4th Gen Seat Swap in the Megacab Cummins 3rd Gen Dodge! *tow rig mods*

[@TristynRusselo]

Seat Swap part of video starts at 6:35

[@leeroot9897]

You’re a humble dude. Even though you’re a KZbinr and are not rich nor poor but you’re living comfortable I’m sure your tip to the tech just proved that! Keep pushing the good content buddy

[@jaywest4102]

Coming soon: I bought a new Duramax

[@lucasa4891]

Ford*

[@garrettmonk8432]

When you say it's because it's a Dodge when everything that's wrong was aftermarket or broken when you bought it

[@upbeatsnow_tk294]

Still a dodge

[@jamesdiaz2748]

But it still broke in someone else’s possession. Why because it’s a dodge. I’m a big cummins fan just not a dodge fan

[@williamstru2119]

Aftermarket because dodge stuff failed and aftermarket is half the price and just as reliable

[@SMD-si7fm]

garrett man I’m sayin. It doesn’t matter what the tow rating is, if you tow with it, no matter the vehicle, things are going to wear out faster. You cant expect Factory to last forever, especially if you’re towing with it on the regular. If you’re going to by a “tow rig” be prepared to pay for s built transmission. It’s a lot of $$ but it’s worth it.

[@Taylordrifts]

@@garrettmonk8432 It has a built trans. My point is, this particular truck has been nothing but problems. I like the truck, so I'm going to keep fixing it. I just hope it gives me a break at somepoint. And idk why people complain about the IFS on a chevy. I put 30,000 on mine without a single problem.

[@NaxRydan]

I for one, am LOVING the narrated Timelapse!

[@Taylordrifts]

Thanks! I like doing it over adding music because you can actually tell what's going on.

[@cecilfrench2238]

Dont know if you read the comments but love the attitude about things going wrong and putting the bad on the channel as well as good enjoy watching bud

[@spunk97100]

Should’ve never got rid of the duramax

[@Taylordrifts]

I do miss it, but I still believe it wouldn't have pulled this trailer very well. it was short wheelbase where this truck is a longwheel base chassis plus being a 3500 it has stiffer rear leafs, already has a built trans, and intake, tuner, exhaust. It just needs to stop breaking random stuff all the time. lol

[@spunk97100]

Taylor Ray they both have their pros and cons I think with a few mods to the duramax you could’ve pulled whatever you want wherever you wanted but I do agree on why you got the dodge as far as having a gooseneck hitch and built trans, I think it’s more the quality of the duramax compared to the dodge that made it stand out

[@mtotheizatt]

Goon Garage 321 that duramax was so damn clean

[@ddevil4980]

3:10 Damn Taylor! Looks like you motor boated a dirt monster!

[@Taylordrifts]

It was a rough day. lol

[@ddevil4980]

@@Taylordrifts forsure brother!

[@BBBoiko2004]

You have to vacuum the carpet before the install of the seats.

[@Mopargocar]

Did you try to use your old jump seat on the new brackets? I got 2010 seats from a local yard for my 07 and didn't know at the time that I needed the jump seat as well. If I knew whether they match up I'll just get brackets...

[@RAbrams64]

Still waiting on the turbo C10 build

[@toro220d]

3rd Gen. Dodgers of the easiest vehicles I have ever worked on I have the 07 Mega cab at it's been nothing but a joy to work on the seat pad I got on Amazon for 50 bucks put it on and 15 minutes without taking the seat Out And they are the best looking Trucks outside of a 1979 Ford

[@jarrettblakemore4676]

Nbs chevy is for sure easier

[@chrisbmx68]

I highly recommend picking up a bissell portable spot carpet cleaner they are sub $100 and they are perfect for cleaning vehicle interiors

[@williamstru2119]

Chris Conti yup. Great machine for the price

[@Erics_Edge]

Thanks for the video. Im doing the same swap in my 06 quad cab. Your video is helpful.

[@adamsquires2]

U need to talk to Greg a on KZbin 👌🏿

[@johnnylaw420]

I don't usually post, so I feel remiss in posting something critical. My guy, your videos are awesome. Your content is awesome. BUT....why you no vacuum out the floor when the seats were out. Just saying.

[@SDSBBQs]

*We were right... there I said it... no I don't feel any better. Thanks for sharing this.*

[@i2fast4u1]

Should have keep the chevy

[@mrwhite7222]

Really like this channel because you havent bought a totaled super car to rebuild yet

[@williamstru2119]

Cory Lovely soon though, lol.

[@williamstru2119]

He bought a dodge, so he won’t be able to afford to rebuild a supercar

[@myron-ut2nf]

Super helpful if you say how many bolts and what size.

[@3point1.2]

🎵🎵 I got new seats in the front Old 1's in the back I drive a Dodge truck And ma wheels are frickin' black 🎵🎵

[@Sagekable]

Fuckin cringe

[@gotthumbs2235]

Taylor, this was a huge help. I have a Gen 3 quad-cab myself and have been wanting to swap out the front and rear cloth seats for upgraded leather seats. Knowing the Gen 4's don't require a major modifications was my biggest question. I like the truck without the spacers and I think it's better to have well fitting shoes on the truck, especially when you are towing that amount of weight. Have you ordered a new vent cap for the trailer, or does it still get wet inside when it rains? She just needs some thorough tender care, not quick fixes.....because she was not maintained as well previously IMO. I have gotten as high as 26 mpg in my manual 3500. Empty of course.

[@Mr.Saephan503]

I as a person living in Oregon (24+ years) laugh at your rain talk.

[@justinw_tbss_dadvan9447]

The dodge is still the way to go. Take care of all the dumb shit and the truck will take care of you

[@Tanner731]

you gotta get an air matress for the mega cab rear seat section dude thatd be perfect for sleeping in at events

[@EmanuelBertie]

Are they 4th gen megacab seats ?

[@Poulin-vj9mb]

All you need is good drill set and some large torx set and just drill a nice hole then pound the torx in and work it out with PB or some other penetration oil usually works for me anyway

[@BIGFOOT-ENT.]

THANK YOU FOR MAKING THE LINKS TINY AT THE END

[@KT4RAM]

Decent video and informative about the 4th gen seats fitting in a 3rd gen. One thing that kinda messed with my head a bit is that it would have been a great time to at least vacuum the cab while the seats were out instead of installing the replacements over the top of all that debris. haha, As far as the parts failures on many of today's vehicles I feel that it is because most of the manufacturers no longer make their own parts. Just one of many examples: I had a 2001 Camaro SS with the SLP Package (Basically a lot of the same parts that the Vette had including the infamous LS1 piston slap) The brake rotors would warp between 2K-3K miles. They would just keep replacing them under warranty and I finally asked why they don't just fix the problem by producing a better rotor? Their answer was that they are made by a 3rd party manufacturer and it is cheaper for them to just keep replacing them under warranty than to have GM start making them. That is the dumbest thing that I had heard. This is a huge part of why we can't have nice things anymore. As far as the design of 3rd gen Dodge Ram is concerned their HVAC boxes Suck! Broken blend doors and diverter doors are a stupid design and a PITA to repair all of the different doors in that box. I still love my RAM but like any other truck that I've owned it's not without issues. Thanks for the video.

[@TheRoughGo]

Man, please keep the dodge, for real it's an amazing truck, once you get through those annoyances! Itll be well worth it!

[@Eatmydick666]

Brady Bigras just like any truck, they don’t make things perfect for a reason...

[@jamesosgood7255]

I have the same truck and I have been looking for spacers, what spacers do you have?

[@dylanmiller8661]

Time for windshield wipers !

[@kennethnewman1055]

Those are not just Dodge problems. My 2000 f250 7.3l. rubbed cooler lines went out, injectors bad, injection pressure sensor died, back pressure sensor died, and my passenger and back seat is warn. My 7.3l excursion different issues but same amount. That the deal with diesel work trucks. My wife hate my truck but I love it.

[@jacoblarson274]

its a ford.

[@BiggHoss]

Did you torque the lugs to the correct specs? Cause that's kinda why you do it

[@maxmcdonald9272]

Nice to know I can swap out my seats for a 4th gen

[@brandonMrLove]

Yeah sorry dude I’ve come to the conclusion that 3rd gens suck. I stand by my second gens all day but you will need work. I prefer the 12valve Cummins because its more reliable than a 5.9 24 valve. Im completely dumb about the 6.7l? cummins but would give it a shot for a fourth gen ram.

[@Clem_Kadidlehopper]

Agree my second gen is fantastic. I dragged my transfer case but that was my fault plowing snow with a worn chain thinking I could go one more winter....I was wrong.lol

[@brandonMrLove]

Haha im great at blowing axles in the winter. Its like i dont know how to be an adult when i see snow and ice. Lmao

[@philipnelson1104]

Get some black headlights like durtymaxjack. Also u should definately have bodevision prime it and paint it in paint match raptor liner.

[@jonathanweimane6926]

I bought a plasma cutter for getting locknuts off.. 😂 I feel you!

[@Woodie-xq1ew]

that is the perfect amount of overkill

[@brysonshires9742]

You can never be Overkill enough

[@drewholmans6035]

Will those bolt right up in a 2002 slt quadcab

[@chinito20fam]

Man..... Crazy... If i seem red flags i would check and recheck everything.. know you know.. when getting sests.. believe their is quad cab crew cab and mega. And a think a classic.. quad cab is normal seats and doors up front.. back is smaller doors and not to great of a leg room.. a crew cab is a full 4 door seats which the back is more legroom then the quad.. and the mega cab is so much soace in the back can possibly stretch your legs..and finally the single cab... Only the two seats no backseats at all..am also excited for mine.. i took a least 2 weeks finding these seats.. finally getting them shipped!! By the end of this week of mid week next week i whould habe them.. its from a 2015 all leather blacked out 450 for front seats and back.. putting it in a 2003 quad cab.. 6 inch lift starlights black suede uptop. Touchscreen. Remove old plastic and get all leather dash. 1000 dollar headlights revese kight leds. And remove the bumper for aome steel bumper up front and back.. see who can install sensors on them.. to not crash into other cars crushing them in the process😂😂 has 35 might go with 37.. but also removing the back window with the middle able to open the window for fresh air.. and replacing the center concel with same yr but just leather.. removing the dash and upgrading it to newer look... Has a led bar up top for dark areas... What else is there to do.. amd lastly big biy upgrades with brakes and pads and rotors. For heavy tires.and shocks with coils. To make the ride too quality.. rims in brown color.has allqays been my dream to oneday rebuild the truck to a bit more modern. Up to date.. and the most expensive is ceramic tint all the way around and get the fog lights to work. 15+ yrs strong and just dont want to let go of the truck. Am 23 now and just need that final touch after all this and get it in candy blue with heavy flakes.. and a reverse camera with touchscreen...

[@jordinimartini8585]

Sun coast transmissions make amazing transmission for rams, the platforms are amazing just gotta do them up right

[@drunkenmickgt9662]

I live in Inverness FL. Able auto is a great mechanic shop.

[@MichaelLewis-dj2sl]

I bought 4th gen seats for my 3rd gen, can I use 3rd gen middle seat with 4th gen seats?

[@dkaplan100]

*gets 5 seconds into video* *types "I told you so"* *resumes video*

[@PitinoPerformance]

Thinking about swapping them in my 3rd gen single cab

[@joshh4427]

Would you be interested in some afe items and a brand new banks intercooler for it. In exchange for a huge price cut and put some control arms on?

[@Lifted-Horns-4x4]

What year and model of truck did those new seats come out of?

[@coreymercorelli1779]

Any truck that is that beat up is going to have issues, Ford Ram, or Chevy. Come on man!

[@pantygnome]

My Frontier went through 3 sets of calipers in 50K miles. Also broke both rear leaf springs, bed rusted out and the AC leaked (just like this Dodge!). There is no perfect truck out there.

[@clue232]

10/10 support that Buc-ee's shirt.

[@TurboTurdBurglar]

Love the truck videos

[@Clem_Kadidlehopper]

It's not that it's a Dodge it's that it looks well abused by the previous owner. The trans lines is an issue I ran a new factory set and got a couple years before they rubbed through. So I changed everything over to teflon lined steel braid.

[@Brooke_ye]

My dad has a 4th gen Ram 2500 and I've done numerous roadtrips in it and i can say from my experiences that those seats are very comfortable.

[@vracerv]

What years front seats will fit in a 2003 Dodge ram 1500 reg cab. Thanx

[@Sulkiestzachary]

Looking like a Diesel Mechanic!

[@michaelrizzo5492]

I’m looking at a 2006 Mega cab. I’m thinking 4th gen seats for sure. Or remove the seats from my 09 Yukon?

[@Eatmydick666]

Michael Rizzo I have a 06 mega cab Laramie package. Leather wore out being my work truck. But who the fuck cares about interior, but covers for your seats if you plan on doing a lot of wear n tear...

[@jimkennedy2708]

Looked like s with the spacers and you will delay replacing the front bearings for a while ... already well whipped ...

[@FunkeJ3604]

Truck looks way better without spacers. Good call!

[@billmopar]

Yea i feel you're pain, just gotta remember its not a low mileage old man truck, its a 12 year old drifters tow pig. I agree, them late 3rd gen seats are terrible and im not a fan of the interior in general.

[@alexfigy5355]

Gotta love a reliable duramax!!

[@captkools04]

If you win the next comp, you are a God. Hope you do because you deserve it.

[@josephmalinowski6817]

but I also have a 2001 Dodge Ram 2500 diesel and I changed the front seats and center console the seats came out of possibly a 2016 or 2018 Nissan Titan the biggest truck that Nissan makes but the seats fit perfectly in my 2001 Dodge I just had a drill new bolt holes but the width the height was perfect it's not like I had a big spaces between the door the seats look like they were made for the truck the guy I bought them from must have crashed his truck but the seeds were brand new

[@bernhard8540]

thats thise cheap aftermarket lugnuts man id get some good dorman brand lugnuts and throw those ones you have as far into the woods as you can ... :)

[@mhfuXmonsta]

do you want the duramax back?

[@HashTagDan1]

6:30 ish when Taylor’s talking about the rain I’m just here like yeah that’s the normal weather in England. Out of state people doing 30 English people doing 90 coz we’re probably late for something

[@turobash0]

How I look at cars when they break it can happen to any car can even happen to brand spanking new cars that drive of the forecourt it part of the parcel of ownership of cars

[@ndubgolfer]

Seat covers front and rear. Floral pattern.

[@brianparker181]

I think the seats look good

[@filabila]

I bought a 4th gen console for my 3rd gen, will it work with 3r gen seats or only the 4th gen? thanks

[@mattspry8576]

How much did you pay for those seats?

[@gavinriggs2306]

Just let it be a brodozer Taylor

[@WelcomeToTheMadness]

Taylor is now black....Welcome on board. Your credit rating is about to take a hit, and you might start getting pulled over more frequently.

[@michealcaboose8104]

Pro tip always add grease to your lug nuts the newer the vehicle's the worse the thread or nuts! Good luck

[@josephmalinowski6817]

the problem that you're having with your AC I had the same problem with my Dodge Ram pickup the system needs to be charged it's just how it comes in two the cab it goes from the driver side to the pasture side and by the time it gets to the passenger side AC is warm because the heat of the motor so I brought it to a mechanic and he just maybe go get some AC Pro stop leak put that through evacuated and recharged my truck and the AC was fine

[@bobbyroth1991]

That part has nothing to do with Dodge..... That's the cheap Chinese lug nuts 🤔

[@michaelsaunders6853]

I've had the same problem with lug nuts like that

[@TheMajestyD]

didnt even try to clean those new seats haha

[@jorgefelix8251]

Duranax mennn why you get eid of it😩😩

[@xtune5731]

haha so true, driving through the rain has made us floridians pros, now that I'm in TN we don't have a lot of rain but when it rains it pours. I just continue through the roads while everyone else has either slowed to a crawl (which isn't safe) or pulled over.

[@dill5500]

Gonna eventually put 2nd gen seats in my 1st gen

[@brandonMrLove]

Leroy The-Savage do it. I went out and got leather second gen seats for all 3 parts for $200 bucks and they are completely unmolested and so much more comfortable than the second gen clothes seats. But make sure you get seats out of a 98 to 02 for more comfort.

[@wafflezoot]

I must have missed the episode where you fix the AC, what was it?

[@nothwac]

wafflezoot I’m wondering was it was?

[@Bataleon2320]

I know there are a ton of I told you so's. BUT like I said Duramax for the win. : D

[@ramborghininick]

Hey Taylor Ram became their own brand in 2009 and were not under dodge anymore, the 4th gens are great trucks and I wouldn’t choose a ford or Chevy over a 4th gen ram Cummins, you know nothing can beat that 6.7 Cummins and working on it is 100x easier than a Chevy or ford! I suggest you invest in a 4th gen they’re dropping in price as well since the 5th gen came out.. good luck on your tow rig setup! #cummins

[@patrickkidd764]

can you please take off the spacers for the wheels?

[@FriENTlyFire]

watch until the end

[@jakeclauson9863]

Jenky like the time I put 89 Toyota tercel seats in my 89 Toyota pickup? Yea it was weird..

[@isaacsellers4757]

I hate to say it, but maybe you should have kept the dmax maybe?

[@Dang_Jim]

Taylor, how are the Lionheart tires treating you? I was thinking of ordering some for my Tahoe.

[@sergiovazquezjr149]

Idk if you have fix the spacer issue you’ve been having! But you should get BORA spacers. Best in the market.

[@look_its_wesley8252]

I just watched this video twice

[@dangerousfreedom4965]

How much did the seats cost?

[@nismojdm5950]

$350 he literally said it in the video

[@dangerousfreedom4965]

Nismo Jdm you watch the whole vid?

[@FixItPleaseJ]

You should have cleaned the seats before you installed them. "water spot" from some spilling coffee in their lap.

[@brandonwhitmire1904]

im moving to tampa from Nc in about 4 weeks. Am i making a mistake :O lol

[@Clem_Kadidlehopper]

Yes

[@brandonwhitmire1904]

@@Clem_Kadidlehopper uh oh lmao it looks like im about to melt

[@brandensmith7703]

Are those tree of gondor from the lord of the rings gauges you're wearing? It's an odd question, but I just noticed it.

[@junior3815]

I'm still so sad you got rid of that clean LB7 for a giant turd

[@Sauerbrew777]

Dude, you can keep all that rain. Up here in north Ga, it's been raining for 3 days. Like dark outside at 1pm and rain coming in sideways. bleh!

[@jamesderrick691]

I’m pretty sure those are the EXACT same Autozone lug nuts I have on my truck. Maybe I should get different ones... or maybe I should just never take them off again

[@tripleog0069]

WHEN YOUR SAYING ALL THE BAD THINGS OF THE TRUCK ALL I HEAR IS VIDEOS COMING LET ME WATCH THEM ALL BRING THEM 🙌🙌👌👌💪🏻💪🏻💪🏻💪🏻👊👊👊...

[@TheRoughGo]

Put a 4th gen front bumper on this!

[@pimhan]

You should definetely get those seats steamcleaned, that driver seat is nasty

[@tun1034]

Skip to @9:50 you'll thank me later😏

[@randybryant9936]

You should have kept the durtymax as a back up