How to Take Apart a PCM ECM Connector Plug 4.8L 5.3L 6.0L LS1

[@WiringRescue]

Thank You for Watching the Ratty Lemans Build! Subscribe To This KZbin Channel: kzbin.info See My Wiring Playlist: kzbin.info/aero/PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh

[@clintc4148]

Only thing that needs to be done is remove the colored terminal covered like you did and the grey back cover like you did.. no removing the washer, built or other studd... removing the other stuff is absolutely unnecessary.

[@WiringRescue]

Good info! Thanks for the tip!

[@bigbcool2505]

Very helpful! Couldn't find another similar vid

[@WiringRescue]

Excellent! I’m glad it helped you out!

[@joshhammond231]

Great info bro I got water in mine and disintegrated the pins I have to replace 17 of them

[@WiringRescue]

That's rough! Good luck with the fix.

[@christopherH402]

Awesome video. I needed to know how to do this safely. Thanks a lot

[@WiringRescue]

I'm happy the video was able to help you out!

[@28704joe]

NOOOO !!!!!!!!!!! Consider doing it as follows: 1) Remove grey back cover by unsnapping it and straightening cut wires behind it 2) Remove Blue pin covers 3) Grab metal tube crimped ends with needle nose pliers and just pull wire right out of connector BOOM you're done.....