4Runner TRD Pro Grille Install

[@rmnorton2]

Thanks for the video. Before you attach the letters, drill a small pilot hole where each little indent is on the trim piece (2 per letter). After you press the letters on, flip it over and you can put a small drop of cyanoacrylate glue into the holes. It will seep into the hole and make the bond between letter and trim piece. I also used tiny flat head screws to affix each letter from the back. The screw head sticks up less than the 3M tape, so it does not cause any issues with fit. I think with the glue and screw plus tape the letters will stay on.

[@jagdeeprandhawa4361]

Thanks for the great video!! For me, 4 lower out of those 6 plastic tabs just wont pop out. Inserting the flat head part of a screw driver does lift them up but they refuse to pop out, all 4 of them. Fear I will end up breaking them if I pull on them too hard. Any suggestions?

[@GregMonroy]

Just installed one, but the tape on the black plastic cover came apart after only a couple of hrs. now it's being held in place only on one side. When I find the time, I will have to add more double-sided tape to make it stay in place. Not as seamless as it seems on the video.

[@AP24673]

I saw you guys don’t sell the lettering (TOYOTA) with the kit.. why?

[@superjepoy]

I have a 2023 4runner. When i was installing i notice that the upper grill (you provided) doesnt fit my radiator bracket and upper bumper. Emailed customer service. Waiting for response.

[@steeldesignNW]

@1:21 I had the same problem. I could not re attach the bracket. I have a 2020 SR5

[@fouronesevenfly]

i have a 23 i got it for and raptor lights. looking to see how the best way to do it is. but thanks for sharing i'll be following

[@zyft02]

Same thing for my 2022 Off Road Premium. This stuff is junk!

[@kevinwinters8381]

None of the holes match up well they match up however they don’t reach down to where the holes originally are you have to use a longer screw if you have one I just took my whole grill apart to put that thing on and it was nothing but parts that didn’t work together it is not made for a Toyota SR5. I believe it’s probably made for the Trd pro models or the off-road models not sure but it’s definitely not working for a 2022 SR5 premium.

[@im_smert2348]

best video explaining the process

[@leoluu1644]

Hi thanks for sharing, another question would u tell what wheels brand and tire size please, appreciated 😊

[@legobossk5344]

Does the grille come with attachable letters ?

[@ryanbaker8623]

What if you are trying to replace stock silver letters with another color. how do stock letters come off?

[@4runnerlifestyle]

There's some adhesive that holds them in place, if you heat it up slightly you should be able to just pick them off and replace them

[@caihuang137]

Not as easy as it looks. Things just don’t line up perfectly. The curvature of the center bar doesn’t snap into place and will pop up on either sides leaving a huge gap! I have a 2020 off road premium. Also the raptor lights don’t work with the 2020s either

[@Pwnashi]

Did you end up returning it?

[@4runnerlifestyle]

sorry to hear you're having these issues, I can assure you that the grilles do fit pretty seamlessly and the raptor lights do work on all models

[@ranlan9060]

@@4runnerlifestyle hey guys does this fit the limited trim? also still waiting on the overlays to be re stocked :D

[@codygreene9067]

I know this comment is two years old. I had the same issue and had to lean on either side of the center bar of the grill to get it to adhere.

[@caihuang137]

I had to drill two screws on the bottom of the grill bar to keep the ends from peeling and popping out

[@TheAmick218]

Will they ever be back in stock?

[@JoshuaKinne-re4ho]

I just got mine and my order was missing the letters that were supposed to be with it, plus the grille piece the lettering goes on is way too short. Customer service is impossible to get a hold of too. I’m disappointed I spent 200 dollars for something that isn’t even right as well as missing parts that I purchased with it

[@Draino2110]

If you still respond to comment or if someone could help me out, he has a green tan and white stripe on the top piece of his grill, what is that and how do I get one in the red yellow and orange colors

[@Nfarer]

eBay

[@4runnerlifestyle]

Heres one of the decals I beleive the one you're looking for www.4runnerlifestyle.com/products/taco-vinyl-universal-grille-decals?_pos=8&_sid=895bded08&_ss=r

[@metuselahjones6905]

Buy genuine Toyota and no issues w alignment. 🤷🏻‍♂️ Sometimes price is justified

[@MrBill99]

wish you had used white lettering to see easier. looks good!

[@ironhaas503]

Can you order it with different words other than "toyota"?

[@capitalistwire]

Why is this grille not compatible with the 2019 Limited? Looks great.

[@jp71889]

You need the lower bumper as well

[@Ellvminati]

Mine came with no lettering and no double sided tape inside the center bar

[@treyperoutka7900]

The upper mesh part on the left side doesn’t want to click into place any idea on what this would be

[@shneebledorf]

I just purchased this, and mine didn't come with the Toyota lettering at all

[@bradtaylor9640]

Will this work on a 2023 4R TRD Off Road ?

[@robertbritton8084]

what is the difference at your store between the 2020-2022 and the 2014-2019 grill?, I taught there was no difference

[@4runnerlifestyle]

The angles are just slightly different, the upper mesh piece isn't quite the same so the earlier year version wont fit the newer 4runners.

[@cs-ls4vg]

@@4runnerlifestyle when will you have more 2020-2022s in stock?

[@4runnerlifestyle]

@@cs-ls4vg They're pretty backed up at the moment but we're working on them pretty hard, it'll likely be a couple months.

[@sir-namenlos3098]

Will the Heritage grille be made available for 2020+ models? I'd love to get it for my 2022 TRD ORP

[@codygreene9067]

Those little plastic clips that hold the plastic grill apron on are the shittiest pieces of hardware ever. Pretty much all of mine broke putting them back in. My 4Runner is six years old so they had become brittle I guess.

[@parkersmith4574]

can i have the link to those halogen blinker lights??? please

[@superdave4543]

Doesn't work for 2022 TRD offroad. The center bracket is different than pictured and doesn't fit with your grill. Your new grill doesn't fit the painted portion. Only fits on the outer edges.

[@4runnerlifestyle]

you are correct in saying the grille used in this video will not fit the 2022's however we do have a grille specifically made for the new 2022 models. If there's any issues please reach out to [e-mail]

[@regularguy7517]

@@4runnerlifestyle It doesn't appear that any of the 2022 models are in stock? Maybe I'm just not seeing it, great vid regardless, looks like a very simple install.

[@4runnerlifestyle]

@@regularguy7517 Those should be back in stock within the week is our goal.

[@regularguy7517]

@@4runnerlifestyle Nice!

[@finger8588]

@@4runnerlifestyle is there extra wiring we need to take care of for the 22 trd off road swap out? or basically the same method as you showed us in the video?

[@godlike0630]

hows the quality on these?..close to OEM?..or one of those cheapy chinese knock offs?.

[@teachthestory]

Doesn't fit a 2021 well at all. Just pay OEM and enjoy it. Not worth 200$. Trying to get a refund.

[@noctilucent7396]

Are the OEM ones made in Japan?

[@andyguo6700]

Where did you get those decals

[@4runnerlifestyle]

www.4runnerlifestyle.com/search?type=article%2Cpage%2Cproduct&q=decals*

[@TheRealAMR-]

The tss plate helps with the left/right alignment gap issue.

[@michaelyoung1337]

I really don't like how you have to tape the letters on Why aren't they permanently attached? What happens if you lose a letter???

[@se7515]

Then you drive a YOTA

[@Lalo_Runs]

@@se7515 nice haha

[@team1perfection]

Don’t waste your money on this product. You’re going to have to paint the grill yourself, and the grill isn’t deburred properly. Also there’s creases on the grill and it doesn’t look OEM.

[@YoMomma1337]

This! I just tried to install it and it doesn’t fit. All of the holes doesn’t align well and I ended up breaking one of the four clips at the top of the grill. Don’t waste your money, bruh I’m so fuckin pissed right now I’ll just spend the $600-$700 and get the OEM grill.

[@jayman3573]

@@YoMomma1337exactly! I ended up spending more money trying to correct the part. I would of saved my money and time if I went with OEM. It’s all good though because I am the type of customer that will never return to your company. Fool me once but you’re not going to fool me twice

[@TheKingalexander10]

Whats the OEM grill and how do i get one? It looks like this? ​@YoMomma1337

[@TheKingalexander10]

​@jayman3573 is OEM a brand? New here lol. Also where do I get the one you suggest?

[@toddmenard2330]

Good to know!

[@Putters1215]

What year is this runner?

[@kaseywaller6116]

has anyone gotten this to work on a limited? I am trying to change the grill on my 2018 limited but im thinking i may have to change the bumper as well..

[@4runnerlifestyle]

We're not aware of a way to do that just yet.

[@kevinduong9317]

Will this fit on the new 2022 4Runner sr5 premium?

[@4runnerlifestyle]

Yes, when you go to order just make sure to select the 2022 variant. If there's any issues please reach out to [e-mail]

[@eatdirtnetwork]

I don't need the top part... Do you guys sell only the middle part?

[@4runnerlifestyle]

email us at [e-mail] and we will get you taken care of.

[@eatdirtnetwork]

@@4runnerlifestyle I did. Waiting to hear back

[@jeffhenjes1722]

Wipe it down with a rag? How about clean it with some isopropyl alcohol (15%) and water (85%)

[@jmarie41507]

My letters didn’t come with the 3 mm tape on the back of them. I was wondering why? Also I was wondering why don’t the letters already come assembled?

[@RCGJR_]

If you want to spend $500+ for the oem from the dealers go right ahead, even the OEM ones are made in china.

[@brodygreen3367]

@@RCGJR_ i work at a dealership and the oem ones come the same way, not pre attached

[@Lalo_Runs]

@@brodygreen3367 should we go Oem or aftermarket? Is the Oem quality far more superior?

[@EdgarAllanGo]

@@brodygreen3367you haven’t answered the question the people want to know!

[@quantumdecoherence1289]

I wanted to get this for my 22 TRD OR but glad I saw this video. Seems like a pain in the ass and to have to stick on the letters?

[@Lalo_Runs]

Are you going with the Toyota Oem?

[@AQUARYOUS]

Toyota is charging me $1900 for the trd pro grill .. is this how much it is or am I being charged a lot more than what it’s worth?

[@kota11334]

Yes. That's alot. I'm looking proooauto for the trd pro grill aftermarket. Comes with the letters. I emailed them to see if there are holes or something to line up the lettering, so it won't come out crooked. They also have the raptor lights. For around $155.

[@ksi7425]

Would this work for 2014 sr5? If not do you know anyway or thing to do something similar

[@4runnerlifestyle]

Yes it will! if for any reason you have any issues (which isn't likely these are pretty universal and thats a model thats covered) you can always reach our support team :)

[@fatelook]

How do I install the lights that you can order with the kit?

[@4runnerlifestyle]

They click into the grill unless its the 3 light set which uses a screw :)

[@jonathanmariani5627]

I have a 360 degree camera would this interfere with it

[@CompleteHavocLLC]

Nope, mine on a 2024 TRDOR installed without issues.

[@TheNish18]

@@CompleteHavocLLC I have a 2024 TRDOR with the sensor on the front did you have any issues with that? The big block.

[@g.fortin3228]

Last two letters looked closer together than rest for sure. are the T's nibs on the back slightly different like the O's ??

[@4runnerlifestyle]

The nibs on the grille do line up in a specific order meaning the first T in Toyota fits in the first location and will cause issues if used as the second T. If there's any issues please reach out to [e-mail]

[@mikepringle3275]

Where did you get the logo matching tape?

[@boostleesf]

Do you have a video on the aiden James bezel lights?

[@4runnerlifestyle]

Working on one!

[@jp71889]

kzbin.info/www/bejne/mnrWZWqZrbymkLc

[@scottlittleford]

Open the package before you start to take your old parts off your truck, mine came scratched.

[@adriandevora4090]

great video !!!!!

[@j.davis891]

Where did u gdt the decals

[@4runnerlifestyle]

www.4runnerlifestyle.com/search?type=article%2Cpage%2Cproduct&q=decals*

[@shannonsmith4127]

Does anyone know what the wheel Set up is on this 4Runner?!

[@4runnerlifestyle]

To be honest we don't recall what wheels where on this one at the time but the tires are 33's

[@Mjr1348]

I like it !!!!!

[@DavidBrown-um1ly]

Will it fit the 22 TRD sport?

[@4runnerlifestyle]

This exact model shown in the video no but we do have the new 2022 grille's on our website www.4runnerlifestyle.com

[@topshelf30]

do you have it in stock?

[@4runnerlifestyle]

Yes we do

[@Travelguy1]

Do NOT buy this product!!! It doesn’t fit. The holes do not align properly. Trying to help a fellow owner out over here.

[@dakc7849]

I didn't even get the holes on mine or the lettering.

[@TheShooter466]

Do not buy from this company, this shit is so cheap. The cover doesn't even have holes for the letters anymore, and the letters are cheap garbage.

[@timbohtv]

Goddamn it the emblem section wont pop off with the rest….so stupid.

[@fatelook]

How do I install the lights that you can order with the kit?

[@markgiese9175]

They have a separate video dedicated to the light install. Read Comments if you have a newer 4runner as the fuse to plug into is different just FYI

[@DigiCube0]

Where did you get the Green tri-color decal?

[@King3JSR5]

Amazon