thunderbyrd.]

Patterns line up good, nice work

[@DaveMedicus]

Thank you

[@yh72119]

Thank you for the clear instructions. I am going to try it on my honda.

[@DaveMedicus]

No problem. I hope that it helps. Good luck on your project. Thanks for watching.

[@mr.tuckers2848]

Nice job thanks- better than buying an entire ready-made kit. I'm looking at wrapping the ugly brown trim pieces in my 2014 Honda Accord Sedan.

[@DaveMedicus]

Thanks. It wasn't very hard to do and you will also have more room for error. Those kits are cut almost exact. If you are the slightest bit off you will have to buy a new set. This is a much easier and safer way to do it.

[@mr.tuckers2848]

Do you have any recommendations as to where I can find this material online? I saw a few dealers on Ebay and one of them is selling a 12" x 60" roll for about $6.00. Not 3M brand but a clone of it I suppose. I also heard it's easy to remove in case you no longer like the look and it leaves no sticky residue behind. Is this true? Thanks!!

[@DaveMedicus]

Yes it is super easy to remove. I would try to get a good quality vinyl because it will give you better results. I believe my stuff total was like $40 will tools included. Just do a google search for automotive vinyl.

[@mr.tuckers2848]

Dave Medicus Thanks again for your help!!

[@DaveMedicus]

Not a problem

[@akshaysobti2186]

Great work :) I do have a question. What if the Carbon Fiber Vinyl is not sticky enough? Is their any glue or something that can be applied that won't damage the paint or leave any residue if the Vinyl is removed?

[@DaveMedicus]

+akshay sobs You can try to apply heat to the vinyl to melt the glue already on the material and try it. Other than that if its not sticky I would not even attempt to use it. There is some glue that would hold the edges but that won't help you if the material is bad.

[@MediaTruth_]

Thanks Dave, for sharing, appreciated.

[@DaveMedicus]

Very welcome. Thanks for watching.

[@serdargr3456]

nice catch :) you could use snap blade knife for cutting too

[@DaveMedicus]

I had one but I liked the control I had with the blade.

[@supergreekaros]

Nice work 👍👍

[@DaveMedicus]

Thanks 👍

[@armstrongbe]

You said you cut more vinyl than you needed for the front door pillar, but you could have done both door pillars in one hit.

[@DaveMedicus]

iamMrBiggs I would not have been able to wrap around the inside of the door and make it look right if I did the, both together. The trim went around the inside pretty far. I believe I showed it farther back in the video.

[@willyhermosura3341]

Nice one bro.

[@DaveMedicus]

Thank you! Thanks for watching.

[@ThornEternal]

Heating the vinyl up makes cutting harder. If it conforms and stretches cutting isn’t as easy as when it’s stiff. It’s like paper pretty stiff you can hold it in one hand and cute through real easy. Good finished product thought looks great!

[@DaveMedicus]

On mine heating it up softened the material making it easier to cut.

[@robertorudzhyan7799]

the heater gun is more Important?

[@DaveMedicus]

Thanks for watching!

[@mopar3009]

That shit looks nice Bro, good job and thanks for the idea

[@DaveMedicus]

Thanks man. I would use 3m vinyl the stuff that I sued was cheap but did not hold up to the conditions in Arizona.

[@mopar3009]

I'll keep that in mind, I wanna do a lot of carbon fiber wrap in my 300, thinking of doing wheels also

[@DaveMedicus]

Angles are hard but for a beginner I would try to stick with more of the flatter/slightly curved pieces. I have a few other videos where I did the interior handles I would watch if I were you. This was actually my first project with vinyl. Good luck and let me know how things go.

[@mygt8a4re]

I know this vid is pretty old but I'm curious how this vinyl holds up on the exterior? Is there a way to protect it?

[@DaveMedicus]

I kept it on for about 4 years it held up great. I would put wax on it to help protect it from the Arizona sun. I still have the vinyl on the interior of my car so it holds up

[@mygt8a4re]

@@DaveMedicus good to hear, appreciate the response!

[@DaveMedicus]

@@mygt8a4re no problem. Thanks for watching

[@msalman5462]

honestly it came out great ♥

[@DaveMedicus]

Thank You

[@normaaustin5817]

You did an amazing job.

[@DaveMedicus]

Thank you. I hope that it helped.

[@garydeandeery]

Iv started a film dipping company so trying to see if any different looks from the wrap and film dipping

[@DaveMedicus]

Never heard of that before. Like Hydro dipping?

[@garydeandeery]

I did mine 4 years ago and still look good but now doing more bits so I'm doing them again

[@DaveMedicus]

I’m glad that they are holding up

[@predpalina]

Do you have a video tutorial for doing the hood?

[@DaveMedicus]

Kit Anilapde no I never did the hood. It would not be that difficult it uses the same principals.

[@raydavies3278]

Anyone know how smooth a plastic panel needs to be for vinyls to stick ?? . For example the dark grey panels on many cars have a light molded pattern on the surface ( so not to be shiny and smooth ) as on tops of interior door panels on a HYUNDAI or a KIA where your elbow would rest.

[@DaveMedicus]

Usually will conform to those small surface changes well. Gloss patters will show more mistakes or that texture. If you are using a textured vinyl you should be fine in my opinion.

[@raydavies3278]

@@DaveMedicus Thanks ,what about the glue, will it be sticky enough ?

[@DaveMedicus]

@@raydavies3278 If you use good quality vinyl it will be fine.

[@Plainpotato99]

Question. Are the process of wrapping the same when wrapping plastic interiors?

[@DaveMedicus]

Allan Cabibihan yes. You just may have more angles to deal with.

[@CJoefarhat]

Great little tutorial very informative 👍 I know this was years ago, wondering how long would these vinyl last? I'm plan on doing a chrome delete & thinking whether to vinyl rap or paint. Thanks

[@DaveMedicus]

I kept it on for 3 years but you can keep them on for way longer. I’ve see people easily get 6 years out of it. I had a decal on my truck hood for the 8 years that I owned it. It just gets a little harder to pull off because it gets brittle with age. I’m talking about when under force.

[@janmabalot3704]

How will it remove the vinul without damage your cat tnx

[@anthonymcguigan1963]

great video help alot to fit vinyl on my car many thanks

[@DaveMedicus]

Thank you I am glad that I was able to help you out. Remember to share and subscribe for more current videos.

[@akbarbukhari]

what is the hp increase ?

[@DaveMedicus]

Man like 8-10hp easy. lol For me I was just glad I didn't have to deal with the discoloration of the pillars. Funny enough when I took it off 4 years later the pillars looked like new. I haven't had to put anything on there since.

[@angel_h303]

Great work loved it helped alot thanks

[@DaveMedicus]

Glad it helped. Thanks for watching

[@mathw2703]

What about round curves objects, this is the easy part..?

[@DaveMedicus]

I was a beginner when I did this. Make sure that you get good quality material is step one. There have been a lot of new techniques lately. I don't have the experience to give you an exact answer on this one. I would try to search for the exact thing you want to cover. Thanks for watching!

[@Kratkymethod]

Cool used it for my growroom thanks

[@DaveMedicus]

I’m glad it helped. Thanks for watching.

[@4gunner]

Holy crap that looks good! I can't wait to do this on my 4Runner that I just got. Idiot before me chipped the pillars up bad. I might have to put some body filler on it first so that it doesn't show through the vinyl.

[@DaveMedicus]

Use a good wrap brand. The one I used didn't last very long and I have to redo it. The adhesive on the back didn't hold and was lifting and expanding in the middle. I would use like a 3m or better product

[@4gunner]

Dave Medicus Yeah Amazon has some pretty sweet deals on rolls from 3M. Thanks man!

[@BabyFresh2.0]

Great video babyboy!! now I have a 2019 kia forte and I m trying to add some to the rear sides because they said they didn't make chrome but then I thought about adding the carbon instead but do u think that I can get the carbon for this type of car,let a brother know and thanks!!

[@DaveMedicus]

You can get carbon for any vehicle. You would just need to cut it yourself.

[@BabyFresh2.0]

@@DaveMedicus thanks!! babyboy,one more thing does it come off when you wash your car.

[@Plainpotato99]

Thank you for making this video.

[@DaveMedicus]

No problem I hope that it helped.

[@limabeemer3447]

Where is the link for these???

[@DaveMedicus]

Should be in the description. You can purchase any vinyl you want for that. This specific one was from metro restyling. Thanks for watching

[@terryreyes1125]

Doesnt vinyl get descoloration with the sun also?

[@DaveMedicus]

Yes over time. This is why you want to buy a quality vinyl. Many companies will give you a life span estimate when in the sun.

[@joemontella9056]

what's the best way to remove the existing peeling 4D Carbon Fiber Vinyl on Pillars ?

[@DaveMedicus]

Are you referring to the stock vinyl? They sell plastic razor blade scrapers on amazon if you cant get them off by hand.

[@lmedina4731]

That look pretty good, thx for the vid

[@DaveMedicus]

Thanks for watching.

[@handduggraverdronline]

Looks great. I've never applied vinyl to a car and was wondering how long does it before you can trim it? Or does it stick once you hit it with heat gun.

[@DaveMedicus]

You can trim it immediately. This video was actually my first time so you can do it too. the heat gun is only needed if you have to stretch the material. If you have to stretch it a lot there are some good videos on youtube with tricks when using a heat gun.

[@basirurahim3370]

he man good job. How much was the 4D vinyl wrap ?

[@DaveMedicus]

Basiru Rahim it was only like $7 for a 1'x5' piece

[@logan5326]

Dave Medicus...how you doing my friend? By the way, how did it hold on your Ford Focus?Cheers.

[@DaveMedicus]

Logan I am doing great. The vinyl wrap worked great. I kept it on for about 2 1/2 years before I took it off. All of the edges held up great. The adhesive was not very strong on the cheap material I used so I would recommend 3m or Oracle. I plan on doing it again with a different style material just for fun.

[@logan5326]

Great! I hope you upload a new tutorial video then....looking forwards bro...cheers!

[@haygood9]

Looks good bro

[@DaveMedicus]

Thanks for watching. I appreciate it

[@jimmikatt]

Looks nice, thinking about doing this to preserve my pillars, they are starting to get a little dull. Where do you find this type of CF vinyl ?

[@DaveMedicus]

I bought mine at www.metrorestyling.com I would try to use 3m for a better product

[@hsmplantationcampus9589]

Good video! Where did you get your vinyl from?

[@DaveMedicus]

www.metrorestyling.com

[@GraaY94]

Gonna try this on my car! My door pillars have a grey vinyl on them stock, but some of it has came off showing the red paint underneath!

[@DaveMedicus]

Let me know how they come out. Make sure that its clean and anything should be better than what you have.

[@GraaY94]

Yeah I'll rub with alcohol and wipe it down

[@markvelcro5144]

great job and excellent video....4 thumbs up

[@DaveMedicus]

Thanks. I hope that this video helped you

[@alexwhite8572]

What website did you get the wrap from?

[@DaveMedicus]

I used metrorestyling 4d carbon fiber. If you google that their products will pop up. I do not get paid by them I am just informing you of what product I used. Thanks for watching.

[@alexwhite8572]

Ok thx

[@MrTopGunnar]

do you need a heat gun or will a hair drier work?

[@DaveMedicus]

A hair drier will work on smaller parts. It will take you longer to heat it up but it does work.

[@aquicktake]

Appreciate the effort - but never understood the logic of applying CF on that particular area. I mean it would far be better to use a satin or gloss black than CF. Portraying the idea that CF is there - that your pillars are made of CF (in a key structural reinforcement area of the vehicle) is a bit ridiculous don't you think? Faux CF on the roof or hood I could reconcile - but not on pillars.

[@DaveMedicus]

It was different and a style that I liked. Toyota actually used carbon fiber vinyl on their pillars from the factory.

[@supercooled]

How did these hold up? I bought some off Amazon and they were cheap as well so likely they're the same 'cheap crap' you used.

[@DaveMedicus]

Mine actually made it 2 years in the Arizona heat. The finish was still awesome on it but the material had stretched from the heat.

[@tejindersingh6665]

👍 good job

[@DaveMedicus]

Thank you!!! Thanks for watching.

[@kimchijiji6490]

Can it last long? You're applying it not in a chrome, body paint or glass

[@DaveMedicus]

Oh yeah. I kept it on for almost 3 years. I actually put some on my cell phone and its still holding strong.

[@flatearthcrypto6991]

watching a box opening of a heat gun 🤣🤣🤣🤣🤣🤣man we all need to get lives hahahahah. 80’s are missed. lol

[@DaveMedicus]

flatearth crypto yes they are. Lol

[@Fumble]

How well do these wraps hold up to weather?

[@DaveMedicus]

They hold up great. I lived in Arizona so I had to deal with 110+ heat in the summer and then snow in the winter. As long as you don't dig into them with like an ice scraper they are fine. Rocks can mess them up just like it would your paint job.

[@balesjo]

@@DaveMedicus That was the answer I was looking for. I live in southwest Arkansas where summers outside are getting really hot. This was my main concern.

[@jrjr4u]

How does it stand up to touchless car washes?

[@DaveMedicus]

***** It stands up fine to touchless car washes. However I will say that this product didn't hold up to my expectations. I would pay the extra money and use a 3m or better product. It works well inside but I have to redo the exterior because the vinyl actually expanded and now doesn't sit correctly. Its really annoying because if anything I expected it to shrink.

[@DaveMedicus]

+D0tam4n You only want to heat where you are going to stretch the material. If I heated the whole material the pattern would be incorrect. You don't see videos where people heat every inch of the vinyl when wrapping a whole car. This stuff was like $7 for a 5 foot section its adhesive was really cheap and I live in AZ so it got hot and would not stick well. The 3m I used worked perfectly and was a much higher quality material.

[@allanmottus2646]

Nice job! Thanks for help!

[@DaveMedicus]

Thank you

[@anadcolz4762]

Very nice

[@DaveMedicus]

ANAD Colz thanks

[@whiskeyindejar]

Thanks for helpful video..much appreciated.

[@DaveMedicus]

No problem. I am glad that it helped

[@mysticman0628]

Nice job thank you for shared with us.

[@DaveMedicus]

No problem I am glad that you enjoyed it, and hope that it helps you in the future.

[@DaveMedicus]

***** Thank you

[@caingheodeocaikho]

*****

[@DaveMedicus]

Thank you I am glad that you enjoyed it

[@djorbitz]

bravo..really good work...but it seems so hard doing it..

[@DaveMedicus]

+GR81 This was actually my first time doing it thats why. Once I got to the other side is was super easy. It will be the same for you if they are simple pieces to cover like this. I have 2 other vinyl videos and you can see that it got much easier. Thanks for watching.

[@AJsWorld]

Looks great!

[@DaveMedicus]

Thanks for watching

[@pixelrangerstudio86]

dont u cut through the clear coat????

[@DaveMedicus]

No not with this. The pillars are made of metal and have a large edge. On my vehicle it’s very easy to cut the vinyl without even touching the paint. When I and working on the inside of the door it’s easier to see what I am talking about.

[@pixelrangerstudio86]

@@DaveMedicus thanks for your reply ❤️

[@martinholta6637]

Does a 2000w hairdryer work?

[@DaveMedicus]

Yes' it will work. You won't have as much control over the heat but if you are careful and patient it will do the job. Thanks for watching

[@alighajari3727]

very good

[@DaveMedicus]

Thank you

[@BobbyDD21]

I'm looking to put a replacement OEM vinyl over the original in a similar way for my driver door. The tape has no problem sticking over the original one (obviously as long as you clean it, like you showed)?

[@DaveMedicus]

Thanks for watching

[@romanf5666]

4D? I am waiting for 5 or 6D...

[@DaveMedicus]

haha

[@MrHaider444]

nice catch and nice job

[@DaveMedicus]

+Haider Jaber Thanks for watching. Hope that this helped.

[@cpnstbn1266]

How much does a decent heat gun cost.

[@DaveMedicus]

You can buy some from Harbor freight for like $15 I bought this one for about $60. You can buy an average one for around $30. I have a video going over the one that I used in this video. Just look for my videos. Thanks for watching.

[@souravde970]

can't we apply vinyl without heating?

[@DaveMedicus]

Yes you can apply most of it without heat. You may have issues on some curves or getting the material to form to the part that you are sticking it on. If you do not have a heat gun you can always use a hair dryer.

[@coreylongenecker2288]

i thought that the pillar looked fine after he cleaned it with alcohol, it was just some smudges from the oils on his hands. but it does look good with the wrap too.

[@DaveMedicus]

+Corey Longenecker In the video it did look good when I wiped off all of the dust, but in person it was a totally different story. It is a faded black. Watch around 1:50 when I open the door at how hazy the shine is. Thanks for watching.

[@sebasapereira]

how real does the 4d carbon fiber vinyl look compared to real carbon fiber?

[@DaveMedicus]

+Seba Supreme From far away its hard to tell but if you are within 10 feet you can tell its different. It still looks really good but you not the same. Put it this way if its the look you are going for it will meet that but you will not fool anyone by saying that its real. The thumb nail picture is this vinyl in the sun there was nothing special done to the picture. If you wax or clear coat it it will look bad.

[@sebasapereira]

Dave Medicus Thanks for your input, I might do it to see how it looks, it could always be undone!

[@DaveMedicus]

Seba Supreme Yes it can. I am thinking of possibly doing another video using 5D carbon fiber to see how that would look

[@nileshtemil8545]

how to apply if we got windshield on the pillars ?

[@DaveMedicus]

What type of vehicle so that I can try to visualize it. Without looking at it specifically you can vinyl up to the window cut and tuck it behind it so that its not visual from the outside. I am sorry if this doesn't help you because I don't know your specific vehicle. just let me know.

[@nileshtemil8545]

Dave Medicus Mazda 3 2005 Sir .. i am actually trying to do it ...your video was so accurate and encouraging...can you suggest me another solvent other than the alcohol..

[@DamienNicholas]

would it look real if u put some clear resin over it? like surfboard resin or something? or even some clear coat? it just doesn't have the "pop" that real carbon fiber twill does.

[@luisf.b7517]

there is 5D carbon fiber now.. just installed it on my 5 series Bmw.. and it does have the sheen and everything like real carbon fiber does. it's even glossy so no need for clearcoat.

[@DaveMedicus]

+Damien Nicholas I put wax on mine once and it took away the 4d look. I would just buy the 4d or the 5d like luis said.

[@DaveMedicus]

+Luis F. B What brand 5D did you go with? Do you have any pictures or videos? I am interested now. I might have to redo mine lol

[@CesarRodriguez-vc4ys]

where can I buy the vinyl??

[@DaveMedicus]

I bought mine from www.metrorestyling.com

[@cbr-entreprise9089]

y a t il un risque d'avoir une déformation des ligne de carbone lors de la pose?

[@DaveMedicus]

Non tant que vous n'utilisez pas trop de chaleur. Même avec la chaleur, je n'ai pas remarqué de problèmes.

[@cbr-entreprise9089]

Dave Medicus ok ien a un qui fait le toit d'un voiture orange et les alignements sont déformés. J en suis resté étonné.

[@DaveMedicus]

Ils doivent avoir utilisé un vinyle vraiment bon marché pour faire leur travail. De plus, s'ils ont durci l'installation, ils peuvent se déformer. J'essaierais d'utiliser le moins de chaleur possible. Des erreurs se produisent. Merci d'avoir regardé.

[@chrismeadows5948]

That looks really nice on that orange . I wonder if it would look as nice on my dark grey Jetta . my pillars are looking ruff to . ☑

[@DaveMedicus]

It should look really nice. When the sun hits it will really shine

[@joeg.1119]

Dave Medicus now you need window tint it looks bad a$$

[@PaganWizard]

You don't have to get carbon fiber vinyl wrap. The vinyl wrap is available in many different colors and finishes. Look on eBay and Amazon to see all of your options, many sellers will also offer a small piece of wrap for just a few dollars so you can see how it looks in person. I bought a sample from 1 dealer, it looked great on the internet, but looked like crap in person.

[@darienbryan]

how abt directions to do window visors with the carbon vinyl i would love to see how thts done

[@DaveMedicus]

+Darien Bryan The vinyl won't work in the visors in this vehicle because of them being padded. What you would want to to is create an overlap in the vinyl and then make one cut for the two pieces. This will give you a perfect matching line even if your cut isn't perfect. typically you will make the cut on the sides.

[@darienbryan]

Oh ok cool thanks a lot I'll try tht