4Runner AVS Install!! DO I LIKE IT?? Goodbye Rocks and Bugs!!

Get it here: amzn.to/3fmrrAf
In this video I install the AVS (Auto Ventshade 23071) on my Toyota 4Runner. This was a super easy install and took me about 5 mins. I hope this video was helpful!
➢ Help us reach 25,000 subs! / bluetrdjon
➢ Follow Me On Instagram: / trd.jon
➢ Car Mods/What I Film With: www.amazon.com/shop/bluetrdjon
➢ Send Business Info To: [e-mail]
-----------------------------------
DISCOUNTS!!
PEDAL COMMANDER 10% = TRDJ10
www.pedalcommander.com/?rfsn=...
ACCESSORIDES $15 OFF = TRDJON
accessorides.com
TUFSKINZ 10% OFF = blueTRDjon
www.tufskinz.com/
TACTILIAN 20% OFF = BLUETRD20
carflagmagnet.com/
DRZ OFF ROAD 15% OFF = BLUETRDJON
drzoffroad.com
LASFIT LED LIGHTS 10% OFF = blue_trd_jon10
lddy.no/h1m7
_____________________________________________________________________________
Amazon associate links AND other affiliate links allow me to produce more content for you all. It also allows you to get ideas of future upgrades you may want to have! Thank you for your support.
BUSINESS INQUIRES/FAN FEATURE FRIDAY EMAIL: [e-mail]
The Copyright Laws of the United States recognizes a “fair use” of copyrighted content. Section 107 of the U.S. Copyright Act states:
“Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
This video may contain certain copyrighted works but which we believe in good faith are protected by law and the fair use doctrine.
#avs #4runner #trdjon #offroad #overland #autoventshade

[@Wild1995]

So freaking cool the 4runner hood already has the holes for the bug shield

[@schollsnsocks]

Lots of Pros and Cons here !! I just installed the same hood deflector on my 4 Runner just to deflect stones and debris up away from the hood and mostly away from the windshield.I’m on the Highway frequently and don’t need chips Etc...One of my main concerns was that there was enough space between the hood and deflector when I wash the vehicle that I could clean the space between the two,most other deflectors lay right on the hood edge.There is a good amount of space,and I think the deflector looks good on my Silver 4 Runner and my deflector came right out of the box,no scuffs or scratches !!

[@jasons7175]

Looks good Jon! That's one of the first mods I did, plus the window rain guards on all the doors. I also removed the logo sticker 😅

[@suzay21]

Looks good. I bought the Toyota brand when I first got my 4runner. It isn't glossy anymore but it serves its purpose. I got this because I've learned my lesson with my Tacomas with cracked windshields. Granted it's not a 4runner but it's worth it for piece of mind.

[@CP-kb1du]

One of the 1st accessories mods to do when buying a new rig ..

[@JayTdub13]

I put these on all my vehicles. Saves the paint. Little down grade in appearance but it’s worth it.

[@jamesmcmillian9492]

Easiest install of bug/rock guard I've ever had. Just a few tiny scratches here and there. They could have fit 5 more of them in the giant box it was shipped in. They really need to put packing material in the box.

[@djohnson0753]

I put one on my 5th Gen Midnight blue metallic after watching this it looks great!

[@travcurt]

Awesome man! Just got my 2022 4runner TRD Off Road yesterday and looking to put window and hood guards on. Gunna go with this one once I confirm theyll fit the 2022 model.

[@rjatesblogs6855]

do they fit the 2022???

[@duckadiesel4182]

This is my kind of mod, thanks for sharing

[@taylorlowinger1206]

Jon I must say that I think Donut Operator would be proud of your stache.

[@misterpimlott6330]

Love the look, just gives it another look, also that roof rack is great looking

[@TRDJon]

Thanks man!

[@jsb773]

You can probably buff out the scratches using a headlight restore compound or fine auto body compound.

[@patricklawrence2755]

thanks for the vid...i think ill drop one onto my 2014

[@retromouseshenanigan2980]

Thanks dude, you’re truck looks sharp. Thanks for the video. I chip windshields like a champ.

[@TRDJon]

No problem 👍

[@veronicaserrato9827]

Hi, Jon I just got mine yesterday install and it looks beautiful. Thank you

[@samuelagaga4365]

Where did you get it?

[@TRDJon]

Link should be in description

[@15jody]

Great job bro .

[@lewisdunn8169]

Tried the avs brand on my 2020....unfortunately it did not fit right. There was not quite enough clearance...with the hood closed, it made contact with the trim across the top of the grill. I was afraid it would rub away the paint over time....so be sure to check clearance and make sure you can slide a thick piece of paper (business card) between the deflector and front grill surround. It did look go though on my white pro, with the contrast. Went with a clear bra.

[@scottstewart8737]

I just bought the high profile. It goes out a few more inches on each side

[@jamesfarrell4195]

I love my AVS Bug Shield. I got the AeroSkin version though. I run a body shop so I went and painted mine to match the body. It looks seamless. AVS makes a great product!

[@hatrian83]

How do you like thr aero version? I’m afraid to put all that double sided tape on the paint.

[@jamesfarrell4195]

@@hatrian83 I love it. Trust me, the double faced tape won’t hurt your clear coat finish at all! As long as you didn’t just have it painted within the last 90 days, don’t be afraid of the double faced tape. I recommend waiting 90 days if your hood has recently been refinished though. There are plenty of videos on here showing how to install it, it’s super easy once you have it lined up. I would absolutely recommend getting it painted to match the body, it looks seamless. It shouldn’t cost you more than $100 to paint it as long as you don’t have the white pearl color, then it would likely be just over $100.

[@egdallis]

Sick vid... just bought one.. thanks bro

[@slipi4648]

Nice addition to the 4runner, I can’t wait for that 4th gen giveaway.

[@TRDJon]

Thanks!! Can’t wait to drop it!

[@VanillaGorilla502]

I used some clear hot glue looking for when I ran one of these on a Trailblazer SS.

[@1800Beatdown]

Just bought one for my 2014. This is the only vehicle that actually looks good with a bug deflector

[@RCGJR_]

VHT night shade tint spray (meant for headlights, tail lights) but when i got my AVS from amazon they had some scuff marks as well, this spray did the trick.

[@TRDJon]

Thanks!!

[@Winterfell1066]

You can always use some rubbing compound to take the scratches. out.

[@Str8Bidness]

Dremel and a buffing and polishing wheel on those scratches.

[@jasonwigginsbanzai9412]

Dated! You make the Entune 2.0 look like a keeper now :) Looks good bro!

[@TRDJon]

Thanks! 👍

[@americanmade422]

I've had my avs bug deflector for a few years along with the window rain guards. No issues

[@TRDJon]

Great to hear!

[@michelemurphy9007]

Same. Went on after the window tint.

[@tonyz2551]

Does the water when washing it stay in between the deflector and the hood? Won’t that mess up the paint job in the future as the water sits in there? I feel like once you decide to take off the deflector you’ll be able to see the thin line of water that stayed there.

[@jan3019]

When i got mine it's all scratches too :/ but i installed it cos the problem is the packaging itseft from the factory

[@jannyLOML]

is the bug deflector working well? saving the windshield from stone chips?

[@corradettimotorsports360]

I like it, too bad on the scratches, but it is what it is. After watching this video I am now going to hunt one out for my TRD Pro Tacoma!

[@TRDJon]

All good man! Hope all is well!

[@White_buffalo_4r]

so what about a long term review of this and if it's helped reduce the bugs and rocks

[@11BruceCWA74]

Purchased from AVS and received the item damaged. It's been two months dealing with support and still no ETA for replacement. Like many have stated, quality is definitely an issue, too bad I didn't listen to advice of others before I purchased.

[@chewminem2044]

Got the bug deflector 2 and after installing it wont shut my hood

[@ralphscott5901]

Jon I messed around with my iPad a bit and hit on the title of the video, which looked like regular type not like a hyperlink, and up popped the info. Sorry to bother you with this. Guess an iPad is a little different. Thanks again brother. Love your work!

[@TRDJon]

No worries!! Yeah all these devices and standard website it seems that things are in a different place on every single one. Thank you!

[@yotaman492]

OK, I get the problem that you are trying to solve. But why not just put on a PPF package? Yes, a PPF will be more costly, but look wayyyyyy better without that deflector. Thoughts?

[@christophermartinez5314]

Great installation

[@TRDJon]

Thanks man

[@4RunnerSteve]

hey john, suggestions on your next install. ever looked into the arb differential breather kit? curious to know about your input on it

[@TRDJon]

Yes and I need to do it

[@luisgalea6960]

Where did you buy it, brother?

[@MontyPiper]

you could probably polish out those scratches. Or, Paint /Plastidip it in a matte black finish would look nice

[@TRDJon]

I definitely can. Just annoying it came with them.

[@wilmermenendezz1972]

Thanks nice video

[@Bt26x]

Definitely a mandatory mod of mine when first purchasing a rig. I have been thinking about getting the newer model that is basically a skin for the hood. Does anybody else have one of those? If so, how do you like it?

[@CarnutMM]

I haven’t tried it but I don’t like that you have to stick it on your paint. Seems like if you remove it later it will ruin your paint.

[@elchen011]

My hood won't close any suggestions?

[@ericnexplore]

Thanks for the vid. Cheers

[@TRDJon]

Hope it helped if you’re interested. Thanks!

[@ericnexplore]

@@TRDJon Will definety get one. Got my 2017 4Runner last month. In Canada apparently we like to litter the roads with sand rocks and salt during the winter. That will be a nice protection. Have you seen this AVS bug deflector? www.amazon.ca/dp/B086PDNBT1/?coliid=I1HQMG0VMI0SUJ&colid=BZPG5Z59QVVN&psc=1&ref_=lv_ov_lig_dp_it

[@davidwethington9320]

I've had the scratch issue with AVS products almost every time.

[@TRDJon]

Seems like their quality control is trash then

[@doolitz101]

Thank you!

[@TRDJon]

You're welcome!

[@rjatesblogs6855]

will this fit a 2022???

[@VK_Moudgalya]

Jon~ I installed the exact piece on my 2023 4runner. Though I followed all the steps and installed it, I see that this is not even on the hood, I say that because when I view it from the drivers seat, the passenger side is little low VS the driver's side, should I worry about that? Do I need to re-install, because when I was installing it, the passenger side holes were not exactly aligned with the ventshade holes? Just curious? please let me know your thoughts. Thanks. I am happy to share pictures if you want to see post installation? Thanks - VK😊✌

[@SrsLe33]

Mine is the same way, thought i was crazy , it must be a manufacturing thing.

[@TheRspct2all]

$43.30, not bad. Thanks Jon

[@veronicaserrato9827]

Hi I have a question I just can’t find any raptor lights that will go with my 2021 Toyota forerunner I did buy some at Amazon and they did not work I see that my grill is different than yours you put them on the top I have nowhere to put on top so I try to put them on the bottom and they just didn’t work any ideas thank you for your time and thank you for the sweet videos I enjoy them all the time.

[@TRDJon]

I havent seen any for the grilles with the silver bar.

[@veronicaserrato9827]

@@TRDJon thank you I knew I couldn’t find any I was afraid of that it OK if you say something down the road I will fit my 2021 Toyota forerunner please let me know thank you very much for your channel Jon I enjoy it you have a good one.

[@lucky-rowe2623]

Did you put the clear bumper things on the outside of your hood? And if not has the shield been rubbing the top of the hood?

[@TRDJon]

I haven't noticed any paint damage thus far

[@4runnergravy]

I have the toyota brand one which I was told no long being made for 4runners. But its pretty much the same.

[@TRDJon]

Curious if they just supplied it to Toyota

[@andrewcrane3489]

The deflector that the dealer (Crestmont Toyota NJ) installed on my 19 Pro had TOYOTA embossed in it. It also had metal mounting clips that wrap around the front edge of the hood and subsequently, with wind vibration, started to dig into the paint! 😤 As with your Amazon AVS, I tried returning it three months later, and it was out of the return window (60 Days). And the dealer also didn’t want anything to do with repairing the paint damage that THEIR part, that THEY installed, did to my truck! TOYOTA “Customer Service” is a JOKE! After you drive off the lot it’s 🖕🏻

[@jeremytaylor9213]

@@andrewcrane3489 My dealer installed strips of clear film on the paint under the metal clips to help with this situation. I don't know how long it holds up before it abrades through to the paint. I don't like the look of the deflector so removed and had the whole hood and fenders wrapped in Xpel film.

[@andrewcrane3489]

@@jeremytaylor9213 I was happy to just throw that POS Toyota deflector in the garbage. I too went with the Xpel but because I like the look of the Xpel Stealth which has a Matt finish, I ended up wrapping the whole truck. I actually do like the aesthetics of the deflector though, so I went with the AVS. But as Jon experienced, it came scratched up so I had it sprayed with Linex bed liner. Now it’s bulletproof and it looks awesome!

[@4runnergravy]

@@andrewcrane3489 my Toyota defldctor came with clear strips for the metal. Been on a year and no issues. It does look good on a 4runner.

[@OverlandPNW]

looks great. In fact, think I'll look into getting one.

[@nashgamalinda5383]

Hey, so i just installed avs bug deflector on my 4runner too but after installing, it won’t latch on. Did you do any adjustments? Or you just push the hood down hard?

[@TRDJon]

Like the hood wont latch? Make sure nothing is in the way. I didn't have an issue.

[@777AOG]

Just recently put an AVS on my 2021 4Runner and it was actually chipping the paint when closing, not sure if it was a dud. Possibly others are experiencing this as well, I ended up taking it off because of this.,

[@TRDJon]

Did you put the rubber knobs down?

[@777AOG]

@@TRDJon Hi Jon, I did put the rubber guards on, the issue was not with the hood being chipped it was the painted trim piece above the mesh grill, the underside of the AVS was hitting the right side when shutting the hood, the spacing or gap didn’t look even, I took it off a couple of times and remounted although no change, probably just got a bad unit.

[@airup1275]

Any issues with your bug deflector rubbing the paint on top of the grill?

[@TRDJon]

None that I have noticed

[@froto93]

Now you've got me reconsidering getting one for my 4Runner... I had a deflector on my old vehicle and it (over several years)rubbed the paint through on a few places on the vehicle, even with the rubber stops on the hood. The retention clips also were falling off from sun rot when I sold the vehicle.. and lastly, there was a line on the paint where the color had faded less due to being covered by the deflector. Again, all over several years (likely close to 20, actually). But, the vehicle was stone chip free on the front of the hood! Now that I'm picking a few up on the 4Runner, I want to ask- do you think this particular brand stands much of a chance of rubbing through the paint in any spots over time? Would like to hear what you think there; because every time I find a new chip it stings a bit!

[@TRDJon]

It is close it some spots. So I’m going to keep an eye on it for sure. It is better than rock chips like you said. I have a good amount of wax on my car too and sealant so hopefully it helps from fading over time.

[@froto93]

@@TRDJon it would be awesome to have an update on any rubbing after a month or two installed! I'd think you'd be able to see any rubbing pretty quick. Good point on the wax/sealant though.

[@CarnutMM]

Was thinking the same

[@xu88]

@@froto93 When the hood is closed,it do rubbing the paint,not the paint on the hood,but on top of the bumper,underneath the hood.

[@munafsamji7715]

Hey what kind of headlights did you mod? Are they bright enough?

[@TRDJon]

Alpharex. Check out my video on them

[@tacoma_jon]

I actually like the look

[@TRDJon]

Thanks man! It’s growing on me

[@micahinnis9235]

Meguiars Plasti-X will take all those light scuffs out easy. Simple wipe with a microfiber towel.

[@TRDJon]

Thanks!

[@KINGJUANMARO]

will this fit on a 2021? Great vid

[@TRDJon]

Yep

[@bartcanuck734]

Not worried about the deflector vibrating over time and scarring the paint on edge of the hood?

[@TRDJon]

No there are rubber tabs

[@4bvenom733]

That AVS logo gonna come off in few days like mine if you don't double size tape it

[@TRDJon]

I took it off myself for a blacker look

[@paulbenderavich3833]

Had this bug shield on my wife's 2015 4runner, and now it's on her 2019. Cheap, easy install and functional. Try Plexus to clean and polish the scratches.

[@TRDJon]

Will try that!

[@christophermartinez5314]

👍👍👍👍👍

[@jhbryaniv]

Lol you said you have an off road vehicle. Don't you know you have a mall crawler. ROFL J/K nice quick video!

[@TRDJon]

The beauty of a 4runner is it’s both haha

[@ralphscott5901]

Jon which model number Avs did you get? I do not want a tape on model but one that attaches as you demonstrated in your video. Also was yours smoke or black as my 2020 is white, premium, and needs a little something to set off the front end appearance

[@TRDJon]

The link is in the video description to the exact one unless Amazon changed it

[@ralphscott5901]

Jon I cannot find it in the video description where do I look?

[@ralphscott5901]

Jon, Scotty Kilmer has his item links directly below the video. Is this where you put yours?

[@TRDJon]

It’s directly under the video.

[@brianelliott6438]

Awesome! Will it work on 2020?

[@TRDJon]

Yes

[@mauricioibarra701]

I bought my 15 4Runner with a deflector already on, I took it off right away. Not a fan of them at all.

[@noctilucent7396]

Same no eyebrow for me

[@walterporras9233]

What about a front leather bug protector for long trips?? Ideas??

[@TRDJon]

I don;'t like those at all personally

[@walterporras9233]

@@TRDJon awesome content like always bud!! What can you recommend to protect the front bumper on long trips?thanks!!

[@TRDJon]

A great wax for bugs. But a clear bra will be best

[@heyitschinoable]

What is that TRD sticker underneath the hood?

[@TRDJon]

It’s for the TRD I take

[@ThatOtherDave]

It's gonna get beat up on your truck anyway, I wouldn't really worry about some scratches. Doesn't deflect much, after 3 years with mine I'm pretty sure stuff just hits slightly higher up my windshield. 😆. Bought it mainly to protect the front edge of my hood.

[@TRDJon]

Exactly

[@LoneMango100]

Will this fit the 2021 off road premium?

[@TRDJon]

yes

[@PreCiiSiioN_II]

Have you had any issues with it rubbing and scratching the paint?

[@TRDJon]

Not that I have noticed

[@PreCiiSiioN_II]

@@TRDJon Perfect, thanks!

[@MotoVet86]

FYI for anyone new to this video. My avs deflector was sitting on top of the front grille fascia which will run. I’m returning it

[@mayphotovideodbamarkajames7845]

Does it fits: 2020 4Runners too?

[@TRDJon]

yes

[@mayphotovideodbamarkajames7845]

@@TRDJon Thanks Buddy

[@BigBlueTalk]

How come you didn’t buy the toyota oem one ?

[@TRDJon]

basically looks the same and OEM is WAYYYYY more

[@marcusaurelius652]

Gotta change that outdo music

[@TRDJon]

why?

[@ea8454]

Weathertech may be a bit better choice.

[@TRDJon]

Maybe. I just didn’t like how low it was. Or round. I can’t remember now actually.

[@snafumagu]

Clear bra, man. Expensive, but worth the unincombered look.

[@CarnutMM]

I knew a guy who had a clear bra on his Camry hood. Ran half way up the hood. Years later it started discoloring and when he removed it, the adhesive stayed on his paint. Maybe it’s different now but was enough for me to never do it.

[@snafumagu]

@@CarnutMM got it on two vehicles. No issues over the years.

[@ORG4Runna]

Looks cleaner without it.

[@TRDJon]

It is for sure

[@racer3212]

Not a fan of the Unibrow.

[@andyham6094]

That Anthony Davis 4runner mod

[@bassage13]

I almost bought one of these, but I read so much stuff about how these don't actually work at all. There seems to be two sides to the argument. I have no idea what to believe.

[@CP-kb1du]

Read so much stuff about how these don't actually work at all , Bet there are multiple scratches dings on your vehicle no argument there huh .....

[@bassage13]

@@CP-kb1du Not a a single scratch or ding on the hood or windshield. Been off roading 90% of the time and highway driving 10% of the time in the desert for two years. Plenty of pinstripes from rough trails, but nothing on the hood or windshield.

[@CalebKerr]

My 2 cents is that I don't like these. I think they really diminish the nice looking shape of the front end. It seems like it really doesn't provide that much real world protection. I'd personally rather have a few rock chips in the front edge of my hood than a huge black plastic guard. It reminds me of when old ladies cover a couch in plastic or bed sheets to keep it nice. But, I know I might be in the minority here, this is definitely a very popular mod.

[@Hi.Im.Levi.]

Who disliked this lol

[@TRDJon]

So early too....

[@bassage13]

Jeepers.

[@sha6mm]

Will cut your MPG.

[@TRDJon]

Oh no!!!! Haha